Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
138 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ph HI 90 1.25 phase contrast microscope objective with 90x magnification - thumbnail [ 00548 ]	SERMIK_ID number under which this microscope part is placed in the database. 00548	Carl Zeiss Jena Ph HI 90 1,25 Phase Contrast microscope objective (Phasenkontrast 90x)	The name of this microscope part. Carl Zeiss Jena Ph HI 90 1.25 phase contrast microscope objective with 90x magnification	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Ph HI 90 1.25 Magnification: 90x Correction: Achromat Numerical Aperture: 1.25 Tube Length: 160 mm Focal Length: ... 33 mm Cover Glass: 0.17 mm Immersion: Yes, oil immersion Thread: RMS Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast. This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective lens of this quality on the used parts market. It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Mikroskop Objektiv obiektyw mikroskopowy lens glass soczewka microscope objective kontrast fazowy Phase Contrast Phasen Kontrast Phasenkontrast Ph Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NfPk Ng	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	0000-00-00 00:00:00
174 - Thumbnail photo showing this microscope part. FOZ Opta RMS 8x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes - thumbnail [ 00639 ]	SERMIK_ID number under which this microscope part is placed in the database. 00639	FOZ "Lomo" 8x microscope objective (Lomo Biolam / Opta UM-301)	The name of this microscope part. RMS 8x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes	Description of this part for the microscope. RMS Microscope Objective with 8x Magnification Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union) Magnification: 8x Tube ... Length: 160 mm Focal Length: 33 mm Thread: RMS This objective was manufactured for microscopes: - Junat-1P - OPTA UShM-1 - Opta UM-301 but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO. Names, descriptions, terms, and search contexts under which this part is searched. FOZ Opta Opta UM-301 microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Opta Junat-P1 Opta Ushm-1 Opta UM-301 objective Objektiv obiektyw FOZ Opta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. FOZ Opta Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Opta UM-301 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (FOZ Opta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Junat-2P-1 UShM-1 Opta UM-301 Lu Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your Opta microscope with original parts If you need an 8x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses This is a very good lens for macro photography (photo stacking)	0000-00-00 00:00:00
175 - Thumbnail photo showing this microscope part. FOZ Opta RMS 20x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes - thumbnail [ 00638 ]	SERMIK_ID number under which this microscope part is placed in the database. 00638	FOZ "Lomo" 20x microscope objective (Lomo Biolam / Opta UM-301)	The name of this microscope part. RMS 20x microscope objective for Lomo Bolam, Opta Junat-P1, Opta UM-301 or Opta Ushm-1 microscopes	Description of this part for the microscope. RMS Microscope Objective with 20x Magnification Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union) Magnification: ... 20x Tube Length: 160 mm Focal Length: 33 mm Thread: RMS This objective was manufactured for microscopes: - Junat-1P - OPTA UShM-1 - Opta UM-301 but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO. Names, descriptions, terms, and search contexts under which this part is searched. FOZ Opta Opta UM-301 microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Opta Junat-P1 Opta Ushm-1 Opta UM-301 objective Objektiv obiektyw FOZ Opta buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. FOZ Opta Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Opta UM-301 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (FOZ Opta) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Junat-2P-1 UShM-1 Opta UM-301 Lu Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your Opta microscope with original parts If you need an 20x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses	0000-00-00 00:00:00
183 - Thumbnail photo showing this microscope part. IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg) - thumbnail [ 00633 ]	SERMIK_ID number under which this microscope part is placed in the database. 00633	IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg)	The name of this microscope part. IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg)	Description of this part for the microscope. RMS microscope objective with 10x magnification. Manufacturer: IOR Bucuresti (Romania) Magnification: 10x Numerical aperture: 0.30 Tube length: 160 ... mm Focal length: 33 mm Thread: RMS This objective is an exact replica of the identical Carl Zeiss Jena objective. Names, descriptions, terms, and search contexts under which this part is searched. IOR ML-4M microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Lg IOR ML-4M objective Objektiv obiektyw IOR buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 29 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. IOR Intreprinderea Optică Română (IOR)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-4M Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (IOR) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-4M Lg Lumipan MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your IOR microscope with original parts If you need an 10x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses	0000-00-00 00:00:00
