Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
2 - Thumbnail photo showing this microscope part. Zeiss 5-pos. RMS revolver nosepiece (turret) for Carl Zeiss Axiovert 25 biological inverted microscope. - thumbnail [ 00442 ]	SERMIK_ID number under which this microscope part is placed in the database. 00442	Zeiss Axiovert 25 microscope nosepiece revolver turret	The name of this microscope part. 5-pos. RMS revolver nosepiece (turret) for Carl Zeiss Axiovert 25 biological inverted microscope.	Description of this part for the microscope. It contains the assembly part, empty, i.e. without bearings and slides. There is a rubber band around the revolver to facilitate rotation. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts nosepiece revolver revolving turret rewolwer carousel miska obiektywowa Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 50 €	Name of the category to which this microscope part is classified. Revolvers (turrets)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. when the thread for screwing in lenses breaks sometimes the revolver seizes, e.g. because of old grease. Sometimes, during repair, elements are lost (screw, click-stop or bearing balls) and a new revolver must be installed.	0000-00-00 00:00:00
3 - Thumbnail photo showing this microscope part. Zeiss Power supply (internal) 6V 30W for the Carl Zeiss Axiovert 25 inverted biological microscope - thumbnail [ 00441 ]	SERMIK_ID number under which this microscope part is placed in the database. 00441	Zeiss Axiovert 25 microscope power supply trafo 6V 30W	The name of this microscope part. Power supply (internal) 6V 30W for the Carl Zeiss Axiovert 25 inverted biological microscope	Description of this part for the microscope. Set with a switch, power plug and a sheet metal housing. So-called transformer, "electrics", electric circuit, electronic board. Converts 220V-240V to 6V max. ... 30W for halogen lighting. This is a complete element integrated with part of the housing. Screws are included. The set includes an ON/OFF switch for mounting in the housing. The set DOES NOT include a light intensity regulator. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts Zeiss Axiovert 25 trafo transformer power supply zasilacz transformator lampe lamp mikroskop microscope Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 75 €	Name of the category to which this microscope part is classified. Power supplies (transformers)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. - jest duża szansa, że elektryka jest taka sama w wielu innych Axio (Axiovert, Axioskop, Axio Scope).	A list of potential uses for this part and when it might be needed. when the power supply (electricity) burns out as a result of a defect, storm, mains overvoltage, liquid flooding, short circuit or e.g. when we make a mistake when modifying the lighting. if the switch or power plug is damaged, sometimes the entire power supply is replaced, but it is worth checking whether such a small element is available for sale separately.	0000-00-00 00:00:00
4 - Thumbnail photo showing this microscope part. Zeiss Condenser A=0.2 (number 451236) for the Carl Zeiss Axiovert 25 inverted biological microscope. - thumbnail [ 00440 ]	SERMIK_ID number under which this microscope part is placed in the database. 00440	Zeiss Axiovert 25 microscope 0,2 condenser	The name of this microscope part. Condenser A=0.2 (number 451236) for the Carl Zeiss Axiovert 25 inverted biological microscope.	Description of this part for the microscope. Contains an empty slot for a filter slider or phase contrast discs. Contains an iris diaphragm. Designed mainly for work with low magnifications due to the ... numerical aperture. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts Zeiss Axiovert 25 inverted microscope condenser odwrócony Mikroskop Kondensor Mikroskopkondensor invers Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 50 €	Name of the category to which this microscope part is classified. Condensers	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. - bardzo możliwe, że pasuje do innych Axiovert	A list of potential uses for this part and when it might be needed. if your microscope is missing a condenser if you have a condenser with too high a numerical aperture if you have a broken mounting part if you have a damaged lens or iris diaphragm (check if these small parts can be purchased separately)	0000-00-00 00:00:00
5 - Thumbnail photo showing this microscope part. Zeiss Slider for the condenser (451235) of the Carl Zeiss Axiovert 25 (451200) inverted biological microscope. - thumbnail [ 00439 ]	SERMIK_ID number under which this microscope part is placed in the database. 00439	Zeiss Axiovert 25 (451200) microscope condenser PH0 slider (451235)	The name of this microscope part. Slider for the condenser (451235) of the Carl Zeiss Axiovert 25 (451200) inverted biological microscope.	Description of this part for the microscope. Contains a Ph0 phase contrast disc for low magnification objectives. It has a gray illumination filter and an empty field for another DF or Ph disc. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts Phase contrast Phasenkontrast kontrast fazowy microscope Mikroskop odwrócony Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 75 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. - zapewne pasuje też do innych kondensorów - zapewne pasuje do kondensorów innych mikroskopów odwróconych Zeiss	A list of potential uses for this part and when it might be needed. when the condenser lacks a slider when the slider you have does not have a Ph0 disc (look for it, maybe this disc is available separately) when you want to have an additional slider for DIY discs, e.g. dark field	0000-00-00 00:00:00
6 - Thumbnail photo showing this microscope part. Zeiss Halogen illuminator for the Carl Zeiss Axiovert 25 inverted biological microscope - thumbnail [ 00438 ]	SERMIK_ID number under which this microscope part is placed in the database. 00438	Zeiss Axiovert 25 microscoe halogen illuminator, slider, filter	The name of this microscope part. Halogen illuminator for the Carl Zeiss Axiovert 25 inverted biological microscope	Description of this part for the microscope. Set with a 6V 25W halogen bulb, housing, slider containing a mirror NG filter and cable for connection to the power supply. The set includes all the necessary ... screws to attach to the arm. The slider has two places - one has a removable filter and the other is empty. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts Lamp bulb lampa oświetlacz Beleuchter Lamphouse Lampenhaus Lamphousing żarówka filtr wsówka silder insert Schieber Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 50 €	Name of the category to which this microscope part is classified. Illuminators	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. - zapewne pasuje do innych mikroskopów odwróconych Zeiss	A list of potential uses for this part and when it might be needed. in secondary market microscopes the illuminator is very often missing. the housing breaks very often, so the illuminator needs to be replaced	0000-00-00 00:00:00
7 - Thumbnail photo showing this microscope part. Zeiss Metal arm (holder, part of the housing) for the illuminator and condenser for the Carl Zeiss Axiovert 25 inverted biological microscope. - thumbnail [ 00437 ]	SERMIK_ID number under which this microscope part is placed in the database. 00437	Zeiss Axiovert 25 microscope illuminator and condenser arm holder	The name of this microscope part. Metal arm (holder, part of the housing) for the illuminator and condenser for the Carl Zeiss Axiovert 25 inverted biological microscope.	Description of this part for the microscope. The set includes mounting screws, a rear cover (the power cable for the illuminator is routed under this cover) and a sliding sled for mounting the condenser. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 25 microscope repair parts Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 50 €	Name of the category to which this microscope part is classified. Housings and its parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 25 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. - być może pasuje do innych odwróconych mikroskopów Zeiss	A list of potential uses for this part and when it might be needed. this arm breaks very often, so many microscopes on the secondary market do not have it, so you have to buy it if you break the arm you already have if the condenser guide sled is damaged	0000-00-00 00:00:00
16 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Cover for the vertical movement (focusing) rack for the Carl Zeiss Jena SM-xx (SM-16 / SM-20) stereo microscope. - thumbnail [ 00448 ]	SERMIK_ID number under which this microscope part is placed in the database. 00448	Carl Zeiss Jena SMxx (SM16 / SM20) focusing rack cover	The name of this microscope part. Cover for the vertical movement (focusing) rack for the Carl Zeiss Jena SM-xx (SM-16 / SM-20) stereo microscope.	Description of this part for the microscope. Prevents the entire rack from moving out of reach. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena SMxx microscope repair parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 5 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SMxx Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. SM-16 SM-20	A list of potential uses for this part and when it might be needed. These microscopes are old and the toothed rack (so-called pinion) has probably been replaced during their operation. Very often, after such replacements, the microscope is missing the cover for the rack.	0000-00-00 00:00:00
17 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Vertical movement (focusing) rack for the Carl Zeiss Jena SM-xx (SM-16 / SM-20) stereo microscope. - thumbnail [ 00449 ]	SERMIK_ID number under which this microscope part is placed in the database. 00449	Carl Zeiss Jena SMxx (SM16 / SM20) focusing rack	The name of this microscope part. Vertical movement (focusing) rack for the Carl Zeiss Jena SM-xx (SM-16 / SM-20) stereo microscope.	Description of this part for the microscope. Original, metal, not plastic 3D printed. Includes all screws and mounting hardware. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena SMxx microscope repair parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SMxx Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. SM-16 SM-20	A list of potential uses for this part and when it might be needed. The toothed rack (so-called pinion) is one of the fastest wearing components.	0000-00-00 00:00:00
20 - Thumbnail photo showing this microscope part. Winkel-Zeiss Vintage Winkel-Zeiss Göttingen H.I. 90x Ap. 1,30 RMS microscope objective - thumbnail [ 00452 ]	SERMIK_ID number under which this microscope part is placed in the database. 00452	Vintage HI 90x Ap. 1,30 RMS microscope objective	The name of this microscope part. Vintage Winkel-Zeiss Göttingen H.I. 90x Ap. 1,30 RMS microscope objective	Description of this part for the microscope. Microscope objective. Manufacturer: Winkel-Zeiss Göttingen Magnification: 90x Numerical aperture: 1.30 Cover glass: yes, 0.17 mm Thread: RMS Tubus ... lenght: not sure (finite) Focal lenght: not sure (vintage) Immersion: yes, Oil Names, descriptions, terms, and search contexts under which this part is searched. Winkel-Zeiss Vintage microscope repair parts vintage antique Winkel-Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Winkel-Zeiss Winkel-Zeiss Göttingen (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Praktycznie każdy 160) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00
21 - Thumbnail photo showing this microscope part. Winkel-Zeiss Vintage Winkel-Zeiss Göttingen 42x Ap. 0,85 RMS microscope objective - thumbnail [ 00451 ]	SERMIK_ID number under which this microscope part is placed in the database. 00451	Vintage 42x Ap. 0,85 RMS microscope objective	The name of this microscope part. Vintage Winkel-Zeiss Göttingen 42x Ap. 0,85 RMS microscope objective	Description of this part for the microscope. Microscope objective. Manufacturer: Winkel-Zeiss Göttingen Magnification: 42x Numerical aperture: 0.85 Cover glass: yes, 0.17 mm Thread: RMS Tubus ... length: not sure (finite) Focal length: not sure (vintage) Immersion: no (dry, air) Names, descriptions, terms, and search contexts under which this part is searched. Winkel-Zeiss Vintage microscope repair parts vintage antique Winkel-Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Winkel-Zeiss Winkel-Zeiss Göttingen (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Praktycznie każdy 160) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00
22 - Thumbnail photo showing this microscope part. Winkel-Zeiss Vintage Winkel-Zeiss Göttingen 10x Ap. 0,25 RMS microscope objective - thumbnail [ 00450 ]	SERMIK_ID number under which this microscope part is placed in the database. 00450	Vintage 10x Ap. 0,25 RMS microscope objective	The name of this microscope part. Vintage Winkel-Zeiss Göttingen 10x Ap. 0,25 RMS microscope objective	Description of this part for the microscope. Microscope objective. Manufacturer: Winkel-Zeiss Göttingen Magnification: 10x Numerical aperture: 0.25 Cover glass: no Thread: RMS Tubus length: not ... sure (finite) Focal length: not sure (vintage) Immersion: no (dry, air) Names, descriptions, terms, and search contexts under which this part is searched. Winkel-Zeiss Vintage microscope repair parts vintage antique Winkel-Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Winkel-Zeiss Winkel-Zeiss Göttingen (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Praktycznie każdy 160) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00
32 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Infinity tube lens including mounting turret. - thumbnail [ 00461 ]	SERMIK_ID number under which this microscope part is placed in the database. 00461	Infinity Tubuslinse (tube lens) on turret.	The name of this microscope part. Infinity tube lens including mounting turret.	Description of this part for the microscope. A cap is included in the set, because this lens is permanently mounted and even though it is in the revolver, it does not rotate. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Lenses	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU-2	A list of potential uses for this part and when it might be needed. if your lens is delaminated, cracked, destroyed by fungus if you want a second revolver to change it to a rotating one and play with other lenses or DIY filters	0000-00-00 00:00:00
