Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

(under the Bresser Biolam brand). As far as I know, they also fit the Lomo MBB-1a and Lomo MIN-8 cases.

Description of this part for the microscope.

Description of this part for the microscope.

Description of this part for the microscope.

Description of this part for the microscope.

state.

Of course, the oil is usable, but I think this item has more collector's value.

Description of this part for the microscope.

"larger" circle with mirror filters that is built into the head.

Installed filters:
- yellow
- red
- green
- blue
- empty slot

Description of this part for the microscope.

condition and perfect optical condition. It's difficult to find a lens in this condition on the used market.

Manufacturer: Lomo
Magnification: 40x
Model: 40 0.65 P
Numerical Aperture: 0.65
Tube: 160 mm
Focal Length: 33 mm
Cover Glass: Yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This objective is designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a suitable insert, allowing it to be used with Lomo Polam, Lomo MIN-1 / Lomo MIN-6 / Lomo MIN-8 microscopes. Of course, the objective can be unscrewed and a different objective screwed into the insert.

The Pol adapter also allows you to center the objective lens along the entire optical path - but this requires tools.

Note: I've seen numerous reports claiming this RMS-Pol adapter is compatible with Leitz Wetzlar polarizing microscopes - but I haven't personally verified it.

Description of this part for the microscope.

also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

but I understand it also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

MIN-8 polarizing microscope. A very similar component is found in the Lomo MBB-1 model, but it is threaded instead of attached with screws. However, it can be adapted, so I consider it compatible with that model.

Description of this part for the microscope.

it a single-objective non-revolving nosepiece.

Description of this part for the microscope.

MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

Description of this part for the microscope.

microscopes:
- biological microscope LOMO MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

Description of this part for the microscope.

second-hand market.

Manufacturer: Lomo
Magnification: 95x
Model: MI 95x 1,25 190-P
Numerical Aperture: 1,25
Tube length: 190 mm
Focal length: (?)
Cover slip: yes, 0,17 mm (?)
Thread: RMS + Pol adapter
Marking: "P" = Polarization
Marking: "MI" = Oil immersion

This objective is for use with transmitted or reflected light with a cover slip (although I am not sure if it definitely requires a cover slip).

This specific item was used with the Lomo Polam P-312 microscope, i.e., with an EPI reflected light illuminator.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

and focusing is achieved by raising or lowering the microscope stage. This is the opposite of how it works, for example, in the Lomo Biolam model, where the arm moves up and down.

Along this rack gear offered here, the entire assembly of the microscope stage holder and the condenser is moved. This assembly is driven by a gear wheel mounted on a shaft located between the coarse focus knobs.

This is an original brass rack gear, not a plastic 3D print. The set includes two mounting screws (the upper and lower ones differ from each other).

Description of this part for the microscope.

integrated gear wheel for adjusting the condenser height. This is the element on which the rack moves.
The condenser holder is mounted directly on this element.

The rack is not included.

Description of this part for the microscope.

1 biological microscope

Note - Lomo MBI-1, MBR-3 or Lomo Biolam microscopes use a DIFFERENT rack gear for the condenser movement mechanism.

This is not a 3D print - it is an original brass microscope element manufactured by Lomo and removed from a MIN-8 microscope.

Description of this part for the microscope.

MIN-8 polarizing microscope. A very similar component is found in the Lomo MBB-1 model, but it is threaded instead of attached with screws. However, it can be adapted, so I consider it compatible with that model.

Description of this part for the microscope.

polarizing microscope LOMO MIN-8

Description of this part for the microscope.

This insert fits condensers used in the following Lomo microscopes:
- Polam (all models)
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 35 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

condensers used in the following Lomo microscopes:
- Polam
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 26 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

Note - this is the version without an iris diaphragm.

