Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Jena microscopes over nearly 100 years. They differ in the appearance of the barrel and in the engraving.

Appearance of this variant of the Carl Zeiss Jena 8x objective:
- black section next to the thread
- silver upper section
- the digit "8" on the first line and "0,20" on the second line, on one side of the silver part of the barrel
- the Carl Zeiss Jena logo and the serial number on the other side of the silver barrel

Here (https://www.microscopeparts.eu/part/99851) you will see the same Carl Zeiss Jena 8x objective, but in a slightly newer variant (with the value "160/-" engraved on the barrel).

The Carl Zeiss Jena 8x objective is often used for macro photography - both on a microscope and on a camera (with an RMS adapter or a bellows unit). Although it is an achromatic objective, it renders fine detail very well and works nicely for focus stacking. It is a good complement to a set together with the Carl Zeiss Jena Semiplan 3.2x, LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x objectives.

Basic parameters of this objective:
Manufacturer: Carl Zeiss Jena
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0,20
Numerical aperture N.A.: 0.20
Serial number: 503 729
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: either way - objectives with such a low magnification can work both with and without a cover glass
Immersion: no (a so-called dry objective)
Thread: RMS

Important - this objective is suitable for taking pictures with the "direct-projection" technique, because it does not require plan-compensating optics.

A microscope objective with such a low magnification (keeping the 160 mm tube we get an 8:1 reproduction ratio) is used for observation or macro photography of, among other things:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells

Why do I describe the appearance of this variant so precisely in the description of this objective? Some users care about completing their Carl Zeiss Jena microscope with parts from the same series and roughly from the same period. The exact way the parameters are written on the barrel makes it possible to compare this objective not only from the photos in the gallery, but also at the level of the text description - especially for AI systems.

This is a so-called "short barrel objective", with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which makes it possible to use it in microscopes that require objectives with a parfocal length of 45 mm. Professional adapters with corrective optics work well here, as do plain metal adapters and the popular DIY parts from a 3D printer.

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and supports objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if we use a suitable adapter). A few examples of such microscopes are listed in the "compatibility" section, but that is not a complete list.

Carl Zeiss Jena objectives are very popular among users of microscopes from other manufacturers. Because of the historical connections, owners of LOMO microscopes treat them as an obvious replacement for their own Soviet optics.

After the Second World War the Carl Zeiss Jena production plant ended up in the Soviet occupation zone, and the Russians began copying the German technical documentation - see for yourself that the LOMO 8x objectives are an exact copy of the objective presented here: https://www.microscopeparts.eu/?search_2=8x&search_7=ob&search_8=lomo. The objectives made for school microscopes such as the Opta Junat are also a clone of Carl Zeiss Jena optics: https://www.microscopeparts.eu/part/00639.

Description of this part for the microscope.

Jena microscopes over nearly 100 years. They differ in the appearance of the barrel and in the engraving.

Appearance of this variant of the Carl Zeiss Jena 8x objective:
- black section next to the thread
- silver upper section
- the marking "8/0,20 160/-" on one side of the silver part of the barrel
- the Carl Zeiss Jena logo and the serial number on the other side of the silver barrel

Here (https://www.microscopeparts.eu/part/99852) you will see the same Carl Zeiss Jena 8x objective, but in a slightly older variant (without the value "160/-" engraved on the barrel).

The Carl Zeiss Jena 8x objective is often used for macro photography - both on a microscope and on a camera (with an RMS adapter or a bellows unit). Although it is an achromatic objective, it renders fine detail very well and works nicely for focus stacking. It is a good complement to a set together with the Carl Zeiss Jena Semiplan 3.2x, LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x objectives.

Basic parameters of this objective:
Manufacturer: Carl Zeiss Jena
Magnification: 8x
Correction: achromatic
Marking on the objective: 8/0,20 160/-
Numerical aperture N.A.: 0.20
Serial number: above 580 000
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: either way - objectives with such a low magnification can work both with and without a cover glass
Immersion: no (a so-called dry objective)
Thread: RMS

Important - this objective is suitable for taking pictures with the "direct-projection" technique, because it does not require plan-compensating optics.

