More about part: Zeiss Axioplan 2 microscope 30mm photo eyepiece tube for 452143 trinocular head (ID: 99898)
Zeiss Axioplan 2 microscope 30mm photo eyepiece tube for 452143 trinocular head
Main Photo
Description
Zeiss Axioplan 2 microscope 30mm photo eyepiece tube for 452143 trinocular headTube for mounting the photo projection eyepiece in the Carl Zeiss 45 21 43 trinocular head and similar ones.
This particular photo eyepiece holder was removed from a Zeiss 452143 microscope head - but most probably it also fits other heads of the Zeiss AIM systems and of Zeiss Axioplan 2 microscopes, for example:
- Zeiss 452142
- Zeiss 452143
- Zeiss 452145
- Zeiss 452146
These photo-trino heads which I listed above are used, directly or through suitable adapters, among others in the following microscopes:
- Zeiss Axioplan 2
- Zeiss Axioskop 2
- Zeiss Axiophot 2
- Zeiss AIM
- Zeiss Axiotech
- and probably others
Basic parameters of this tube:
- Mounting to the trinocular head
- with 3 screws
- Overall length
- 50 mm
- Length protruding above the housing of the head
- approx. 25 mm
- Inner diameter
- 30 mm - for use with photo / projection eyepieces of this diameter
- Camera installation possible
- yes, a so-called USB eyepiece can be mounted in this tube
- Centering
- yes, the mounted camera or eyepiece can be centered with three centering screws
VERY IMPORTANT: this short tube (it can also be called a holder of the photo projection eyepiece) is screwed to the head with 3 (three) screws. In the photo only 2 (two) are visible - and this is exactly the item I am offering here, because I lost one of the screws. It is a minor thing - but it has to be mentioned.
In the last photo an arrow shows where this part is located in the head, so that it can be identified without any doubt.
Manufacturer
Zeiss - (Carl Zeiss West Germany) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if you have one of the Zeiss photo/trino heads mentioned in the description without such a tube
- if you have one of the Zeiss photo/trino heads mentioned in the description with a different tube - and you want to replace it with one with a 30 mm opening
- if you want to use this tube for a 30 mm photo eyepiece in your own DIY project
Compatibility
This microscope part is compatible with the following microscope models:
- Zeiss Axioplan 2
- Zeiss Axiophot 2
- Zeiss Axioskop 2
- Zeiss AIM
- Zeiss Axiotech