33 - Thumbnail photo showing this microscope part. Carl Zeiss Jena EPI (reflected light) objective-cooperating lenses including mounting turret. - thumbnail [ 00462 ]	SERMIK_ID number under which this microscope part is placed in the database. 00462	EPI (reflected light) objective lenses on turret.	The name of this microscope part. EPI (reflected light) objective-cooperating lenses including mounting turret.	Description of this part for the microscope. All lenses: 0, 4, 10, 25, and 63 for objecties with these magnifications. The entire set includes mounting screws - as shown in the pictures. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Lenses	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU-2	A list of potential uses for this part and when it might be needed. if your lenses are delaminated, cracked, damaged by fungus if the tube outlet for the illuminator is bent (but check anyway, maybe I have the tube itself separately) if you don't have or have broken centering screws (check, maybe I have the screws themselves separately)	0000-00-00 00:00:00
38 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Pollum viewfinder (eyepiece) control cable with plug. - thumbnail [ 00468 ]	SERMIK_ID number under which this microscope part is placed in the database. 00468	Control Cable for Pollum Viewfinder Eyepiece	The name of this microscope part. Pollum viewfinder (eyepiece) control cable with plug.	Description of this part for the microscope. The wire is cut on one end. On the other side there is a plug. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena and microscope repair parts Viewfinder eyepiece foto photo Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 5 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. and Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Optic) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Laboval-3	A list of potential uses for this part and when it might be needed. pins inside the plug sometimes break sometimes devices that have been scrapped from use in large plants appear on the secondary market. In such cases, the cables and plugs are often cut off.	0000-00-00 00:00:00
39 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Pollum viewfinder (eyepiece) optical fiber cable with angled tip. - thumbnail [ 00467 ]	SERMIK_ID number under which this microscope part is placed in the database. 00467	Fiber Optic Cable for Pollum Eyepiece Viewfinder	The name of this microscope part. Pollum viewfinder (eyepiece) optical fiber cable with angled tip.	Description of this part for the microscope. The tip can be detached and used separately, just like a fiber optic cable. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena and microscope repair parts Viewfinder eyepiece foto photo fiber optic faser Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. and Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Optic) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Laboval-3	A list of potential uses for this part and when it might be needed. sometimes on the secondary market there appear devices that have been scrapped from use in large plants. In such cases, the cables and plugs are often cut off.	0000-00-00 00:00:00
42 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Filter holder for eye protection when working with UV light (fluorescence, HBO, mercury bulb). - thumbnail [ 00499 ]	SERMIK_ID number under which this microscope part is placed in the database. 00499	Fluorescence eye protection filter holder	The name of this microscope part. Filter holder for eye protection when working with UV light (fluorescence, HBO, mercury bulb).	Description of this part for the microscope. The holder attaches to the tube, above the revolver, below the head. It holds a plastic orange filter that protects eyes from UV light (filter not included - ... only the holder is provided). Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenalumar microscope repair parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Accessories	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenalumar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Być może pasuje też do Jenamed Fluoreszenz (nie jestem pewien)	A list of potential uses for this part and when it might be needed. Second-hand Jenalumar microscopes often lack this original handle. Sometimes this handle breaks off	0000-00-00 00:00:00
50 - Thumbnail photo showing this microscope part. Zeiss 12V 100W internal power supply (451405-9901) for the Zeiss Axioskop biological microscope. - thumbnail [ 00506 ]	SERMIK_ID number under which this microscope part is placed in the database. 00506	Zeiss Axioskop 12v microscope power supply trafo	The name of this microscope part. 12V 100W internal power supply (451405-9901) for the Zeiss Axioskop biological microscope.	Description of this part for the microscope. With potentiometer. Also known as a transformer, "electrics," and an electrical (electronic) board. The set does not include a bulb. The set does not include an ... ON-OFF switch. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axioskop microscope repair parts Axio Scope Axioscope Microscope transformer power supply electric electronic circuit platine switch potentiometer lamp bulb housing Mikroskop Trafo Netzteil Lampe Birne Glühbirne Lampenhaus Schalter elektrik zasilacz elektryka elektronika płytka elektroniczna żarówka obudowa włącznik przełącznik potencjometr Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Power supplies (transformers)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axioskop Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if the power supply (electrical component) burns out due to a fault, storm, mains overvoltage, liquid spillage, short circuit, or, for example, an error in modifying the lighting. if the potentiometer is damaged.	0000-00-00 00:00:00
52 - Thumbnail photo showing this microscope part. Zeiss Power supply 451487-0108 450985-1002 (internal) 6V 20W for the Zeiss Axioskop 2 biological microscope - thumbnail [ 00505 ]	SERMIK_ID number under which this microscope part is placed in the database. 00505	Zeiss Axioskop 2 microscope power supply trafo 6V	The name of this microscope part. Power supply 451487-0108 450985-1002 (internal) 6V 20W for the Zeiss Axioskop 2 biological microscope	Description of this part for the microscope. With potentiometer, bulb holder, and halogen bulb. So-called trafo, transformer, "electrics", electrical (electronic) board. Transformer Zeiss Part Number P/N CZ ... 45 14 87-0108. On electronic board P/N 450985-1002 D2KW03/97. Potentiometer J3 47K/1 52 K-H-C Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axioskop 2 microscope repair parts Axio Scope Axioscope Microscope transformer power supply electric electronic circuit platine switch potentiometer lamp bulb housing Mikroskop Trafo Netzteil Lampe Birne Glühbirne Lampenhaus Schalter elektrik zasilacz elektryka elektronika płytka elektroniczna żarówka obudowa włącznik przełącznik potencjometr Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Power supplies (transformers)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axioskop 2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if the power supply (electrical component) burns out due to a fault, storm, power surge, liquid spillage, short circuit, or, for example, an error in modifying the lighting. if the potentiometer is damaged. if the bulb housing is damaged.	0000-00-00 00:00:00
68 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Achromat 20x / 0,45 oo/0,17-A microscope objective with M25 thread Jenamed. - thumbnail [ 00522 ]	SERMIK_ID number under which this microscope part is placed in the database. 00522	Carl Zeiss Jena 20x Achromat M25-thread microscope objective Jenamed	The name of this microscope part. Carl Zeiss Jena Achromat 20x / 0,45 oo/0,17-A microscope objective with M25 thread Jenamed.	Description of this part for the microscope. Perfect exterior and optics. It's hard to find a lens in this condition on the used market. Manufacturer: Carl Zeiss Jena Magnification: 20x Model: Achromat ... 20x / 0.45 oo/0.17-A Color correction: Achromat Numerical aperture: 0.45 Tube length: infinity Focal length: not sure Cover glass: 0.17 mm Immersion: no Thread: M25 This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenalab microscope repair parts Leica DMLS Leica DMLB Leica DM1000 Jenalab Jenamed Jenamed-2 Jenaval Jenalumar microscope objective infinity Mikroskopobjektiv Mikroskop Objektiv unendlich Unendlichkeit objektyw nieskończoność nieskończony Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenalab Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Jenalab Jenaval Jenalumar	A list of potential uses for this part and when it might be needed. Jenamed or Jenalab microscopes often don't have a 20x objective lens installed. If you have one, but it's of very poor quality or damaged. If you're cautious and want to have one as a spare.	0000-00-00 00:00:00
71 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Achromat HI 100x / 1,25 oo/0,17-A - Oil microscope objective with M25 thread - thumbnail [ 00521 ]	SERMIK_ID number under which this microscope part is placed in the database. 00521	Carl Zeiss Jena Achromat HI 100x M25-thread microscope objective	The name of this microscope part. Carl Zeiss Jena Achromat HI 100x / 1,25 oo/0,17-A - Oil microscope objective with M25 thread	Description of this part for the microscope. Perfect exterior and optics. It's hard to find a lens in this condition on the used market. Manufacturer: Carl Zeiss Jena Magnification: 100x Model: ... Achromat HI 100x / 1,25 oo/0.17-A Color correction: Achromat Numerical aperture: 1,25 Tube length: infinity Focal length: not sure Cover glass: 0.17 mm Immersion: yes, oil Thread: M25 This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenalab microscope repair parts Leica DMLS Leica DMLB Leica DM1000 Jenalab Jenamed Jenamed-2 Jenaval Jenalumar microscope objective infinity immerjon Mikroskopobjektiv Oel Mikroskop Objektiv unendlich Unendlichkeit objektyw nieskończoność nieskończony immersyjny olejowy Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 89 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenalab Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Jenalab Jenaval Jenalumar DMLS DMLB	A list of potential uses for this part and when it might be needed. If you have a microscope that doesn't have an objective lens with this magnification If you have such a lens, but it's of very poor quality or damaged If you're cautious and want to have such a lens on hand	0000-00-00 00:00:00
80 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Specimen holder for the stage of the Carl Zeiss Jena BK 70x50 toolmakers measuring microscope - thumbnail [ 00533 ]	SERMIK_ID number under which this microscope part is placed in the database. 00533	Carl Zeiss Jena BK 70x50 Measuring Toolmakers microscope specimen clip	The name of this microscope part. Specimen holder for the stage of the Carl Zeiss Jena BK 70x50 toolmakers measuring microscope	Description of this part for the microscope. Single (1 pc.), threaded specimen holder for the stage. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena BK 70x50 microscope repair parts Specimen holder Präparathalter clips Objekthalter Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. BK 70x50 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. very often in toolmakers / measuring / metallographic microscopes available on the secondary market this element is missing	0000-00-00 00:00:00
83 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Microscope condenser 0.20 for Carl Zeiss Jena Jenaval / Jenalumar microscope with top lens and iris diaphragm. - thumbnail [ 00530 ]	SERMIK_ID number under which this microscope part is placed in the database. 00530	Carl Zeiss Jena Jenaval / Jenalumar 0,20 microscope condenser lens with iris diaphragm	The name of this microscope part. Microscope condenser 0.20 for Carl Zeiss Jena Jenaval / Jenalumar microscope with top lens and iris diaphragm.	Description of this part for the microscope. This is a component of the large double condenser used in Carl Zeiss Jena Jenalumar and Jenaval microscopes. - Numerical aperture (N.A.): 0.20 - Removable upper ... lens: yes - Iris diaphragm: yes - Type: Brightfield condenser for transmitted light If you're not looking for this entire part, ask if I have separate components for sale, such as a screw-on ring or lenses. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenaval microscope repair parts Carl Zeiss Jena Jenaval Jenalumar microscope Mikroskop condenser Kondensor przysłona irysowa listki blenda iris diaphragm diafragma Blende Irisblende soczewka lens Linse Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 89 €	Name of the category to which this microscope part is classified. Condensers	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenaval Jenalumar	A list of potential uses for this part and when it might be needed. If you have a condenser without 0,20 lens If you have a 0.20 condenser with a damaged top lens If you have a 0.20 condenser with a damaged or missing iris diaphragm If you are building your own DIY	0000-00-00 00:00:00