192 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Ph 20 0,40 phase contrast microscope objective with 20x magnification - thumbnail [ 00643 ]	SERMIK_ID number under which this microscope part is placed in the database. 00643	Carl Zeiss Jena Ph 20 0,40 Phase Contrast microscope objective (Phasenkontrast 20x)	The name of this microscope part. Carl Zeiss Jena Ph 20 0,40 phase contrast microscope objective with 20x magnification	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: Ph 20 0,40 Magnification: 20x Correction: Achromat Numerical Aperture: 0,40 Tube Length: 160 mm Focal Length: 33 ... mm Cover Glass: 0.17 mm Immersion: no Thread: RMS Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast. It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Mikroskop Objektiv obiektyw mikroskopowy lens glass soczewka microscope objective kontrast fazowy Phase Contrast Phasen Kontrast Phasenkontrast Ph 20x RMS Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Nf NfPk Ng	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	0000-00-00 00:00:00
230 - Thumbnail photo showing this microscope part. Lomo 10 0.30 microscope objective (10x Lomo Biolam, Carl Zeiss Jena Lg), 1976 - thumbnail [ 00679 ]	SERMIK_ID number under which this microscope part is placed in the database. 00679	Lomo 10 0.30 microscope objective 1976 (10x Lomo Biolam, Carl Zeiss Jena Lg)	The name of this microscope part. Lomo 10 0.30 microscope objective (10x Lomo Biolam, Carl Zeiss Jena Lg), 1976	Description of this part for the microscope. RMS microscope objective with 10x magnification. Manufacturer: Lomo Magnification: 10x Numerical aperture: 0.30 Tube length: 160 mm Focal length: 33 ... mm Thread: RMS YOM: 1976 This lens was produced as an OEM for many vendors. It can be found without any manufacturer name (commonly found on Bresser Biolam microscopes), or with the "BoB" or "Fujiopt Tokyo" logo engraved on it. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Lg IOR ML-4M 10x objective 10-fach Objektiv obiektyw Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam ML-4M Lg Lumipan MBB-1 Biolam D11	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need an 10x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses if you have a Lomo microscope from 1976 (the serial number starts with "76") and you want to have "period" lenses in it.	0000-00-00 00:00:00
231 - Thumbnail photo showing this microscope part. Lomo 3,7 0,11 microscope objective, Lomo 3,7x RMS macro photo objective, close-up lens, macro stacking, macro photography, Lomo Biolam Mikroskopobjektiv, Bresser Biolam Mikroskop Objektiv - thumbnail [ 00678 ]	SERMIK_ID number under which this microscope part is placed in the database. 00678	Lomo 3,7 0,11 microscope objective, Lomo 3,7x RMS macro photo objective, close-up lens, macro stacking, macro photography, Lomo Biolam Mikroskopobjektiv, Bresser Biolam Mikroskop Objektiv	The name of this microscope part. Lomo 3,7 0,11 microscope objective, Lomo 3,7x RMS macro photo objective, close-up lens, macro stacking, macro photography, Lomo Biolam Mikroskopobjektiv, ... Bresser Biolam Mikroskop Objektiv	Description of this part for the microscope. RMS microscope objective with 3.7x magnification. Manufacturer: Lomo Version: OEM - without manufacturer's name engraved - the latest export version for ... Bresser Biolam microscopes Magnification: 3.7x Numerical Aperture: 0.11 Tube Length: 160 mm Focal Length: 33 mm Thread: RMS Due to its superior optical quality, this objective is used for macro photography, especially for stacking images. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Lg 3 7x objective 3 7-fach Objektiv obiektyw macro photo objective close-up lens macro stacking macro photography Makro-foto-objektiv Nahaufnahmelinse Makro-Photo-Stacking Makrofotografie super makro foto stacking zdjęć makrofotografia Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam ML-4M Lg Lumipan MBB-1 Biolam D11	A list of potential uses for this part and when it might be needed. Primarily if you're looking for a reasonably priced, high-quality lens for macro photography If you want to upgrade your Bresser or Lomo microscope with original parts If you need a low-power lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm parameters	0000-00-00 00:00:00
301 - Thumbnail photo showing this microscope part. Lomo 8 0.20 microscope objective (RMS 8x / 1985) - thumbnail [ 00740 ]	SERMIK_ID number under which this microscope part is placed in the database. 00740	Lomo 8 0.20 microscope objective (RMS 8x / 1985)	The name of this microscope part. Lomo 8 0.20 microscope objective (RMS 8x / 1985)	Description of this part for the microscope. RMS microscope objective with 8x magnification. Manufacturer: Lomo Magnification: 8x Numerical aperture: 0.20 Tube length: 160 mm Focal length: 33 ... mm Thread: RMS YOM: 1985 Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Lg IOR ML-4M 8x objective 8-fach Objektiv obiektyw Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 24 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam Biolam D11 Lomo MBI-1 Lomo MBR-3 ML-4M Lg Lumipan MBB-1	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need an 8x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses if you have a Lomo microscope from 1985 (the serial number starts with "85") and you want to have "period" lenses in it.	0000-00-00 00:00:00
