Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "72"
Year of manufacture: 1972
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "86"
Year of manufacture: 1986
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "66"
Year of manufacture: 1966
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

The LOMO 8x objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

(ЛОМО)
Version: this is the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 90x
Correction: achromatic
Marking on the objective: A 90*1.25
Numerical aperture N.A.: 1.25
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.

Apart from the missing manufacturer name, the export version also differs in the way the parameters are marked. On the LOMO version the marking read "МИ 90 1.25", where "МИ" is an abbreviation written in Cyrillic, corresponding to "MI" and meaning "oil immersion". The export version dropped the Cyrillic (and even the immersion information), and the marking changed to "A 90*1.25".

A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

for inverted and upright biological microscopes, made in Japan.

Basic objective parameters:
Manufacturer: Nikon, Japan
Model: Ph3 40 DL 0.55 LWD 160/0-2
Magnification: 40x
Numerical aperture (N.A.): 0.55
Optical correction: achromat
Phase contrast: Ph3 DL - Ph3 indicates the size of the phase ring (requires a matching Ph3 annulus in the condenser), DL (Dark Low) means dark, i.e. positive phase contrast - the object appears darker than the background
Working distance (WD): ~2.1 - 2.5 mm - LWD (Long Working Distance)
Correction collar: compensates for cover glass or vessel bottom thickness in the range 0 - 2.0 mm
Cover glass: the objective can be used without a cover glass, with a standard cover glass approx. 0.17 mm thick, and also with specimens observed through the bottom of a Petri dish up to 2.0 mm thick
Immersion: no (dry objective)
Tube length: 160 mm
Parfocal length: 45 mm
Thread: RMS
Optics: CF (Nikon CF-160) - requires no compensating eyepiece and allows photography by direct projection

This objective is suitable for:
- inverted microscopes - observation through the bottom of a Petri dish or cell culture flask
- upright biological microscopes - observation of specimens with or without a cover glass

Phase contrast work requires a compatible phase contrast condenser or a slider with a phase contrast annulus.

Commonly used, inexpensive cover glasses are 0.17 mm thick mainly in theory. Even the standard for class #1.5 allows a range of 0.16 - 0.19 mm, and in cheap Chinese cover glasses you will find in practice pieces from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. Variation in cover glass thickness clearly degrades image contrast and resolution (spherical aberration). The correction collar fitted to the objective offered here lets you adjust the optics to the combined thickness of the cover glass and the medium layer beneath it. This compensates for most of the variation found in practice.

In addition, the correction collar of this objective can be set to "0" for work without a cover glass, or to large values (up to 2.0 mm) to adapt the optics to observation through a microscope slide (0.8 - 1.2 mm), a glass Petri dish (usually 1.5 - 2.0 mm - thicker dishes are outside the collar range) or a plastic Petri dish (usually approx. 1 mm, in the range 0.8 - 1.2 mm).

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and uses objectives for 160 mm tube length with a parfocal length of 33, 37 or 45 mm. Some example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

20x
Correction: Fluotar (other names: Fluor and fluorite)
Numerical aperture N.A.: 0.60
Tube length: 160 mm
Parfocal length: 33 mm
Cover glass: yes, 0.17 mm thick
Immersion: no (dry objective)
Thread: RMS

The objective comes in its original protective case marked "Wild Heerbrugg Switzerland".

Fluotar is the name Wild Heerbrugg used for its fluorite objectives, i.e. semi-apochromats - their lenses contain fluorite or glass with similar optical properties. A standard achromat corrects chromatic errors for only two colors (red and blue), so colored fringes may appear along the edges of objects. An apochromat corrects for three colors (red, green and blue) and represents the highest class of correction. The Fluotar sits between them - colored fringes are clearly smaller than with an achromat, although the correction is not as complete as with an apochromat. Fluorite also transmits ultraviolet light well, which is why objectives of this type were used in fluorescence microscopy.