84 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Centering screw for the double condenser of the Carl Zeiss Jena Jenaval and Jenalumar microscope. - thumbnail [ 00535 ]	SERMIK_ID number under which this microscope part is placed in the database. 00535	Carl Zeiss Jena Jenaval Jenalumar microscope condenser centering screw	The name of this microscope part. Centering screw for the double condenser of the Carl Zeiss Jena Jenaval and Jenalumar microscope.	Description of this part for the microscope. The dual brightfield transmitted light microscope condenser of the Carl Zeiss Jena Jenaval and Jenalumar microscopes has a total of four centering screws - ... two for each condenser. This offer is for a single centering screw. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenaval microscope repair parts Carl Zeiss Jena Jenaval Jenalumar Mikroskop microscope condenser Kondensor Mikroskopkondensor Apl. 0 9 śruba centrująca Center Schraube centering screw gwint Gewinde Thread. Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 4	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Screws	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenaval Jenalumar	A list of potential uses for this part and when it might be needed. The centering screw often bends or breaks. The centering screw is often missing from the condensers of used Carl Zeiss Jena Jenaval and Jenalumar microscopes.	0000-00-00 00:00:00
85 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Spring screw for Carl Zeiss Jena Jenaval and Jenalumar microscope condenser. - thumbnail [ 00534 ]	SERMIK_ID number under which this microscope part is placed in the database. 00534	Carl Zeiss Jena Jenaval Jenalumar microscope spring-loaded condenser screw.	The name of this microscope part. Spring screw for Carl Zeiss Jena Jenaval and Jenalumar microscope condenser.	Description of this part for the microscope. Complete spring bolt: - mounting thread - pressure insert - screw-in spring Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenaval microscope repair parts Docisk śruba sprężyna spring screw Schraube microscope Mikroskop Jenalumar Jenaval condenser kondensor Zeiss replacement parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Screws	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenaval Jenalumar	A list of potential uses for this part and when it might be needed. service part	0000-00-00 00:00:00
86 - Thumbnail photo showing this microscope part. Zeiss Mirror prism with dovetail and lower bottom lens for Zeiss West Germany microscope 473012-9902 binocular head - thumbnail [ 00537 ]	SERMIK_ID number under which this microscope part is placed in the database. 00537	Zeiss microscope binocular head 473012-9902 mirror prism with dovetail and lower bottom lens / Carl Zeiss West Germany	The name of this microscope part. Mirror prism with dovetail and lower bottom lens for Zeiss West Germany microscope 473012-9902 binocular head	Description of this part for the microscope. This is the lower part of a gray Carl Zeiss West Germany binocular head (Model 47 30 12 - 9902). - Right angle prism/mirror prism/mirror - Dovetail/mounting ... connector for the microscope body - Dovetail connector diameter: 43 mm - Lower bottom lens The Zeiss 473012-9902 head fits Zeiss Universal Microscopes, Photomicroscope II/Photomicroscope III, Ultraphot II, polarizing, metallographic, and inverted microscopes, among others. It is sometimes used with Standard microscopes. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Pryzmat lustro soczewka złączka jaskółczy ogon soczewka Umlenk Spiegel Prisma Linse Lens mirror prism Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Prisms	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. if your head is delaminating, chipped, cracked, scratched, or discolored on the prism if the mirror surface is oxidized if the lower bottom lens is cracked if fungus (mold) has destroyed the anti-reflective surface if your dovetail is damaged	0000-00-00 00:00:00
87 - Thumbnail photo showing this microscope part. Zeiss Eyepiece tube for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00536 ]	SERMIK_ID number under which this microscope part is placed in the database. 00536	Zeiss microscope eyepiece tubus for Zeiss 473012-9902 binocular head	The name of this microscope part. Eyepiece tube for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. The eyepiece mounting tube has a diameter of 23.2 mm. The tube has a slot for use with POL polarizing eyepieces (including measuring and DIC/DIK). The tube is universal ... ? there is no difference between right and left lenses. It has a pin on the bottom for operating the interpupillary distance adjustment mechanism. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Okulary okular Okulare Eyepieces Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head Tube Tubus Rohr microscope mikroskop. Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. Very often, this tube is dented and the eyepiece cannot be inserted into it. If you have a different head with identical tubes but without support for Pol / DIC / DIK eyepieces and want to replace them	0000-00-00 00:00:00
88 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Mikrotar 3cm Achr.3 lens for Carl Zeiss Jena pancratic condenser (Lumipan, Nf, Nu, Amplival microscope) - thumbnail [ 00539 ]	SERMIK_ID number under which this microscope part is placed in the database. 00539	Carl Zeiss Jena Mikrotar 3cm Achr.3 microscope Lumipan Nf Amplival NU pancratic condenser lens	The name of this microscope part. Mikrotar 3cm Achr.3 lens for Carl Zeiss Jena pancratic condenser (Lumipan, Nf, Nu, Amplival microscope)	Description of this part for the microscope. Upper lens for low-power objectives for the Carl Zeiss Jena pancratic condenser. The Carl Zeiss Jena pancratic condenser is a triple condenser with the following ... lenses: - N.A. 0.3 for low-power objectives (this is the lens offered here) - N.A. up to 1.4 (variable aperture) for high resolution and magnification - oil dark field lens (cardioid condenser) This condenser is used in Carl Zeiss Jena microscopes: - Nf - Nu / Nu2 - Lumipan - Amplival (gray condenser) but can also be mounted in the following microscopes: - Jenaval - Jenalumar - Lu (I'm not sure) - Ng - Ergaval - Docuval - Polmi A The companies IOR Bucuresti and Lomo made their own versions of pancratic condensers - I don't know if this lens is compatible with them. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lumipan microscope repair parts kondensor pankratyczny pankratic pancratic pankratischen pankratischer pankratic condenser Vorsatzlinse Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Lenses	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lumipan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf NfPk NU NU-2 Polmi A Amplival Jenalab Jenaval	A list of potential uses for this part and when it might be needed. if the lens is missing from the condenser if the lens is damaged or in very poor condition if you want to mount it to a completely different DIY condenser	0000-00-00 00:00:00
97 - Thumbnail photo showing this microscope part. Carl Zeiss Jena B229 fluorescence microscope filter, diameter 20 mm, blue - thumbnail [ 00550 ]	SERMIK_ID number under which this microscope part is placed in the database. 00550	Carl Zeiss Jena B229 20 mm microscope fluorescence blue filter	The name of this microscope part. Carl Zeiss Jena B229 fluorescence microscope filter, diameter 20 mm, blue	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: B229 Type: Barrier Fluorescence Filter Diameter: 20 mm Color: blue This 20 mm diameter filter is exceptionally ... rare on the used microscope market. It can be used with microscopes such as: - Carl Zeiss Jena Jenamed Fluorescence (Fluoreszenz) - Carl Zeiss Jena Jenalumar - Carl Zeiss Jena Fluoval - Carl Zeiss Jena Laboval Fluorescence Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenalumar microscope repair parts Carl Zeiss Jena microscope fluorescence filter Carl Zeiss Jena Mikroskop Fluoreszenzfilter HBO Mikroskop Fluoreszenz Carl Zeiss Jena luminescence microscope filter Carl Zeiss Jena Fluoreszenz Mikroskop Filterwürfel Zeiss Jena microscope filter cube Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 129 €	Name of the category to which this microscope part is classified. Filters	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenalumar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Jenalumar Laboval Fluorescence Fluoval-2 Fluoval	A list of potential uses for this part and when it might be needed. If you know the B229 filter specification and this is exactly what you need (e.g. for a filter cube)	0000-00-00 00:00:00
98 - Thumbnail photo showing this microscope part. Carl Zeiss Jena G247 and G245 fluorescence microscope filter, diameter 20 mm, yellow - thumbnail [ 00551 ]	SERMIK_ID number under which this microscope part is placed in the database. 00551	Carl Zeiss Jena G247 + G245 20 mm microscope fluorescence yellow filter	The name of this microscope part. Carl Zeiss Jena G247 and G245 fluorescence microscope filter, diameter 20 mm, yellow	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: double sided, G247 + G245 Type: Barrier Fluorescence Filter Diameter: 20 mm Color: yellow This 20 mm diameter ... filter is exceptionally rare on the used microscope market. It can be used with microscopes such as: - Carl Zeiss Jena Jenamed Fluorescence (Fluoreszenz) - Carl Zeiss Jena Jenalumar - Carl Zeiss Jena Fluoval - Carl Zeiss Jena Laboval Fluorescence Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenalumar microscope repair parts Carl Zeiss Jena microscope fluorescence filter Carl Zeiss Jena Mikroskop Fluoreszenzfilter HBO Mikroskop Fluoreszenz Carl Zeiss Jena luminescence microscope filter Carl Zeiss Jena Fluoreszenz Mikroskop Filterwürfel Zeiss Jena microscope filter cube Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 129 €	Name of the category to which this microscope part is classified. Filters	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenalumar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Jenalumar Laboval Fluorescence Fluoval-2 Fluoval	A list of potential uses for this part and when it might be needed. If you know the G247/G245 filter specification and this is exactly what you need (e.g. for a filter cube)	0000-00-00 00:00:00
105 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Gear tube from the focusing mechanism (macro / micro) of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus - thumbnail [ 00370 ]	SERMIK_ID number under which this microscope part is placed in the database. 00370	Carl Zeiss Jena Ergaval / Amplival microscope pinion tube from focusing macro / micro mechanism / coarse focus	The name of this microscope part. Gear tube from the focusing mechanism (macro / micro) of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus	Description of this part for the microscope. The gear tube (rack / pinion) is a service element for the coarse and fine (macro and micro) vertical focusing mechanism. As far I know, the same mechanism ... operates in the following Carl Zeiss Jena microscopes: - Ergaval - Amplival - Fluoval - Vertival - Epival - Docuval - Metaval Coarse focus element. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Ergaval microscope repair parts Makro mikro macro micro focusing vertical movement Feintrieb Grobtrieb Zahnrad Zahnstange Zahnrohr rack pinion listwa zębata koło zębate zębatka pokręto sterowanie podnoszenie Coarse focus element. Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ergaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Ergaval Amplival Vertival Epival Metaval Docuval Fluoval	A list of potential uses for this part and when it might be needed. as a service part	0000-00-00 00:00:00
106 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Rack from the vertical focusing mechanism of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus - thumbnail [ 00371 ]	SERMIK_ID number under which this microscope part is placed in the database. 00371	Carl Zeiss Jena Ergaval / Amplival microscope rack from vertical focusing mechanism / coarse focus	The name of this microscope part. Rack from the vertical focusing mechanism of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus	Description of this part for the microscope. The rack is a service element for the vertical focusing movement mechanism. As far I know, the same mechanism operates in the following Carl Zeiss Jena ... microscopes: - Ergaval - Amplival - Fluoval - Vertival - Epival - Docuval - Metaval Coarse focus element. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Ergaval microscope repair parts Makro mikro macro micro focusing vertical movement Feintrieb Grobtrieb Zahnrad Zahnstange Zahnrohr rack pinion listwa zębata koło zębate zębatka pokręto sterowanie podnoszenie Coarse focus element. Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ergaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Ergaval Amplival Vertival Epival Metaval Docuval Fluoval	A list of potential uses for this part and when it might be needed. as a service part	0000-00-00 00:00:00
107 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Pinion system from the vertical focusing mechanism of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus - thumbnail [ 00372 ]	SERMIK_ID number under which this microscope part is placed in the database. 00372	Carl Zeiss Jena Ergaval / Amplival microscope pinion (system) from vertical focusing mechanism / coarse focus	The name of this microscope part. Pinion system from the vertical focusing mechanism of the Carl Zeiss Jena Ergaval / Amplival microscope / coarse focus	Description of this part for the microscope. The pionion system is a service element for the vertical focusing movement mechanism. As far I know, the same mechanism operates in the following Carl Zeiss Jena ... microscopes: - Ergaval - Amplival - Fluoval - Vertival - Epival - Docuval - Metaval Coarse focus element. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Ergaval microscope repair parts Makro mikro macro micro focusing vertical movement Feintrieb Grobtrieb Zahnrad Zahnstange Zahnrohr rack pinion listwa zębata koło zębate zębatka pokręto sterowanie podnoszenie Coarse focus element. Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ergaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Ergaval Amplival Vertival Epival Metaval Docuval Fluoval	A list of potential uses for this part and when it might be needed. as a service part	0000-00-00 00:00:00