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

differences between the Lomo MIN-8 and MBB-1A microscopes is the position of the light beam collimating lens:
- in the Lomo MBB-1A microscope this lens is normally located below the Abbe condenser
- in the Lomo MIN-8 microscope this lens is located in the base, in the light path directly behind the field diaphragm

Here I present and offer the complete mechanism for mounting and moving this lens:
- lens in housing
- rod on which the lens is mounted
- holder allowing movement of the lens
- mounting screws

This lens is used to shape the light beam so that the specimen is evenly illuminated at low magnifications.

Description of this part for the microscope.

length: (?)
Cover slip: no
Thread: RMS + Pol adapter

This objective is for use with transmitted or reflected light.

This specific item was used with the Lomo MOIN-6 microscope.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MPD-1 / Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This is an objective designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a phase contrast diaphragm (phase annulus). The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a phase contrast diaphragm (phase annulus). The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a special diaphragm with a small light aperture. The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

although incorrectly, referred to as "Lomo")
Model: 20 0,40
Magnification: 20x
Correction: Achromat
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: 0.17 mm
Immersion: no
Thread: RMS
Serial number: 01234

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=33 mm.

After installing a 12 mm adapter, this combination of adapter and objective will function as an objective with FL=45 mm.

This objective is attractive mainly to collectors because:
- there are very few microscope objectives with the LZOS logo on the secondary market
- the objective has a so-called "golden serial number": 01234

Description of this part for the microscope.

with the Lomo Polam polarizing microscope. The set included phase contrast diaphragms and dark field diaphragms. Here I present and offer a complete set.

Important note:
Such diaphragms in a special holder were supplied as a set of five diaphragms as an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser to obtain a combination of these techniques and a phase image in polarized light. Please note that the same condensers can also be used in polarizing microscopes of the Lomo MIN series (for example Lomo MIN-6 or Lomo MIN-8 models) and in microscopes designed for infrared light work from the Lomo MIK series (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase rings in those microscopes as well.

The latest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already features a dedicated rotating polarizing phase condenser (somewhat similar to the Lomo KF-4 condenser).

The last photo in the gallery shows a page from the Lomo Polam microscope manual where this microscope part is presented. In the manual it is shown in figure number 6, item number 65.

If you have such a set but it is incomplete - browse this database - you will also find individual diaphragms offered separately - specifically to solve such situations.

Description of this part for the microscope.

ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no - this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976

This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.

The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.

Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.

Description of this part for the microscope.

220V - 240V
Output: 8V
Output power: 20W
Power plug: European flat plug
Potentiometer: yes, smooth brightness adjustment

Designed for:
- Lomo OI-21 illuminator
- Lomo OI-35 illuminator
- illuminator used with MBC-9 and MBC-10 stereo microscopes

Also compatible with older black Lomo microscopes:
- MBB-1
- MIN-8
- EPI reflected-light illuminators, including those used with the Lomo METAM and Lomo MMU-3
- and many others

Some older Lomo microscopes (for example, the MBC-1 and MBC-2 stereo microscopes) may use different connectors, but they use the same Lomo 8V 20W BA15d lamps.

Description of this part for the microscope.

objective:
Manufacturer: LOMO, Russia (ЛОМО)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "89"
Year of manufacture: 1989
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "80"
Year of manufacture: 1980
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "79"
Year of manufacture: 1979
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "75"
Year of manufacture: 1975
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "93"
Year of manufacture: 1993
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "85"
Year of manufacture: 1985
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "74"
Year of manufacture: 1974
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "72"
Year of manufacture: 1972
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "86"
Year of manufacture: 1986
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "66"
Year of manufacture: 1966
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

The LOMO 8x objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

(ЛОМО)
Version: this is the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 90x
Correction: achromatic
Marking on the objective: A 90*1.25
Numerical aperture N.A.: 1.25
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.

Apart from the missing manufacturer name, the export version also differs in the way the parameters are marked. On the LOMO version the marking read "МИ 90 1.25", where "МИ" is an abbreviation written in Cyrillic, corresponding to "MI" and meaning "oil immersion". The export version dropped the Cyrillic (and even the immersion information), and the marking changed to "A 90*1.25".

A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.