This is a so-called "short barrel" objective with a parfocal length of 33 mm. It is very common to mount this objective on a 12 mm extension, which allows it to be used in microscopes that require 45 mm parfocal objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

of view number: 12
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

A note - eyepieces with such a strong magnification are in my opinion better suited to a quick look than to permanent work. I write "in my opinion" on purpose, because this comes from using them and not from the manufacturer's description.
A 16x eyepiece magnification should be treated as a zoom that brings out no additional detail (the resolution is not increased). This matters for example with heads that have their own extra magnification (such as Carl Zeiss Jena heads with a built-in 1.5x or 1.6x factor) - working with a 100x oil immersion objective you then theoretically get 100*1.5*16 = 2400x, while physics does not allow light from the visible range to be usefully magnified for the human eye beyond roughly 1250x - so this is what is called empty magnification.

Description of this part for the microscope.

5x
Field of view number: 16
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

Description of this part for the microscope.

100x
Colour correction: achromatic
Model: E. 100 1.25 oil 160/0.17
Numerical aperture N.A.: 1.25
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: yes, oil
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.

Description of this part for the microscope.

correction: achromatic
Model: E 40 0.65 160/0.17
Numerical aperture N.A.: 0.65
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: no
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.

Description of this part for the microscope.

the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 40x
Correction: achromatic
Marking on the objective: 40 0,65
Numerical aperture N.A.: 0,65
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.

A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective:
Manufacturer: Lomo (ЛОМО)
Magnification: 40x
Correction: achromatic
Engraving on the objective: 40 0,65 Ф-2 ЛОМО
Numerical aperture N.A.: 0,65
Working distance: 0,55 mm
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: yes, 0,17 mm thick
Phase contrast: yes, type F-2 (Ф-2), which means there are two phase rings inside the objective
Immersion: no (dry objective, sometimes called an "air immersion" objective)
Specimen protection: no, the objective has no spring-loaded mechanism
Thread: RMS
Work in brightfield without phase contrast: possible, but even the manufacturer states in the manual that the image quality is worse than with an objective without phase rings inside

A very important note: two phase rings inside an objective bring to mind variable phase contrast (PhZ at PZO or PhV at Carl Zeiss Jena). With LOMO, however, this is rather something like a "second type of positive phase contrast". LOMO states in the manual (https://laboratorium.dp.ua/item/68) that one image is obtained when light passes through both rings (with the condenser iris diaphragm open) - and a different one when the diaphragm is closed far enough that light no longer reaches the outer, wide ring and only the inner ring works. The manufacturer recommends viewing the specimen in both modes, because together they give a more reliable idea of its structure. The contrast stays positive (thicker or denser parts of the specimen appear darker against a bright background), and both modes differ from work with the single-ring "Ф" objectives and the LOMO KF-4 condenser (ЛОМО KФ-4), where both the objective and the condenser diaphragm have only one ring. So the resulting effect does change - but this is not variable phase contrast; the change is stepwise (either-or), not continuous.

The objective presented here fits the LOMO KF-5 condenser (ЛОМО KФ-5). That condenser has a mounting diameter of 37 mm and is very often used on microscopes from other makers, among them Carl Zeiss Jena and Olympus (especially Olympus CH). With a suitable build-up ring fitted (3D printed, for example), this condenser is commonly used in microscopes with a 39,5 mm condenser seat as well. The instructions for setting up LOMO KF-5 phase contrast can be found here: https://scopica.ru/proj/ustroystvo-dlya-nablyudeniya-metodom-fazovogo-kontrasta-kf-5/

This is a so-called short barrel objective, with a parfocal length of 33 mm. It is very commonly mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives of 45 mm length. Professional adapters with protective optics, metal adapters and the popular 3D printed DIY solutions all work here.

LOMO objectives are very popular with owners of microscopes from other makers. Because of the historical links, owners of Carl Zeiss Jena microscopes treat them as an obvious substitute for those German objectives.

This objective fits practically any microscope from any maker, provided it has an RMS thread and accepts objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if a suitable adapter is used). A few such microscopes are listed in the "compatibility" section, but that is not a complete list.

