Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

PhA (negative, anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

Description of this part for the microscope.

discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

Description of this part for the microscope.

apertures. This allows the use of a darkfield condenser with an aperture diaphragm.

Description of this part for the microscope.

and other fluorescence microscopes from this company.

Description of this part for the microscope.

a disc with the appropriate aperture on the condenser - and this is just such a disc.

Description of this part for the microscope.

PhA (negative, anoptral, yellow stripe*), PhS (positive, gray stripe), and A (amplitude phase contrast, brown stripe).
Condenser: Compatible with PZO K3Ph, K3Ph1, KS and K4Ph condensers. Not compatible with PZO K3Phz, KFF, and KFL condensers.
It also fits the PZO KS condenser (from the PZO MB30S microscope) after installing the appropriate polarizers.

The PZO phase contrast kit can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

PhA (negative, anoptral, yellow stripe*), PhS (positive, gray stripe), and A (amplitude phase contrast, brown stripe).
Condenser: Compatible with PZO K3Ph, K3Ph1, KS and K4Ph condensers. Not compatible with PZO K3Phz, KFF, and KFL condensers.
It also fits the PZO KS condenser (from the PZO MB30S microscope) after installing the appropriate polarizers.

The PZO phase contrast kit can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

eyepiece
- 52 mm > 39 mm thread adapter for Olympus Camedia
- Olympus Camedia Zoom C-5000 5.0 Mpx camera

This kit allows you to take micrographs on PZO microscopes. It can be mounted either
- instead of a head on biological microscopes
- on the PZO MNT-6 trino head
- one the PZO DIC MPI2 / MPI3 / MPI5
- or on the PZO NF-SB3 L1 adapter with a T6 connector for PZO MST-130 / 131 / 132 stereo microscopes.

Description of this part for the microscope.

Description of this part for the microscope.

dovetail connection in many PZO microscopes and microscope accessories:

- PZO Biolar, MB-30 microscopes, some versions of Studar, ML-5, ML-6, and others
- PZO OE-1 and OE-4 EPI illuminators
- MPI-5 and MPI-3 DIC head
- PZO KS stereo contrast attachment
- magnification changer attachment
- photographic tubes for the PZO MNT6 trino head
- PZO MST-130/131 stereo microscope attachments (adapter for T6)

Users often install this PZO head mount on microscopes from other companies to use the PZO DIC.

Description of this part for the microscope.

mounting screw
- two long screws for centering the condenser

This part is compatible with the following PZO microscopes:
- MB 30
- MB 30S
- MS 5
- ML 4
- ML 5
- ML 6

Note - This part is BLACK. Please note that the microscopes it is compatible with may have different paint colors.

Note - This part is from the PZO MB-30 microscope, so it has long screws for centering the condenser. It differs from the condenser holders of the MS and ML models in these screws; i.e., the MS and ML do not have such long screws for centering the condenser. Users of PZO MS and PZO ML series microscopes often replace their condenser holder with the one in the MB-30 to easily center the condenser, which is especially convenient when using the condenser for phase contrast.

Note - the gear rack on which this mechanism moves is NOT included in the kit.

If you need smaller, individual components of this module (e.g., a gear knob, centering screws, or anything else) - contact us

Description of this part for the microscope.

mechanism. This block only includes a coarse (macro) feed mechanism.
More specifically, if such a block were complete, it would also include a fine (micro) feed module. This module is simply not included in the unit offered here. Therefore, it is an attractive component for those looking to repair a coarse (macro) feed.

- Black focusing block
- Coarse (macro) feed gear system
- Coarse (macro) feed knobs
- Coaxial fine (micro) feed knobs
- Tension adjustment mechanism

The tension adjustment mechanism is a very important component of a microscope. The PZO MB-30 and ML series microscopes move the entire column (the entire arm) up and down, and this resistance adjustment mechanism prevents the arm from lowering itself if additional components are installed, such as a DIC head or a camera on a trinocular head (as they constitute additional weight).