111 - Thumbnail photo showing this microscope part. Zeiss Interpupillary distance adjustment mechanism for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00577 ]	SERMIK_ID number under which this microscope part is placed in the database. 00577	Zeiss microscope interpupillary distance adjustment mechanism for Zeiss 473012-9902 binocular head	The name of this microscope part. Interpupillary distance adjustment mechanism for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Mechanism for adjusting the interpupillary distance (distance between the eyes) for the Zeiss binocular microscope head. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this item becomes damaged / bent / broken / cracked	0000-00-00 00:00:00
112 - Thumbnail photo showing this microscope part. Zeiss Central part of the housing (1) for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00576 ]	SERMIK_ID number under which this microscope part is placed in the database. 00576	Zeiss microscope 473012-9902 binocular head - middle (central) part of the housing (1)	The name of this microscope part. Central part of the housing (1) for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this item becomes damaged / bent / broken / cracked	0000-00-00 00:00:00
113 - Thumbnail photo showing this microscope part. Zeiss Part of the housing (2) for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00575 ]	SERMIK_ID number under which this microscope part is placed in the database. 00575	Zeiss microscope 473012-9902 binocular head - part of the housing (2)	The name of this microscope part. Part of the housing (2) for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this item becomes damaged / bent / broken / cracked	0000-00-00 00:00:00
114 - Thumbnail photo showing this microscope part. Zeiss Part of the housing (3) for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00574 ]	SERMIK_ID number under which this microscope part is placed in the database. 00574	Zeiss microscope 473012-9902 binocular head - part of the housing (3)	The name of this microscope part. Part of the housing (3) for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this item becomes damaged / bent / broken / cracked	0000-00-00 00:00:00
115 - Thumbnail photo showing this microscope part. Zeiss Side part of the housing, eyepiece prism cover (4) for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00573 ]	SERMIK_ID number under which this microscope part is placed in the database. 00573	Zeiss microscope 473012-9902 binocular head - side part of the housing, eyepiece prism cover (4)	The name of this microscope part. Side part of the housing, eyepiece prism cover (4) for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie cover Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this item becomes damaged / bent / broken / cracked	0000-00-00 00:00:00
116 - Thumbnail photo showing this microscope part. Zeiss Eyepiece prism for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00572 ]	SERMIK_ID number under which this microscope part is placed in the database. 00572	Zeiss microscope 473012-9902 binocular head - eyepiece prism	The name of this microscope part. Eyepiece prism for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie pryzmat lustro prism mirror beamsplitter prismen Spiegel Prisma delamination Pilz Fungus Mold grzyb Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Prisms	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this element is damaged, cracked, delaminating, damaged by fungus (mold)	0000-00-00 00:00:00
117 - Thumbnail photo showing this microscope part. Zeiss Inner lens for Zeiss 473012-9902 binocular microscope head - thumbnail [ 00571 ]	SERMIK_ID number under which this microscope part is placed in the database. 00571	Zeiss microscope 473012-9902 binocular head - internal lens	The name of this microscope part. Inner lens for Zeiss 473012-9902 binocular microscope head	Description of this part for the microscope. Service / repair part. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Zeiss microscope binocular head P/N 473012-9902 microscope repair parts Carl Zeiss West Germany Opton głowica bino binokular binokularowa stereo binocular Kopf Head microscope mikroskop naprawa serwis service repair Reparatur Reinigen Neufetten regrease wymiana smarów czyszczenie pryzmat lustro prism mirror beamsplitter prismen Spiegel Prisma delamination Pilz Fungus Mold grzyb Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Zeiss microscope binocular head P/N 473012-9902 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Zeiss microscope binocular head P/N 473012-9902	A list of potential uses for this part and when it might be needed. service part / repair part / replacement part needed if this element is damaged, cracked, delaminating, damaged by fungus (mold)	0000-00-00 00:00:00
118 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Stage holder (support) for Carl Zeiss Jena Epityp-2 microscope - thumbnail [ 00581 ]	SERMIK_ID number under which this microscope part is placed in the database. 00581	Carl Zeiss Jena EPITYP-2 microscope stage support holder	The name of this microscope part. Stage holder (support) for Carl Zeiss Jena Epityp-2 microscope	Description of this part for the microscope. The upper part of the microscope. The stage mount is screwed onto the microscope stand. The stage is mounted in this mount. The mount has two centering screws. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Epityp-2 microscope repair parts Epityp metalurgical metalograficzny EPI metalurgical odwrócony inverted inverses uchwyt stolika trzymak support mount holder Halter. Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Stage holders (supports)	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Epityp-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Epityp-2	A list of potential uses for this part and when it might be needed. service part if this part is missing or damaged.	0000-00-00 00:00:00
123 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 6V 1.8W illuminator for Carl Zeiss Jena BK 70x50 toolmakers / measuring microscope - thumbnail [ 00591 ]	SERMIK_ID number under which this microscope part is placed in the database. 00591	Carl Zeiss Jena Measuring Toolmakers microscope illumination BK 70x50 Mikroskop Beleuchter Beleuchtung Werkzeugmikroskop Messmikroskop	The name of this microscope part. 6V 1.8W illuminator for Carl Zeiss Jena BK 70x50 toolmakers / measuring microscope	Description of this part for the microscope. A small lamp mounted on the microscope body ? below the head but above the objective. 6V 1.8W Perhaps it can also be used with the BK 70x50 model. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts measuring microscope toolmakers mess werkzeug Messmikroskop Werkzeugmikroskop mikroskop warsztatowy pomiarowy duży oświetlacz illuminator Beleuchtung Beleuchter Lamp bulb Lampe Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Illuminators	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM	A list of potential uses for this part and when it might be needed. in used microscopes this small element is very often missing	0000-00-00 00:00:00
124 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 4 mm microscope tool (key) - thumbnail [ 00590 ]	SERMIK_ID number under which this microscope part is placed in the database. 00590	Carl Zeiss Jena 4 mm microscope square tool / key	The name of this microscope part. Carl Zeiss Jena 4 mm microscope tool (key)	Description of this part for the microscope. A key with a 4 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g., DIC or polarizing - ... iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
125 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 1.5 mm microscope tool (key) - thumbnail [ 00589 ]	SERMIK_ID number under which this microscope part is placed in the database. 00589	Carl Zeiss Jena 1.5 mm microscope square tool / key	The name of this microscope part. Carl Zeiss Jena 1.5 mm microscope tool (key)	Description of this part for the microscope. A key with a 1.5 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g., DIC or ... polarizing - iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
127 - Thumbnail photo showing this microscope part. Zeiss Mirror prism with dovetail and lower bottom lens - thumbnail [ 00583 ]	SERMIK_ID number under which this microscope part is placed in the database. 00583	Microscope binocular head mirror prism with dovetail and lower bottom lens	The name of this microscope part. Mirror prism with dovetail and lower bottom lens	Description of this part for the microscope. This is the lower part of a gray Carl Zeiss West Germany binocular head for Standard 14 microscope. - Right angle prism/mirror prism/mirror - ... Dovetail/mounting connector for the microscope body - Dovetail connector diameter: 43 mm - Lower bottom lens Here is the same part, but with screws. Sorry, I don't know the part number. It's a binocular head mounted on Carl Zeiss Standard 14 and Standard 16 microscopes. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard 14 microscope repair parts Pryzmat lustro soczewka złączka jaskółczy ogon soczewka Umlenk Spiegel Prisma Linse Lens mirror prism Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Prisms	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard 14 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard 14 Standard GFL Zeiss Standard microscope binocular head Standard WL Standard 16	A list of potential uses for this part and when it might be needed. if your head is delaminating, chipped, cracked, scratched, or discolored on the prism if the mirror surface is oxidized if the lower bottom lens is cracked if fungus (mold) has destroyed the anti-reflective surface if your dovetail is damaged	0000-00-00 00:00:00
128 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope reflected light dark field EPI-illumination condenser "10" slide with apochromat 32x microscope objective for reflected light condenser or microscopes. - thumbnail [ 00585 ]	SERMIK_ID number under which this microscope part is placed in the database. 00585	Carl Zeiss Jena Vertival EPI microscope objective dark field EPI-illumination condenser, Carl Zeiss Jena Apochromat 32x microscope objective, M19 thread slide (Auflicht Hohlspiegel-Kondensor 10)	The name of this microscope part. Carl Zeiss Jena microscope reflected light dark field EPI-illumination condenser "10" slide with apochromat 32x microscope objective for reflected light condenser or ... microscopes.	Description of this part for the microscope. A set of items rarely found on the used market: - EPI dark field illumination condenser (mirror objective slide/insert) no. "10" with M19 thread (German: ... Hohlspiegelkondensor 10) - Carl Zeiss Jena Apochromat 32x microscope objective Model: Hohlspiegelkondensor 10 Color: Black Internal thread: M19 Objective: --------- Manufacturer: Carl Zeiss Jena Model: Apochromat 32x 0.65 oo Tube length: infinity Magnification: 32x Numerical aperture: 0.65 Cover glass: no Type: EPI (reflected light) Thread: M19 This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives). Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Vertival microscope repair parts Auflicht EPI reflected light światło odbite Hohlspiegelkondensor Hohlspiegel Kondensor obiektyw objective Objektiv Carl Zeiss Jena Nf NU NU-2 Epignost Vertival Epival BK 70x50 dark field EPI-illumination condenser Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vertival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Nf NU NU-2 Vertival Epival Epignost BK 70x50	A list of potential uses for this part and when it might be needed. if your set is missing a part with this number if your set is missing this lens if your mirror insert is damaged (the thread is damaged, the glass is broken, or the mirror is oxidized)	0000-00-00 00:00:00
129 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Vertival EPI microscope condenser and Planachromat 4x objective - thumbnail [ 00586 ]	SERMIK_ID number under which this microscope part is placed in the database. 00586	Carl Zeiss Jena Vertival EPI microscope condenser and Planachromat 4x objective	The name of this microscope part. Carl Zeiss Jena Vertival EPI microscope condenser and Planachromat 4x objective	Description of this part for the microscope. A set of items rarely found on the used market: - EPI dark field illumination condenser (mirror objective slide/insert) No. "10" with M19 thread (German: ... Hohlspiegelkondensor 9) - Carl Zeiss Jena Planachromat 4x microscope objective Model: Hohlspiegelkondensor 9 Color: Black Internal thread: M19 Objective: --------- Manufacturer: Carl Zeiss Jena Model: Planachromat K 4x/0,05 oo/0 oo/2 Tube length: infinity Magnification: 4x Numerical aperture: 0.05 Cover glass: no OR 2 mm Type: EPI (reflected light) Thread: M19 Info: this microscope objective can work in oo/0 mode or after unscrewing the upper lens in oo/2 mode (e.g. for a Petri dish or through a microscope slide) Mirror objective slides / inserts are used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives). Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Vertival microscope repair parts Auflicht EPI reflected light światło odbite Hohlspiegelkondensor Hohlspiegel Kondensor obiektyw objective Objektiv Carl Zeiss Jena Nf NU NU-2 Epignost Vertival Epival BK 70x50 dark field EPI-illumination condenser Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vertival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Nf NU NU-2 Vertival Epival Epignost BK 70x50	A list of potential uses for this part and when it might be needed. if your set is missing a part with this number if your set is missing this lens if your mirror insert is damaged (the thread is damaged, the glass is broken, or the mirror is oxidized) if you need an objective lens for an inverted microscope (observations through a Petri dish or glass slide)	0000-00-00 00:00:00