302 - Thumbnail photo showing this microscope part. Lomo WI 40 0.75 microscope objective (water immersion, RMS 40x / 1991) - thumbnail [ 90736 ]	SERMIK_ID number under which this microscope part is placed in the database. 90736	Lomo WI 40 0.75 microscope objective (water immersion, RMS 40x / 1991)	The name of this microscope part. Lomo WI 40 0.75 microscope objective (water immersion, RMS 40x / 1991)	Description of this part for the microscope. 40x RMS microscope objective lens with increased numerical aperture and water immersion. Manufacturer: Lomo Model: WI 40 0.75 Magnification: ... 40x Numerical aperture: 0.75 Tube length: 160 mm Focal length: 33 mm Immersion: yes, water immersion Thread: RMS YOM: 1991 Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Carl Zeiss Jena Lg IOR ML-4M Lomo 40x objective Lomo 40-fach Objektiv obiektyw wasser immersion water immersion immersja wodna BN WI Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam Biolam D11 MBI-1 MBR-3 ML-4M Lg Lumipan MBB-1 ML-2	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need a 40x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses If you have a Lomo microscope from 1991 (the serial number begins with "91") and want original-era objectives If you don't like oil immersion but want better image quality than standard, dry 40x objectives	0000-00-00 00:00:00
303 - Thumbnail photo showing this microscope part. Lomo PLAN 9x 0.20 microscope objective (RMS / 1991) - thumbnail [ 90737 ]	SERMIK_ID number under which this microscope part is placed in the database. 90737	Lomo PLAN 9x 0.20 microscope objective (RMS / 1991)	The name of this microscope part. Lomo PLAN 9x 0.20 microscope objective (RMS / 1991)	Description of this part for the microscope. RMS microscope objective with 9x magnification and plan achromatic correction. Manufacturer: Lomo Model: PLAN 9x0.20 Magnification: 9x Correction: Plan ... Achromat Numerical Aperture: 0.20 Tube Length: 160 mm Focal Length: 33 mm Immersion: No Thread: RMS YOM: 1991 NOTE - Although this is a plan achromatic objective, it does not require dedicated plan compensation optics (e.g., special eyepieces). This makes it very popular for macro photography ? it has a 9:1 magnification ratio, no distortion at the image edge, and operates in direct projection mode. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Carl Zeiss Jena Lg IOR ML-4M Lomo Plan 9x objective Lomo Plan 9-fach Objektiv obiektyw plan achromat macrophotography super makro stackowanie zdjęć Lomo 9 Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam Biolam D11 Lomo MBI-1 Lomo MBR-3 ML-4M Lg Lumipan MBB-1	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need a 9x objective lens for a flat image for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses If you have a Lomo microscope from 1991 (the serial number begins with "91") and want lenses from that era If you're looking for an interesting lens for macro photography and photo stacking.	0000-00-00 00:00:00
334 - Thumbnail photo showing this microscope part. PZO 20/0,40 PhA Anoptral phase contrast microscope objective 20x - thumbnail [ 00760 ]	SERMIK_ID number under which this microscope part is placed in the database. 00760	PZO 20/0,40 PhA Anoptral Phase Contrast microscope objective 20x	The name of this microscope part. PZO 20/0,40 PhA Anoptral phase contrast microscope objective 20x	Description of this part for the microscope. Manufacturer: PZO Poland Model: 20/0,40 PhA Magnification: 20x Correction: Achromat Numerical Aperture: 0,40 Tube Length: 160 mm Focal Length: 33 ... mm Cover Glass: 0.17 mm Immersion: no Thread: RMS Info: PhA = negative (anoptral) phase contrast (yellow bar). Fits the following PZO phase contrast condensers: - K4Ph - K3Ph - K3Ph1 - KS - KFF 2 - KFL This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market. It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-10 microscope repair parts Mikroskop Objektiv obiektyw mikroskopowy lens glass soczewka microscope objective kontrast fazowy Phase Contrast Phasen Kontrast Phasenkontrast Ph pzo PhA PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-10 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1) MB-10 MBB-1 Biolam M-9 ML-4M	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-01-19 00:00:00
420 - Thumbnail photo showing this microscope part. Lomo WI 40 0.75 L microscope objective (fluorescence water immersion, RMS 40x / 1974) - thumbnail [ 00867 ]	SERMIK_ID number under which this microscope part is placed in the database. 00867	Lomo WI 40 0.75 L microscope objective (fluorescence water immersion, RMS 40x / 1974)	The name of this microscope part. Lomo WI 40 0.75 L microscope objective (fluorescence water immersion, RMS 40x / 1974)	Description of this part for the microscope. Microscope objective with RMS thread and 40x magnification, featuring increased numerical aperture, designed for water immersion and optimized optical correction for ... fluorescence illumination. Manufacturer: LOMO Model: WI 40 0.75 L Magnification: 40x Numerical aperture: 0.75 Optical correction: achromat, optimized for fluorescence microscopy Tube length: 160 mm Focal length: approx. 33 mm Immersion: water Designation: L = luminescence Thread: RMS Year of manufacture: 1974 Despite the L designation, the objective can of course also be used with standard transmitted light illumination. LOMO objectives marked with L luminescence differ from non-marked versions by: - improved transmission in the UV and blue spectral range - reduced autofluorescence of optical glass - no or strongly reduced use of organic adhesives in the optical assembly Names, descriptions, terms, and search contexts under which this part is searched. Lomo ML-2 microscope repair parts mikroskop microscope Lomo Biolam Bresser Biolam Carl Zeiss Jena Lumipan Carl Zeiss Jena Lg IOR ML-4M Lomo 40x objective Lomo 40-fach Objektiv obiektyw wasser immersion water immersion immersja wodna BN WI fluoresnencja fluorescence luminescence fluoreszenz limineszenz. Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-2 Biolam Biolam D11 MBI-1 MBR-3 ML-4M Lg Lumipan MBB-1	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need a 40x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives If you don't like oil immersion but want better image quality than standard, dry 40x objectives	2026-01-30 00:00:00