Description of this part for the microscope.

objective:
Manufacturer: Zeiss West Germany
Engraving on the objective: Planapo 63/1,4 Oel 160/-
Manufacturer catalogue number: 46 18 40 - 9901 (also written as 461840-9901)
Magnification: 63x
Numerical aperture (N.A.): 1.4
Optical correction: plan-apochromatic
Immersion: yes, oil
Coverslip: according to the engraving on the barrel of this objective, it can be used both without a coverslip and with a standard coverslip of 0.17 mm thickness
Tube length: 160 mm
Parfocal distance: 45 mm
Thread: RMS
Specimen protection: yes, the objective has a spring-loaded mechanism preventing the slide with the specimen from being broken
Phase contrast: no - the objective has no phase rings inside
DIC: prisms allowing work in DIC mode are available on the market for this objective (sold separately)

This objective fits practically any microscope of any manufacturer, provided it has an RMS thread and accepts objectives for a 160 mm tube length with a parfocal distance of 33, 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Germany
Designation: Ph2 F40/0,65 160/0,17
Manufacturer catalogue number: 46 07 06
Magnification: 40x
Correction: Semi-planachromatic
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Parfocal length: 45 mm
Cover glass: yes, 0.17 mm thick
Immersion: no (a so-called dry objective)
Thread: RMS
Phase contrast: yes, the objective has an internal phase ring matching the Ph2 position in the condenser
Specimen protection: yes, the objective has a spring-loaded mechanism that protects the slide from being crushed

The letter "F" at the beginning of the objective model name (F 40 / 0.65) means that this is a semi-planachromatic objective, i.e. flatter than an achromat but less flat than a planachromat. "F" does not mean that the objective is intended for work with fluorescence light.

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and accepts 160 mm tube length objectives with a parfocal length of 33, 37 or 45 mm. A few example microscopes are listed in the "compatibility" section, but that list is not complete.

Description of this part for the microscope.

10x
Mounting diameter: 23.2 mm

Because this is important, I will write it again: this is a single eyepiece, not a pair of eyepieces.

This is a solution for people who:
- either have a pair of these eyepieces, but one of them needs to be replaced
- or have a microscope with a monocular head

For Will Wetzlar microscopes, eyepieces from practically any manufacturer can be used, provided that they are designed for a finite tube length system and have a mounting diameter of 23.2 mm. However, many users appreciate having original parts.

This eyepiece also works the other way around - it fits almost any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Users of microscopes from many manufacturers are happy to choose German eyepieces because of their high quality. I have included some examples in the "compatibility" section, but this is definitely not a complete list.

Microscope users have several names for eyepieces of this type with a large field of view. Among others:
- wide field eyepiece
- widefield ocular
- WF eyepiece
- wide angle eyepiece
- large field of view eyepiece

Description of this part for the microscope.

catalogue number: 46 78 36 (also written as 467836)
Colour: blue matt
Diameter: 32 mm
Material: glass

This is a filter that combines the functions of a blue filter and a ground glass diffuser:
- the blue filter is used to convert the yellow, warm light of the bulb into light closer to white light
- the matt filter (called a diffuser or ground glass) is used to even out the light across the whole area of the specimen and to remove the visible filament of the bulb

This does, however, have one consequence: without a visible filament it is not possible to work with illumination set up according to the Koehler method - and Zeiss mentions this in the leaflet supplied with the filter.

Very often only one or two microscope filters can be fitted in a microscope, for example one on the illuminator and the second in the holder below the condenser. The fact that the glass filter offered here is a 2-in-1 solution makes it possible to save the possible second slot for another filter.

The diameter of 32 mm is a standard with many manufacturers, which means this filter can be used with microscopes of numerous brands. The "compatibility" section lists over a dozen such microscopes, but it is not a complete list.

Description of this part for the microscope.

Jena microscopes over nearly 100 years. They differ in the appearance of the barrel and in the engraving.

Appearance of this variant of the Carl Zeiss Jena 8x objective:
- black section next to the thread
- silver upper section
- the marking "8/0,20 160/-" on one side of the silver part of the barrel
- the Carl Zeiss Jena logo and the serial number on the other side of the silver barrel

Here (https://www.microscopeparts.eu/part/99852) you will see the same Carl Zeiss Jena 8x objective, but in a slightly older variant (without the value "160/-" engraved on the barrel).