A microscope objective with such a low magnification (keeping the 160 mm tube we get an 8:1 reproduction ratio) is used for observation or macro photography of, among other things:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells

Why do I describe the appearance of this variant so precisely in the description of this objective? Some users care about completing their Carl Zeiss Jena microscope with parts from the same series and roughly from the same period. The exact way the parameters are written on the barrel makes it possible to compare this objective not only from the photos in the gallery, but also at the level of the text description - especially for AI systems.

This is a so-called "short barrel objective", with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which makes it possible to use it in microscopes that require objectives with a parfocal length of 45 mm. Professional adapters with corrective optics work well here, as do plain metal adapters and the popular DIY parts from a 3D printer.

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and supports objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if we use a suitable adapter). A few examples of such microscopes are listed in the "compatibility" section, but that is not a complete list.

Carl Zeiss Jena objectives are very popular among users of microscopes from other manufacturers. Because of the historical connections, owners of LOMO microscopes treat them as an obvious replacement for their own Soviet optics.

After the Second World War the Carl Zeiss Jena production plant ended up in the Soviet occupation zone, and the Russians began copying the German technical documentation - see for yourself that the LOMO 8x objectives are an exact copy of the objective presented here: https://www.microscopeparts.eu/?search_2=8x&search_7=ob&search_8=lomo. The objectives made for school microscopes such as the Opta Junat are also a clone of Carl Zeiss Jena optics: https://www.microscopeparts.eu/part/00639.

Description of this part for the microscope.

catalogue number: 46 78 36 (also written as 467836)
Colour: blue matt
Diameter: 32 mm
Material: glass

This is a filter that combines the functions of a blue filter and a ground glass diffuser:
- the blue filter is used to convert the yellow, warm light of the bulb into light closer to white light
- the matt filter (called a diffuser or ground glass) is used to even out the light across the whole area of the specimen and to remove the visible filament of the bulb

This does, however, have one consequence: without a visible filament it is not possible to work with illumination set up according to the Koehler method - and Zeiss mentions this in the leaflet supplied with the filter.

Very often only one or two microscope filters can be fitted in a microscope, for example one on the illuminator and the second in the holder below the condenser. The fact that the glass filter offered here is a 2-in-1 solution makes it possible to save the possible second slot for another filter.

The diameter of 32 mm is a standard with many manufacturers, which means this filter can be used with microscopes of numerous brands. The "compatibility" section lists over a dozen such microscopes, but it is not a complete list.

Description of this part for the microscope.

10x
Mounting diameter: 23.2 mm

Because this is important, I will write it again: this is a single eyepiece, not a pair of eyepieces.

This is a solution for people who:
- either have a pair of these eyepieces, but one of them needs to be replaced
- or have a microscope with a monocular head

For Will Wetzlar microscopes, eyepieces from practically any manufacturer can be used, provided that they are designed for a finite tube length system and have a mounting diameter of 23.2 mm. However, many users appreciate having original parts.

This eyepiece also works the other way around - it fits almost any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Users of microscopes from many manufacturers are happy to choose German eyepieces because of their high quality. I have included some examples in the "compatibility" section, but this is definitely not a complete list.

Microscope users have several names for eyepieces of this type with a large field of view. Among others:
- wide field eyepiece
- widefield ocular
- WF eyepiece
- wide angle eyepiece
- large field of view eyepiece

Description of this part for the microscope.

objective:
Manufacturer: Zeiss West Germany
Engraving on the objective: Planapo 63/1,4 Oel 160/-
Manufacturer catalogue number: 46 18 40 - 9901 (also written as 461840-9901)
Magnification: 63x
Numerical aperture (N.A.): 1.4
Optical correction: plan-apochromatic
Immersion: yes, oil
Coverslip: according to the engraving on the barrel of this objective, it can be used both without a coverslip and with a standard coverslip of 0.17 mm thickness
Tube length: 160 mm
Parfocal distance: 45 mm
Thread: RMS
Specimen protection: yes, the objective has a spring-loaded mechanism preventing the slide with the specimen from being broken
Phase contrast: no - the objective has no phase rings inside
DIC: prisms allowing work in DIC mode are available on the market for this objective (sold separately)

This objective fits practically any microscope of any manufacturer, provided it has an RMS thread and accepts objectives for a 160 mm tube length with a parfocal distance of 33, 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.