130 - Thumbnail photo showing this microscope part. Zeiss Carl Zeiss Standard 14 microscope stand base (empty) - thumbnail [ 00584 ]	SERMIK_ID number under which this microscope part is placed in the database. 00584	Carl Zeiss Standard 14 microscope base (empty)	The name of this microscope part. Carl Zeiss Standard 14 microscope stand base (empty)	Description of this part for the microscope. The base is in very good condition, with some old glue remaining in one spot, but this can be cleaned. The base is empty - it does not contain any lighting or electrical ... components. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard 14 microscope repair parts Base Stativ podstawa Mikroskopstativ Mikroskop microscope Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Bases (foots)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard 14 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard 14 Standard 16	A list of potential uses for this part and when it might be needed. if you have a microscope with a base in very poor condition if you want to mount this base to a different model	0000-00-00 00:00:00
131 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope tool / key - thumbnail [ 00588 ]	SERMIK_ID number under which this microscope part is placed in the database. 00588	Carl Zeiss Jena microscope tool / key / accesory	The name of this microscope part. Carl Zeiss Jena microscope tool / key	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 6	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
132 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat HD 5x/0.10 oo/-A microscope objective for EPI reflected light, M30 thread, brightfield and darkfield - thumbnail [ 00545 ]	SERMIK_ID number under which this microscope part is placed in the database. 00545	Carl Zeiss Jena Planachromat HD 5x/0,10 oo/ -A EPI (Auflicht) brightfield and darkfield microscope objective M30	The name of this microscope part. Carl Zeiss Jena Planachromat HD 5x/0.10 oo/-A microscope objective for EPI reflected light, M30 thread, brightfield and darkfield	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Planachromat HD 5x/0.10 oo/-A Magnification: 5x Thread: M30 Tube length: infinity Type: EPI HD = for reflected light ... in bright or dark fields The objective lens is in excellent optical condition. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenatech microscope repair parts EPI Auflicht reflected light światło odbite Jenatech M30 obiektyw objective Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenatech Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenatech Jenaphot 2000 Jenatech Inspection	A list of potential uses for this part and when it might be needed. if you don't have such a lens if you have such a lens, but it's in very poor condition or damaged if you're building a DIY macro photo stacking kit	0000-00-00 00:00:00
133 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat HD 20x/0.40 oo/0-A microscope objective for EPI reflected light, M30 thread, brightfield and darkfield - thumbnail [ 00547 ]	SERMIK_ID number under which this microscope part is placed in the database. 00547	Carl Zeiss Jena Planachromat HD 20x/0,40 oo/0-A EPI (Auflicht) brightfield and darkfield microscope objective M30	The name of this microscope part. Carl Zeiss Jena Planachromat HD 20x/0.40 oo/0-A microscope objective for EPI reflected light, M30 thread, brightfield and darkfield	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Planachromat HD 20x/0.40 oo/0-A Magnification: 20x Thread: M30 Tube length: infinity Type: EPI HD = for reflected ... light in bright or dark fields The objective lens is in excellent optical condition. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenatech microscope repair parts EPI Auflicht reflected light światło odbite Jenatech M30 obiektyw objective Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 119 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenatech Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenatech Jenaphot 2000 Jenatech Inspection	A list of potential uses for this part and when it might be needed. if you don't have such a lens if you have such a lens, but it's in very poor condition or damaged if you're building a DIY macro photo stacking kit	0000-00-00 00:00:00
135 - Thumbnail photo showing this microscope part. SWIFT (Japan) Swift Phase Master II microscope phase contrast condenser - thumbnail [ 00558 ]	SERMIK_ID number under which this microscope part is placed in the database. 00558	Swift (Japan) Phase Master II microscope phase contrast condenser	The name of this microscope part. Swift Phase Master II microscope phase contrast condenser	Description of this part for the microscope. Manufacturer: Swift (Japan) Type: Phase Contrast Condenser Model: Phase Master II Mounting Diameter: 39.5 mm Numerical Aperture: 1.1 Supports Objectives: ... 10x, 40x, and 100x This phase contrast condenser can be used with microscopes from virtually any manufacturer as long as they have a 39.5 mm condenser mounting diameter (PZO, Zeiss, Will Wetzlar, and dozens of others). This high-quality phase contrast condenser was manufactured in Japan before the company was acquired by the Chinese company Motic. Names, descriptions, terms, and search contexts under which this part is searched. SWIFT (Japan) M4000-D microscope repair parts mikroskop microscope phase contrast condenser kontrast fazowy phasenkontrast zernike SWIFT (Japan) buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 129 €	Name of the category to which this microscope part is classified. Condensers	Abbreviated and full name of the manufacturer of this microscope part. SWIFT (Japan) Swift Optical Instruments (Japan)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. M4000-D Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (SWIFT (Japan)) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Collegiate 400 M4000-D Eduval-4 Laboval-4 Biolar V300 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. If you have a Swift Japan microscope with phase contrast objectives but are missing a condenser If you want to experiment with whether this condenser will fit your existing phase contrast objectives from another manufacturer	0000-00-00 00:00:00
136 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00587 ]	SERMIK_ID number under which this microscope part is placed in the database. 00587	Carl Zeiss Jena PK 8x (18) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. These eyepieces are in excellent optical condition and show no signs of wear. Manufacturer: Carl Zeiss Jena Magnification: 8x Field of view: 18 Mounting ... diameter: 23.2 mm Due to their very high quality, they are often used with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted. 8x eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 8x eyepieces provide the best image and optimal magnification. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts okulary plankompensacyjne plan compensation eyepieces Okulare microscope Mikroskop Planachromat objectives obiektywy plan planachromatyczne objektiv bino trino binokular głowica dwuoczna binocular head Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have a head with its own 1.5x or 1.6x magnification and need the appropriate eyepieces, 8x are the right ones if you have 8x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	0000-00-00 00:00:00
137 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Auxiliary microscope "P" Carl Zeiss Jena for adjusting the phase rings, dark field diaphragm and DIC in the condenser (23.2 mm microscope eyepiece, telescope) - thumbnail [ 00565 ]	SERMIK_ID number under which this microscope part is placed in the database. 00565	Carl Zeiss Jena Phase Contrast Auxiliary microscope, telescope, P eyepiece, phasenkontrast Justierung Hilfsmikroskop	The name of this microscope part. Auxiliary microscope "P" Carl Zeiss Jena for adjusting the phase rings, dark field diaphragm and DIC in the condenser (23.2 mm microscope eyepiece, te ... lescope)	Description of this part for the microscope. This device replaces one of the eyepieces on the microscope head and is used to center the phase contrast, dark field, or DIC discs in the slides or condenser. ... Common names include: - auxiliary microscope - telescope - phase eyepiece It is also often used to test the quality of microscope objectives, look for contamination, delamination, diaphragm condition, or adjust the Koehler illumination (observing the filament in a light bulb). It can be used with any microscope manufacturer as long as it uses eyepieces with a mounting diameter of 23.2 mm. Manufacturer: Carl Zeiss Jena Model: P Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts auxiliary microscope telescope phase eyepiece Hilfsmikroskop Teleskop Phasenokular mikroskop pomocniczy okular fazowy phase contrast kontrast fazowy phasenkontrast dic dik ciemne pole darkfield dunkelfeld objektiv objective obiektyw okular eyepiece Koehler light illumination beleuchtung Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Praktycznie każdy z TL = finite Praktycznie każdy z TL = 160 mm Praktycznie każdy z TL = 170 mm model and	A list of potential uses for this part and when it might be needed. for setting phase contrast, DIC, and dark field for testing lenses for dirt or damage for setting Koehler standard illumination	0000-00-00 00:00:00
138 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ph HI 90 1.25 phase contrast microscope objective with 90x magnification - thumbnail [ 00548 ]	SERMIK_ID number under which this microscope part is placed in the database. 00548	Carl Zeiss Jena Ph HI 90 1,25 Phase Contrast microscope objective (Phasenkontrast 90x)	The name of this microscope part. Carl Zeiss Jena Ph HI 90 1.25 phase contrast microscope objective with 90x magnification	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Ph HI 90 1.25 Magnification: 90x Correction: Achromat Numerical Aperture: 1.25 Tube Length: 160 mm Focal Length: ... 33 mm Cover Glass: 0.17 mm Immersion: Yes, oil immersion Thread: RMS Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast. This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective lens of this quality on the used parts market. It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Mikroskop Objektiv obiektyw mikroskopowy lens glass soczewka microscope objective kontrast fazowy Phase Contrast Phasen Kontrast Phasenkontrast Ph Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NfPk Ng	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	0000-00-00 00:00:00
142 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 1 (BK 70x50) - thumbnail [ 00600 ]	SERMIK_ID number under which this microscope part is placed in the database. 00600	Carl Zeiss Jena Measuring Toolmakers microscope Element 1 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 1 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
143 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 2 (BK 70x50) - thumbnail [ 00599 ]	SERMIK_ID number under which this microscope part is placed in the database. 00599	Carl Zeiss Jena Measuring Toolmakers microscope Element 2 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 2 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
144 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 3 (BK 70x50) - thumbnail [ 00598 ]	SERMIK_ID number under which this microscope part is placed in the database. 00598	Carl Zeiss Jena Measuring Toolmakres microscope Element 3 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 3 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
148 - Thumbnail photo showing this microscope part. IOR Intermediate tube (angled tube) for the IOR Bucuresti microscope head with a 41 mm mounting connector (Carl Zeiss Jena / Lomo standard) dovetail. - thumbnail [ 00595 ]	SERMIK_ID number under which this microscope part is placed in the database. 00595	IOR Bucuresti microscope intermediate angle tube (Zwischentubus, Winkeltubus) /Carl Zeiss Jena 41 mm type/	The name of this microscope part. Intermediate tube (angled tube) for the IOR Bucuresti microscope head with a 41 mm mounting connector (Carl Zeiss Jena / Lomo standard) dovetail.	Description of this part for the microscope. It's not easy to find good technical descriptions of IOR microscopes. The following may contain errors. Type: Angle tube / Intermediate tube / Mirror ... tube Stand mount: 41 mm dovetail Head mount: 41 mm dovetail Inherent magnification: none (1.0x) Interestingly, the head has a slot for slide inserts (e.g., color, fluorescence, or polarizing filters). Because IOR produced microscopes modeled after the Carl Zeiss Jena and Lomo, many (most) IOR parts are compatible with microscopes from these manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. IOR MC-6 microscope repair parts IOR Bucuresti Lomo Carl Zeiss Jena Meopta Winkeltubus Zwischentubus Spiegeltubus Angle tube Intermediate tube Mirror tube tubus kątowy tubus pośredni tubus lustrzany głowica 41 mm IOR buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Intermediate tube	Abbreviated and full name of the manufacturer of this microscope part. IOR Intreprinderea Optică Română (IOR)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MC-6 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (IOR) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MC-7 MC-6 Amplival Ergaval model Metam Biolam	A list of potential uses for this part and when it might be needed. if your microscope is missing this part if you have this part but the mirror or lens is damaged if you want to use this part in a microscope from another manufacturer	0000-00-00 00:00:00
149 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 1.5 mm microscope short tool (key) - thumbnail [ 00610 ]	SERMIK_ID number under which this microscope part is placed in the database. 00610	Carl Zeiss Jena 1.5 mm microscope square short tool / key	The name of this microscope part. Carl Zeiss Jena 1.5 mm microscope short tool (key)	Description of this part for the microscope. A short key with a 1.5 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g. ... , DIC or polarizing - iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 6	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
150 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope tool / key (long pin) - thumbnail [ 00609 ]	SERMIK_ID number under which this microscope part is placed in the database. 00609	Carl Zeiss Jena microscope tool / key / accesory (long pin)	The name of this microscope part. Carl Zeiss Jena microscope tool / key (long pin)	Description of this part for the microscope. Microscope wrench with long pin. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
