Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Nf
- Ng
- Lg
- Lr
- Lu
- Lumipan

and
- Lomo Biolam
- Bresser Biolam
- Lomo MBB-1A
- and some IOR Bucuresti

have interchangeable objective turrets. This is an excellent solution for storing, using, and quickly replacing entire sets of objectives. For example, you can have separate turrets already equipped with a complete set of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Therefore, having only one microscope we can use it for different purposes and not screw in and unscrew all the lenses manually each time.

Description of this part for the microscope.

removing the filter.

Compatible with:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival (and its variants)
- Carl Zeiss Jena Docuval

Description of this part for the microscope.

removing the filter.

Compatible with:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival (and its variants)
- Carl Zeiss Jena Docuval

Description of this part for the microscope.

This is a component of the transmitted light optical path - it is not a diaphragm for EPI reflected light.

This part fits various Carl Zeiss Jena microscope models built on the Amplival stand:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

Description of this part for the microscope.

a CZJ Ergaval / Amplival microscope with a classic illuminator (6V 15W filament bulb) and simply replacing the bulb holder with the one offered here will create a halogen-illuminated microscope. No.
- the original holder of the "regular" bulb contains a lens that collimates the light beam
- the halogen bulb holder does not contain that lens
- Ergaval / Amplival microscopes designed for halogen illumination have an additional lens threaded into the base

Halogen illumination is (according to many experts) the best microscope illumination because it delivers strong light with a full spectrum, whereas LED often provides only a portion of the color spectrum.

Other used names:
- illuminator
- halogen lamp
- bulb holder
- lamp housing

Description of this part for the microscope.

an incandescent lamp illuminator. This lampholder is not required if you have a microscope with the original halogen illuminator - in that case, the collimator lens is a separate element mounted next to the field diaphragm.

Other used names:
- lamp holder
- lamp tube
- lamp support
- sometimes the German-language term "Lampenhaus" is used

Description of this part for the microscope.

This diaphragm is necessary to set illumination according to the Koehler system.

This element is used in a diaphragm installed in various Carl Zeiss Jena microscope models built on the Amplival stand:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

The field diaphragm located in the microscope base is part of the transmitted light path - it is not a diaphragm for EPI (reflected) illumination. However, it is VERY LIKELY that individual blades may also fit reflected light diaphragms and other diaphragms (e.g. aperture diaphragms) in Carl Zeiss Jena microscopes and condensers.

Damage to iris diaphragm blades is one of the more common failures in Carl Zeiss Jena microscopes. Most often this occurs when:
- the lubricant in the diaphragm opening / closing mechanism dries out and the user tries to move it by force
- a foreign object gets between the blades (e.g. a glass fragment from a chipped microscope slide)
- the diaphragm is closed too quickly or opened too far

In the event of an iris diaphragm failure, it is possible to:
- replace the entire element (condenser or diaphragm module)
- replace only the diaphragm
- repair the diaphragm by replacing the damaged blades

Description of this part for the microscope.

the microscope arm
- and a mounting screw

The mounting screw itself - as a separate component - fits practically most Carl Zeiss Jena microscopes based on the Amplival system:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

Carl Zeiss Jena developed a complete modular microscope system based on connections made with this type of screw. Thanks to this design, the screw as a service part is also compatible with most accessories, modules and components that can be mounted to the microscope, including:
- EPI arms
- Parktaric Zoom Tube module
- Interphako heads

Important - carefully check the shape and dimensions of the screw to make sure it is the size you need. For example, the modular design of the Carl Zeiss Jena Jenamed microscope is based on mounting screws of a different shape and size (search for it in this database for comparison).

Description of this part for the microscope.

probably fits most Carl Zeiss Jena microscope stages models

In the photo gallery there are detailed photos of this element together with the dimensions. Thanks to this it is possible to identify exactly which part of the microscope stage it is.

Description of this part for the microscope.

Amplival microscope.

Does not fit the black pancratic condenser used in the Carl Zeiss Jena Carl Zeiss Jena Lumpian / Nf / Nu microscopes.

In the photo gallery detailed photos of this element together with the dimensions are available. Additionally, in the last photo an arrow indicates which element it is and where it is located in the condenser in order to clearly identify this part.

Description of this part for the microscope.

Amplival microscope.

Does not fit the black pancratic condenser used in the Carl Zeiss Jena Carl Zeiss Jena Lumpian / Nf / Nu microscopes.

In the photo gallery detailed photos of this element together with the dimensions are available. Additionally, in the last photo an arrow indicates which element it is and where it is located in the condenser in order to clearly identify this part.

