|
|
SERMIK_ID number under which this microscope part is placed in the database.
99320
|
Zeiss ID 02 inverted microscope Ph1 10/0,22 160/- PN 46 04 01 - 9904 phase contrast microscope objective (460401)
|
|
Description of this part for the microscope.
Microscope objective Zeiss for phase contrast.
Basic parameters:
Manufacturer: Zeiss
Designation: 10/0,22 160/-
Manufacturer number: 46 04 01 -
...
9904
Magnification: 10x
Correction: achromat
Numerical aperture: 0.22
Tube length: 160 mm
Focal length: 45 mm
Cover glass: indifferent
Immersion: no
Thread: RMS
Ph1: phase contrast
This specific unit was used in an inverted Zeiss ID 02 microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes.
Objectives with such low magnification (here 10x) can be used without a cover glass, with a cover glass, or for observation through thicker glass (e.g. through a Petri dish), therefore they can be used both in upright and inverted microscopes.
It can be used with any microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss ID 02 microscope repair parts
- Carl Zeiss ID-02 Phasenkontrast Mikroskopobjektiv
- Carl Zeiss Axiovert phase contrast microscope objective
- Carl Zeiss Phasenkontrast-Mikroskop
- Zeiss inverses Mikroskop
- Carl Zeiss ID 03 Phasenkontrast Kondensor
- Zeiss Standard GFL Mikroskopobjektiv
- Zeiss Universal Phasenkontrast
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
99 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
ID 02
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99386
|
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization
This is an objective designed for transmitted light work with a cover glass.
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a polarisation microscope and need an objective lens with this magnification
-
If you only need a slider to use with other objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99387
|
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 9:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99385
|
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 3
- 7:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91005
|
Hertel & Reuss Labopan / Superpan 100/1,30 Oel microscope objective RMS, DIN 45mm
|
|
Description of this part for the microscope.
Very rare 100x microscope objective with a 45 mm focal length.
Manufacturer: Hertel & Reuss
Magnification: 100x
Numerical aperture: 1.30
Cover glass: yes,
...
0.17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: yes, oil immersion
Thread: RMS
Only towards the end of its operations did Hertel & Reuss begin producing microscopes with objectives having a 45 mm focal length. These were the Hertel & Reuss Labopan and Superpan models. Previously, microscopes from this company used objectives with a 37 mm focal length.
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives with TL=160 mm. Several examples of such microscopes are listed in the „Compatibility“ section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Hertel & Reuss Labopan microscope repair parts
- Hertel & Reuss Superpan microscope objective
- Hertel & Reuss Labopan microscope objective
- Hertel & Reuss Superpan Mikroskopobjektiv
- Hertel & Reuss Labopan Mikroskop Objektiv
- Hertel und Reuss Immersionobjektiv
- Hertel & Reuss Mikroskop 1000-fache Vergrößerung
- Hertel & Reuss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Hertel & Reuss
Hertel & Reuss Kassel (West Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Labopan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Hertel & Reuss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Hertel & Reuss microscope without a 100x objective and want to complete it with original parts
-
if you are looking for a good-quality 100x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such a rare objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91011
|
Hund H600 / Wilovert A4/0.10 160/- RMS microscope objective 4x achromatic
|
|
Description of this part for the microscope.
Achromatic microscope objective by Hund Wetzlar.
Manufacturer: Hund Wetzlar
Magnification: 4x
Model: A 4/0.10 160/-
Numerical aperture N.A.: 0.
...
10
Cover glass: not required
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no (dry objective)
Thread: RMS
This objective can be used both:
- with biological microscopes using transmitted-light illumination
- with inverted microscopes
- with microscopes with reflected-light illumination
- for macro photography by directly connecting it to a camera
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives for TL=160 mm. Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.
Several facts are worth emphasizing:
- many Hund Wetzlar microscope models are identical to models sold by Will Wetzlar due to their joint production. For example, the BX300 and Wilovert models even have the same name. Therefore, Hund Wetzlar microscope objectives can also be used with Will Wetzlar microscopes.