153 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Original Carl Zeiss Jena Jenamed cytology nameplate made of aluminum - thumbnail [ 00606 ]	SERMIK_ID number under which this microscope part is placed in the database. 00606	Original Carl Zeiss Jena Jenamed Cytology microscope aluminum nameplate label (to be glued to the microscope)	The name of this microscope part. Original Carl Zeiss Jena Jenamed cytology nameplate made of aluminum	Description of this part for the microscope. The dimensions are shown in the photo. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenamed microscope repair parts etykietka logo plakietka tabliczka nalepka naklejka microscope mikroskop Carl Zeiss Jena Jenamed cytology Namensschild Etikette Aufkleber aluminiom metal sticker nameplate plate Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Stickers (nameplates)	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenamed Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed	A list of potential uses for this part and when it might be needed. on used microscopes this plate is very often missing	0000-00-00 00:00:00
154 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Original Carl Zeiss Jena Jenamed-2 nameplate made of aluminum (for sticking onto the microscope). - thumbnail [ 00605 ]	SERMIK_ID number under which this microscope part is placed in the database. 00605	Original Carl Zeiss Jena Jenamed-2 microscope aluminum nameplate label (to be glued to the microscope).	The name of this microscope part. Original Carl Zeiss Jena Jenamed-2 nameplate made of aluminum (for sticking onto the microscope).	Description of this part for the microscope. The dimensions are shown in the photo. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Jenamed microscope repair parts etykietka logo plakietka tabliczka nalepka naklejka microscope mikroskop Carl Zeiss Jena Jenamed 2 Jenamed2 Jenamed-2 Namensschild Etikette Aufkleber aluminiom metal sticker nameplate plate Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Stickers (nameplates)	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Jenamed Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed	A list of potential uses for this part and when it might be needed. on used microscopes this plate is very often missing	0000-00-00 00:00:00
155 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Original Carl Zeiss Jena nameplate made of aluminum (for sticking onto the microscope). - thumbnail [ 00604 ]	SERMIK_ID number under which this microscope part is placed in the database. 00604	Original Carl Zeiss Jena microscope aluminum nameplate label (to be glued to the microscope).	The name of this microscope part. Original Carl Zeiss Jena nameplate made of aluminum (for sticking onto the microscope).	Description of this part for the microscope. The dimensions are shown in the photo. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts etykietka logo plakietka tabliczka nalepka naklejka microscope mikroskop Carl Zeiss Jena Eduval Laboval Ergaval Amplival Docuval Jenamed Jenaval Jenalumar Namensschild Etikette Aufkleber aluminiom metal sticker nameplate plate Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Stickers (nameplates)	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Eduval Laboval Jenaval Amplival Ergaval	A list of potential uses for this part and when it might be needed. on used microscopes this plate is very often missing	0000-00-00 00:00:00
156 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 1PP-1 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00603 ]	SERMIK_ID number under which this microscope part is placed in the database. 00603	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 1PP-1	The name of this microscope part. Lomo microscope tool / key 1PP-1 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
157 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 2PP-2 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00602 ]	SERMIK_ID number under which this microscope part is placed in the database. 00602	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 2PP-2	The name of this microscope part. Lomo microscope tool / key 2PP-2 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
158 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 3PP-3 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00601 ]	SERMIK_ID number under which this microscope part is placed in the database. 00601	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 3PP-3	The name of this microscope part. Lomo microscope tool / key 3PP-3 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 5	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
159 - Thumbnail photo showing this microscope part. PZO Eyepiece barrier fluorescence filter GG9 for PZO Biolar FL and PZO MB-30 FL microscopes. - thumbnail [ 00614 ]	SERMIK_ID number under which this microscope part is placed in the database. 00614	PZO GG9 microscope fluorescence filter (PZO Biolar FL / PZO MB30 PL Fluoreszenz Mikroskop)	The name of this microscope part. Eyepiece barrier fluorescence filter GG9 for PZO Biolar FL and PZO MB-30 FL microscopes.	Description of this part for the microscope. A filter that fits under the microscope head (PZO heads have a suitable mounting ring). From what I understand, the same filters are used with the Carl Zeiss Jena NU/NU2 ... and other fluorescence microscopes from this company. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar FL microscope repair parts Mikroskop microscope Fluorescencja fluorescencyjny do fluorescencji fluorescence Fluoreszenz Filter Fluoreszenzfilter GG9 PZO Biolar FL PZO MB30 FL MB-30 PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Filters	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar FL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2 Biolar FL PZO MB-30 FL	A list of potential uses for this part and when it might be needed. if you're missing this filter from your PZO fluorescence kit if you want to use it with microscopes from another manufacturer if you want to remove just the GG9 filter and use it for your own DIY purposes	0000-00-00 00:00:00
169 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Phv variable phase contrast slide insert for 63x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope - thumbnail [ 00625 ]	SERMIK_ID number under which this microscope part is placed in the database. 00625	Carl Zeiss Jena NU / NU2 microscope 63x Phase Contrast Variable Phv EPI slide ring insert	The name of this microscope part. Phv variable phase contrast slide insert for 63x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Type: Insert slide for the EPI reflected light condenser (illuminator) Microscope: Carl Zeiss Jena ... NU / NU2 For: 63x Phv objective The EPI condenser (illuminator) of the Carl Zeiss Jena NU and NU2 microscopes, while it may look similar to the one in the Nf model, is not identical, and many parts can be interchanged between these devices. I'm not sure if this applies to this insert. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor 63x obiektyw objective objektiv ring disc slide insert wsuwka schieber einsatz Phv phase contrast variable Phasenkontrast Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
170 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Phv variable phase contrast slide insert for 25x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope - thumbnail [ 00624 ]	SERMIK_ID number under which this microscope part is placed in the database. 00624	Carl Zeiss Jena NU / NU2 microscope 25x Phase Contrast Variable Phv EPI slide ring insert	The name of this microscope part. Phv variable phase contrast slide insert for 25x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Type: Insert slide for the EPI reflected light condenser (illuminator) Microscope: Carl Zeiss Jena ... NU / NU2 For: 25x Phv objective The EPI condenser (illuminator) of the Carl Zeiss Jena NU and NU2 microscopes, while it may look similar to the one in the Nf model, is not identical, and many parts can be interchanged between these devices. I'm not sure if this applies to this insert. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor 25x obiektyw objective objektiv ring disc slide insert wsuwka schieber einsatz Phv phase contrast variable Phasenkontrast Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
171 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Phv variable phase contrast slide insert for 10x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope - thumbnail [ 00623 ]	SERMIK_ID number under which this microscope part is placed in the database. 00623	Carl Zeiss Jena NU / NU2 microscope 10x Phase Contrast Variable Phv EPI slide ring insert	The name of this microscope part. Phv variable phase contrast slide insert for 10x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Type: Insert slide for the EPI reflected light condenser (illuminator) Microscope: Carl Zeiss Jena ... NU / NU2 For: 10x Phv objective The EPI condenser (illuminator) of the Carl Zeiss Jena NU and NU2 microscopes, while it may look similar to the one in the Nf model, is not identical, and many parts can be interchanged between these devices. I'm not sure if this applies to this insert. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor 10x obiektyw objective objektiv ring disc slide insert wsuwka schieber einsatz Phv phase contrast variable Phasenkontrast Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
172 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Phv variable phase contrast slide insert for 4x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope - thumbnail [ 00622 ]	SERMIK_ID number under which this microscope part is placed in the database. 00622	Carl Zeiss Jena NU / NU2 microscope 4x Phase Contrast Variable Phv EPI slide ring insert	The name of this microscope part. Phv variable phase contrast slide insert for 4x objective for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Type: Insert slide for the EPI reflected light condenser (illuminator) Microscope: Carl Zeiss Jena ... NU / NU2 For: 4x Phv objective The EPI condenser (illuminator) of the Carl Zeiss Jena NU and NU2 microscopes, while it may look similar to the one in the Nf model, is not identical, and many parts can be interchanged between these devices. I'm not sure if this applies to this insert. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor 4x obiektyw objective objektiv ring disc slide insert wsuwka schieber einsatz Phv phase contrast variable Phasenkontrast Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
173 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Empty "0" slide insert for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope - thumbnail [ 00621 ]	SERMIK_ID number under which this microscope part is placed in the database. 00621	Carl Zeiss Jena NU / NU2 microscope "0" - empty EPI slide ring insert	The name of this microscope part. Empty "0" slide insert for EPI Reflected Light condenser illuminator Carl Zeiss Jena NU / NU2 microscope	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Type: Insert slide for the EPI reflected light condenser (illuminator) Microscope: Carl Zeiss Jena ... NU / NU2 For: "0" - empty The EPI condenser (illuminator) of the Carl Zeiss Jena NU and NU2 microscopes, while it may look similar to the one in the Nf model, is not identical, and many parts can be interchanged between these devices. I'm not sure if this applies to this insert. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor ring disc slide insert wsuwka schieber einsatz Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
174 - Thumbnail photo showing this microscope part. FOZ Opta RMS 8x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes - thumbnail [ 00639 ]	SERMIK_ID number under which this microscope part is placed in the database. 00639	FOZ "Lomo" 8x microscope objective (Lomo Biolam / Opta UM-301)	The name of this microscope part. RMS 8x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes	Description of this part for the microscope. RMS Microscope Objective with 8x Magnification Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union) Magnification: 8x Tube ... Length: 160 mm Focal Length: 33 mm Thread: RMS This objective was manufactured for microscopes: - Junat-1P - OPTA UShM-1 - Opta UM-301 but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO. Names, descriptions, terms, and search contexts under which this part is searched. FOZ Opta Opta UM-301 microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Opta Junat-P1 Opta Ushm-1 Opta UM-301 objective Objektiv obiektyw FOZ Opta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. FOZ Opta Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Opta UM-301 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (FOZ Opta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Junat-2P-1 UShM-1 Opta UM-301 Lu Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your Opta microscope with original parts If you need an 8x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses This is a very good lens for macro photography (photo stacking)	0000-00-00 00:00:00
175 - Thumbnail photo showing this microscope part. FOZ Opta RMS 20x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes - thumbnail [ 00638 ]	SERMIK_ID number under which this microscope part is placed in the database. 00638	FOZ "Lomo" 20x microscope objective (Lomo Biolam / Opta UM-301)	The name of this microscope part. RMS 20x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes	Description of this part for the microscope. RMS Microscope Objective with 20x Magnification Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union) Magnification: ... 20x Tube Length: 160 mm Focal Length: 33 mm Thread: RMS This objective was manufactured for microscopes: - Junat-1P - OPTA UShM-1 - Opta UM-301 but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO. Names, descriptions, terms, and search contexts under which this part is searched. FOZ Opta Opta UM-301 microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Opta Junat-P1 Opta Ushm-1 Opta UM-301 objective Objektiv obiektyw FOZ Opta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. FOZ Opta Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Opta UM-301 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (FOZ Opta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Junat-2P-1 UShM-1 Opta UM-301 Lu Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your Opta microscope with original parts If you need an 20x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses	0000-00-00 00:00:00