Description of this part for the microscope.

Does not fit the black pancratic condenser used in the Carl Zeiss Jena Carl Zeiss Jena Lumpian / Nf / Nu microscopes.

In the photo gallery detailed photos of this element together with the dimensions are available. Additionally, in the last photo an arrow indicates which element it is and where it is located in the condenser in order to clearly identify this part.

Description of this part for the microscope.

Zeiss Jena produced two very similar microscope stage models - one with a long manipulator (used, for example, in Amplival microscopes) and the other with a short manipulator (used, for example, in Ergaval microscopes). This element fits the models with the long manipulator (long handle).

In the photo gallery there are detailed photos of this element together with the dimensions. Thanks to this it is possible to identify exactly which part of the microscope stage it is.

Description of this part for the microscope.

rotating the condenser, and for the condenser stopping in the correct position. This part is a plate that fits into the appropriate recess (detent).

Fits pancratic condensers used in the Carl Zeiss Jena Amplival microscopes.

Does not fit the black pancratic condenser used in the Carl Zeiss Jena Lumipan / Nf / Nu microscope.

In the photo gallery detailed photos of this element together with the dimensions are available. Additionally, in the last photo an arrow indicates which element it is and where it is located in the condenser in order to clearly identify this part.

Description of this part for the microscope.

Zeiss Jena produced two very similar microscope stage models - one with a long manipulator (used, for example, in Amplival microscopes) and the other with a short manipulator (used, for example, in Ergaval microscopes). This element fits the models with the long manipulator (long handle).

In the photo gallery there are detailed photos of this element together with the dimensions. Thanks to this it is possible to identify exactly which part of the microscope stage it is.

Description of this part for the microscope.

fit the black pancratic condenser used in the Carl Zeiss Jena Carl Zeiss Jena Lumpian / Nf / Nu microscopes.

In the photo gallery detailed photos of this element together with the dimensions are available. Additionally, in the last photo an arrow indicates which element it is and where it is located in the condenser in order to clearly identify this part.

Description of this part for the microscope.

Zeiss Jena produced two very similar microscope stage models - one with a long manipulator (used, for example, in Amplival microscopes) and the other with a short manipulator (used, for example, in Ergaval microscopes). This element fits the models with the long manipulator (long handle).

In the photo gallery there are detailed photos of this element together with the dimensions. Thanks to this it is possible to identify exactly which part of the microscope stage it is.

Description of this part for the microscope.

The Carl Zeiss Jena Amplival microscope has a modular design and by replacing individual elements it can be converted into other versions based on this platform, e.g. Amplival-Pol, Epival or Vertival.
After replacing the arm from a transmitted light version to one designed for reflected light, it is also necessary to supply light into the arm. This adapter is used for that purpose.

Description of this part for the microscope.

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Carl Zeiss Jena
Magnification: 7x
Image: micrometer
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Description of this part for the microscope.

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Carl Zeiss Jena
Magnification: 7x
Image: none
Mounting diameter: 23.2 mm

There is no measuring scale glass inside the eyepiece. Any 19mm diameter glass can be inserted inside, for example, with a crosshair, micrometer, or reticle.

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Description of this part for the microscope.

10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Carl Zeiss Jena Amplival
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval
- Carl Zeiss Jena Fluoval

On a mechanical microscope stage there are two such clamps, between which a microscope slide with a specimen is placed. These clamps - right and left are not identical. Here I present and offer the left clamp, which does have a spring.

Note - different stage models use different clamps. In the photo gallery there are detailed photos of this element along with dimensions. In the last photo, the stage to which this clamp fits is shown. Additionally, an arrow indicates where this element is located, so it is clear which part of the microscope stage is being referred to.

Description of this part for the microscope.

microscopes:
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval
- Carl Zeiss Jena Fluoval

On a mechanical microscope stage there are two such clamps, between which a microscope slide with a specimen is placed. These clamps - right and left are not identical. Here I present and offer the right clamp, which does have a spring.

Note - different stage models use different clamps. In the photo gallery there are detailed photos of this element along with dimensions. In the last photo, the stage to which this clamp fits is shown. Additionally, an arrow indicates where this element is located, so it is clear which part of the microscope stage is being referred to.

Description of this part for the microscope.

Carl Zeiss Jena Amplival
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval
- Carl Zeiss Jena Fluoval

On a mechanical microscope stage there are two such clamps, between which a microscope slide with a specimen is placed. These clamps - right and left are not identical. Here I present and offer the left clamp, simple, which does NOT have a spring.

