Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
1 - Thumbnail photo showing this microscope part. Hertel & Reuss Microscope condenser, mount diam. 31,5 mm., incl. iris diaphragm and holder for 32 mm filters. Unscrewable top lens. - thumbnail [ 00432 ]	SERMIK_ID number under which this microscope part is placed in the database. 00432	Hertel & Reuss microscope condenser 31,5 mm.	The name of this microscope part. Microscope condenser, mount diam. 31,5 mm., incl. iris diaphragm and holder for 32 mm filters. Unscrewable top lens.	Description of this part for the microscope. It contains a screw used to set the position (height) of the condenser in the holder. It can be unscrewed and then it will fit any holder with a diameter of 31. ... 5 mm or others if you put a thickening ring on it. The upper lens for strong magnifications can be unscrewed and then we get a condenser for objectives with low magnification and low numerical aperture. I can't (or it is not possible) unscrew the lower part with the diaphragm separately. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio C microscope repair parts microscope condenser mikroskop kondensor Mikroskopkondensor abbe iris diaphragm Blende Irisblende przysłona irysowa Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Condensers	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Praktycznie każdy z TL = finite	A list of potential uses for this part and when it might be needed. For anyone whose microscope lacks a condenser. Can be used with any microscope that uses 31.5 mm diameter condensers. The upper lens sometimes gets damaged in condensers. This may be the reason for replacing the entire element. Check if such a smaller part is available for sale as a separate product. Very (!) often the iris diaphragm in the condenser breaks. The leaves break, bend or get lost. This may be the reason for replacing the entire element. Check if such a smaller part is available for sale as a separate product.	0000-00-00 00:00:00
18 - Thumbnail photo showing this microscope part. Hertel & Reuss 10x - 10:1 N.A.0,30 microscope objective - thumbnail [ 00453 ]	SERMIK_ID number under which this microscope part is placed in the database. 00453	10:1 N.A.0,30 10x RMS microscope objective	The name of this microscope part. Hertel & Reuss 10x - 10:1 N.A.0,30 microscope objective	Description of this part for the microscope. Microscope objective. Manufacturer: Hertel & Reuss Magnification: 10x Numerical aperture: 0.30 Cover glass: no Thread: RMS Tubus length: 170 ... mm Focal length: 37 mm Immersion: no (dry, air) Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio C microscope repair parts Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 9 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Primus Praktycznie każdy z TL = 170 mm SM	A list of potential uses for this part and when it might be needed. if your microscope lacks a 10x objective if you have a 10x objective damaged or in poor condition if you want to start in super-macro photo stacking if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	0000-00-00 00:00:00
30 - Thumbnail photo showing this microscope part. Hertel & Reuss 20x - 20:1 N.A.0,50 microscope objective - thumbnail [ 00463 ]	SERMIK_ID number under which this microscope part is placed in the database. 00463	20:1 N.A.0,50 20x RMS microscope objective	The name of this microscope part. Hertel & Reuss 20x - 20:1 N.A.0,50 microscope objective	Description of this part for the microscope. Microscope objective. Manufacturer: Hertel & Reuss Magnification: 20x Numerical aperture: 0.50 Cover glass: yes, 0.17 mm Thread: RMS Tubus length: 170 ... mm Focal length: 37 mm Immersion: no (dry, air) Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio C microscope repair parts Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Primus Praktycznie każdy z TL = 170 mm SM	A list of potential uses for this part and when it might be needed. This is a very rare lens if your microscope is missing a 20x lens if you have a 20x lens that is damaged or in poor condition if you have a microscope from any manufacturer that supports TL=170 FL=37 lenses, this is also a lens for you	0000-00-00 00:00:00
59 - Thumbnail photo showing this microscope part. Leitz Wetzlar 3.5x / 0.10 170/- RMS Microscope objective. - thumbnail [ 00514 ]	SERMIK_ID number under which this microscope part is placed in the database. 00514	Leitz Wetzlar 3,5x 170/- RMS microscope objective (Leica)	The name of this microscope part. Leitz Wetzlar 3.5x / 0.10 170/- RMS Microscope objective.	Description of this part for the microscope. Perfect exterior and optics. Finding a lens in this condition on the used market is difficult. Manufacturer: Leitz Wetzlar Magnification: 3.5x Color ... correction: achromat Numerical aperture: 0.10 Tube length: 170 mm Focal length: 37 mm Cover glass: no Immersion: no Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Leitz SM microscope repair parts Microscope objective Mikroskop Objektiv obiektyw mikroskopowy Leitz Leica Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	0000-00-00 00:00:00
60 - Thumbnail photo showing this microscope part. Leitz Wetzlar 10x / 0,25 170/- RMS microscope objective. - thumbnail [ 00513 ]	SERMIK_ID number under which this microscope part is placed in the database. 00513	Leitz Wetzlar 10x 170/- RMS microscope objective (Leica)	The name of this microscope part. Leitz Wetzlar 10x / 0,25 170/- RMS microscope objective.	Description of this part for the microscope. Perfect exterior and optics. Finding a lens in this condition on the used market is difficult. Manufacturer: Leitz Wetzlar Magnification: 10x Color ... correction: achromat Numerical aperture: 0.25 Tube length: 170 mm Focal length: 37 mm Cover glass: no Immersion: no Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Leitz SM microscope repair parts Microscope objective Mikroskop Objektiv obiektyw mikroskopowy Leitz Leica Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	0000-00-00 00:00:00
62 - Thumbnail photo showing this microscope part. Leitz Wetzlar 40x / 0,65 170/0,17 RMS microscope objective - thumbnail [ 00512 ]	SERMIK_ID number under which this microscope part is placed in the database. 00512	Leitz Wetzlar 40x 170/0,17 RMS microscope objective (Leica)	The name of this microscope part. Leitz Wetzlar 40x / 0,65 170/0,17 RMS microscope objective	Description of this part for the microscope. Perfect exterior and optics. Finding a lens in this condition on the used market is difficult. Manufacturer: Leitz Wetzlar Magnification: 40x Color ... correction: achromat Numerical aperture: 0.65 Tube length: 170 mm Focal length: 37 mm Cover glass: 0,17 mm Immersion: no Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Leitz SM microscope repair parts Microscope objective Mikroskop Objektiv obiektyw mikroskopowy Leitz Leica Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	0000-00-00 00:00:00
79 - Thumbnail photo showing this microscope part. Leitz Wetzlar 10:1 A 0.25 170/- RMS microscope objective 10x vintage. - thumbnail [ 00519 ]	SERMIK_ID number under which this microscope part is placed in the database. 00519	Leitz Wetzlar 10:1 170/- RMS microscope objective 10x (Leica) Vintage	The name of this microscope part. Leitz Wetzlar 10:1 A 0.25 170/- RMS microscope objective 10x vintage.	Description of this part for the microscope. Perfect exterior and optics. Finding a lens in this condition on the used market is difficult. Manufacturer: Leitz Wetzlar Model: 170/- 10:1 A 0. ... 25 Magnification: 10x Color correction: achromat Numerical aperture: 0.25 Tube length: 170 mm Focal length: 37 mm Cover glass: no Immersion: no Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Leitz SM microscope repair parts Microscope objective Mikroskop Objektiv obiektyw mikroskopowy Leitz Leica Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	0000-00-00 00:00:00
92 - Thumbnail photo showing this microscope part. Hertel & Reuss 40x Microscope Objective - 40:1 N.A. 0.65 Met. for transmitted light NCG (without coverslip) or EPI reflected light - thumbnail [ 00542 ]	SERMIK_ID number under which this microscope part is placed in the database. 00542	Hertel Reuss 40:1 N.A. 0,65 Met. microscope objective metalurgical NCG EPI RMS	The name of this microscope part. Hertel & Reuss 40x Microscope Objective - 40:1 N.A. 0.65 Met. for transmitted light NCG (without coverslip) or EPI reflected light	Description of this part for the microscope. Perfect exterior and optics. It's not easy to find a lens in this condition on the used market. Manufacturer: Hertel & Reuss Kassel (West Germany) Model: 40:1 ... N.A. 0.65 Met Magnification: 40x Color correction: achromat Numerical aperture: 0.65 Tube length: 170 mm Focal length: 37 mm Thread: RMS Coverglass: no Immersion: no Info: metallographic objective Possible applications: - working with reflected light (EPI) - working with transmitted light without a coverglass Application areas: - metallography (surface structure) - mineralogy (minerals, micrometeorites) - quick viewing of smears (e.g., blood) - extreme macro photography Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-fl microscope repair parts Met. NCG No Cover Glass bez szkiełka nakrywkowego metalograficzny Metallografie metallography mineralogy Mineralogie geologia minerały micrometeorites mikroskop objektiv microscope objective obiektyw mikroskopowy EPI Auflicht Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-fl Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. If you don't have such a lens If your lens is damaged or in very poor condition If you need a lens with such a powerful magnification (40x) to work without a cover glass If you want to take extreme macro photos	0000-00-00 00:00:00
94 - Thumbnail photo showing this microscope part. Hertel & Reuss 10x Microscope Objective - 10:1 N.A. 0.30 Met. for transmitted light NCG (without coverslip) or EPI reflected light - thumbnail [ 00559 ]	SERMIK_ID number under which this microscope part is placed in the database. 00559	Hertel Reuss 10:1 N.A. 0,30 Met. microscope objective metalurgical NCG EPI RMS	The name of this microscope part. Hertel & Reuss 10x Microscope Objective - 10:1 N.A. 0.30 Met. for transmitted light NCG (without coverslip) or EPI reflected light	Description of this part for the microscope. Perfect exterior and optics. It's not easy to find a lens in this condition on the used market. Manufacturer: Hertel & Reuss Kassel (West Germany) Model: 10:1 ... N.A. 0.30 Met Magnification: 10x Color correction: achromat Numerical aperture: 0.30 Tube length: 170 mm Focal length: 37 mm Thread: RMS Coverglass: no Immersion: no Info: metallographic objective Possible applications: - working with reflected light (EPI) - working with transmitted light without a coverglass Application areas: - metallography (surface structure) - mineralogy (minerals, micrometeorites) - quick viewing of smears (e.g., blood) - extreme macro photography Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-fl microscope repair parts Met. NCG No Cover Glass bez szkiełka nakrywkowego metalograficzny Metallografie metallography mineralogy Mineralogie geologia minerały micrometeorites mikroskop objektiv microscope objective obiektyw mikroskopowy EPI Auflicht Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-fl Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. If you don't have such a lens If your lens is damaged or in very poor condition If you want to take super macro photos	0000-00-00 00:00:00