421 - Thumbnail photo showing this microscope part. Lomo WI 30x 0,90 L microscope objective (fluorescence water immersion, iris RMS 30x / 1974) - thumbnail [ 00869 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00869	Lomo WI 30x 0,90 L microscope objective (fluorescence water immersion, iris RMS 30x / 1974)	The name of this microscope part. Lomo WI 30x 0,90 L microscope objective (fluorescence water immersion, iris RMS 30x / 1974)	Description of this part for the microscope. Microscope objective with RMS thread, 30x magnification, very high, variable numerical aperture, built-in iris diaphragm, designed for water immersion and improved ... correction for fluorescence illumination. Manufacturer: Lomo Model: WI 30x0.90 L Manufacturer code: O5V-30L Magnification: 30x Numerical aperture: variable from 0.65 to 0.90 Iris diaphragm: yes, built-in Optical correction: achromat + fluorescence Tube length: 160 mm Focal length: 33 mm Immersion: yes, water Cover glass: yes, 0.17 mm Marking: "L" = luminescence Thread: RMS Year of manuractue: 1974 This is a rare, professional microscope objective with a very wide range of applications. Main features that make this objective exceptional: - Water immersion is preferred by many users over oil immersion - Very high numerical aperture (up to 0.90) provides high-resolution images - Built-in iris diaphragm allows adjustment of the aperture Despite the "L" marking, the objective can of course also be used with standard illumination. LOMO objectives with the "L" luminescence marking differ from those without this symbol by: - Improved transmission in the UV and blue spectral range - Lower glass autofluorescence - No or strongly reduced use of organic adhesives Names, descriptions, terms, and search contexts under which this part is searched. Lomo ML-2 microscope repair parts Lomo ML-2 luminescence microscope objective Lomo ML-2 Lumineszenz Mikroskopobjektiv Lomo ML-2 fluorescence microscope objective Lomo ML-2 Fluoreszenz Mikroskopobjektiv Lomo 30x 0 90 luminescence water immersion microscope objective iris diaphragm Lomo 30x 0 90 Lumineszenz Wasserimmersion Mikroskopobjektiv mit Irisblende Lomo 30x 0 90 fluorescence water immersion microscope objective iris diaphragm Lomo 30x 0 90 Fluoreszenz Wasserimmersion Mikroskopobjektiv mit Irisblende Lomo Biolam microscope Lomo Biolam Mikroskop Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 129 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-2 Biolam Biolam D11 MBI-1 MBR-3 ML-4M Lg Lumipan MBB-1	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need a 30x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives If you don't like oil immersion but want better image quality than standard, dry 30x objectives	2026-01-30 00:00:00
422 - Thumbnail photo showing this microscope part. Lomo Apo-WI 60x 1,0 D=0 L microscope objective (apochromat, fluorescence water immersion, no cover glass RMS 60x / 1975) - thumbnail [ 00868 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00868	Lomo Apo-WI 60x 1,0 D=0 L microscope objective (apochromat, fluorescence water immersion, no cover glass RMS 60x / 1975)	The name of this microscope part. Lomo Apo-WI 60x 1,0 D=0 L microscope objective (apochromat, fluorescence water immersion, no cover glass RMS 60x / 1975)	Description of this part for the microscope. Apochromatic RMS microscope objective with 60x magnification, very high numerical aperture, designed for use without a cover slip, with water immersion and improved ... correction for fluorescence illumination. Manufacturer: Lomo Model: APO-WI 60x1.0 D=0 L Magnification: 60x Numerical aperture: 1.0 Correction: Apochromat + fluorescence Tube length: 160 mm (?) Focal length: 33 mm (?) Immersion: water Cover slip: no (!) Marking: "L" = luminescence Marking: "D=0" = use without cover slip Thread: RMS Year of manufacture: 1975 Apochromatic objectives are known for exceptional color fidelity, significantly better than achromatic objectives. This objective is extremely rare on the secondary market and highly professional. Key features: - Water immersion is preferred by many users over oil immersion - Very high numerical aperture (1.0) provides high-resolution images - Use without cover slip allows, for example, direct placement of the objective inside a droplet with the sample to be observed Despite the "L" marking, the objective can also be used with normal transmitted light illumination. Lomo objectives marked "L" (luminescence) differ from those without this symbol by: - Improved UV and blue light transmission - Lower autofluorescence of the glass - No or reduced use of organic adhesives in the optical assembly Names, descriptions, terms, and search contexts under which this part is searched. Lomo ML-2 microscope repair parts Lomo ML-2 luminescence microscope objective Lomo ML-2 Lumineszenz Mikroskopobjektiv Lomo ML-2 fluorescence microscope objective Lomo ML-2 Fluoreszenz Mikroskopobjektiv Lomo Apo-WI 60x 1 0 luminescence