- the companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel and Kosmos Stuttgart also used Will Wetzlar objectives, so Hund Wetzlar microscope objectives can also be used with microscopes from these manufacturers – but it is worth checking the focal length first (37 mm or 45 mm)
- objectives with magnifications below 16x (e.g. 4x / 5x or 10x) fit both classic biological microscopes, microscopes with reflected-light illuminators and inverted microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Hund H600 microscope repair parts
- Hund H600 / Wilovert microscope objective
- Hund Wetzlar H500 / C300 microscope objective
- Hund H600 Mikroskopobjektiv
- Hund Wetzlar Wilovert Mikroskop Objektiv
- Hund Wetzlar Mikroskop 4-fache Vergrößerung
- Will Wetzlar BX300 Mikroskop Objektiv
- Hund Fungiscope microscope objective
- Will Wetzlar V365 Mikroskop Objektiv
- Hund buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Hund
Hund Wetzlar GmbH
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
H600
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Hund)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Hund Wetzlar microscope without a 4x / 5x objective and want to complete it with original parts
-
if you are looking for a good-quality 4x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such a rare objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91012
|
Hund H600 / Wilovert A10/0.25 160/- RMS microscope objective 10x achromatic
|
|
Description of this part for the microscope.
Achromatic microscope objective by Hund Wetzlar.
Manufacturer: Hund Wetzlar
Magnification: 10x
Model: A 10/0.25 160/-
Numerical aperture N.A.: 0.
...
25
Cover glass: not required
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no (dry objective)
Thread: RMS
This objective can be used both:
- with biological microscopes using transmitted-light illumination
- with inverted microscopes
- with microscopes with reflected-light illumination
- for macro photography by directly connecting it to a camera
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives for TL=160 mm. Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.
Several facts are worth emphasizing:
- many Hund Wetzlar microscope models are identical to models sold by Will Wetzlar due to their joint production. For example, the BX300 and Wilovert models even have the same name. Therefore, Hund Wetzlar microscope objectives can also be used with Will Wetzlar microscopes.
- the companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel and Kosmos Stuttgart also used Will Wetzlar objectives, so Hund Wetzlar microscope objectives can also be used with microscopes from these manufacturers – but it is worth checking the focal length first (37 mm or 45 mm)
- objectives with magnifications below 16x (e.g. 4x / 5x or 10x) fit both classic biological microscopes, microscopes with reflected-light illuminators and inverted microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Hund H600 microscope repair parts
- Hund H600 / Wilovert microscope objective
- Hund Wetzlar H500 / C300 microscope objective
- Hund H600 Mikroskopobjektiv
- Hund Wetzlar Wilovert Mikroskop Objektiv
- Hund Wetzlar Mikroskop 10-fache Vergrößerung
- Will Wetzlar BX300 Mikroskop Objektiv
- Hund Fungiscope microscope objective
- Will Wetzlar V365 Mikroskop Objektiv
- Hund buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Hund
Hund Wetzlar GmbH
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
H600
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Hund)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Hund Wetzlar microscope without a 10x objective and want to complete it with original parts
-
if you are looking for a good-quality 10x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such a rare objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91013
|
Hund H600 / C300 A40/0.65 160/0,17 RMS microscope objective 40x achromatic
|
|
Description of this part for the microscope.
Achromatic microscope objective by Hund Wetzlar.
Manufacturer: Hund Wetzlar
Magnification: 40x
Model: A 40/0.65 160/0,17
Numerical aperture N.A.: 0.
...
65
Cover glass: yes, 0,17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no (dry objective)
Thread: RMS
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives for TL=160 mm. Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.
- many Hund Wetzlar microscope models are identical to models sold by Will Wetzlar due to their joint production. For example, the BX300 and Wilovert models even have the same name. Therefore, Hund Wetzlar microscope objectives can also be used with Will Wetzlar microscopes.