Description of this part for the microscope.

objective:
Manufacturer: Lomo (ЛОМО)
Magnification: 40x
Correction: achromatic
Engraving on the objective: 40 0,65 Ф-2 ЛОМО
Numerical aperture N.A.: 0,65
Working distance: 0,55 mm
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: yes, 0,17 mm thick
Phase contrast: yes, type F-2 (Ф-2), which means there are two phase rings inside the objective
Immersion: no (dry objective, sometimes called an "air immersion" objective)
Specimen protection: no, the objective has no spring-loaded mechanism
Thread: RMS
Work in brightfield without phase contrast: possible, but even the manufacturer states in the manual that the image quality is worse than with an objective without phase rings inside

A very important note: two phase rings inside an objective bring to mind variable phase contrast (PhZ at PZO or PhV at Carl Zeiss Jena). With LOMO, however, this is rather something like a "second type of positive phase contrast". LOMO states in the manual (https://laboratorium.dp.ua/item/68) that one image is obtained when light passes through both rings (with the condenser iris diaphragm open) - and a different one when the diaphragm is closed far enough that light no longer reaches the outer, wide ring and only the inner ring works. The manufacturer recommends viewing the specimen in both modes, because together they give a more reliable idea of its structure. The contrast stays positive (thicker or denser parts of the specimen appear darker against a bright background), and both modes differ from work with the single-ring "Ф" objectives and the LOMO KF-4 condenser (ЛОМО KФ-4), where both the objective and the condenser diaphragm have only one ring. So the resulting effect does change - but this is not variable phase contrast; the change is stepwise (either-or), not continuous.

The objective presented here fits the LOMO KF-5 condenser (ЛОМО KФ-5). That condenser has a mounting diameter of 37 mm and is very often used on microscopes from other makers, among them Carl Zeiss Jena and Olympus (especially Olympus CH). With a suitable build-up ring fitted (3D printed, for example), this condenser is commonly used in microscopes with a 39,5 mm condenser seat as well. The instructions for setting up LOMO KF-5 phase contrast can be found here: https://scopica.ru/proj/ustroystvo-dlya-nablyudeniya-metodom-fazovogo-kontrasta-kf-5/

This is a so-called short barrel objective, with a parfocal length of 33 mm. It is very commonly mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives of 45 mm length. Professional adapters with protective optics, metal adapters and the popular 3D printed DIY solutions all work here.

LOMO objectives are very popular with owners of microscopes from other makers. Because of the historical links, owners of Carl Zeiss Jena microscopes treat them as an obvious substitute for those German objectives.

This objective fits practically any microscope from any maker, provided it has an RMS thread and accepts objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if a suitable adapter is used). A few such microscopes are listed in the "compatibility" section, but that is not a complete list.

Description of this part for the microscope.

the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 40x
Correction: achromatic
Marking on the objective: 40 0,65
Numerical aperture N.A.: 0,65
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.

A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

4x
Kind: projection eyepiece for photomicrography
Intended for: microscopes corrected for objectives with TL = 170 mm
Mounting diameter: 23.2 mm

Projection eyepieces are special microscope eyepieces used to project the microscopic image onto the sensor of a camera. Many microscope photo tubes and trinocular heads have a seat for a projection eyepiece.

Leitz projection eyepieces of this magnification carry several different markings. You will find "Proj.-Ok. H4x", "Proj.-Ok. P4X" and - as on the item offered here - simply "Proj. 4x". The letter H stands for the Huygens design. Leitz also made projection eyepieces of other magnifications, 2.5x among them, so the 4x version is not the only one in this family.

The eyepiece is intended for microscopes with a mechanical tube length of 170 mm. The older Leitz stands are corrected this way, Orthoplan, Ortholux, SM and SM-D among others. Later microscopes of this brand already work with a 160 mm tube. In Leitz optics of this generation part of the chromatic aberration correction is deliberately moved from the objective to the eyepiece, so matching an eyepiece to an objective is not merely a mechanical question here.