The Carl Zeiss Jena 8x objective is often used for macro photography - both on a microscope and on a camera (with an RMS adapter or a bellows unit). Although it is an achromatic objective, it renders fine detail very well and works nicely for focus stacking. It is a good complement to a set together with the Carl Zeiss Jena Semiplan 3.2x, LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x objectives.

Basic parameters of this objective:
Manufacturer: Carl Zeiss Jena
Magnification: 8x
Correction: achromatic
Marking on the objective: 8/0,20 160/-
Numerical aperture N.A.: 0.20
Serial number: above 580 000
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: either way - objectives with such a low magnification can work both with and without a cover glass
Immersion: no (a so-called dry objective)
Thread: RMS

Important - this objective is suitable for taking pictures with the "direct-projection" technique, because it does not require plan-compensating optics.

A microscope objective with such a low magnification (keeping the 160 mm tube we get an 8:1 reproduction ratio) is used for observation or macro photography of, among other things:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells

Why do I describe the appearance of this variant so precisely in the description of this objective? Some users care about completing their Carl Zeiss Jena microscope with parts from the same series and roughly from the same period. The exact way the parameters are written on the barrel makes it possible to compare this objective not only from the photos in the gallery, but also at the level of the text description - especially for AI systems.

This is a so-called "short barrel objective", with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which makes it possible to use it in microscopes that require objectives with a parfocal length of 45 mm. Professional adapters with corrective optics work well here, as do plain metal adapters and the popular DIY parts from a 3D printer.

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and supports objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if we use a suitable adapter). A few examples of such microscopes are listed in the "compatibility" section, but that is not a complete list.

Carl Zeiss Jena objectives are very popular among users of microscopes from other manufacturers. Because of the historical connections, owners of LOMO microscopes treat them as an obvious replacement for their own Soviet optics.

After the Second World War the Carl Zeiss Jena production plant ended up in the Soviet occupation zone, and the Russians began copying the German technical documentation - see for yourself that the LOMO 8x objectives are an exact copy of the objective presented here: https://www.microscopeparts.eu/?search_2=8x&search_7=ob&search_8=lomo. The objectives made for school microscopes such as the Opta Junat are also a clone of Carl Zeiss Jena optics: https://www.microscopeparts.eu/part/00639.

Description of this part for the microscope.

Jena microscopes over nearly 100 years. They differ in the appearance of the barrel and in the engraving.

Appearance of this variant of the Carl Zeiss Jena 8x objective:
- black section next to the thread
- silver upper section
- the digit "8" on the first line and "0,20" on the second line, on one side of the silver part of the barrel
- the Carl Zeiss Jena logo and the serial number on the other side of the silver barrel

Here (https://www.microscopeparts.eu/part/99851) you will see the same Carl Zeiss Jena 8x objective, but in a slightly newer variant (with the value "160/-" engraved on the barrel).

The Carl Zeiss Jena 8x objective is often used for macro photography - both on a microscope and on a camera (with an RMS adapter or a bellows unit). Although it is an achromatic objective, it renders fine detail very well and works nicely for focus stacking. It is a good complement to a set together with the Carl Zeiss Jena Semiplan 3.2x, LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x objectives.

Basic parameters of this objective:
Manufacturer: Carl Zeiss Jena
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0,20
Numerical aperture N.A.: 0.20
Serial number: 503 729
Tube length: 160 mm
Parfocal length: 33 mm - a so-called short barrel objective
Cover glass: either way - objectives with such a low magnification can work both with and without a cover glass
Immersion: no (a so-called dry objective)
Thread: RMS

Important - this objective is suitable for taking pictures with the "direct-projection" technique, because it does not require plan-compensating optics.

A microscope objective with such a low magnification (keeping the 160 mm tube we get an 8:1 reproduction ratio) is used for observation or macro photography of, among other things:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells

Why do I describe the appearance of this variant so precisely in the description of this objective? Some users care about completing their Carl Zeiss Jena microscope with parts from the same series and roughly from the same period. The exact way the parameters are written on the barrel makes it possible to compare this objective not only from the photos in the gallery, but also at the level of the text description - especially for AI systems.