95 - Thumbnail photo showing this microscope part. Hertel & Reuss 40x Microscope Objective - 40:1 N.A. 0.65 PO. for transmitted light polarisation - thumbnail [ 00560 ]	SERMIK_ID number under which this microscope part is placed in the database. 00560	Hertel Reuss 40:1 N.A. 0,65 PO. microscope objective (Pol.) polarisation RMS	The name of this microscope part. Hertel & Reuss 40x Microscope Objective - 40:1 N.A. 0.65 PO. for transmitted light polarisation	Description of this part for the microscope. Perfect exterior and optics. It's not easy to find a lens in this condition on the used market. Manufacturer: Hertel & Reuss Kassel (West Germany) Model: 40:1 ... N.A. 0.65 PO. Magnification: 40x Color correction: achromat Numerical aperture: 0.65 Tube length: 170 mm Focal length: 37 mm Thread: RMS Coverglass: yes, 0,17 mm Immersion: no Info: polarisation objective Of course, the "PO" designation doesn't mean it's designed "solely" for polarizing. It can be used in any microscope for both polarization and brightfield transmitted light. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-fl microscope repair parts Pol Polaryzacja obiektyw mikroskopowy polaryzacyjny polarisation polarizing polarization Mikroskopobjektiv Mikroskop Objektiv Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-fl Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. If you don't have such a lens If your lens is damaged or in very poor condition If you need a lens with such a powerful magnification (40x) to work with polarisation	0000-00-00 00:00:00
136 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00587 ]	SERMIK_ID number under which this microscope part is placed in the database. 00587	Carl Zeiss Jena PK 8x (18) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. These eyepieces are in excellent optical condition and show no signs of wear. Manufacturer: Carl Zeiss Jena Magnification: 8x Field of view: 18 Mounting ... diameter: 23.2 mm Due to their very high quality, they are often used with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted. 8x eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 8x eyepieces provide the best image and optimal magnification. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts okulary plankompensacyjne plan compensation eyepieces Okulare microscope Mikroskop Planachromat objectives obiektywy plan planachromatyczne objektiv bino trino binokular głowica dwuoczna binocular head Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have a head with its own 1.5x or 1.6x magnification and need the appropriate eyepieces, 8x are the right ones if you have 8x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	0000-00-00 00:00:00
165 - Thumbnail photo showing this microscope part. Hertel & Reuss 5x microscope objective, vintage - thumbnail [ 00620 ]	SERMIK_ID number under which this microscope part is placed in the database. 00620	Hertel & Reuss 5x vintage microscope objective	The name of this microscope part. Hertel & Reuss 5x microscope objective, vintage	Description of this part for the microscope. Microscope objective for older microscopes (so-called antique, vintage). Manufacturer: Hertel & Reuss Magnification: 5x Thread: RMS Tubus length: 170 mm ... (?) Focal length: 37 mm The optics (lenses) in this microscope objective are in very good condition. There's no manufacturer's marking on the objective lens. Because lenses from different manufacturers looked very similar at the time, I'm not sure whether Hertel & Reuss manufactured the lenses themselves or ordered them from another company (e.g., Leitz). Therefore, these lenses can be safely used with microscopes from many other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Vintage Black microscope repair parts H&R Hertel & Reuss Humboldt Kosmos Stuttgart mikroskop objektiv microscope objective vintage antique obiektyw mikroskopowy Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Black Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Studio C Vintage Black	A list of potential uses for this part and when it might be needed. Primarily for people who want to complete their incomplete vintage microscope with period parts if your microscope lacks a 5x objective if you have a 5x objective damaged or in poor condition if you want to start in super-macro photo stacking if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	0000-00-00 00:00:00
166 - Thumbnail photo showing this microscope part. Hertel & Reuss 10x microscope objective, vintage - thumbnail [ 00619 ]	SERMIK_ID number under which this microscope part is placed in the database. 00619	Hertel & Reuss 10x vintage microscope objective	The name of this microscope part. Hertel & Reuss 10x microscope objective, vintage	Description of this part for the microscope. Microscope objective for older microscopes (so-called antique, vintage). Manufacturer: Hertel & Reuss Magnification: 10x Thread: RMS Tubus length: 170 mm ... (?) Focal length: 37 mm The optics (lenses) in this microscope objective are in very good condition. There's no manufacturer's marking on the objective lens. Because lenses from different manufacturers looked very similar at the time, I'm not sure whether Hertel & Reuss manufactured the lenses themselves or ordered them from another company (e.g., Leitz). Therefore, these lenses can be safely used with microscopes from many other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Vintage Black microscope repair parts H&R Hertel & Reuss Humboldt Kosmos Stuttgart mikroskop objektiv microscope objective vintage antique obiektyw mikroskopowy Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Black Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Studio C Vintage Black	A list of potential uses for this part and when it might be needed. Primarily for people who want to complete their incomplete vintage microscope with period parts if your microscope lacks a 10x objective if you have a 10x objective damaged or in poor condition if you want to start in super-macro photo stacking if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	0000-00-00 00:00:00
167 - Thumbnail photo showing this microscope part. Hertel & Reuss 50x microscope objective, vintage - thumbnail [ 00618 ]	SERMIK_ID number under which this microscope part is placed in the database. 00618	Hertel & Reuss 50x vintage microscope objective	The name of this microscope part. Hertel & Reuss 50x microscope objective, vintage	Description of this part for the microscope. Microscope objective for older microscopes (so-called antique, vintage). Manufacturer: Hertel & Reuss Magnification: 50x Thread: RMS Tubus length: 170 mm ... (?) Focal length: 37 mm The optics (lenses) in this microscope objective are in very good condition. There's no manufacturer's marking on the objective lens. Because lenses from different manufacturers looked very similar at the time, I'm not sure whether Hertel & Reuss manufactured the lenses themselves or ordered them from another company (e.g., Leitz). Therefore, these lenses can be safely used with microscopes from many other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Vintage Black microscope repair parts H&R Hertel & Reuss Humboldt Kosmos Stuttgart mikroskop objektiv microscope objective vintage antique obiektyw mikroskopowy 50x 60x 63x Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 45 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Black Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Studio C Vintage Black	A list of potential uses for this part and when it might be needed. Primarily for people who want to complete their incomplete vintage microscope with period parts if your microscope lacks a 50x objective if you have a 50x objective damaged or in poor condition if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	0000-00-00 00:00:00
168 - Thumbnail photo showing this microscope part. Hertel & Reuss 100x Oel immersion microscope objective, vintage - thumbnail [ 00617 ]	SERMIK_ID number under which this microscope part is placed in the database. 00617	Hertel & Reuss 100x Oel immersion vintage microscope objective	The name of this microscope part. Hertel & Reuss 100x Oel immersion microscope objective, vintage	Description of this part for the microscope. Microscope objective for older microscopes (so-called antique, vintage). Manufacturer: Hertel & Reuss Magnification: 100x Model: Oel immersion Thread: ... RMS Tubus length: 170 mm (?) Focal length: 37 mm Immersion: yes, oil The optics (lenses) in this microscope objective are in very good condition. There's no manufacturer's marking on the objective lens. Because lenses from different manufacturers looked very similar at the time, I'm not sure whether Hertel & Reuss manufactured the lenses themselves or ordered them from another company (e.g., Leitz). Therefore, these lenses can be safely used with microscopes from many other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Vintage Black microscope repair parts H&R Hertel & Reuss Humboldt Kosmos Stuttgart mikroskop objektiv microscope objective vintage antique obiektyw mikroskopowy Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Vintage Black Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Studio C Vintage Black	A list of potential uses for this part and when it might be needed. Primarily for people who want to complete their incomplete vintage microscope with period parts if your microscope lacks a 100x objective if you have a 100x objective damaged or in poor condition if you want to start in super-macro photo stacking if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	0000-00-00 00:00:00