Despite its name, this eyepiece behaves differently from a typical projection eyepiece. It does not form a real image at a fixed distance, but projects the image to infinity - exactly like an ordinary viewing eyepiece. This makes it excellent for the afocal method, that is, photographing with a camera that keeps its own lens placed above the eyepiece. Leitz itself built its photographic adapters on precisely this method.

Leitz "Proj." eyepieces also found use outside microscopy. Eyepieces of this family were part of the microprojection attachments for the Leitz Prado and Pradovit projectors, which threw the image of a specimen onto a screen for a whole lecture room. If you are completing such an attachment, this is exactly the part.

Use in a microscope with a 160 mm tube length remains a matter of your own DIY modification. Mechanically the eyepiece fits any 23.2 mm seat, but the intermediate image is then formed in a different place, so focus and image scale will come out differently from what the manufacturer intended. There is, however, a route that gives a beautiful combination: into a microscope of another manufacturer you fit a Leitz Wetzlar objective computed for 170 mm, and this eyepiece above it. The optical path is then entirely Leitz - objective and eyepiece work as they were designed to, and only the stand remains foreign, a PZO or a Carl Zeiss Jena one for instance.

The "compatibility" section lists the microscope models this eyepiece can be used with, but that list is of course not complete. This projection eyepiece can be used with any microscope of any manufacturer, as long as it has a tube or another seat for an eyepiece of 23.2 mm diameter - subject to the difference between 160 and 170 mm tube length (I write about this above).

Description of this part for the microscope.

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Description of this part for the microscope.

5x
Field of view number: 16
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

Description of this part for the microscope.

of view number: 12
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

A note - eyepieces with such a strong magnification are in my opinion better suited to a quick look than to permanent work. I write "in my opinion" on purpose, because this comes from using them and not from the manufacturer's description.
A 16x eyepiece magnification should be treated as a zoom that brings out no additional detail (the resolution is not increased). This matters for example with heads that have their own extra magnification (such as Carl Zeiss Jena heads with a built-in 1.5x or 1.6x factor) - working with a 100x oil immersion objective you then theoretically get 100*1.5*16 = 2400x, while physics does not allow light from the visible range to be usefully magnified for the human eye beyond roughly 1250x - so this is what is called empty magnification.

Description of this part for the microscope.

the manufacturer's 1967 catalog: 519 237 (alternative notation: 519237)
Numerical aperture N.A.: 0.40
Tube length: 170 mm
Parfocal length: 37 mm
Working distance: 3.4 mm
Cover glass: either - the objective works both without and with a cover glass
Immersion: no (dry objective)
Thread: RMS

Because it works without a cover glass and has a high numerical aperture N.A., this objective can be attractive for macro photographers. It allows projection directly onto the camera sensor - without any intermediate optics.

This objective was removed from a Leitz SM microscope, but it fits most Leitz Wetzlar microscopes made before roughly 1980 (SM, SM-D, SM-Lux, Dialux, Ortholux, Orthoplan, etc.).

Some useful information about Leitz Wetzlar objectives with TL=170 mm and 37 mm parfocal length:
- most Leitz microscopes made before roughly 1980 accept objectives for both 160 mm and 170 mm tube length
- many Leitz microscopes accept objectives with both 37 mm and 45 mm parfocal length
- with an 8 mm RMS extension adapter, such an objective gets a parfocal length of 45 mm. Leitz made such adapters under the name "Plezy" - but many users make their own, from metal or on 3D printers

Like a large share of microscope objectives made in Germany in the 1960s and 1970s, this objective has a 37 mm parfocal length and a 170 mm tube length. For this reason it is often used as a replacement objective for other German microscopes, e.g.:
- Steindorff Berlin
- Kremp Wetzlar
- Hertel & Reuss
- Steinmar Berlin
- CBS Beck Kassel
- ROW Rathenow

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL=170 mm and a parfocal length of 33 / 37 mm (or 45 mm with a suitable adapter). Some examples of such microscopes are listed in the "compatibility" section, but this list is not complete.

Description of this part for the microscope.

microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

achromatic
Numerical aperture N.A.: 0.30
Tube length: 170 mm
Parfocal length: 37 mm
Cover glass: yes, 0.17 mm thick
Immersion: no (dry objective)
Thread: RMS

The Steindorff 10x objective is also suitable for macro photography, as it does not require a cover glass and allows direct projection onto the camera sensor without intermediate optics.