If you need a precise (micro) movement mechanism, which is missing here, if you need a complete focusing block, or if you need individual components from this block (e.g., a single gear or just the knobs), please contact us

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: glossy | mirror-finish

Description of this part for the microscope.

Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: PZO
Model: K15x
Magnification: 15x
Image: micrometer and X-crosshair
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide. The entire unit is housed in an original wooden box.

The kit includes a slide with a standard micrometer scale to calibrate this eyepiece at any magnification.

Identical K15x eyepieces were also made by other manufacturers, such as Lomo and Carl Zeiss Jena.

Description of this part for the microscope.

45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

mm
Cover Glass: no
Immersion: no
Thread: RMS
Info: Ph = Zernike phase contrast (green bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

Info: Ph (Zernike) objectives produce an exceptionally nice image with a bluish background when used with KS phase contrast condensers from the PZO MB-30S microscope.

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (-)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

0,24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (0)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

(not BA15d)
Filament type: flat, horizontal

For example, fits:
- PZO MB-30 microscope
- PZO OE1 EPI illuminator
- PZO LMK Koehler microscope lamp

NOTE - IMPORTANT - This bulb does not fit the PZO Biolar microscope.

Description of this part for the microscope.

30S microscope base consists of:
- an illuminator (light source)
- a "tube" containing a collimating lens and a field diaphragm
- a screw securing the tube
- an angle mirror that reflects light at 90 degrees

Two components of this tube are offered here:
- a metal tube with a lens collimating the illumination beam
- a metal tube with a field diaphragm (iris diaphragm)

There are two critical components here: the collimating lens, which often cracks under temperature, and the field diaphragm, whose blades are prone to bending.

Description of this part for the microscope.

manufactured by PZO and removed from the PZO MB-30 microscope.

Compatible with the following microscopes:
- PZO MB-30 / MB-30S
- PZO ML4 / ML5 / ML6

I need to check if it fits the PZO MS series microscopes.

Description of this part for the microscope.

This part is often damaged in PZO SK8 microscope stages: because the knobs extend beyond the microscope's outline after installation, the worm shaft often bends during transport, making it difficult to straighten properly.

The PZO SK8 is a mechanical microscope stage with horizontal knobs, primarily used in PZO MB30 microscopes, ML series models, and PZO MST-130/131 stereo microscopes - but is also sometimes installed in Studar and Biolar models.

Description of this part for the microscope.

Monocular microscope head for a fluorescence microscope
Model: PZO MNJ-4
Mounting method: dovetail, diameter 43 mm
Supported eyepieces: 23.2 mm
Mounted filter: OG1 / GG9
For microscopes: PZO Biolar FL and PZO MB-30 FL

Why are monocular microscope heads often used in fluorescence microscopy? Fluorescence microscopy (especially older designs) produces a relatively dark image, so it is beneficial for 100% of the light beam to reach a single eye. A binocular microscope head would split the light 50% to each eye, which could result in an image that is too dark.

The barrier fluorescence filter PZO OG1 / GG9 mounted under the microscope head protects the eyes from the harmful spectrum of fluorescence illumination.

Note - there is also a PZO GG9 fluorescence filter (also available in my catalog). It is important to select the correct filters for the appropriate applications.

The OG1 / GG9 filter is a separate element that can be detached from the microscope head. It is mounted under the microscope head in a dedicated slot provided for this purpose.

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: matte

Description of this part for the microscope.

in the terminology of PZO the name "MPI5" has two meanings, which causes some confusion:
- MPI5 is the name of a DIC microscope based on the PZO MB-30 stand, KPI-2 condenser and the DIC head model MPI3
- MPI5 is also the name of the latest DIC head that is part of the PZO UPI set (PL: Urzadzenie Polaryzacyjno-Interferencyjne)

Description of this part for the microscope.

eyepiece contains two lines in the field of view used for adjusting DIC interference fringes, but this is the only difference compared to an otherwise identical eyepiece used for adjusting phase contrast. Therefore it can be used:
- for adjusting DIC
- for adjusting phase contrast
- for observing the iris diaphragm
- for observing the filament when setting illumination according to the Köhler standard