Note - different stage models use different clamps. In the photo gallery there are detailed photos of this element along with dimensions. In the last photo, the stage to which this clamp fits is shown. Additionally, an arrow indicates where this element is located, so it is clear which part of the microscope stage is being referred to.

Description of this part for the microscope.

for taking microscope photographs or recording microscope videos. This is a gray photographic adapter.

Basic technical parameters:
- mounting connection to microscope stand: 41 mm dovetail
- output connection type on the photo port: 49 mm internal thread
- connection for binocular head mounting: Jena standard 41 mm dovetail
- magnification directed to the binocular head: 1.6x
- magnification on the photo output: none (that is 1.0x)

Because this photo head has a 49 mm threaded output, virtually any device, camera, adapter, tube or other accessory can be connected after using an appropriate 49 mm thread adapter. Direct projection technique may be used (because there is no additional optics inside), or any projection eyepieces may be installed in the optical path.

This photographic attachment is intended mainly (but not exclusively) for the following microscope models:
- Carl Zeiss Jena Eduval
- Carl Zeiss Jena Laboval
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Telaval
- Carl Zeiss Jena Pictoval
- Carl Zeiss Jena Epignost

The list above contains Mikroval series microscopes with gray housings - just like the tube shown and offered here. However, it also works with older black Carl Zeiss Jena microscopes:
- Carl Zeiss Jena L-Stativ (models Lg, Lu and Lr)
- Carl Zeiss Jena Lumipan
- Carl Zeiss Jena Ng
- Carl Zeiss Jena Nf (and NfPk)

Please note that microscopes from other manufacturers also use the 41 / 41.5 mm dovetail connection standard. Because of this, this photographic head can also be used with microscopes made by:
- Lomo (for example Lomo Biolam)
- Meopta
- IOR
- selected Reichert microscopes (for example Reichert Neozet)
- Will Wetzlar
- Hund Wetzlar
- Leitz Wetzlar

This Carl Zeiss Jena tube is also very often used with microscopes having a larger head mounting diameter. In such cases users apply additional spacer or thickening rings. Because of this, this photo adapter also fits microscopes from manufacturers such as:
- PZO (for example the PZO Biolar model with 43 mm connection)
- Olympus (for example the Olympus CH model with 42 mm connection)

The element that allows a photographic camera or imaging camera to be connected to Carl Zeiss Jena Mikroval series microscopes may be referred to by different names. Commonly used names include:
- trino head
- trinocular head
- photo head
- photographic head
- photo attachment
- photographic attachment
- photo adapter
- photographic adapter
- photo tube
- photographic tube
- phototube
- photographic angle tube
- and various combinations of the words head, attachment, adapter or tube with terms such as photo, photographic, for camera and similar

Description of this part for the microscope.

related models.

This element is used when the microscope does not have a transmitted light illuminator with a lamp holder installed in the rear part of the base. In such a case, so that there is no open hole and no contamination can enter the inside of the microscope, this opening can be closed with this blanking plug.
When can such a situation occur that the microscope does not have a transmitted light illuminator? Most often when the microscope is intended for reflected light work only and simply does not have any DIA illuminator (transmitted light illuminator).

This element fits the following microscopes:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Interphako
- Carl Zeiss Jena Fluoval

The photo gallery contains detailed photos of this element from different sides, while the video (in the video gallery) shows exactly how this blanking plug is used and where it is mounted.

Description of this part for the microscope.

and related models.

This element is used when transmitted light is temporarily not needed. The illuminator itself does not need to be removed - instead, the light output should simply be completely blocked, and this light output is the collector lens itself. This collector lens is located inside the microscope base, above the angle mirror and below the condenser.

When can there be a need to completely block transmitted light? Most often when:
- a microscope with DIA illumination (transmitted light) and EPI illumination (reflected light) is available, but temporarily only reflected light operation is needed
- a microscope previously working with transmitted light (for example Carl Zeiss Jena Amplival) is being converted into a microscope intended to work permanently only with reflected light (for example converting an Amplival into a Vertival)
- for example a Fluoval microscope is used and it is undesirable that "the lower light is visible"

This element fits the following microscopes:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Interphako
- Carl Zeiss Jena Fluoval
- Carl Zeiss Jena Docuval

The photo gallery contains detailed photos of this element from different sides, while the video (in the video gallery) shows exactly how this blanking plug is used and where it is mounted.

Description of this part for the microscope.

and the nosepiece is mounted from underneath.