This is a so-called "short objective", with a parfocal length of 37 mm. It is particularly common to mount this objective on an 8 mm extension, which makes it possible to use the objective in microscopes requiring objectives with a parfocal length of 45 mm. Both professional adapters with protective optics and metal adapters, as well as popular DIY solutions made with a 3D printer, work well for this purpose.

Like a large proportion of microscope objectives manufactured in Germany in the 1960s and 1970s, this objective has a parfocal length of 37 mm and a tube length of 170 mm. This means that it is often used as a replacement objective for other German microscopes, such as:
- Leitz Wetzlar
- Kremp Wetzlar
- Hertel & Reuss
- Steinmar Berlin
- CBS Beck Kassel
- ROW Rathenow

This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives designed for TL = 170 mm and with a parfocal length of 33 / 37 mm (or 45 mm when using a suitable adapter). Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.

Description of this part for the microscope.

20x
Correction: Fluotar (other names: Fluor and fluorite)
Numerical aperture N.A.: 0.60
Tube length: 160 mm
Parfocal length: 33 mm
Cover glass: yes, 0.17 mm thick
Immersion: no (dry objective)
Thread: RMS

The objective comes in its original protective case marked "Wild Heerbrugg Switzerland".

Fluotar is the name Wild Heerbrugg used for its fluorite objectives, i.e. semi-apochromats - their lenses contain fluorite or glass with similar optical properties. A standard achromat corrects chromatic errors for only two colors (red and blue), so colored fringes may appear along the edges of objects. An apochromat corrects for three colors (red, green and blue) and represents the highest class of correction. The Fluotar sits between them - colored fringes are clearly smaller than with an achromat, although the correction is not as complete as with an apochromat. Fluorite also transmits ultraviolet light well, which is why objectives of this type were used in fluorescence microscopy.

This is a so-called "short barrel" objective with a parfocal length of 33 mm. It is very common to mount this objective on a 12 mm extension, which allows it to be used in microscopes that require 45 mm parfocal objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

for inverted and upright biological microscopes, made in Japan.

Basic objective parameters:
Manufacturer: Nikon, Japan
Model: Ph3 40 DL 0.55 LWD 160/0-2
Magnification: 40x
Numerical aperture (N.A.): 0.55
Optical correction: achromat
Phase contrast: Ph3 DL - Ph3 indicates the size of the phase ring (requires a matching Ph3 annulus in the condenser), DL (Dark Low) means dark, i.e. positive phase contrast - the object appears darker than the background
Working distance (WD): ~2.1 - 2.5 mm - LWD (Long Working Distance)
Correction collar: compensates for cover glass or vessel bottom thickness in the range 0 - 2.0 mm
Cover glass: the objective can be used without a cover glass, with a standard cover glass approx. 0.17 mm thick, and also with specimens observed through the bottom of a Petri dish up to 2.0 mm thick
Immersion: no (dry objective)
Tube length: 160 mm
Parfocal length: 45 mm
Thread: RMS
Optics: CF (Nikon CF-160) - requires no compensating eyepiece and allows photography by direct projection

This objective is suitable for:
- inverted microscopes - observation through the bottom of a Petri dish or cell culture flask
- upright biological microscopes - observation of specimens with or without a cover glass

Phase contrast work requires a compatible phase contrast condenser or a slider with a phase contrast annulus.

Commonly used, inexpensive cover glasses are 0.17 mm thick mainly in theory. Even the standard for class #1.5 allows a range of 0.16 - 0.19 mm, and in cheap Chinese cover glasses you will find in practice pieces from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. Variation in cover glass thickness clearly degrades image contrast and resolution (spherical aberration). The correction collar fitted to the objective offered here lets you adjust the optics to the combined thickness of the cover glass and the medium layer beneath it. This compensates for most of the variation found in practice.

In addition, the correction collar of this objective can be set to "0" for work without a cover glass, or to large values (up to 2.0 mm) to adapt the optics to observation through a microscope slide (0.8 - 1.2 mm), a glass Petri dish (usually 1.5 - 2.0 mm - thicker dishes are outside the collar range) or a plastic Petri dish (usually approx. 1 mm, in the range 0.8 - 1.2 mm).