This is one of those microscope elements for which many different names are used. Among others:
- phase telescope
- phase contrast telescope
- phase alignment telescope
- phase adjustment telescope
- phase centering telescope
- phase contrast centering telescope
- phase contrast alignment telescope
- phase contrast adjustment telescope
- centering telescope
- condenser centering telescope
- condenser alignment telescope
- condenser adjustment telescope
- alignment telescope
- adjustment telescope
- inspection telescope
- aperture viewing telescope
- back focal plane viewing telescope
- auxiliary microscope
- phase contrast auxiliary microscope
- alignment auxiliary microscope
- centering auxiliary microscope
- adjustment auxiliary microscope
- auxiliary telescope
- centering scope
- alignment scope
- phase scope
- phase viewer
- phase contrast viewer
- phase centering eyepiece
- phase contrast eyepiece
- phase alignment eyepiece
- phase telescope eyepiece
- centering eyepiece
- condenser centering eyepiece
- adjustment eyepiece
- inspection eyepiece

Description of this part for the microscope.

ring that allows correction of the vision defect of one eye and proper adjustment of image sharpness. The right eyepiece prism is integrated together with the tube.

Basic parameters:
- Type: tube with diopter correction ring
- Supported eyepiece diameter: 23.2 mm
- Included: right eyepiece prism
- For head model: PZO MND-6, both for models with black and with white housing.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Hinweis - this tube with prism DOES NOT FIT heads that were originally sold with PZO Studar microscopes, even though these heads look very similar. Of course if a head from the Biolar model was mounted on a Studar microscope (because it fits), then this tube will be compatible, because it is a repair element for the HEAD and not for a specific microscope model.

Description of this part for the microscope.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Description of this part for the microscope.

Supported eyepiece diameter: 23.2 mm
- Included: left eyepiece prism
- For head model: PZO MND-6, both for models with black and with white housing.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Hinweis - this tube with prism DOES NOT FIT heads that were originally sold with PZO Studar microscopes, even though these heads look very similar. Of course if a head from the Biolar model was mounted on a Studar microscope (because it fits), then this tube will be compatible, because it is a repair element for the HEAD and not for a specific microscope model.

Description of this part for the microscope.

microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

This part may be the answer to the following problems:
- scratched PZO head housing
- how to paint a PZO head?
- how to replace a PZO head cover?
- dropped Biolar head
- dented Biolar PZO head housing

Description of this part for the microscope.

thread

Fits condensers:
- PZO KPI-2 (Pluta / Nomarski DIC)
- PZO K4Ph (phase contrast Ph, PhA, PhS, A)
- PZO K3Ph (phase contrast Ph, PhA, PhS, A)
- PZO K3Ph1 (phase contrast Ph, PhA, PhS, A)
- PZO KFL (phase contrast / darkfield for fluorescence)
- PZO KFF
- PZO K3Phz (variable phase contrast Phz)

This upper lens allows conversion of the mounting standard from PZO 39.5 mm to the 37 mm standard and the use of PZO condensers on many other microscopes, e.g. Olympus BH / CH-2 or Lomo MBB

This microscope element can solve the following issues:
- How to mount PZO DIC on a Lomo microscope?
- Can I install a PZO DIC KPI2 condenser on an Olympus CH-2 microscope?
- Can I use PZO phase contrast on my non-PZO microscope?
- Does PZO phase contrast or DIC work on a microscope with a 37 mm condenser mount?

Description of this part for the microscope.

yes

This condenser fits microscopes from many manufacturers (e.g. Steindorff Berlin, Zeiss, Carl Zeiss Jena, Leitz, Kremp Wetzlar, Will Wetzlar and many others) with a condenser holder diameter of 39.5 mm.

Description of this part for the microscope.

10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).

Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).

VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.

Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.

It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

condenser fits microscopes from many manufacturers (e.g. Lomo, Carl Zeiss Jena, Olympus and many others) with a condenser holder diameter of 37 mm.

Description of this part for the microscope.

intended for so-called "thick" objectives
Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective

This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type.