208 - Thumbnail photo showing this microscope part. Hertel & Reuss HAPRO Halogen illuminator for Hertel & Reuss Labopan microscope (CN-hf, STE-6, Studio II) / Lamp housing, halogen illuminator, lamp, lighting - thumbnail [ 00662 ]	SERMIK_ID number under which this microscope part is placed in the database. 00662	Hertel & Reuss HAPRO Labopan microscope halogen illuminator, Lamphouse (CN-hf, STE-6, Studio II)	The name of this microscope part. HAPRO Halogen illuminator for Hertel & Reuss Labopan microscope (CN-hf, STE-6, Studio II) / Lamp housing, halogen illuminator, lamp, lighting	Description of this part for the microscope. An extremely rare accessory for a rare microscope. This illuminator was originally designed for a Hertel & Reuss Labopan microscope, but I need to verify whether ... it fits the CN series or the STE-6 stereo microscope (I'll post here once I find out). Modell: HAPRO Update: I just tested it with a Hertel & Reuss CN-hf / CN-fl microscope. The illuminator fits perfectly, but the CN-hf / CN-fl doesn't have a mirror underneath (Umlenkspiegel), so you'll need to install one yourself and it will work perfectly (see last photos). Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Labopan microscope repair parts Oświetlacz halogenowy Lampa halogenowa do mikroskopu Hertel & Reuss Labopan mikroskop microscope illuminator Beleuchter Beleuchtung Lamphouse Lampenhaus Halogenbeleuchter Lampe Beleuchtungseinheit Hertel & Reuss CN-hf Halogenbeleuchtung Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 89 €	Name of the category to which this microscope part is classified. Illuminators	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Labopan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Labopan STE-6 CN-fl CN-hf Studio II	A list of potential uses for this part and when it might be needed. if you are the proud owner of a Hertel & Reuss Labopan microscope, but it lacks an illuminator if you want to use this illuminator with another microscope	0000-00-00 00:00:00
328 - Thumbnail photo showing this microscope part. Hertel & Reuss Microscope - Simple Polarization Kit - thumbnail [ 00756 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00756	Hertel & Reuss Microscope - Simple Polarization Kit	The name of this microscope part. Hertel & Reuss Microscope - Simple Polarization Kit	Description of this part for the microscope. A simple polarization kit for monocular microscopes. This kit can be used with microscopes from any manufacturer. Manufacturer: Hertel & Reuss Name: simple ... polarization kit Intended for: monocular biological microscopes Type: for working with transmitted light This allows you to view objects in polarized transmitted light, which produces very beautiful effects, for example, when observing descaling agent, vitamin C, or sand. The kit includes: - a polarizer that attaches to the light source - an analyzer that attaches to the eyepiece NOTE: Make sure the eyepiece diameter is suitable for mounting the analyzer. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio C microscope repair parts polarisation polarization polaryzacja Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C Lg Eduval Studar Biolam Biolam D11 CN-fl Primus V200 V100 HM-LUX 3 Kolleg SH45	A list of potential uses for this part and when it might be needed. If you want to start your adventure with observations in polarized light on your microscope	2026-01-18 02:08:43
346 - Thumbnail photo showing this microscope part. Leitz Wetzlar Oel 100:1 170/0,17 A 1.30 RMS microscope objective 1/12 Vintage 100x - thumbnail [ 00774 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00774	Leitz Wetzlar Oel 100:1 170/0,17 A 1.30 RMS microscope objective 1/12 Vintage 100x	The name of this microscope part. Leitz Wetzlar Oel 100:1 170/0,17 A 1.30 RMS microscope objective 1/12 Vintage 100x	Description of this part for the microscope. Manufacturer: Leitz Wetzlar Model: 170/0.17 Oel 100:1 A 1.30 Manufacturer's Objective Number: 1/12 Magnification: 100x Color Correction: A ... chromat Numerical Aperture: 1.30 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: Yes, 0.17 mm Immersion: Yes, oil Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Leitz SM microscope repair parts Microscope objective Mikroskop Objektiv obiektyw mikroskopowy Leitz Leica Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	2026-01-20 00:00:00
417 - Thumbnail photo showing this microscope part. Meopta H6x microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00805 ]	SERMIK_ID number under which this microscope part is placed in the database. 00805	Meopta H6x microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Meopta H6x microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. These eyepieces are in excellent optical condition and show no signs of wear. Manufacturer: Meopta Type: Huygens Magnification: 6x Mounting diameter: 23. ... 2 mm 6x (and 8x) eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 6x/8x eyepieces provide the best image and optimal magnification. Names, descriptions, terms, and search contexts under which this part is searched. Meopta RU2 microscope repair parts Meopta microscope eyepieces Meopta Mikroskop Okulare okulary mikroskopowe Meopta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Meopta Meopta s.r.o.	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. RU2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Meopta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. RU2 DRU-3 Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have a head with its own 1.5x or 1.6x magnification and need the appropriate eyepieces, 6x are the right ones if you want to replace your poor-quality eyepieces	2026-01-28 00:00:00
418 - Thumbnail photo showing this microscope part. Meopta P10x microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00816 ]	SERMIK_ID number under which this microscope part is placed in the database. 00816	Meopta P10x microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Meopta P10x microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Manufacturer: Meopta Magnification: 10x Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Meopta RU2 microscope repair parts Meopta microscope eyepieces Meopta Mikroskop Okulare okulary mikroskopowe Meopta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Meopta Meopta s.r.o.	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. RU2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Meopta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. RU2 DRU-3 Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-01-28 00:00:00
419 - Thumbnail photo showing this microscope part. Meopta P15x microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00817 ]	SERMIK_ID number under which this microscope part is placed in the database. 00817	Meopta P15x microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Meopta P15x microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Manufacturer: Meopta Magnification: 15x Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Meopta RU2 microscope repair parts Meopta microscope eyepieces Meopta Mikroskop Okulare okulary mikroskopowe Meopta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Meopta Meopta s.r.o.	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. RU2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Meopta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. RU2 DRU-3 Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-01-28 00:00:00
423 - Thumbnail photo showing this microscope part. Lomo ML-2 K5x microscope compensating eyepieces 23,2 mm (pair) - thumbnail [ 00870 ]	SERMIK_ID number under which this microscope part is placed in the database. 00870	Lomo ML-2 K5x microscope compensating eyepieces 23,2 mm (pair)	The name of this microscope part. Lomo ML-2 K5x microscope compensating eyepieces 23,2 mm (pair)	Description of this part for the microscope. These eyepieces are in excellent optical condition. Manufacturer: Lomo Model: LM-2 K5x Type: compensating eyepieces Magnification: 5x Mount diameter: ... 23.2 mm Compensating 5x eyepieces are very often used as projection eyepieces for microscope photography. Names, descriptions, terms, and search contexts under which this part is searched. Lomo ML-2 microscope repair parts Lomo microscope compensation eyepieces Lomo Mikroskop Okulare Lomo Mikroskopokulare Mikroskop Kompensationokulare okulary mikroskopowe kompensacyjne Lomo Biolam microscope Lomo ML-2 microscope Lomo Biola Mikroskop Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-2 RU2 DRU-3 Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces Compensating 5x eyepieces are very often used as projection eyepieces for microscope photography	2026-01-31 00:00:00
435 - Thumbnail photo showing this microscope part. Hertel & Reuss BFO microscope trinocular head - thumbnail [ 00834 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00834	Hertel & Reuss BFO microscope trinocular head	The name of this microscope part. Hertel & Reuss BFO microscope trinocular head	Description of this part for the microscope. Very rarely encountered on the used equipment market trinocular microscope head manufactured by Hertel & Reuss. Manufacturer: Hertel & Reuss Model: BFO (= ... B=bino, FO = foto) Eyepiece diameter: 23.2 mm Mounting diameter: 50 mm Photo thread: 24 mm (M24) A trinocular head is a binocular microscope head with an additional third optical port for connecting a camera or photographic device. This particular unit comes from a Hertel & Reuss Studio II microscope, but it also works with any other microscope model from this manufacturer that has an interchangeable head with a mounting diameter of 50 mm. NOTE - as far as I remember, not all H&R microscopes have an easily interchangeable head; this applies, for example, to the Primus model. NOTE - some microscope models from Steindorff Berlin also have a head mounting diameter of 50 mm and are fully compatible with H&R heads - an example of such a microscope with a Hertel & Reuss head can be seen on Facebook at the following address: https://www.facebook.com/groups/136833493390496/posts/1722336908173472/ Other names: - photographic head - photo head - trinocular head - trino Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio II microscope repair parts Hertel & Reuss microscope trinocular Hertel & Reuss Mikroskop Trinokular głowica trino Hertel & Reuss Hertel & Reuss Mikroskop Kamera Fotoausgang c-mount mikroskop kamera anschliessen Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 149 €	Name of the category to which this microscope part is classified. Heads	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio II Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Metall Studio II	A list of potential uses for this part and when it might be needed. if you have a Hertel & Reuss microscope with a monocular or binocular head and want to connect a camera or photographic device if you have another microscope with a head mounting diameter of 50 mm	2026-02-03 23:04:59