This is a so-called "short barrel objective", with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which makes it possible to use it in microscopes that require objectives with a parfocal length of 45 mm. Professional adapters with corrective optics work well here, as do plain metal adapters and the popular DIY parts from a 3D printer.

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and supports objectives with TL=160 mm and a parfocal length of 33 mm (or 37 / 45 mm if we use a suitable adapter). A few examples of such microscopes are listed in the "compatibility" section, but that is not a complete list.

Carl Zeiss Jena objectives are very popular among users of microscopes from other manufacturers. Because of the historical connections, owners of LOMO microscopes treat them as an obvious replacement for their own Soviet optics.

After the Second World War the Carl Zeiss Jena production plant ended up in the Soviet occupation zone, and the Russians began copying the German technical documentation - see for yourself that the LOMO 8x objectives are an exact copy of the objective presented here: https://www.microscopeparts.eu/?search_2=8x&search_7=ob&search_8=lomo. The objectives made for school microscopes such as the Opta Junat are also a clone of Carl Zeiss Jena optics: https://www.microscopeparts.eu/part/00639.

Description of this part for the microscope.

repairing the eyepiece.

Lens position: this is the topmost lens of the microscope eyepiece, called the eye lens
Lens construction: this is a cemented lens, flat on one side and convex on the other
Matching eyepiece: this is the lens from the Zeiss West Germany CPL W 10x/18 eyepiece, model number 464022-9901

This lens is not a replacement part for the microscope. It is a part for repairing a microscope eyepiece - and that eyepiece can be used in various microscopes, even from manufacturers other than Carl Zeiss. A few microscopes this eyepiece can be used with are listed in the "compatibility" section, but this is definitely not a complete list. It is safe to assume that the Zeiss CPL W 10x/18 eyepiece can be used with any microscope from any manufacturer whose head has a 23.2 mm eyepiece tube diameter.

Description of this part for the microscope.

the body only, without optics.

What is included: three parts - the lower sleeve that goes into the eyepiece tube of the head, the retaining ring that holds the lenses inside the housing, and the upper sleeve with the engraving
Material: all parts of the housing are made of plastic - this is unusual, because in eyepieces of this class the bodies are normally metal
Marking on the body: ZEISS West Germany CPL W 10x/18, number 464022-9901
Mounting diameter: 23.2mm - a standard eyepiece tube

This housing is not a replacement part for the microscope. It is a part for repairing a microscope eyepiece - and that eyepiece can be used in various microscopes, even from manufacturers other than Carl Zeiss. A few microscopes this eyepiece can be used with are listed in the "compatibility" section, but this is definitely not a complete list. It is safe to assume that the Zeiss CPL W 10x/18 eyepiece can be used with any microscope from any manufacturer whose head has a 23.2 mm eyepiece tube diameter.

The plastic this eyepiece housing is made of can be damaged in various ways. It often cracks, gets scratched, or deforms and partly melts from heat - the proximity of a bulb, a lamp or a soldering iron is enough, and very often the culprit is simply the cigarette held in the same hand that turns the focus knobs. In that case - especially when the optics inside are still intact - you can simply replace the housing with the one offered here.

Here you will find the top lens for this eyepiece: https://www.microscopeparts.eu/part/99913.

Description of this part for the microscope.

called thick objectives
Thread in the cap: no, the cap of this case has no RMS thread for screwing the objective in

Various names are used on the secondary market for a microscope objective case, including:
- objective case
- microscope objective case
- objective container
- microscope objective container
- objective storage case
- objective storage container
- objective box
- objective storage box
- protective objective case
- objective lens case
- objective lens container
- dust protection case
- transport case for microscope objectives
- microscope objective holder case
- storage canister for microscope objectives

This case is of most value to users and collectors who own LOMO objectives, but you can of course keep objectives from any manufacturer in it, for example Carl Zeiss Jena.