Based on the Carl Zeiss Jena Amplival microscope, whose modular design allows for various configurations, several microscope models were created:
- Vertival
- Epival
- Amplival Interphako
- Amplival Pol
- Fluoval
and these microscopes differ from each other, among other things, by different arms. The arm from the Amplival model has the simplest construction.

By owning different arms and one microscope - you can swap them according to your needs and use different functionalities, as if you had two microscope models.

This element consists of the following components:
- fixing screw securing the arm to the microscope body
- holder enabling the mounting of components with a 41 mm mounting diameter (e.g. binocular head)
- fixing screw securing this component (e.g. head). This element is very often damaged.
- guides (slides) enabling the attachment of an interchangeable nosepiece

A device with a matching mounting diameter that is placed on the arm from above can be, for example:
- head with a built-in inclined tube
- intermediate tube (German: Zwischentubus)
- magnification changer (Optovar)
- EPI reflected light illuminator
- polarization analyzer module
- and others, because as mentioned above, the Amplival class microscopes have a modular design and there are many accessories available for them

This microscope arm can solve the following issues related to Carl Zeiss Jena Amplival class microscopes:
- if your microscope is missing this element, which happens with microscopes available on the secondary market
- if you own another variant of a microscope from this class, e.g. Carl Zeiss Jena Vertival, and you want to convert it into a "regular" Amplival
- if you own such an arm, but it is of poor quality or has damaged individual components
- if you need one of the component parts of this arm
- if you are building your own DIY project and need a mount compatible with the Carl Zeiss Jena standard

On the last photo, an arrow indicates which element it is and where it is located in the microscope to clearly identify this part.

Important: The popular and visually very similar Carl Zeiss Jena Ergaval microscope, which is often confused with the Amplival model, DOES NOT HAVE such a modular design and this arm does not fit it.

If you need any of the component parts of this arm (e.g. the large fixing screw securing the arm to the microscope stand or the smaller fixing screw securing the head to the arm - search this database or contact us by writing an email.

Description of this part for the microscope.

Amplival microscope
Number of lenses: 3
Numerical aperture N.A.: variable, from N.A. 0.16 to N.A. 1.4
Aperture diaphragm: yes, screwed on as a detachable module

The Carl Zeiss Jena pancratic condenser has three upper lenses:
- for working with low magnification objectives (usually up to 6.3x)
- Apl. 1.4 for working with high magnification objectives
- an oil immersion cardioid darkfield lens with N.A. = 1.05

Mechanically, this condenser is mounted on dovetail rails located on the microscope stage holder block.

Here are the mounting possibilities of the pancratic condenser to Carl Zeiss Jena microscopes:
- to Amplival, Docuval, Epival, Fluoval, Vertival microscopes, this condenser can be mounted directly
- to Ergaval, Nu, Nu 2, Nf microscopes, this condenser is mounted after unscrewing the aperture diaphragm from it
- to Jenaval, Jenapol, Jenalumar microscopes, this condenser can also be mounted, but it is installed together with the entire stage holder block from the Amplival microscope http://www.microscopy-uk.org.uk/mag/artfeb09/rs-jenalumar.html
- be careful, because the Lumipan microscope also features a pancratic condenser, but with a completely different mounting method

This condenser is often used as a "parts donor" for own DIY projects, for example:
- the Apl. 1.4 lens is often used to modify (upgrade) condensers with a lower numerical aperture N.A. in various microscopes
- the darkfield lens is very often used to build a standalone cardioid condenser
- the iris diaphragm has a very wide range of applications

On the last photo, an arrow indicates which element it is and where it is located in the microscope to clearly identify this part. Additionally, the attached video shows how the individual elements of this condenser move.

Description of this part for the microscope.

Jena
Version: grey version, removed from a Carl Zeiss Jena Amplival microscope
Mounting method: aperture diaphragm in the form of a detachable module
Centerable: yes

This iris diaphragm module is mechanically mounted to the bottom of the panchromatic condenser.

In Carl Zeiss Jena panchromatic condensers, the diaphragm is designed as a detachable module because it can be removed and replaced, for example, with a phase contrast module or a polarization module. Precisely because this microscope part can be detached, it is often missing from condensers available on the secondary market - over the years it simply gets lost.

Interestingly, this microscope part is very often modified. When users do not have a phase contrast module or a polarization module, they frequently insert polarizing film or custom-made phase rings into the aperture diaphragm module and obtain the functionality they need through DIY modifications.

This module can also solve a common problem found in Carl Zeiss Jena Amplival microscopes, namely damaged diaphragm blades in the condenser.