444 - Thumbnail photo showing this microscope part. Hertel & Reuss 5:1 N.A. 0,10 microscope objective 5x - thumbnail [ 00837 ]	SERMIK_ID number under which this microscope part is placed in the database. 00837	Hertel & Reuss 5:1 N.A. 0,10 microscope objective 5x	The name of this microscope part. Hertel & Reuss 5:1 N.A. 0,10 microscope objective 5x	Description of this part for the microscope. Newer model of a rarely found Hertel & Reuss microscope objective with 5x magnification on the secondary market Manufacturer: Hertel & Reuss Model: 5:1 N.A. 0. ... 10 Magnification: 5x Numerical Aperture: 0.10 Thread: RMS Tubus length: 170 mm Focal length: 37 mm Among Hertel & Reuss low-magnification objectives, those with 4:1 magnification are most commonly found on the market. This 5:1 magnification model, especially in the newer housing version offered here, is rare. This objective can be used with practically any microscope that - has an RMS objective thread - TL = 170 mm - FL = 37 mm Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio II microscope repair parts H&R Hertel & Reuss Humboldt Kosmos Stuttgart mikroskop objektiv microscope objective obiektyw mikroskopowy Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio II Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-fl Studio C Primus Studio II	A list of potential uses for this part and when it might be needed. Primarily for people who want to complete their incomplete Hertel & Reuss microscope with original parts if your microscope is missing a 5x objective if you have a 5x objective that is damaged or in poor condition if you want to start with super-macro photo stacking if you have a microscope from any manufacturer supporting TL=170 FL=37, this objective is also for you	2026-02-05 00:00:00
450 - Thumbnail photo showing this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage "A" - thumbnail [ 99014 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99014	Hertel & Reuss mechanical XY cross mechanism for microscope stage "A"	The name of this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage "A"	Description of this part for the microscope. An XY cross stage is used for precise manipulation of a slide with a specimen on the microscope stage. The basic versions of the Hertel & Reuss microscopes have ... simple microscope stages with clips for holding the specimen. Therefore, at magnifications above 400x, manually manipulating the slide with the specimen becomes very difficult. XY cross stages are used for this purpose, for example, to move the specimen very precisely at 500x, 600x od 1000x magnification with oil immersion. This is not a cheap plastic cross stage - it is a well-made Hertel & Reuss design. NOTE - if the mounting pin spacing matches, this cross stage can be mounted on stages from virtually any manufacturer. Note - this is version "A" of the XY cross-stage mechanism - it differs from version "B" only in the shape of the screws, but in order to ensure that my photos always show the original item, each variant is listed separately in the database. Note - Hertel & Reuss manufactured cross stages with fixed specimen clamps as well as a model with a spring-loaded clamp. Here I present and offer the version with fixed clamps. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-hf microscope repair parts mikroskop microscope Hertel & Reuss Primus microscope stage Hertel & Reuss CN-fl mikroskoptisch stolik krzyżowy Hertel & Reuss Studio-C XY Kreuztisch Kreuzmechanismus Hertel & Reuss CN-hf Mikroskop Kreuztisch Objektführer Präparathalter specimen holder Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. XY-stages (specimen holders)	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-hf Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-hf Studio C CN-fl Primus	A list of potential uses for this part and when it might be needed. if you have a microscope with a standard stage and you need to precisely manipulate the slide with the preparation and use high magnifications	2026-02-09 00:00:00
451 - Thumbnail photo showing this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage "B" - thumbnail [ 99016 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99016	Hertel & Reuss mechanical XY cross mechanism for microscope stage "B"	The name of this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage "B"	Description of this part for the microscope. An XY cross stage is used for precise manipulation of a slide with a specimen on the microscope stage. The basic versions of the Hertel & Reuss microscopes have ... simple microscope stages with clips for holding the specimen. Therefore, at magnifications above 400x, manually manipulating the slide with the specimen becomes very difficult. XY cross stages are used for this purpose, for example, to move the specimen very precisely at 500x, 600x od 1000x magnification with oil immersion. This is not a cheap plastic cross stage - it is a well-made Hertel & Reuss design. NOTE - if the mounting pin spacing matches, this cross stage can be mounted on stages from virtually any manufacturer. Note - this is version "B" of the XY cross-stage mechanism - it differs from version "A" only in the shape of the screws, but in order to ensure that my photos always show the original item, each variant is listed separately in the database. Note - Hertel & Reuss manufactured cross stages with fixed specimen clamps as well as a model with a spring-loaded clamp. Here I present and offer the version with fixed clamps. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-hf microscope repair parts mikroskop microscope Hertel & Reuss Primus microscope stage Hertel & Reuss CN-fl mikroskoptisch stolik krzyżowy Hertel & Reuss Studio-C XY Kreuztisch Kreuzmechanismus Hertel & Reuss CN-hf Mikroskop Kreuztisch Objektführer Präparathalter specimen holder Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. XY-stages (specimen holders)	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-hf Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-hf Studio C CN-fl Primus	A list of potential uses for this part and when it might be needed. if you have a microscope with a standard stage and you need to precisely manipulate the slide with the preparation and use high magnifications	2026-02-09 00:00:00
455 - Thumbnail photo showing this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage \| specimen holder - thumbnail [ 99019 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99019	Hertel & Reuss mechanical XY cross mechanism for microscope stage \| specimen holder	The name of this microscope part. Hertel & Reuss mechanical XY cross mechanism for microscope stage \| specimen holder	Description of this part for the microscope. An XY cross stage is used for precise manipulation of a slide with a specimen on the microscope stage. The basic versions of the Hertel & Reuss microscopes have ... simple microscope stages with clips for holding the specimen. Therefore, at magnifications above 400x, manually manipulating the slide with the specimen becomes very difficult. XY cross stages are used for this purpose, for example, to move the specimen very precisely at 500x, 600x od 1000x magnification with oil immersion. This is not a cheap plastic cross stage - it is a well-made Hertel & Reuss design. NOTE - if the mounting pin spacing matches, this cross stage can be mounted on stages from virtually any manufacturer. Note - Hertel & Reuss manufactured cross stages with fixed specimen clamps as well as a model with a spring-loaded clamp. Here I present and offer the version with spring. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss CN-hf microscope repair parts mikroskop microscope Hertel & Reuss Primus microscope stage Hertel & Reuss CN-fl mikroskoptisch stolik krzyżowy Hertel & Reuss Studio-C XY Kreuztisch Kreuzmechanismus Hertel & Reuss CN-hf Mikroskop Kreuztisch Objektführer Präparathalter specimen holder Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 45 €	Name of the category to which this microscope part is classified. XY-stages (specimen holders)	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CN-hf Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CN-hf Studio C CN-fl Primus	A list of potential uses for this part and when it might be needed. if you have a microscope with a standard stage and you need to precisely manipulate the slide with the preparation and use high magnifications	2026-02-10 00:00:00
485 - Thumbnail photo showing this microscope part. Meopta O10x microscope eyepieces with a mounting diameter of 23.2 mm (pair 10x) - thumbnail [ 99057 ]	SERMIK_ID number under which this microscope part is placed in the database. 99057	Meopta O10x microscope eyepieces 23,2 mm (10x pair)	The name of this microscope part. Meopta O10x microscope eyepieces with a mounting diameter of 23.2 mm (pair 10x)	Description of this part for the microscope. Manufacturer: Meopta Model: O 10x Magnification: 10x Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Meopta DD 37 BN microscope repair parts Meopta microscope eyepieces Meopta Mikroskop Okulare okulary mikroskopowe Meopta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Meopta Meopta s.r.o.	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. DD 37 BN Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Meopta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. DD 37 BN RU2 DRU-3 Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-02-19 00:00:00
486 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 10x (15,5) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99049 ]	SERMIK_ID number under which this microscope part is placed in the database. 99049	Carl Zeiss Jena PK 10x (15,5) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 10x (15,5) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Magnification: 10x Field of view: 15,5 Mounting diameter: 23.2 mm Due to their very high quality, they are often used with ... microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts okulary plankompensacyjne Carl Zeiss Jena Carl Zeiss Jena plan compensation eyepieces Zeiss Jena Okulare microscope Mikroskop Planachromat objectives obiektywy plan planachromatyczne objektiv bino trino binokular głowica dwuoczna binocular head Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have 10x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	2026-02-19 00:00:00
