|
|
SERMIK_ID number under which this microscope part is placed in the database.
99297
|
PZO 20:1 0,40 microscope objective 20x
|
|
Description of this part for the microscope.
PZO microscope objective.
Manufacturer: PZO Poland
Model: 20:1 0,40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160
...
mm
Focal Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MB-10 microscope repair parts
- obiektyw do starszego mikroskopu PZO
- PZO 20:1 0.40 RMS Objektiv 33 mm
- PZO vintage 20x microscope objective 33 mm
- Lomo MBB-1 20x Mikroskopobjektiv
- Carl Zeiss Jena Lumipan 20x Mikroskop Objektiv
- Lomo Biolam 20x microscope objective
- Bresser Biolam 20x Objektiv
- PZO M-440 / MB-10 20x objective
- PZO 20x Objektiv Pilz - Ersatz
- objektiv PZO 20x a Zeiss Jena
- objetivo PZO 20x para microscopio Lomo Biolam
- objetivo 20x para microscopio Carl Zeiss Jena Lumipan
- obiettivo PZO 20x per microscopio Carl Zeiss Jena Lumipan
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MB-10
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99312
|
Carl Zeiss Jena Lumipan / Lg 20/0,40 160/0,17 microscope objective 20x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: 20/0,40 160/0,17
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal
...
Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lumipan microscope repair parts
- Carl Zeiss Jena Lumipan microscope objective 20x
- Carl Zeiss Jena Lumipan Mikroskopobjektiv 20x
- Lomo Biolam 20x Mikroskopobjektiv
- Carl Zeiss Jena L-Stativ Objektiv 20x
- Carl Zeiss Jena Lg Mikroskopobjektiv 20x
- Carl Zeiss Jena 20/0.40 160/0.17 Objektiv 33 mm
- Bresser Biolam 20x Objektiv
- Carl Zeiss Jena Nf 20x objective short 33 mm
- Carl Zeiss Jena 20x Objektiv Pilz - Ersatz
- objektiv 20x Carl Zeiss Jena Lumipan
- objetivo 20x Carl Zeiss Jena Lumipan
- objetivo 20x para microscopio Lomo Biolam
- obiettivo 20x Carl Zeiss Jena Lumipan
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Carl Zeiss Jena Lumipan 20x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lumipan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99386
|
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization
This is an objective designed for transmitted light work with a cover glass.
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Lomo 20 0.40 P Pol Objektiv mit Adapter
- Lomo 20x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 20x 33 mm
- ЛОМО 20 0.40 П объектив
- polarizační objektiv Lomo 20x
- objetivo de polarización Lomo 20x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 20x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 20x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a polarisation microscope and need an objective lens with this magnification
-
If you only need a slider to use with other objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99387
|
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Super-Macro-Photo objective
- 9:1 Makroobjektiv
- Lomo Plan 9x 0.20 P Pol Objektiv mit Adapter
- Lomo 9x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 9x 33 mm
- Lomo Plan 9x Makroobjektiv Focus Stacking
- ЛОМО Plan 9x 0.20 П объектив
- polarizační objektiv Lomo 9x
- objetivo de polarización Lomo 9x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 9x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 9x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99385
|
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Super-Macro-Photo objective
- 3.7:1 Makroobjektiv
- Lomo 3.7 0.11 P Pol Objektiv mit Adapter
- Lomo 3.7x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 3.7x 33 mm
- Lomo 3.7x Makroobjektiv Focus Stacking
- ЛОМО 3.7 0.11 П объектив
- polarizační objektiv Lomo 3.7x
- objetivo de polarización Lomo 3.7x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 3.7x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 3.7x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99438
|
PZO 5/0.15 microscope objective 5x for macro photography | for Carl Zeiss Jena and Lomo Biolam
|
|
Description of this part for the microscope.
PZO microscope objective 5/0.15 - a model used in microscopes, but also very often used for macro photography.
Basic technical parameters:
- Manufacturer: PZO
...