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and uses objectives for 160 mm tube length with a parfocal length of 33, 37 or 45 mm. Some example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Göttingen
Magnification: 5x
Optical correction: achromat
Numerical aperture N.A.: 0.10
Parfocal length: 37 mm
Tube length: 170 mm
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no - this is a dry objective
Thread: RMS

This is a so-called "short barrel" objective with a parfocal length of 37 mm. It is very often mounted on an 8 mm extension, which allows it to be used in microscopes that require 45 mm (long barrel) objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.

The company "Dr. G. Schuchardt Göttingen" did not manufacture microscopes and does not manufacture them today. In the past it mainly sold microscopes made by Hertel & Reuss and Will Wetzlar under its own brand, today its products are imported from China.

This objective fits virtually any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives for TL = 170 mm with a parfocal length of 33 or 37 mm (or 45 mm when a suitable adapter is used). Several example microscopes are listed in the "Compatibility" section, but the list is not complete.

Description of this part for the microscope.

Göttingen
Magnification: 50x
Optical correction: achromat
Numerical aperture N.A.: 0.82
Parfocal length: 37 mm
Tube length: 170 mm
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Thread: RMS

This is a so-called "short barrel" objective with a parfocal length of 37 mm. It is very often mounted on an 8 mm extension, which allows it to be used in microscopes that require 45 mm (long barrel) objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.

The company "Dr. G. Schuchardt Göttingen" did not manufacture microscopes and does not manufacture them today. In the past it mainly sold microscopes made by Hertel & Reuss and Will Wetzlar under its own brand, today its products are imported from China.

This objective fits virtually any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives for TL = 170 mm with a parfocal length of 33 or 37 mm (or 45 mm when a suitable adapter is used). Several example microscopes are listed in the "Compatibility" section, but the list is not complete.

Description of this part for the microscope.

(ЛОМО)
Version: this is the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 90x
Correction: achromatic
Marking on the objective: A 90*1.25
Numerical aperture N.A.: 1.25
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.

Apart from the missing manufacturer name, the export version also differs in the way the parameters are marked. On the LOMO version the marking read "МИ 90 1.25", where "МИ" is an abbreviation written in Cyrillic, corresponding to "MI" and meaning "oil immersion". The export version dropped the Cyrillic (and even the immersion information), and the marking changed to "A 90*1.25".

A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "66"
Year of manufacture: 1966
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

The LOMO 8x objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "86"
Year of manufacture: 1986
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "72"
Year of manufacture: 1972
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "74"
Year of manufacture: 1974
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "85"
Year of manufacture: 1985
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "93"
Year of manufacture: 1993
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "75"
Year of manufacture: 1975
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "79"
Year of manufacture: 1979
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "80"
Year of manufacture: 1980
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "89"
Year of manufacture: 1989
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

objective:
Manufacturer: LOMO, Russia (ЛОМО)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

2 mm

Because this is important, I will write it again: this is a single eyepiece, not a pair of eyepieces.

This is a solution for people who:
- either have a pair of these eyepieces, but one of them needs to be replaced
- or have a microscope with a monocular head

For Will Wetzlar microscopes, eyepieces from practically any manufacturer can be used, provided that they are designed for a finite tube length system and have a mounting diameter of 23.2 mm. However, many users appreciate having original parts.

This eyepiece also works the other way around - it fits almost any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Users of microscopes from many manufacturers are happy to choose German eyepieces because of their high quality. I have included some examples in the "compatibility" section, but this is definitely not a complete list.

Description of this part for the microscope.

2 mm

Because this is important, I will write it again: this is a single eyepiece, not a pair of eyepieces.

This is a solution for people who:
- either have a pair of these eyepieces, but one of them needs to be replaced
- or have a microscope with a monocular head

For Will Wetzlar microscopes, eyepieces from practically any manufacturer can be used, provided that they are designed for a finite tube length system and have a mounting diameter of 23.2 mm. However, many users appreciate having original parts.

This eyepiece also works the other way around - it fits almost any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Users of microscopes from many manufacturers are happy to choose German eyepieces because of their high quality. I have included some examples in the "compatibility" section, but this is definitely not a complete list.