water immersion microscope objective iris diaphragm Lomo Apo-WI 60x 1 0 Lumineszenz Wasserimmersion Mikroskopobjektiv mit Irisblende Lomo Apo-WI 60x 1 0 fluorescence water immersion microscope objective iris diaphragm Lomo Apo-WI 60x 1 0 Fluoreszenz Wasserimmersion Mikroskopobjektiv mit Irisblende Lomo Biolam microscope Lomo Biolam Mikroskop apochromat Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 199 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ML-2 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ML-2 Biolam Biolam D11 MBI-1 MBR-3 ML-4M Lg Lumipan MBB-1	A list of potential uses for this part and when it might be needed. If you need an apochromatic objective to obtain an image with better color If you want to upgrade your Lomo microscope with original parts If you need a 60x water immersion objective for Lomo, Carl Zeiss Jena, PZO, IOR or other microscopes requiring 33 mm and 160 mm objectives If you need an objective to work without a cover slip but with water immersion (e.g. to observe inside a drop of water) If you have a Lomo microscope from 1975 (serial number starts with "75") and want period-correct objectives If you do not like oil immersion but want better image quality than standard 60x dry objectives	2026-01-31 00:00:00
560 - Thumbnail photo showing this microscope part. Lomo APO-WI-F 70x1,23 microscope objective \| Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972 - thumbnail [ 99141 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99141	Lomo APO-WI-F 70x1,23 microscope objective \| Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972	The name of this microscope part. Lomo APO-WI-F 70x1,23 microscope objective \| Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972	Description of this part for the microscope. Microscope objective with RMS thread with 70x magnification, very high numerical aperture, equipped with a correction ring for cover glass thickness, designed for water ... immersion operation and with a phase contrast ring. Manufacturer: Lomo Model: APO-WI-F 70x1,23 Magnification: 70x Numerical aperture: 1,23 Correction: Apochromat Tube length: 160 mm Focal length: 33 mm Immersion: yes - water Cover glass: yes - thickness from 0.10 to 0.20 mm Markings: APO = Apochromat, WI = water immersion, F = phase contrast Thread: RMS Year of production: 1972 Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653). This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional: - water immersion is preferred by many users over oil immersion - very high numerical aperture, allowing the objective to produce a high resolution image - cover glass thickness correction ring Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness. Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye". Although this objective is a so-called "short" objective, meaning with a focal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a focal length of 45 mm. The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes. Names, descriptions, terms, and search contexts under which this part is searched. Lomo MBB-1 microscope repair parts Lomo MBB-1A microscope objective Lomo Apochromat Mikroskopobjektiv water immersion microscope objective Lomo Apochromatisches Mikroskopobjektiv Lomo 70x 1 23 water immersion microscope objective cover glass correction ring Lomo Biolam microscope Lomo Biolam Mikroskop Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 159 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MBB-1 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MBB-1 Biolam Nf Lumipan Ortholux II Orthoplan Diaplan Amplival Ergaval Fluoval BH-2 BHTU Biolar Polam R-113 Polam L-211 Polam L-213 Standard GFL Standard WL Standard 16 Universal Photomicroscope More [...] V300 M72 M70 Patholux Labopan Laborlux S Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you want to upgrade your Lomo microscope with original parts If you need a 70x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses If you have a Lomo microscope from 1972 (the serial number begins with "72") and want original-era objectives If you don't like oil immersion but want better image quality than standard, dry 60x / 63x objectives	2026-03-05 00:00:00
739 - Thumbnail photo showing this microscope part. PZO 20:1 0,40 RMS microscope objective 20x \| Carl Zeiss Jena Lumipan / Lg compatible - thumbnail [ 99297 ]	SERMIK_ID number under which this microscope part is placed in the database. 99297	PZO 20:1 0,40 microscope objective 20x	The name of this microscope part. PZO 20:1 0,40 RMS microscope objective 20x \| Carl Zeiss Jena Lumipan / Lg compatible	Description of this part for the microscope. PZO microscope objective. Manufacturer: PZO Poland Model: 20:1 0,40 Magnification: 20x Correction: Achromat Numerical Aperture: 0,40 Tube Length: 160 ... mm Focal Length: 33 mm Cover Glass: 0.17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-10 microscope repair parts PZO vintage microscope objective obiektyw do starszego mikroskopu PZO Lomo MBB-1 Mikroskopobjektiv Carl Zeiss Jena Lumipan Mikroskop Objektiv Lomo Biolam microscope objective PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-10 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MB-10 ML1 ML2 MinO M-100 M-110 M-200 M-440 Lg Lr Lu Lumipan Nf MBB-1 Biolam M-9 ML-4M Junat-2P-1 UShM-1 Opta UM-301	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-10 22:00:44