181 - Thumbnail photo showing this microscope part. Zeiss Internal power supply for the Zeiss Axiovert 100 inverted microscope. Also known as a transformer, "electrics," and an electrical (electronic) board. - thumbnail [ 00626 ]	SERMIK_ID number under which this microscope part is placed in the database. 00626	Zeiss Axiovert 100 inverted microscope power supply trafo electrics	The name of this microscope part. Internal power supply for the Zeiss Axiovert 100 inverted microscope. Also known as a transformer, "electrics," and an electrical (electronic) board.	Description of this part for the microscope. Together with the metal housing element on which the power supply is mounted. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Axiovert 100 microscope repair parts Axio Scope Axioscope Axiovert Microscope transformer power supply electric electronic circuit platine switch potentiometer lamp bulb housing Mikroskop Trafo Netzteil Lampe Birne Glühbirne Lampenhaus Schalter elektrik zasilacz elektryka elektronika płytka elektroniczna żarówka obudowa włącznik przełącznik potencjometr Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Power supplies (transformers)	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Axiovert 100 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Axiovert 100	A list of potential uses for this part and when it might be needed. if the power supply (electrical component) burns out due to a fault, storm, mains overvoltage, liquid spillage, short circuit, or, for example, an error in modifying the lighting.	0000-00-00 00:00:00
182 - Thumbnail photo showing this microscope part. Carl Zeiss Jena NU / NU2 microscope NG9 grey filter gray - thumbnail [ 00627 ]	SERMIK_ID number under which this microscope part is placed in the database. 00627	Carl Zeiss Jena NU / NU2 microscope NG9 grey filter gray	The name of this microscope part. Carl Zeiss Jena NU / NU2 microscope NG9 grey filter gray	Description of this part for the microscope. The dimensions of the insert slide are shown in the photos. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Carl Zeiss Jena NU NU2 Universalmikroskop EPI światło odbite reflected light Auflicht condenser Kondensor Auflichtkondensor ring disc slide insert wsuwka schieber einsatz filtr filter GG9 grau grey gray szary Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Filters	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2	A list of potential uses for this part and when it might be needed. if you're missing this item from your kit if you have this item, but it's damaged if you want a spare part	0000-00-00 00:00:00
183 - Thumbnail photo showing this microscope part. IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg) - thumbnail [ 00633 ]	SERMIK_ID number under which this microscope part is placed in the database. 00633	IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg)	The name of this microscope part. IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg)	Description of this part for the microscope. RMS microscope objective with 10x magnification. Manufacturer: IOR Bucuresti (Romania) Magnification: 10x Numerical aperture: 0.30 Tube length: 160 ... mm Focal length: 33 mm Thread: RMS This objective is an exact replica of the identical Carl Zeiss Jena objective. Names, descriptions, terms, and search contexts under which this part is searched. IOR ML-4M microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Lg IOR ML-4M objective Objektiv obiektyw IOR buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. IOR Intreprinderea Optică Română (IOR)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-4M Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (IOR) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-4M Lg Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your IOR microscope with original parts If you need an 10x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses	0000-00-00 00:00:00
184 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope quarter-wave plate, 1/4 lambda polarization filter slider C - thumbnail [ 00629 ]	SERMIK_ID number under which this microscope part is placed in the database. 00629	Carl Zeiss Jena 1/4 Lambda quarter wave plate, microscope polarisation filter Pol slide C	The name of this microscope part. Carl Zeiss Jena microscope quarter-wave plate, 1/4 lambda polarization filter slider C	Description of this part for the microscope. C-type slider with a 1/4 Lambda polarizing filter, i.e., a quarter-wave plate (quarter-wave glass). The exact dimensions are shown in the photos. It originally ... came from an EPI-POL illuminator for the Carl Zeiss Jena NU microscope, but as far as I know, the same sliders are compatible with the polarizing kit for the Carl Zeiss Jena Lg, NF, and Polmi-A polarizing microscopes. It's very possible it fits other configurations I'm not aware of, or even microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Polarization polaryzacja polarisation 1/4 Lambda quarter-wave plate ćwierćfalówka Viertelwellenplatte Carl Zeiss Jena Nu Lg Nf Polmo-A Schieber wsuwka filter slide insert Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 89 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NU NU-2 Laboval Pol Polmi A	A list of potential uses for this part and when it might be needed. If you're missing this slidefrom your existing set If you have this slide, but it's damaged (e.g., delamination) If you want to use this quarter-wave plate for other DIY purposes	0000-00-00 00:00:00
185 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope Quartz RI Red polarization filter slider G - thumbnail [ 00628 ]	SERMIK_ID number under which this microscope part is placed in the database. 00628	Carl Zeiss Jena RI Quartz plate, microscope polarisation filter Pol slide G Red	The name of this microscope part. Carl Zeiss Jena microscope Quartz RI Red polarization filter slider G	Description of this part for the microscope. G-type slider with a Quartz RI (red) filter glass. The exact dimensions are shown in the photos. It originally came from an EPI-POL illuminator for the Carl Zeiss ... Jena NU microscope, but as far as I know, the same sliders are compatible with the polarizing kit for the Carl Zeiss Jena Lg, NF, and Polmi-A polarizing microscopes. It's very possible it fits other configurations I'm not aware of, or even microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Mikroskop microscope Polarization polaryzacja polarisation quartz RI rot red kwarc Carl Zeiss Jena Nu Lg Nf Polmo-A Schieber wsuwka filter slide insert Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Sliders	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NU NU-2 Laboval Pol Polmi A	A list of potential uses for this part and when it might be needed. If you're missing this slidefrom your existing set If you have this slide, but it's damaged (e.g., delamination) If you want to use this quartz RI plate for other DIY purposes	0000-00-00 00:00:00
186 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 1 1/4 microscope objective for vintage stereo microscope (Stereomikroskop Objektiv 2x) - thumbnail [ 00654 ]	SERMIK_ID number under which this microscope part is placed in the database. 00654	Carl Zeiss Jena 1 1/4 Stereo Microscope Objective (Stereomikroskop Objektiv 2x)	The name of this microscope part. Carl Zeiss Jena 1 1/4 microscope objective for vintage stereo microscope (Stereomikroskop Objektiv 2x)	Description of this part for the microscope. The objective lens is in excellent condition, with no signs of use. It's difficult to find an objective lens of this quality on the used parts market. - ... Stereo objective microscope - 2x magnification - For the vintage stereo microscopes Since the 1930s, Carl Zeiss Jena has produced many models and variants of stereo microscopes and this lens will fit the vast majority of them. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Stereomikroskop Stativ XII microscope repair parts Mikroskop stereo stereoskopowy stereo microscope obiektyw Objektiv objective do mikroskopu stereoskopowego macro makro photo foto stacking Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Stereomikroskop Stativ XII Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Stereomikroskop Stativ XII	A list of potential uses for this part and when it might be needed. if you have a vintage microscope without lenses and want to replace it with original parts if you need a lens to replace a damaged lens, or if your current lens is in very poor condition if you have a microscope with lenses of other magnifications and want to have all of them	0000-00-00 00:00:00
189 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 4 (BK 70x50) - thumbnail [ 00644 ]	SERMIK_ID number under which this microscope part is placed in the database. 00644	Carl Zeiss Jena Measuring Toolmakers microscope Element 4 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 4 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
190 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 5 (BK 70x50) - thumbnail [ 00645 ]	SERMIK_ID number under which this microscope part is placed in the database. 00645	Carl Zeiss Jena Measuring Toolmakers microscope Element 5 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 5 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
191 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 6 (BK 70x50) - thumbnail [ 00646 ]	SERMIK_ID number under which this microscope part is placed in the database. 00646	Carl Zeiss Jena Measuring Toolmakers microscope Element 6 (Werkzeugmikroskop / Messmikroskop / BK 70x50 Mikroskop)	The name of this microscope part. Carl Zeiss Jena Measuring Toolmakers microscope Part 6 (BK 70x50)	Description of this part for the microscope. A piece of equipment (working part) for measurement and toolmakers work. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena UMM microscope repair parts mikroskop warsztatowy mikroskop pomiarowy werkzeug mikroskop mess mikroskop werkzeugmikroskop messmikroskop measuring microscope toolmakers microscope carl zeiss jena Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. UMM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. BK 70x50 UMM Epignost	A list of potential uses for this part and when it might be needed. if you need this item for your job if you have this item, but it's of very poor quality or damaged if you need another piece of this item for your job	0000-00-00 00:00:00
192 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ph 20 0,40 phase contrast microscope objective with 20x magnification - thumbnail [ 00643 ]	SERMIK_ID number under which this microscope part is placed in the database. 00643	Carl Zeiss Jena Ph 20 0,40 Phase Contrast microscope objective (Phasenkontrast 20x)	The name of this microscope part. Carl Zeiss Jena Ph 20 0,40 phase contrast microscope objective with 20x magnification	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Ph 20 0,40 Magnification: 20x Correction: Achromat Numerical Aperture: 0,40 Tube Length: 160 mm Focal Length: 33 ... mm Cover Glass: 0.17 mm Immersion: no Thread: RMS Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast. It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Mikroskop Objektiv obiektyw mikroskopowy lens glass soczewka microscope objective kontrast fazowy Phase Contrast Phasen Kontrast Phasenkontrast Ph 20x RMS Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NfPk Ng	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	0000-00-00 00:00:00
193 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Component (article / part / accessory 001) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. - thumbnail [ 00663 ]	SERMIK_ID number under which this microscope part is placed in the database. 00663	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component part 001 element	The name of this microscope part. Component (article / part / accessory 001) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the ... microscope.	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 8	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
194 - Thumbnail photo showing this microscope part. Carl Zeiss Jena sliding micromanipulator component 002 - thumbnail [ 00664 ]	SERMIK_ID number under which this microscope part is placed in the database. 00664	Carl Zeiss Jena sliding micromanipulator component 002	The name of this microscope part. Carl Zeiss Jena sliding micromanipulator component 002	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
195 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Component (article / part / accessory 003) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. - thumbnail [ 00665 ]	SERMIK_ID number under which this microscope part is placed in the database. 00665	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component part 003 element	The name of this microscope part. Component (article / part / accessory 003) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the ... microscope.	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
196 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Component (article / part / accessory 004) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. - thumbnail [ 00666 ]	SERMIK_ID number under which this microscope part is placed in the database. 00666	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component part 004 element	The name of this microscope part. Component (article / part / accessory 004) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the ... microscope.	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