554 - Thumbnail photo showing this microscope part. Zeiss Standard Junior - simple polarization POL eyepiece analyzer - thumbnail [ 99142 ]	SERMIK_ID number under which this microscope part is placed in the database. 99142	Zeiss Standard Junior - simple polarization POL eyepiece analyzer	The name of this microscope part. Zeiss Standard Junior - simple polarization POL eyepiece analyzer	Description of this part for the microscope. POL analyzer for simple polarization for monocular microscopes. This set can be be mounted onto a microscope eyepiece with microscopes of any manufacturer. ... Manufacturer: Carl Zeiss Name: POL analyzer for simple polarization Intended for: monocular biological microscopes Type: for use with transmitted or reflected light Hinweis: Please check whether the eyepiece diameter is suitable in order to mount the analyzer onto it. The dimensions of the analyzer housing are visible in the photos, and the housing also has a certain tolerance range. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard Junior microscope repair parts Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard Junior Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard Junior Studio C Lg Eduval Studar Biolam Biolam D11 CN-fl Primus V200 V100 HM-LUX 3 Kolleg SH45	A list of potential uses for this part and when it might be needed. If you want to start your adventure with observations in polarized light on your microscope	2026-03-04 00:00:00
583 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 50:1 N.A. 0,82 vintage 50x microscope objective - thumbnail [ 99138 ]	SERMIK_ID number under which this microscope part is placed in the database. 99138	Kosmos Stuttgart 50:1 N.A. 0,82 vintage 50x microscope objective	The name of this microscope part. Kosmos Stuttgart 50:1 N.A. 0,82 vintage 50x microscope objective	Description of this part for the microscope. Microscope objective for older microscopes (so called antique, vintage microscopes). Manufacturer: Kosmos-Stuttgart Model: 50:1 N.A.0.82 Magnification: ... 50x Thread: RMS Tube length: 170 mm (?) Focal length: 37 mm At that time (most likely in the 1960s) the objectives mounted in microscopes from different manufacturers looked very similar. Many microscope manufacturers ordered objectives from large optics manufacturers (e.g. Leitz Wetzlar) and then only engraved their own names on them. Compare this objective with another one which in the database has number 00618). Because of this, these objectives can be used with microscopes from many other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Modell C microscope repair parts Kosmos-Stuttgart MikroskopObjektiv vintage Kosmos-Stutgat microscope objective Hertel & Reuss Mikroskop Objektiv Humboldt Mikroskop Leitz Wetzlar vintage microscope Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 45 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Modell C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Modell C Humboldt SM Orthoplan CN-fl Studio C Vintage Black SM-D Vintage	A list of potential uses for this part and when it might be needed. for people who want to complete their incomplete vintage microscope with period parts if your microscope lacks a 50x objective if you have a 50x objective damaged or in poor condition if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you	2026-03-08 00:00:00
662 - Thumbnail photo showing this microscope part. Leitz Wetzlar Npl 40/0,65 170/0,17 microscope objective 40x (Leica) - thumbnail [ 99148 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99148	Leitz Wetzlar Npl 40/0,65 170/0,17 microscope objective 40x (Leica)	The name of this microscope part. Leitz Wetzlar Npl 40/0,65 170/0,17 microscope objective 40x (Leica)	Description of this part for the microscope. Parameters: Manufacturer: Leitz Wetzlar Magnification: 40x Color correction: NPL-achromat Numerical aperture: 0.65 Tube length: 170 mm Focal length: 45 ... mm Cover glass: 0,17 mm Immersion: no Thread: RMS Some information: - Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives. - Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them. - Objectives with a focal length of 45 mm can also be used in microscopes that currently use 37 mm objectives. Names, descriptions, terms, and search contexts under which this part is searched. Leitz Ortholux II microscope repair parts Leitz Orthoplan microscope objective Leitw Wetzlar Mikroskopobjektiv Leitz Ortholux Mikroskop Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Ortholux II Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Ortholux II SM-LUX Orthoplan SM Wetzlar microscope SM-D DD 37 BN DRU-3 RU2 Studio C CN-fl Primus Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	2026-03-20 23:28:49
663 - Thumbnail photo showing this microscope part. Leitz Wetzlar Pl 40/0,65 170/0,17 microscope objective 40x (Leica) - thumbnail [ 99149 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99149	Leitz Wetzlar Pl 40/0,65 170/0,17 microscope objective 40x (Leica)	The name of this microscope part. Leitz Wetzlar Pl 40/0,65 170/0,17 microscope objective 40x (Leica)	Description of this part for the microscope. Parameters: Manufacturer: Leitz Wetzlar Magnification: 40x Color correction: Plan-achromat Numerical aperture: 0.65 Tube length: 170 mm Focal length: ... 45 mm Cover glass: 0,17 mm Immersion: no Thread: RMS Some information: - Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives. - Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them. - Objectives with a focal length of 45 mm can also be used in microscopes that currently use 37 mm objectives. Names, descriptions, terms, and search contexts under which this part is searched. Leitz Orthoplan microscope repair parts Leitz Orthoplan microscope objective Leitw Wetzlar Mikroskopobjektiv Leitz Ortholux Mikroskop PLAN Objektiv Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Orthoplan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. SM-LUX Ortholux II Orthoplan SM Wetzlar microscope SM-D DD 37 BN DRU-3 RU2 Studio C CN-fl Primus Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a PLAN objective. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	2026-03-20 23:33:44
664 - Thumbnail photo showing this microscope part. Leitz Wetzlar Pl Fl 10/0,30 170/- microscope objective 10x (Leica) - thumbnail [ 99150 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99150	Leitz Wetzlar Pl Fl 10/0,30 170/- microscope objective 10x (Leica)	The name of this microscope part. Leitz Wetzlar Pl Fl 10/0,30 170/- microscope objective 10x (Leica)	Description of this part for the microscope. Parameters: Manufacturer: Leitz Wetzlar Magnification: 10x Color correction: Plan-fluotar Numerical aperture: 0.30 Tube length: 170 mm Focal length: 45 ... mm Cover glass: no Immersion: no Thread: RMS Some information: - Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives. - Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them. - Objectives with a focal length of 45 mm can also be used in microscopes that currently use 37 mm objectives. Names, descriptions, terms, and search contexts under which this part is searched. Leitz Orthoplan microscope repair parts Leitz Orthoplan microscope objective Leitw Wetzlar Mikroskopobjektiv Leitz Ortholux Mikroskop Plan-Fluor Objektiv Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 89 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Orthoplan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Orthoplan Ortholux II SM-LUX SM Wetzlar microscope SM-D DD 37 BN DRU-3 RU2 Studio C CN-fl Primus Model S Model M.Y. Model C.Y.N.	A list of potential uses for this part and when it might be needed. If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a Plan-Fluor objective. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	2026-03-20 23:40:08
731 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm - thumbnail [ 99286 ]	SERMIK_ID number under which this microscope part is placed in the database. 99286	Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm	The name of this microscope part. Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 20/0. ... 40 Magnification: 20x Correction: Achromat Numerical Aperture: 0.40 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Interestingly, despite its 20x magnification, this microscope objective is marked as requiring no coverslip. Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 20x objective lens for your microscope from another manufacturer	2026-04-04 14:03:15
732 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm - thumbnail [ 99287 ]	SERMIK_ID number under which this microscope part is placed in the database. 99287	Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm	The name of this microscope part. Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 10/0. ... 30 Magnification: 10x Correction: Achromat Numerical Aperture: 0.30 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 10x objective lens for your microscope from another manufacturer	2026-04-04 14:18:26
733 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm - thumbnail [ 99288 ]	SERMIK_ID number under which this microscope part is placed in the database. 99288	Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm	The name of this microscope part. Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 30/0. ... 55 Magnification: 30x Correction: Achromat Numerical Aperture: 0.55 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Interestingly, despite its 30x magnification, this microscope objective is marked as requiring no coverslip. Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 30x objective lens for your microscope from another manufacturer	2026-04-04 14:21:58
734 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm - thumbnail [ 99289 ]	SERMIK_ID number under which this microscope part is placed in the database. 99289	Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm	The name of this microscope part. Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/0.17 63/0. ... 85 Magnification: 63x Correction: Achromat Numerical Aperture: 0.85 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: Yes, 0.17 mm Immersion: No (dry) Thread: RMS Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good dry 63x objective lens for your microscope from another manufacturer	2026-04-04 14:27:01
752 - Thumbnail photo showing this microscope part. Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x - thumbnail [ 00779 ]	SERMIK_ID number under which this microscope part is placed in the database. 00779	Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x	The name of this microscope part. Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x	Description of this part for the microscope. Carl Zeiss (Germany) microscope objective. Technical parameters: Manufacturer: Carl Zeiss (Germany) Magnification: 2,5x Model: Plan 2,5/0, ... 08 160/- Color correction: Planachromat Numerical aperture: 0.08 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking. Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics. A microscope objective with such low magnification is used, among others, in the following fields: - tissue overview examination in pathomorphology - observation of insects - observation of minerals - observation of inclusions in amber - handwriting analysis - observation of micromollusks - and many others Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Carl Zeiss Mikroskopobjektiv Carl Zeiss Standard GFL microscope objective Carl Zeiss Universal Mikroskop Objektiv mit kleine Vergrößerung Carl Zeiss Phomi Weitfeld Mikroskopobjektiv Grossfeld Mikroskopobjektiv für Pathologie Zeiss Übersichtsobiektiv Zeiss Mikroskopobjektiv für Blutuntersuchung obiektyw mikroskopowy do obserwacji owadów Mikroskop-Planobjektiv für Insektenntersuchung Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-12 15:50:57