762 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lumipan / Lg 20/0,40 160/0,17 microscope objective 20x - thumbnail [ 99312 ]	SERMIK_ID number under which this microscope part is placed in the database. 99312	Carl Zeiss Jena Lumipan / Lg 20/0,40 160/0,17 microscope objective 20x	The name of this microscope part. Carl Zeiss Jena Lumipan / Lg 20/0,40 160/0,17 microscope objective 20x	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: 20/0,40 160/0,17 Magnification: 20x Correction: Achromat Numerical Aperture: 0,40 Tube Length: 160 mm Focal ... Length: 33 mm Cover Glass: 0.17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lumipan microscope repair parts Carl Zeiss Jena Lumipan microscope objective Carl Zeiss Jena Lumipan Mikroskopobjektiv Lomo Biolam 20x Mikroskopobjektiv Carl Zeiss Jena L-Stativ Carl Zeiss Jena Lg Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lumipan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Lg Lr Lu Nf NfPk Ng ML1 ML2 M-110 M-440 MB-10 MPD-1 MIN-8 MBB-1 Biolam MIN-6 MBP-1 Erudit Biolam 70 More [...] MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-13 23:13:45
831 - Thumbnail photo showing this microscope part. Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter - thumbnail [ 99386 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99386	Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter	The name of this microscope part. Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter	Description of this part for the microscope. Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ... Manufacturer: Lomo Magnification: 20x Model: 20 0.40 P Numerical aperture: 0.40 Tube length: 160 mm Focal length: 33 mm Cover glass: yes, 0.17 mm Thread: RMS + Pol adapter Info: P = Polarization This is an objective designed for transmitted light work with a cover glass. The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter. The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer. Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread. The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools). Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this. In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives. Names, descriptions, terms, and search contexts under which this part is searched. Lomo MIN-8 microscope repair parts Lomo Polam Mikroskopobjektiv Lomo Biolam polarization Mikroskop Lomo MIN-8 Pol-Mikroskop Objektiv Lomo petrographic microscope objective Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIN-8 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MIN-8 MIN-6 MIN-1 MIN-5 MIN-4 ML-2 Lumam R1 Polam R-113 Polam L-211 Polam LMPR Polam R-311 Polam L-213 Lg Lr Lu Lumipan Nf NfPk Eduval Eduval-4 More [...] Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 MBB-1 Polmi A Biorom ML-4M M2240 Collegiate 400 M4000-D Amplival MBI-11 Ergaval Docuval Vertival Epival Metaval Fluoval Standard 14 Biolam-M Biolam Biolar FL Junat-2P-1 UShM-1 Opta UM-301 M72 M-9 M-440 MS-16 MS-2 MB 30S Biolam D11 Standard GFL Standard WL Standard 16 Universal Photomicroscope MBI-1 MB-10 MBR-3 Microsystem 70 MBP-1 M15 Erudit Biolam 70 M70 Patholux MB-30 FL BH-2 BHTU Patholette Standard Junior Biopan Neopan KF 2 MIK-4 Neozet Zetopan MPD-1 ML1 ML2 BH-2 BHS Biolam-I MBI-15 Fluoval-2 BHA MICMED-2 Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a polarisation microscope and need an objective lens with this magnification If you only need a slider to use with other objectives	2026-05-01 01:12:25
832 - Thumbnail photo showing this microscope part. Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter \| macro photography - thumbnail [ 99387 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99387	Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter \| macro photography	The name of this microscope part. Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter \| macro photography	Description of this part for the microscope. Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ... Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description. Manufacturer: Lomo Magnification: 9x Model: PLANACHR 9x0.20 P Numerical aperture: 0.20 Optical correction: planachromatic (flat field) Tube length: 160 mm Focal length: 33 mm Cover glass: optional, can be used but is not required Thread: RMS + Pol adapter Info: P = Polarization The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter. The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer. Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread. The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools). Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this. In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives. Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Names, descriptions, terms, and search contexts under which this part is searched. Lomo MIN-8 microscope repair parts Lomo Polam Mikroskopobjektiv Lomo Biolam polarization Mikroskop Lomo MIN-8 Pol-Mikroskop Objektiv Lomo petrographic microscope objective Mikroskopobjektiv für Makrofotografie Makroobjektiv Super-Macro-Photo objective 9:1 Makroobjektiv Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIN-8 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MIN-8 MIN-6 MIN-1 MIN-5 MIN-4 ML-2 Lumam R1 Polam R-113 Polam L-211 Polam LMPR Polam R-311 Polam L-213 Lg Lr Lu Lumipan Nf NfPk Eduval Eduval-4 More [...] Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 MBB-1 Polmi A Biorom ML-4M M2240 Collegiate 400 M4000-D Amplival MBI-11 Ergaval Docuval Vertival Epival Metaval Fluoval Standard 14 Biolam-M Biolam Biolar FL Junat-2P-1 UShM-1 Opta UM-301 M72 M-9 M-440 MS-16 MS-2 MB 30S Biolam D11 Standard GFL Standard WL Standard 16 Universal Photomicroscope MBI-1 MB-10 MBR-3 Microsystem 70 MBP-1 M15 Erudit Biolam 70 M70 Patholux MB-30 FL BH-2 BHTU Patholette Standard Junior Biopan Neopan KF 2 MIK-4 Neozet Zetopan MPD-1 ML1 ML2 BH-2 BHS Biolam-I MBI-15 Fluoval-2 BHA MICMED-2 Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you have a polarization microscope and are missing an objective with this magnification if you only need the slide adapter to use with other objectives if you are looking for an objective for macro photography and focus stacking	2026-05-01 01:52:35