Poland
- Model: 5/0.15 160/-
- Alternative model marking: 5/0.15 160/0
- Magnification: 5x
- Numerical aperture N.A.: 0.15
- Correction: achromatic
- Focal length FL: 33 mm
- Tube length: 160 mm
- Cover glass: not required, but may be used
- Immersion: no (dry objective)
- Thread: RMS
This model has a metal housing with no lens at its end. Additionally, this housing can be unscrewed without affecting the operation of the objective - resulting in a relatively large working distance of more than 20 mm.
Three features:
- large working distance exceeding 20 mm
- exceptionally high numerical aperture N.A. of 0.15
- achromatic correction allowing direct projection use
make this relatively uncommon model very frequently chosen for macro photography using a microscope objective connected to a camera (focus stacking).
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Lomo Biolam
- Lomo MBB-1A
- Carl Zeiss Jena LG / Lu / Lumipan
- Carl Zeiss Jena Nf
- Olympus CH
Note! Please note that the FL = 33 mm focal length means that this objective DOES NOT FIT the following microscopes:
- PZO Biolar
- PZO Studar
Early versions of this objective (with low serial numbers) have the engraved marking 5/0.15 160/0 suggesting that the objective is intended for use without a cover glass. This is true, but more precisely this objective can work both without a cover glass and with one. In newer versions the engraving already reads 5/0.15 160/- where this "minus" already means "indifferent".
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MS-16 microscope repair parts
- PZO 5x microscope objective
- PZO Poland 5x Mikroskopobjektiv
- super macro photo stacking
- PZO 5/0.15 Objektiv Makrofotografie Focus Stacking
- PZO 5x objective for Carl Zeiss Jena Lumipan / Lg
- Lomo Biolam 5x Objektiv PZO
- PZO MS-16 5x objective
- objektiv PZO 5x pro makrofotografii
- objetivo PZO 5x para macrofotografía
- objetivo 5x para microscopio Carl Zeiss Jena Lumipan
- obiettivo PZO 5x per macrofotografia
- obiettivo 5x per microscopio Carl Zeiss Jena Lumipan
- obiektyw PZO 5x do makrofotografii
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
5
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MS-16
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a high resolution objective for macro photography
-
if you need a 5x microscope objective with high numerical aperture
-
when you need a good quality 5x objective for an inverted microscope
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99442
|
Carl Zeiss Jena Lumipan / Lg 40 0,65 0,17 microscope objective 40x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: 40 0,65 0,17
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal Length: 33
...
mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Lomo Biolam
- Lomo MBB-1A
- PZO MB-10
- Olympus CH
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lumipan microscope repair parts
- Carl Zeiss Jena Lumipan microscope objective
- Carl Zeiss Jena Lumipan Mikroskopobjektiv
- Lomo Biolam 40x Mikroskopobjektiv
- Carl Zeiss Jena Lg Mikroskopobjektiv
- Carl Zeiss Jena 40/0.65 0.17 Objektiv 33 mm
- Bresser Biolam 40x Objektiv
- Carl Zeiss Jena Nf 40x short objective 33 mm
- Carl Zeiss Jena 40x Frontlinse zerkratzt - Ersatz
- objektiv 40x Carl Zeiss Jena Lumipan
- objetivo 40x Carl Zeiss Jena Lumipan
- objetivo 40x para microscopio Lomo Biolam
- obiettivo 40x Carl Zeiss Jena Lumipan
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Carl Zeiss Jena Lumipan 40x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
20 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lumipan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99354
|
Olympus CH 40 0,65 0,17 microscope objective 40x, also for Carl Zeiss Jena
|
|
Description of this part for the microscope.
Manufacturer: Olympus Tokyo
Model: 40 0,65 0,17 Japan
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal
...
Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Carl Zeiss Jena Lg
- Carl Zeiss Jena Lumipan
- Lomo Biolam
- Lomo MBB-1A
- PZO MB-10
- Nikon S
- Olympus KHC
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus CH microscope repair parts
- Olympus CH Mikroskopobjektiv
- Nikon S microscope objective
- Carl Zeiss Jena Lumipan microscope objective
- Carl Zeiss Jena Lumipan Mikroskopobjektiv
- Lomo Biolam 40x Mikroskopobjektiv
- Carl Zeiss Jena Lg Mikroskopobjektiv
- Olympus KHC Mikroskop Objektiv
- Olympus CH 40/0.65 0.17 Objektiv 33 mm
- Olympus CH 40x short barrel objective
- Olympus KHC / Nikon S 40x Objektiv
- Olympus CH 40x Frontlinse zerkratzt - Ersatz
- objektiv Olympus CH 40x
- objetivo Olympus CH 40x
- objetivo 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo Olympus CH 40x
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Olympus CH 40x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
CH
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99498
|
PZO 40/0,65 170/0,17 microscope objective RMS 40x
|
|
Description of this part for the microscope.
PZO Poland microscope objective with 40x magnification, 170 mm tube length and 33 mm parfocal length (the so-called short version).
Basic parameters of this PZO
...
microscope objective:
Manufacturer: PZO Poland
Model: 40/0.65 170/0.17
Magnification: 40x
Correction: Achromat
Numerical aperture: 0.65
Tube length: 170 mm (very rare in PZO)
Focal length: 33 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
Please note that this objective was designed for microscopes with a 170 mm tube length. This refers to older PZO microscope models:
- PZO MinO
- PZO M100
- PZO ML1 / ML2 and ML3
- PZO MB1 and MB2
- however, this is definitely not a complete list
It can be used with any microscope capable of accepting RMS objectives with TL=170 mm and FL=33 mm. After installing a 12 mm adapter, this objective will of course have FL=45 mm.
Many microscopes from the 1950s and 1960s support both TL=170 mm and TL=160 mm objectives. Interestingly, in many microscopes designed for a 160 mm tube length it is possible to use objectives designed for a 170 mm tube length if the microscope eyepieces are pulled out by 10 mm in the head tube (a solution used in Leitz Wetzlar microscopes).
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MinO microscope repair parts
- PZO Poland vintage 170 mm microscope objective
- obiektyw do starszego mikroskopu PZO
- PZO Poland 170 mm RMS Mikroskopobjektiv
- PZO 40x Mikroskopobjektiv mit 33 mm Abgleichlänge
- PZO 40/0.65 170/0.17 Objektiv
- PZO ML1 / ML2 / M-100 40x objective 33 mm
- objektiv PZO 40x 170 mm
- objetivo PZO 40x 170 mm
- objetivo microscopio antiguo PZO
- obiettivo PZO 40x 170 mm
- obiettivo microscopio d'epoca PZO
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MinO
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have an older PZO microscope without objectives and would like to complete it using original parts
-
If you have a compatible microscope that lacks an objective of this magnification and would like to complete the set
-
...
-
If you already have such an objective but it is damaged or of very poor quality
-
If you are cautious and would like to keep such an objective as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99512
|
Lomo 20 0,40 RMS microscope objective 20x LZOS Lytkarino S/N 01234
|
|
Description of this part for the microscope.
20x microscope objective made by Lomo with the LZOS Lytkarino factory logo and a unique "golden" serial number.
Manufacturer: LZOS Lytkarino (commonly,
...
although incorrectly, referred to as "Lomo")
Model: 20 0,40
Magnification: 20x
Correction: Achromat
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: 0.17 mm
Immersion: no
Thread: RMS
Serial number: 01234
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=33 mm.
After installing a 12 mm adapter, this combination of adapter and objective will function as an objective with FL=45 mm.
This objective is attractive mainly to collectors because:
- there are very few microscope objectives with the LZOS logo on the secondary market
- the objective has a so-called "golden serial number": 01234
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo LZOS Lytkarino microscope objective
- LZOS Mikroskopobjektiv
- Lomo Biolam 20x Mikroskopobjektiv
- Lomo 20 0.40 RMS Objektiv 33 mm
- LZOS Lytkarino 20x objective Carl Zeiss Jena Lumipan
- Bresser Biolam 20x Objektiv
- objektiv LOMO 20x a Zeiss Jena
- objetivo LOMO 20x para microscopio Lomo Biolam
- objetivo 20x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 20x per microscopio Lomo Biolam
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy LOMO 20x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
100 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