763 - Thumbnail photo showing this microscope part. Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x - thumbnail [ 99323 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99323	Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x	The name of this microscope part. Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x	Description of this part for the microscope. Manufacturer: Carl Zeiss West Germany Model: Ph2 40 0,65 Magnification: 40x Correction: Achromat Numerical Aperture: 0,65 Tube Length: 160 mm Focal ... Length: 45 mm Cover Glass: yes, 0,17 mm Immersion: no Thread: RMS Info: Ph = phase contrast It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Universal microscope repair parts Carl Zeiss Standard GF Ph2 Phasenkontrast Mikroskopobjektiv Carl Zeiss 40x phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss Universal Mikroskop Carl Zeiss Photomikroskop Phasenkontrast Kondensor Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Universal Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-14 00:08:25
764 - Thumbnail photo showing this microscope part. Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x - thumbnail [ 99324 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99324	Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x	The name of this microscope part. Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x	Description of this part for the microscope. Manufacturer: Carl Zeiss West Germany Model: Ph3 100 1,25 Oel Magnification: 100x Correction: Achromat Numerical Aperture: 1,25 Tube Length: 160 ... mm Focal Length: 45 mm Cover Glass: yes, 0,17 mm Immersion: yes, oil Thread: RMS Info: Ph3 = phase contrast It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Universal microscope repair parts Carl Zeiss Standard GF Ph3 Phasenkontrast Mikroskopobjektiv Carl Zeiss 100x oil phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss Universal Mikroskop Carl Zeiss Photomikroskop Phasenkontrast Kondensor Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Universal Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-14 00:55:15
765 - Thumbnail photo showing this microscope part. PZO Vintage PZO ML2 K15x microscope eyepiece - thumbnail [ 99315 ]	SERMIK_ID number under which this microscope part is placed in the database. 99315	Vintage PZO ML2 K15x microscope eyepiece	The name of this microscope part. Vintage PZO ML2 K15x microscope eyepiece	Description of this part for the microscope. Microscope eyepiece (single, also 1 pc.) Manufacturer: PZO Model: K15x Magnification: 15x Mounting diameter: 23.2 mm This eyepiece works with any ... microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO ML2 microscope repair parts Vintage PZO K 15x microscope eyepiece okular 15x do mikroskopu PZO PZO K15x Mikroskop Okular antique PZO Mikroskop PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML2 ML1 MS4 ML4 ML5 Biolar FL MinO M-100 M-110 M-200 M-440 MS-16 MS-2 Lg Lr Lu Eduval Laboval Laboval-2 Epignost More [...] CK2 CH-2 CHT MPD-1 Biolam M-9 Biolam D11 MBI-1 MBP-1 Erudit Biolam 70 Standard Junior KF 2 CN-fl Primus CN-hf V200 V100 Laborlux S Wetzlar microscope SM-LUX SM-D Model S Model M.Y. Biopan Neopan Kolleg SH45 M2240 UFA 626 UFD 121 UFD 122 1036a One-Ten	A list of potential uses for this part and when it might be needed. if you have such a Vintage microscope and you want to complete it using original parts	2026-04-14 14:34:59
782 - Thumbnail photo showing this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x - thumbnail [ 99335 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99335	PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	The name of this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	Description of this part for the microscope. Polarization-interference microscope objective by PZO Basic parameters: Manufacturer: PZO Poland Model: 10/0,24 PI 160/- Magnification: ... 10x Correction: Achromat Numerical aperture: 0.24 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS Info: PI = polarization-interference objective (red ring). Compatible with the following PZO condensers: - PZO KPI 2 - slit condenser PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC). VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference. In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL. Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true. DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this. It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar DIC microscope repair parts PZO Biolar DIC PI polarisation-interferenz Mikroskopobjektiv PZO UPI Pluta polarisation interference microscope objective obiektyw PZO polaryzacyjno-interferencyjny PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar DIC Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolar DIC Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it if you need a polarization-interference objective for your own purposes if you have such an objective but it is of very poor quality or damaged if you want to keep such an objective as a spare	2026-04-16 23:37:42
800 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x - thumbnail [ 99365 ]	SERMIK_ID number under which this microscope part is placed in the database. 99365	Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x	The name of this microscope part. Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 3,2x Model: Planachromat 3,2/0, ... 10 160/- Color correction: Planachromat Numerical aperture: 0.10 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking. Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics. A microscope objective with such low magnification is used, among others, in the following fields: - tissue overview examination in pathomorphology - observation of insects - observation of minerals - observation of inclusions in amber - handwriting analysis - observation of micromollusks - and many others It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleine Vergrößerung Carl Zeiss Jena Weitfeld Mikroskopobjektiv Grossfeld Mikroskopobjektiv für Pathologie Zeiss Übersichtsobiektiv Zeiss Mikroskopobjektiv für Blutuntersuchung obiektyw mikroskopowy do obserwacji owadów Mikroskop-Planobjektiv für Insektenntersuchung obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 17:22:15
801 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x - thumbnail [ 99366 ]	SERMIK_ID number under which this microscope part is placed in the database. 99366	Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x	The name of this microscope part. Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 10x Model: Planachromat 10/0,25 160/- ... Color correction: Planachromat Numerical aperture: 0.25 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 17:42:26
802 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x - thumbnail [ 99367 ]	SERMIK_ID number under which this microscope part is placed in the database. 99367	Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x	The name of this microscope part. Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 16x Model: Planachromat 16/0,32 160/0, ... 17 Color correction: Planachromat Numerical aperture: 0.32 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:01:40
803 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x - thumbnail [ 99368 ]	SERMIK_ID number under which this microscope part is placed in the database. 99368	Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x	The name of this microscope part. Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 40x Model: Planachromat 40/0,65 160/0, ... 17 Color correction: Planachromat Numerical aperture: 0.65 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:04:56
804 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x - thumbnail [ 99369 ]	SERMIK_ID number under which this microscope part is placed in the database. 99369	Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x	The name of this microscope part. Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 100x Model: Planachromat HI 100/1,25 160/0, ... 17 Color correction: Planachromat Numerical aperture: 1,25 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: yes, oil Thread: RMS Info: HI = Homogene Immersion, also oil immersion It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:15:29
805 - Thumbnail photo showing this microscope part. PZO 5xH microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99371 ]	SERMIK_ID number under which this microscope part is placed in the database. 99371	PZO 5xH microscope eyepieces 23,2 mm (pair)	The name of this microscope part. PZO 5xH microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Pair (two pieces) of microscope eyepieces. Manufacturer: PZO Magnification: 5x Model: PZO 5xH Type: Huygens Mounting Diameter: 23.2 mm These ... eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Studar microscope repair parts PZO Biolar microscope eyepieces PZO Studar Mikroskop Okulare okulary mikroskopowe PZO Huygens Mikroskopokulare PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 10	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studar Biolar MB-30 MS4 ML4 ML5 ML6 MS6 MST-110 MST-127 MET-3 Biolar FL MNT-6 Trinocular Photo Head MND-4 Binocular Head MNJ-4 Mono Head (monocular) MinO M-100 M-110 M-200 M-440 More [...] MS-16 MS-2 MB 30S MB-10 MB-30 FL MND-5 ML1 ML2 MND-6 Biolar DIC Lg Lr Lu Lumipan Nf NfPk Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Amplival Ergaval Vertival Epival Metaval Fluoval Epityp-2 Epignost BH-2 BHS CK2 BHA CH CH-2 CHT BHM BH-2 BHTU SC TMS M20 MPD-1 MICMED-2 MBB-1 Biolam M-9 Biolam D11 MBI-1 AU-26 binocular head MBR-3 MBP-1 Erudit Biolam 70 ID 02 Zeiss Standard microscope binocular head Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope Standard Junior KF 2 Ultraphot DD 37 BN DRU-3 RU2 Biorom ML-4M MC-7 MC-6 Vintage Monocular Studio C CN-fl Primus Superpan Labopan Metall Studio II CN-hf V200 V100 V300 Dialux Aristomet HM-LUX 3 Laborlux S Laborlux 11 Pol S Trichinenmikroskop SM-LUX Ortholux II Orthoplan SM-D Metallux 3 Diaplan Model B.Y. Microbe Hunter Model S Model M.Y. Model C.Y.N. Neozet Zetopan Biopan Neopan Novex K-Range Kolleg SH45 M2240 Collegiate 400 M4000-D Eleven Ninety UFA 626 UFD 121 UFD 122 Microsystem 70 M72 M15 M70 Patholux Patholette 1036a One-Fifty One-Ten Diamax Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-04-23 18:53:13