833 - Thumbnail photo showing this microscope part. Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter \| macro photography 3,7x - thumbnail [ 99385 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99385	Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter \| macro photography 3,7x	The name of this microscope part. Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter \| macro photography 3,7x	Description of this part for the microscope. Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ... Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description. Manufacturer: Lomo Magnification: 3,7x Model: 3,7 0,11 Numerical aperture: 0.11 Tube length: 160 mm Focal length: 33 mm Cover glass: optional, can be used but is not required Thread: RMS + Pol adapter Info: P = Polarization The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter. The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer. Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread. The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools). Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this. In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives. Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective Names, descriptions, terms, and search contexts under which this part is searched. Lomo MIN-8 microscope repair parts Lomo Polam Mikroskopobjektiv Lomo Biolam polarization Mikroskop Lomo MIN-8 Pol-Mikroskop Objektiv Lomo petrographic microscope objective Mikroskopobjektiv für Makrofotografie Makroobjektiv Super-Macro-Photo objective 3 7:1 Makroobjektiv Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 119 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIN-8 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MIN-8 MIN-6 MIN-1 MIN-5 MIN-4 ML-2 Lumam R1 Polam R-113 Polam L-211 Polam LMPR Polam R-311 Polam L-213 Lg Lr Lu Lumipan Nf NfPk Eduval Eduval-4 More [...] Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 MBB-1 Polmi A Biorom ML-4M M2240 Collegiate 400 M4000-D Amplival MBI-11 Ergaval Docuval Vertival Epival Metaval Fluoval Standard 14 Biolam-M Biolam Biolar FL Junat-2P-1 UShM-1 Opta UM-301 M72 M-9 M-440 MS-16 MS-2 MB 30S Biolam D11 Standard GFL Standard WL Standard 16 Universal Photomicroscope MBI-1 MB-10 MBR-3 Microsystem 70 MBP-1 M15 Erudit Biolam 70 M70 Patholux MB-30 FL BH-2 BHTU Patholette Standard Junior Biopan Neopan KF 2 MIK-4 Neozet Zetopan MPD-1 ML1 ML2 BH-2 BHS Biolam-I MBI-15 Fluoval-2 BHA MICMED-2 Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you have a polarization microscope and are missing an objective with this magnification if you only need the slide adapter to use with other objectives if you are looking for an objective for macro photography and focus stacking	2026-05-01 01:57:27
883 - Thumbnail photo showing this microscope part. PZO 5/0.15 microscope objective 5x for macro photography \| for Carl Zeiss Jena and Lomo Biolam - thumbnail [ 99438 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99438	PZO 5/0.15 microscope objective 5x for macro photography \| for Carl Zeiss Jena and Lomo Biolam	The name of this microscope part. PZO 5/0.15 microscope objective 5x for macro photography \| for Carl Zeiss Jena and Lomo Biolam	Description of this part for the microscope. PZO microscope objective 5/0.15 - a model used in microscopes, but also very often used for macro photography. Basic technical parameters: - Manufacturer: PZO ... Poland - Model: 5/0.15 160/- - Alternative model marking: 5/0.15 160/0 - Magnification: 5x - Numerical aperture N.A.: 0.15 - Correction: achromatic - Focal length FL: 33 mm - Tube length: 160 mm - Cover glass: not required, but may be used - Immersion: no (dry objective) - Thread: RMS This model has a metal housing with no lens at its end. Additionally, this housing can be unscrewed without affecting the operation of the objective - resulting in a relatively large working distance of more than 20 mm. Three features: - large working distance exceeding 20 mm - exceptionally high numerical aperture N.A. of 0.15 - achromatic correction allowing direct projection use make this relatively uncommon model very frequently chosen for macro photography using a microscope objective connected to a camera (focus stacking). The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including: - Lomo Biolam - Lomo MBB-1A - Carl Zeiss Jena LG / Lu / Lumipan - Carl Zeiss Jena Nf - Olympus CH Note! Please note that the FL = 33 mm focal length means that this objective DOES NOT FIT the following microscopes: - PZO Biolar - PZO Studar Early versions of this objective (with low serial numbers) have the engraved marking 5/0.15 160/0 suggesting that the objective is intended for use without a cover glass. This is true, but more precisely this objective can work both without a cover glass and with one. In newer versions the engraving already reads 5/0.15 160/- where this "minus" already means "indifferent". Names, descriptions, terms, and search contexts under which this part is searched. PZO MS-16 microscope repair parts 5x macrophoto microscope objective Makrofoto Mikroskopobjektiv PZO 5x microscope objective PZO Poland 5x Mikroskopobjektiv super macro photo stacking PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 5	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MS-16 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MS-16 Lumipan Lg Lr Lu Nf NfPk Ng ML1 ML2 M-110 M-440 MB-10 MPD-1 MIN-8 MBB-1 Biolam MIN-6 MBP-1 Erudit More [...] Biolam 70 MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. if you need a high resolution objective for macro photography if you need a 5x microscope objective with high numerical aperture when you need a good quality 5x objective for an inverted microscope	2026-05-24 00:57:51