For PZO objectives, it can accommodate all standard achromatic objectives as well as all phase contrast objectives. Some unusual PZO microscope objectives do not fit inside, for example the 100x PI objective (with a red ring).

Various names are used on the secondary market for a microscope objective case, including:
- objective case
- microscope objective case
- objective container
- microscope objective container
- objective storage case
- objective storage container
- objective box
- objective storage box
- protective objective case
- objective lens case
- objective lens container
- dust protection case
- transport case for microscope objectives
- microscope objective holder case
- storage canister for microscope objectives

Each case has the PZO logo on its cap. Caps may be black, white, or grey.

Although this case is of greatest interest to users and collectors of objectives made by the Polish manufacturer PZO, it can of course be used to store objectives from any manufacturer.

Description of this part for the microscope.

and serve two main purposes:
- they allow the user to comfortably rest their head against the eyepieces, reducing neck strain during prolonged microscope work (this is not possible with soft rubber eyecups)
- they block stray light entering from the sides, reducing reflections and improving image contrast

This offer includes 2 (two) pieces, i.e. one pair.

A few quick facts:
- these eyecups fit PZO eyepieces only
- these eyecups fit only PZO eyepieces with a mounting diameter of 23.2 mm
- these eyecups DO NOT FIT older PZO eyepieces with a knurled outer edge — an example of such eyepieces can be seen in the last gallery photograph
- the last gallery photograph shows an example of these eyecups installed on microscope eyepieces

Important: no dimensions are provided here. These eyecups fit only 23.2 mm microscope eyepieces manufactured by PZO (PZO Poland / PZO Warszawa). They do not fit microscope eyepieces made by other manufacturers. If a microscope made by another manufacturer (e.g. Lomo Biolam) uses PZO eyepieces, these eyecups will fit. If a PZO microscope (e.g. PZO Biolar) uses eyepieces made by another manufacturer (e.g. Carl Zeiss Jena), these eyecups will not fit even though the microscope itself is made by PZO. These eyecups fit the eyepieces — not a specific microscope.

Description of this part for the microscope.

10x
Correction: Achromat
Numerical aperture N.A.: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: not required, but may be used
Immersion: no
Thread: RMS
Info: Ph = Zernike phase contrast (green ring).

Compatible with the following phase contrast condensers:
- PZO K4Ph
- PZO K3Ph
- PZO K3Ph1
- PZO KS
- PZO KFF 2
- PZO KFL
- and even PZO K3PhZ

Here https://www.facebook.com/photo/?fbid=1262188377207557&set=a.462747092529893 you can see a very interesting test. It shows that if you use this PZO objective with the green ring (i.e. Zernike phase contrast) together with light-polarizing condensers (i.e. PZO KS or PZO K3PhZ), you will obtain an interesting blue background effect.

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must support RMS objectives, TL=160 mm and FL=45 mm.

Description of this part for the microscope.

Achromat
Numerical aperture N.A.: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: not required, but may be used
Immersion: no
Thread: RMS
Info: PhZ = variable phase contrast (white ring).

PZO PhZ objectives, designed for variable phase contrast, are intended to be used together with the PZO K3PhZ phase contrast condenser equipped with a rotating polarizer.

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must support RMS objectives with a tube length of 160 mm and a focal length of 45 mm.

Description of this part for the microscope.

Achromat
Numerical aperture N.A.: 0.4
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: PhZ = variable phase contrast (white ring).

PZO PhZ objectives, designed for variable phase contrast, are intended to be used together with the PZO K3PhZ phase contrast condenser equipped with a rotating polarizer.

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must support RMS objectives with a tube length of 160 mm and a focal length of 45 mm.

Description of this part for the microscope.

Achromat
Numerical aperture N.A.: 1,3
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: PhZ = variable phase contrast (white ring).

PZO PhZ objectives, designed for variable phase contrast, are intended to be used together with the PZO K3PhZ phase contrast condenser equipped with a rotating polarizer.

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must support RMS objectives with a tube length of 160 mm and a focal length of 45 mm.