806 - Thumbnail photo showing this microscope part. PZO 15x microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99372 ]	SERMIK_ID number under which this microscope part is placed in the database. 99372	PZO 15x microscope eyepieces 23,2 mm (pair)	The name of this microscope part. PZO 15x microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Pair (two pieces) of microscope eyepieces. Manufacturer: PZO Magnification: 15x Mounting Diameter: 23.2 mm These eyepieces can be used with ... microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar microscope repair parts PZO Biolar microscope eyepieces PZO Studar Mikroskop Okulare okulary mikroskopowe PZO PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 20 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studar Biolar MB-30 MS4 ML4 ML5 ML6 MS6 MST-110 MST-127 MET-3 Biolar FL MNT-6 Trinocular Photo Head MND-4 Binocular Head MNJ-4 Mono Head (monocular) MinO M-100 M-110 M-200 M-440 More [...] MS-16 MS-2 MB 30S MB-10 MB-30 FL MND-5 ML1 ML2 MND-6 Biolar DIC Lg Lr Lu Lumipan Nf NfPk Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Amplival Ergaval Vertival Epival Metaval Fluoval Epityp-2 Epignost BH-2 BHS CK2 BHA CH CH-2 CHT BHM BH-2 BHTU SC TMS M20 MPD-1 MICMED-2 MBB-1 Biolam M-9 Biolam D11 MBI-1 AU-26 binocular head MBR-3 MBP-1 Erudit Biolam 70 ID 02 Zeiss Standard microscope binocular head Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope Standard Junior KF 2 Ultraphot DD 37 BN DRU-3 RU2 Biorom ML-4M MC-7 MC-6 Vintage Monocular Studio C CN-fl Primus Superpan Labopan Metall Studio II CN-hf V200 V100 V300 Dialux Aristomet HM-LUX 3 Laborlux S Laborlux 11 Pol S Trichinenmikroskop SM-LUX Ortholux II Orthoplan SM-D Metallux 3 Diaplan Model B.Y. Microbe Hunter Model S Model M.Y. Model C.Y.N. Neozet Zetopan Biopan Neopan Novex K-Range Kolleg SH45 M2240 Collegiate 400 M4000-D Eleven Ninety UFA 626 UFD 121 UFD 122 Microsystem 70 M72 M15 M70 Patholux Patholette 1036a One-Fifty One-Ten Diamax Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-04-23 19:35:13
810 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography - thumbnail [ 99370 ]	SERMIK_ID number under which this microscope part is placed in the database. 99370	Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography	The name of this microscope part. Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography	Description of this part for the microscope. Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 6. ... 3x Model: Semiplan 6.3/0.16 160/- Color correction: Semi-Planachromat Numerical aperture: 0.16 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This is one of the most commonly used microscope objectives for macro photography and focus stacking. Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics. It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Semiplan Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleine Vergrößerung obiektyw mikroskopowy do fotografowania owadów Mikroskop-Semiplan Objektiv für Insekten-makrofotografie Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 169 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you need a microscope objective for macro photography If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 23:11:02
919 - Thumbnail photo showing this microscope part. Lomo 4x microscope eyepiece - thumbnail [ 99314 ]	SERMIK_ID number under which this microscope part is placed in the database. 99314	Lomo 4x microscope eyepiece	The name of this microscope part. Lomo 4x microscope eyepiece	Description of this part for the microscope. Microscope eyepiece (single, also 1 pc.) Manufacturer: Lomo Magnification: 4x Mounting diameter: 23.2 mm A microscope eyepiece with such low ... magnification is very often used as a projection eyepiece for microphotography. This eyepiece works with any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. Lomo ML-2 microscope repair parts Lomo 4x microscope eyepiece Lomo Mikroskopokular Carl Zeiss Jena Mikroskopokular PZO Mikroskopokular Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-2 Biolam M-9 Biolam D11 MBI-1 MBP-1 Erudit Biolam 70 Standard Junior KF 2 Lg Lr Lu Eduval Laboval Laboval-2 Epignost CK2 CH-2 CHT MPD-1 More [...] CN-fl Primus CN-hf V200 V100 Laborlux S Wetzlar microscope SM-LUX SM-D Model S Model M.Y. Biopan Neopan Kolleg SH45 M2240 UFA 626 UFD 121 UFD 122 1036a One-Ten ML2 ML1 MS4 ML4 ML5 Biolar FL MinO M-100 M-110 M-200 M-440 MS-16 MS-2	A list of potential uses for this part and when it might be needed. when you need an eyepiece with low magnification and a wide field of view when you need an eyepiece for microphotography	2026-06-02 21:48:00
930 - Thumbnail photo showing this microscope part. Leitz Wetzlar 45/0,65 170/0,17 RMS microscope objective (45x Leica) - thumbnail [ 99483 ]	SERMIK_ID number under which this microscope part is placed in the database. 99483	Leitz Wetzlar 45/0,65 170/0,17 RMS microscope objective (45x Leica)	The name of this microscope part. Leitz Wetzlar 45/0,65 170/0,17 RMS microscope objective (45x Leica)	Description of this part for the microscope. Leitz Wetzlar microscope objective. Manufacturer: Leitz Wetzlar Magnification: 45x Color correction: achromat Numerical aperture: 0.65 Tube length: ... 170 mm Focal length: 37 mm Cover glass: yes, 0.17 mm Immersion: no Thread: RMS This objective was removed from a Leitz Dialux microscope, but it is compatible with most Leitz Wetzlar microscopes manufactured approximately before 1980 (SM, SM-Lux, Dialux, Ortholux, Orthoplan, etc.). Some useful information about Leitz Wetzlar objectives with TL=170 mm and FL=37 mm: - most Leitz microscopes manufactured approximately before 1980 support both 160 mm and 170 mm tube length objectives - many Leitz microscopes support both 37 mm and 45 mm focal length objectives - by adding an RMS-8mm adapter, such an objective obtains a focal length of 45 mm. Leitz manufactured such adapters under the name "Plezzy" - however, many users make their own versions from metal or by using 3D printers Names, descriptions, terms, and search contexts under which this part is searched. Leitz Dialux microscope repair parts Mikroskopobjektiv für Leitz SM und Leitz Dialux Mikroskope Leitz Wetzlar Ortholux / Orthoplan 45x Mikroskop Objektiv Leitz Wetzlar Leitz Objektiv mit 37 mm Abgleichlänge Leitz Objektiv mit 170 mm Tubuslänge Leitz Wetzlar microscope objective Leitz objective for Dialux / Ortholux and Orthoplan microscopr Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Dialux Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Dialux SM Ortholux II Orthoplan SM-D Studio C CN-fl Binocular biological Model S Model M.Y. Model C.Y.N. Wetzlar microscope	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you want to keep such an objective lens as a spare	2026-06-07 18:20:37
938 - Thumbnail photo showing this microscope part. Schuchardt Dr. G. Schuchardt Göttingen 5x microscope eyepiece - thumbnail [ 99485 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99485	Dr. G. Schuchardt Göttingen 5x microscope eyepiece	The name of this microscope part. Dr. G. Schuchardt Göttingen 5x microscope eyepiece	Description of this part for the microscope. Microscope eyepiece (single, also 1 pc.) Manufacturer: Dr. G. Schuchardt Göttingen Magnification: 5x Mounting diameter: 23.2 mm This eyepiece works with ... any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. The company "Dr. G. Schuchardt Göttingen" did not and does not produce microscopes. Previously, it primarily sold microscopes manufactured by Hertel & Reuss and Will Wetzlar under its own brand. Names, descriptions, terms, and search contexts under which this part is searched. Schuchardt model microscope repair parts Dr. G. Schuchardt Göttingen microscope eyepiece Dr. G. Schuchardt Göttingen Mikroskop Okular Schuchardt buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Schuchardt Dr. G. Schuchardt Göttingen	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Schuchardt) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model ML-2 Biolam M-9 Biolam D11 MBI-1 MBP-1 Erudit Biolam 70 Standard Junior KF 2 Lg Lr Lu Eduval Laboval Laboval-2 Epignost CK2 CH-2 CHT More [...] MPD-1 CN-fl Primus CN-hf V200 V100 Laborlux S Wetzlar microscope SM-LUX SM-D Model S Model M.Y. Biopan Neopan Kolleg SH45 M2240 UFA 626 UFD 121 UFD 122 1036a One-Ten ML2 ML1 MS4 ML4 ML5 Biolar FL MinO M-100 M-110 M-200 M-440 MS-16 MS-2	A list of potential uses for this part and when it might be needed. if you have such a microscope and you want to complete it using original parts	2026-06-08 23:51:39
953 - Thumbnail photo showing this microscope part. Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906 - thumbnail [ 99500 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99500	Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906	The name of this microscope part. Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906	Description of this part for the microscope. Microscope objective manufactured by Zeiss West Germany. Technical parameters: Manufacturer: Zeiss West Germany Magnification: 16x Model: Plan 16/0. ... 35 160/0.17 Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906) Color correction: Planachromat Numerical aperture N.A.: 0.35 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm thickness Immersion: no (dry objective) Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Zeiss Plan Mikroskopobjektiv Zeiss Standard GFL / WL microscope objective Zeiss Phomi / Universal Mikroskop Objektiv Zeiss West Germany planachromat microscope objective Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 95 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-06-17 12:23:56
954 - Thumbnail photo showing this microscope part. Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904 - thumbnail [ 99501 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99501	Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904	The name of this microscope part. Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904	Description of this part for the microscope. Microscope objective manufactured by Zeiss West Germany. Technical parameters: Manufacturer: Zeiss West Germany Magnification: 40x Model: Plan 40/0. ... 65 160/0.17 Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904) Color correction: Planachromat Numerical aperture N.A.: 0.65 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm thickness Immersion: no (dry objective) Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Zeiss Plan Mikroskopobjektiv Zeiss Standard GFL / WL microscope objective Zeiss Phomi / Universal Mikroskop Objektiv Zeiss West Germany planachromat microscope objective Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 125 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand if you currently have an achromatic microscope objective and want to change it to a plan achromatic one to have a flat image in the full field of view	2026-06-17 12:30:55