197 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Component (article / part / accessory 005) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. [key tool] - thumbnail [ 00667 ]	SERMIK_ID number under which this microscope part is placed in the database. 00667	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component part 005 element [key tool]	The name of this microscope part. Component (article / part / accessory 005) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the ... microscope. [key tool]	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. [key, tool, Schlüsselwerkzeug, Schlüssel, Werkzeug, klucz, kluczyk] Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator key tool Schlüsselwerkzeug Schlüssel Werkzeug klucz kluczyk Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
199 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Component (article / part / accessory 006) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. - thumbnail [ 00668 ]	SERMIK_ID number under which this microscope part is placed in the database. 00668	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component part 006 element	The name of this microscope part. Component (article / part / accessory 006) of the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the ... microscope.	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. [key, tool, Schlüsselwerkzeug, Schlüssel, Werkzeug, klucz, kluczyk] Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator key tool Schlüsselwerkzeug Schlüssel Werkzeug klucz kluczyk Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
200 - Thumbnail photo showing this microscope part. Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component 007 - thumbnail [ 00669 ]	SERMIK_ID number under which this microscope part is placed in the database. 00669	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component 007	The name of this microscope part. Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) component 007	Description of this part for the microscope. A component of the Carl Zeiss Jena microscope microsurgery equipment (micrurgy equipments, sliding micromanipulator) set. It is part of the micromanipulator set. ... The set in the wooden box is visible in the last photo, but this is only an example. [key, tool, Schlüsselwerkzeug, Schlüssel, Werkzeug, klucz, kluczyk] Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator key tool Schlüsselwerkzeug Schlüssel Werkzeug klucz kluczyk Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments Nf Ng	A list of potential uses for this part and when it might be needed. If you have this set but are missing this part If you want to expand your set with this additional part	0000-00-00 00:00:00
201 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Wooden box for the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope. - thumbnail [ 00670 ]	SERMIK_ID number under which this microscope part is placed in the database. 00670	Carl Zeiss Jena sliding micromanipulator (microscope micrurgy equipments MIPU) wooden box	The name of this microscope part. Wooden box for the Carl Zeiss Jena (microscope micrurgy microsurgery equipment, sliding micromanipulator) micromanipulator kit for the microscope.	Description of this part for the microscope. This wooden box is in perfect condition (this set has never been used). Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments MIPU mikroskop sliding micromanipulator key tool Schlüsselwerkzeug Schlüssel Werkzeug klucz kluczyk Holzkaste Holzkiste Holzschrank Holz Box wooden case wooden box drewniana skrzynka skrzyneczka Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Wooden boxes	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. MIPU micrurgy equipments	A list of potential uses for this part and when it might be needed. If you have such a set but the parts are loose and you are missing the original wooden box.	0000-00-00 00:00:00
202 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease) - thumbnail [ 00671 ]	SERMIK_ID number under which this microscope part is placed in the database. 00671	Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease)	The name of this microscope part. Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease)	Description of this part for the microscope. Original grease for servicing Carl Zeiss Jena microscopes in its original box. Type Gleitfett I E10. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikroskop grease fett smar regrease regreasing wymiana smaru neufetten Fett Gleitfett Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. and model MIPU micrurgy equipments Lumipan Nf Amplival Ergaval	A list of potential uses for this part and when it might be needed. When you need to service your microscope or microscope component and need to replace the lubricants (grease).	0000-00-00 00:00:00
203 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease) - thumbnail [ 00672 ]	SERMIK_ID number under which this microscope part is placed in the database. 00672	Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease)	The name of this microscope part. Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease)	Description of this part for the microscope. Original grease for servicing Carl Zeiss Jena microscopes in its original box. Type Gleitfett II E75. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikroskop grease fett smar regrease regreasing wymiana smaru neufetten Fett Gleitfett Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. and model MIPU micrurgy equipments Lumipan Nf Amplival Ergaval	A list of potential uses for this part and when it might be needed. When you need to service your microscope or microscope component and need to replace the lubricants (grease).	0000-00-00 00:00:00
205 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ergaval microscope head mounting (holder) screw (also for Amplival and many other microscopes). - thumbnail [ 00659 ]	SERMIK_ID number under which this microscope part is placed in the database. 00659	Carl Zeiss Jena Ergaval microscope head holder screw, Amplival	The name of this microscope part. Carl Zeiss Jena Ergaval microscope head mounting (holder) screw (also for Amplival and many other microscopes).	Description of this part for the microscope. Original screw securing the head to the handle / body. The last photo shows which part it is. Fits many Carl Zeiss Jena microscope models, including: - ... Ergaval - Amplival - Docuval - Metaval - Epival - Vertival - Nf - NU - Epityp - Epignost Also for Carl Zeiss Jena devices and accessories such as: - Winkeltube - Pankratik Zoom-System - Interphako - and many others. Note - some models have different dimensions for these screws, for example, longer ones. Note - older models of the Carl Zeiss Jena Lg microscope use a different screw. Note - the small screw at the front of this part unscrews in the OPPOSITE direction than most screws, and this is the most common cause of damage. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Ergaval microscope repair parts Carl Zeiss Jena Ergaval Amplival mikroskop microscope screw śruba Schraube service serwis wymiana naprawa Ersatz Reparatur neufetten broken regrease replacement repair part teil element Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Screws	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ergaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lumipan Nf NU Amplival Ergaval Docuval Epignost Epityp-2	A list of potential uses for this part and when it might be needed. Sometimes this screw is missing in used microscopes. Very often, the tiny screw in this element is broken or missing. This element often has dried grease. This screw is often damaged because when it wouldn't turn due to dried grease, someone used pliers to turn it.	0000-00-00 00:00:00
206 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ergaval microscope stage mounting (holder) screw (also for Amplival and many other microscopes). - thumbnail [ 00660 ]	SERMIK_ID number under which this microscope part is placed in the database. 00660	Carl Zeiss Jena Ergaval microscope stage holder screw \| Amplival	The name of this microscope part. Carl Zeiss Jena Ergaval microscope stage mounting (holder) screw (also for Amplival and many other microscopes).	Description of this part for the microscope. Original screw securing the stage to the holder. The last photo shows which part it is. Fits many Carl Zeiss Jena microscope models, including: - ... Ergaval - Amplival - Docuval - Metaval - Epival - Vertival - Nf - NU Note: Please examine the photos carefully. If I have more than one of this part, some of the screws may show traces of improper (forceful) unscrewing. These are not major traces - mostly minor scratches. Of course, they do not affect the functionality of the element at all. Note - some models have different screw dimensions, for example, longer ones. Note - in microscopes with a centering stage holder (for polarizing stages), this screw may be different. Note - the small screw at the front of this part unscrews in the OPPOSITE direction than most screws, and this is the most common cause of damage. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Ergaval microscope repair parts Carl Zeiss Jena Ergaval Amplival mikroskop microscope screw śruba Schraube service serwis wymiana naprawa Ersatz Reparatur neufetten broken regrease replacement repair part teil element stolik stage Mikroskoptisch holder uchwyt Halter Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Screws	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ergaval Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lumipan Nf NU Amplival Ergaval Docuval	A list of potential uses for this part and when it might be needed. Sometimes this screw is missing in used microscopes. Very often, the tiny screw in this element is broken or missing. This element often has dried grease. This screw is often damaged because when it wouldn't turn due to dried grease, someone used pliers to turn it.	0000-00-00 00:00:00
207 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Glass-Kleinkuvette 8 5 cm - glass spectrophotometric cuvettes (for spectrophotometry, for spectrophotometers) - thumbnail [ 00661 ]	SERMIK_ID number under which this microscope part is placed in the database. 00661	Carl Zeiss Jena Glass-Kleinkuvette 8 5 cm / Cuvettes for Spectrophotometer / Spekol	The name of this microscope part. Carl Zeiss Jena Glass-Kleinkuvette 8 5 cm - glass spectrophotometric cuvettes (for spectrophotometry, for spectrophotometers)	Description of this part for the microscope. An original Carl Zeiss Jena set of four (4) cuvettes with caps in a wooden box. As far as I know, they date from the second half of the 1970s. It's quite possible they ... were used in Spekol devices. Definitely better quality than inexpensive Chinese cuvettes. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Spekol 11 microscope repair parts Mikroskop microscope Spekol 11 Carl Zeiss Jena Spectrophotometer spectrophotometry Spektrophotometer Raman UV VIS kuwety Glasküvetten glass cuvette Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Other	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Spekol 11 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. Spekol 11	A list of potential uses for this part and when it might be needed. If you lack 5 mm glass cuvettes for your work	0000-00-00 00:00:00
210 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Vintage Carl Zeiss Jena microscope eyepiece with engraved logo. I don't know the magnification. - thumbnail [ 00655 ]	SERMIK_ID number under which this microscope part is placed in the database. 00655	Carl Zeiss Jena vintage microscope eyepiece with engraved logo. I don't know what magnification.	The name of this microscope part. Vintage Carl Zeiss Jena microscope eyepiece with engraved logo. I don't know the magnification.	Description of this part for the microscope. Microscope eyepiece (1 pc.) Manufacturer: Carl Zeiss Jena Magnification: ? Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Vintage microscope repair parts vintage antique school Schulmikroskop Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Praktycznie każdy z TL = finite	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00
211 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Vintage Carl Zeiss Jena "3" microscope eyepiece 8x No. 3 with engraved logo. - thumbnail [ 00656 ]	SERMIK_ID number under which this microscope part is placed in the database. 00656	Carl Zeiss Jena "3" vintage microscope eyepiece 8x No. 3 with engraved logo.	The name of this microscope part. Vintage Carl Zeiss Jena "3" microscope eyepiece 8x No. 3 with engraved logo.	Description of this part for the microscope. Microscope eyepiece (1 pc.) Manufacturer: Carl Zeiss Jena Model: 3 Magnification: 8x Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Vintage microscope repair parts vintage antique antik mikroskop okular microscope eyepiece Carl Zeiss Jena okular mikroskopowy stary mikroskop zabytkowy antyczny Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Praktycznie każdy z TL = finite	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00
212 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Vintage Carl Zeiss Jena "5" microscope eyepiece 12x No. 5 with engraved logo. - thumbnail [ 00657 ]	SERMIK_ID number under which this microscope part is placed in the database. 00657	Carl Zeiss Jena "5" vintage microscope eyepiece 12x No. 5 with engraved logo.	The name of this microscope part. Vintage Carl Zeiss Jena "5" microscope eyepiece 12x No. 5 with engraved logo.	Description of this part for the microscope. Microscope eyepiece (1 pc.) Manufacturer: Carl Zeiss Jena Model: 5 Magnification: 12x Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Vintage microscope repair parts vintage antique antik mikroskop okular microscope eyepiece Carl Zeiss Jena okular mikroskopowy stary mikroskop zabytkowy antyczny Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Praktycznie każdy z TL = finite	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	0000-00-00 00:00:00

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.