- the companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel and Kosmos Stuttgart also used Will Wetzlar objectives, so Hund Wetzlar microscope objectives can also be used with microscopes from these manufacturers – but it is worth checking the focal length first (37 mm or 45 mm)
Names, descriptions, terms, and search contexts under which this part is searched.
- Hund H600 microscope repair parts
- Hund H600 / C300 microscope objective
- Hund Wetzlar H500 / S200 microscope objective
- Hund H600 Mikroskopobjektiv
- Hund Wetzlar Wilovert Mikroskop Objektiv
- Hund Wetzlar Mikroskop 40-fache Vergrößerung
- Will Wetzlar BX300 Mikroskop Objektiv
- Hund Fungiscope microscope objective
- Will Wetzlar V365 Mikroskop Objektiv
- Hund buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Hund
Hund Wetzlar GmbH
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
H600
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Hund)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Hund Wetzlar microscope without a 40x objective and want to complete it with original parts
-
if you are looking for a good-quality 40x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such a rare objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91020
|
Zeiss KM / KF2 microscope Ph2 40/0,65 160/0,17 PN 460701-9903 phase contrast microscope objective 40x
|
|
Description of this part for the microscope.
Carl Zeiss (West Germany) microscope objective for phase contrast.
Basic parameters:
Manufacturer: Zeiss
Designation: Ph2 40/0.65 160/0.17
Manufacturer's
...
number: 46 07 01 - 9903
Magnification: 40x
Correction: achromatic
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: no
Thread: RMS
Ph2: phase contrast
This particular specimen was used in a Zeiss KM microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes. It fits many microscope models from this manufacturer; some examples are listed in the "compatibility" section.
It can be used with any microscope from any manufacturer together with a suitable phase-contrast condenser (or a phase-ring slider). Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss KM microscope repair parts
- Carl Zeiss KM / Standard Phasenkontrast Mikroskopobjektiv
- Carl Zeiss Universal phase contrast microscope objective
- Carl Zeiss Phasenkontrast-Mikroskop
- Zeiss Photomicroscope Phasenkontrast
- Carl Zeiss KF2 Phasenkontrast Kondensor
- Zeiss Standard GFL Mikroskop Objektiv
- Zeiss Phomi Phasenkontrast
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
KM
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91014
|
Hund H600 / C300 A100/1.25 Oel 160/0.17 RMS microscope objective 100x oil immersion achromatic
|
|
Description of this part for the microscope.
Achromatic microscope objective by Hund Wetzlar.
Manufacturer: Hund Wetzlar
Magnification: 100x
Model: A 100/1.25 Oel 160/0.17
Numerical aperture N.A.: 1.
...
25
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: yes, oil immersion
Thread: RMS
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives for TL=160 mm. Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.
- many Hund Wetzlar microscope models are identical to models sold by Will Wetzlar due to their joint production. For example, the BX300 and Wilovert models even have the same name. Therefore, Hund Wetzlar microscope objectives can also be used with Will Wetzlar microscopes.
- the companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel and Kosmos Stuttgart also used Will Wetzlar objectives, so Hund Wetzlar microscope objectives can also be used with microscopes from these manufacturers – but it is worth checking the focal length first (37 mm or 45 mm)
Names, descriptions, terms, and search contexts under which this part is searched.
- Hund H600 microscope repair parts
- Hund H600 / C300 microscope objective
- Hund Wetzlar H500 / S200 oil immersion microscope objective
- Hund H600 Mikroskopobjektiv
- Hund Wetzlar Mikroskop 100-fache Vergrößerung mit Ölimmersion
- Will Wetzlar BX300 Mikroskop Objektiv
- Hund Fungiscope microscope objective
- Will Wetzlar V365 Mikroskop Objektiv
- Hund buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Hund
Hund Wetzlar GmbH
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
H600
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Hund)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Hund Wetzlar microscope without a 100x objective and want to complete it with original parts
-
if you are looking for a good-quality 100x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such a rare objective in reserve
|
|