987 - Thumbnail photo showing this microscope part. Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x - thumbnail [ 99536 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99536	Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x	The name of this microscope part. Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x	Description of this part for the microscope. Microscope objective manufactured by Leitz Wetzlar with 100x magnification, designed for brightfield and phase contrast work. Manufacturer: Leitz ... Wetzlar Model: 160/0,17 EF 100/1.25 OEL PHACO 3 Magnification: 100x Correction: semi-plan achromat Numerical aperture: 1.25 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm Immersion: yes, oil Thread: RMS Specimen protection: yes - spring-loaded Info: PHACO 3 = phase contrast Some important information about this objective: - the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces - the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat - this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm - the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3") - this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters). Names, descriptions, terms, and search contexts under which this part is searched. Leitz Diaplan microscope repair parts Leitz Wetzlar Diaplan Phasenkontrast Mikroskopobjektiv Leitz Wetzlar 100x oil phase contrast microscope objective Leitz Wetzlar Phasenkontrast-Mikroskop Leitz (Leica) Mikroskop Leitz Wetzlar 160 mm Phasenkontrast Kondensor Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 119 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Diaplan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol More [...] Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-06-28 14:59:54
988 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 20x (8) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99531 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99531	Carl Zeiss Jena PK 20x (8) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 20x (8) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Plan compensating microscope eyepieces manufactured by Carl Zeiss Jena with a high magnification of 20x. Manufacturer: Carl Zeiss Jena Model: PK 20x ... (8) Magnification: 20x Field of view: 8 Mounting diameter: 23.2 mm Designation: PK = plan compensating - recommended for use with plan achromatic objectives, but they also work perfectly with achromatic and apochromatic objectives Due to their very high quality, these eyepieces are often used together with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are installed. Important: these eyepieces can be used both with finite tube microscopes (e.g. 160 mm) and infinity-corrected microscopes. This means that they can be used, for example, both on a Carl Zeiss Jena Amplival microscope and on a Carl Zeiss Jena NU-2 microscope. Note - in my opinion, eyepieces with such a high magnification are recommended rather for "inspection" than for continuous work. I deliberately write "I recommend" because this is my personal opinion based on practical use and not on the manufacturer's documentation. An eyepiece magnification of 20x should rather be treated as a zoom without revealing additional details (the resolution is not increased). This is important, for example, in heads with built-in magnification (e.g. Carl Zeiss Jena heads with built-in magnification of 1.5x or 1.6x) - when working with a 100x oil immersion objective, we theoretically obtain 1001.520 = 3000x, while physics does not allow the human eye to magnify visible light beyond approximately 1250x - therefore this is a so-called "empty magnification". Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts Carl Zeiss Jena 20x PK Mikroskop Okulare Mikroskop Brile für Carl Zeiss Jena Amplival und Ergaval Mikroskope Carl Zeiss Jena NU-2 Mikroskopuokulare Carl Zeiss Jena 20x PK microscope eyepieces Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have 20x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	2026-06-28 15:29:36
1004 - Thumbnail photo showing this microscope part. Hertel & Reuss microscope objective plastic container RMS - thumbnail [ 99550 ]	SERMIK_ID number under which this microscope part is placed in the database. 99550	Hertel & Reuss microscope objective plastic container RMS	The name of this microscope part. Hertel & Reuss microscope objective plastic container RMS	Description of this part for the microscope. Plastic microscope objective case made by Hertel & Reuss. Case parameters: Material: plastic Length: suitable for DIN-45 objectives or shorter Diameter: ... not intended for so-called "thick" objectives Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type. Various names are used on the secondary market for a microscope objective case, including: - objective case - microscope objective case - objective container - microscope objective container - objective storage case - objective storage container - objective box - objective storage box - protective objective case - objective lens case - objective lens container - dust protection case - transport case for microscope objectives - microscope objective holder case - storage canister for microscope objectives Each case has the Hertel & Reuss logo on its cap. Although this case is of greatest interest to users and collectors of objectives made by the manufacturer Hertel & Reuss, it can of course be used to store objectives from any manufacturer. Names, descriptions, terms, and search contexts under which this part is searched. Hertel & Reuss Studio C microscope repair parts Hertel & Reuss Mikroskop Objektivbox Hertel & Reuss Mikroskop Objektiv Schutzbox Hertel & Reuss microscope objective box Hertel & Reuss microscope objective container case Hertel & Reuss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Accessories	Abbreviated and full name of the manufacturer of this microscope part. Hertel & Reuss Hertel & Reuss Kassel (West Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studio C Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Hertel & Reuss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studio C CN-fl Primus Superpan Labopan Vintage Black Metall Studio II CN-hf	A list of potential uses for this part and when it might be needed. if you need an empty objective case to protect your objectives from dust or mechanical damage	2026-07-07 20:24:44
1026 - Thumbnail photo showing this microscope part. Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm - thumbnail [ 99563 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99563	Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm	The name of this microscope part. Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm	Description of this part for the microscope. PLAN achromatic polarizing microscope objective Lomo PLAN 25x0.50 P with iris diaphragm for Lomo Polam series polarizing microscopes. Basic par ... ameters: Manufacturer: Lomo Model: PLAN 25x0.50 P Original designation: ЛОМО ПЛАН 25х0,50 П Magnification: 25x Numerical aperture N.A.: 0.50 Tube length: 160 mm Cover glass: yes, 0.17 mm thickness Immersion oil: no – this is a dry objective Focal length: 45 mm Thread type: RMS Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light Special features: built-in iris diaphragm Year of manufacture: 1976 This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others. The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously: - field diaphragm in the illuminator - aperture diaphragm (or two aperture diaphragms) in the condenser - iris diaphragm in the microscope objective - iris diaphragm in the eyepiece head and accurate centering of all of them relative to each other is very important in polarized-light observations. Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Polam L-213 microscope repair parts Lomo Polam POL-Mikroskop Objektiv Lomo Polam Mikroskopobjektiv mit Irisblende Lomo Polam Mikroskop 25x RMS Objektiv Lomo Polam microscope objective Lomo Polam polarizing microscope objective Lomo objective with iris diaphragm Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Polam L-213 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lomo Polam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Polam L-213 Lomo Polam S-111 Lomo Polam S-112 Lomo Polam R-111 Lomo Polam R-112 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II More [...] Orthoplan Diaplan Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Biolam D11 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any manufacturer and this is the objective you are missing	2026-07-12 23:17:10
1154 - Thumbnail photo showing this microscope part. Schuchardt Dr. G. Schuchardt Göttingen 15x microscope eyepiece - thumbnail [ 91002 ]	SERMIK_ID number under which this microscope part is placed in the database. 91002	Dr. G. Schuchardt Göttingen 15x microscope eyepiece	The name of this microscope part. Dr. G. Schuchardt Göttingen 15x microscope eyepiece	Description of this part for the microscope. Microscope eyepiece (single, also 1 pc.) Manufacturer: Dr. G. Schuchardt Göttingen Magnification: 15x Mounting diameter: 23.2 mm This eyepiece works with ... any microscope from any manufacturer that allows the use of eyepieces with a mounting diameter of 23.2 mm. The company "Dr. G. Schuchardt Göttingen" did not and does not produce microscopes. Previously, it primarily sold microscopes manufactured by Hertel & Reuss and Will Wetzlar under its own brand. Names, descriptions, terms, and search contexts under which this part is searched. Schuchardt model microscope repair parts Dr. G. Schuchardt Göttingen microscope eyepiece Dr. G. Schuchardt Göttingen Mikroskop Okular Schuchardt buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Schuchardt Dr. G. Schuchardt Göttingen	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Schuchardt) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model CN-fl Primus CN-hf V200 V100 Kolleg SH45	A list of potential uses for this part and when it might be needed. if you have such a microscope and you want to complete it using original parts	2026-09-12 16:03:06

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.