887 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lumipan / Lg 40 0,65 0,17 microscope objective 40x - thumbnail [ 99442 ]	SERMIK_ID number under which this microscope part is placed in the database. 99442	Carl Zeiss Jena Lumipan / Lg 40 0,65 0,17 microscope objective 40x	The name of this microscope part. Carl Zeiss Jena Lumipan / Lg 40 0,65 0,17 microscope objective 40x	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Model: 40 0,65 0,17 Magnification: 40x Correction: Achromat Numerical Aperture: 0,65 Tube Length: 160 mm Focal Length: 33 ... mm Cover Glass: 0.17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including: - Lomo Biolam - Lomo MBB-1A - PZO MB-10 - Olympus CH Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lumipan microscope repair parts Carl Zeiss Jena Lumipan microscope objective Carl Zeiss Jena Lumipan Mikroskopobjektiv Lomo Biolam 40x Mikroskopobjektiv Carl Zeiss Jena L-Stativ Carl Zeiss Jena Lg Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 20 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lumipan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Lg Lr Lu Nf NfPk Ng ML1 ML2 M-110 M-440 MB-10 MPD-1 MIN-8 MBB-1 Biolam MIN-6 MBP-1 Erudit Biolam 70 More [...] MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-05-24 20:21:43
890 - Thumbnail photo showing this microscope part. Olympus CH 40 0,65 0,17 microscope objective 40x, also for Carl Zeiss Jena - thumbnail [ 99354 ]	SERMIK_ID number under which this microscope part is placed in the database. 99354	Olympus CH 40 0,65 0,17 microscope objective 40x, also for Carl Zeiss Jena	The name of this microscope part. Olympus CH 40 0,65 0,17 microscope objective 40x, also for Carl Zeiss Jena	Description of this part for the microscope. Manufacturer: Olympus Tokyo Model: 40 0,65 0,17 Japan Magnification: 40x Correction: Achromat Numerical Aperture: 0,65 Tube Length: 160 mm Focal ... Length: 33 mm Cover Glass: 0.17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm. After installing the 12 mm adapter, this objective lens will have FL = 45 mm. The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Lomo Biolam - Lomo MBB-1A - PZO MB-10 - Nikon S - Olympus KHC Names, descriptions, terms, and search contexts under which this part is searched. Olympus CH microscope repair parts Olympus CH Mikroskopobjektiv Nikon S microscope objective Carl Zeiss Jena Lumipan microscope objective Carl Zeiss Jena Lumipan Mikroskopobjektiv Lomo Biolam 40x Mikroskopobjektiv Carl Zeiss Jena L-Stativ Carl Zeiss Jena Lg Mikroskopobjektiv Olympus KHC Mikroskop Objektiv Olympus buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Olympus Olympus Corporation Tokyo Japan	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. CH Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Olympus) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. CH S KHC Lumipan Lg Lr Lu Nf NfPk Ng ML1 ML2 M-110 M-440 MB-10 MPD-1 MIN-8 MBB-1 Biolam MIN-6 More [...] MBP-1 Erudit Biolam 70 MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-05-25 00:24:03
929 - Thumbnail photo showing this microscope part. Carl Zeiss Jena NU / Amplival M19 Planachromat 25x/0,50 oo/0,17 microscope objective - thumbnail [ 99047 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99047	Carl Zeiss Jena NU / Amplival M19 Planachromat 25x/0,50 oo/0,17 microscope objective	The name of this microscope part. Carl Zeiss Jena NU / Amplival M19 Planachromat 25x/0,50 oo/0,17 microscope objective	Description of this part for the microscope. Biological microscope objective Carl Zeiss Jena Planachromat 25x with M19 thread for infinity-corrected systems. Basic parameters: - Element: biological ... microscope objective - Manufacturer: Carl Zeiss Jena - Designation: Planachromat 25x/0,50 oo/0,17 - Magnification: 25x - Numerical aperture N.A.: 0,50 - Optical correction: infinity-corrected tube length - Optical correction class: planachromat - Cover glass: yes, 0.17 mm - Thread: M19 Some facts about Carl Zeiss Jena objectives with M19 thread (CZJ M19) and their compatibility with various microscopes from this manufacturer: - these objectives are most commonly used for technical applications rather than biological applications, therefore most objectives available on the secondary market are intended for use without a cover glass (designation oo/0) - CZJ M19 objectives intended for biological applications (designation oo/0,17) are most commonly used on Carl Zeiss Jena NU / NU2 microscopes - in Carl Zeiss Jena Nf and Lumipan microscopes, CZJ M19 objectives are used together with an EPI illuminator - CZJ M19 objectives can be used in Carl Zeiss Jena Polmi-A microscopes, but they provide a different magnification than the nominal value - Carl Zeiss Jena Amplival / Amplival Pol / Amplival Interphako / Peraval microscopes feature interchangeable nosepieces, and a dedicated nosepiece for M19-thread objectives was also produced for these microscopes - Carl Zeiss Jena Metaval and Neophot microscopes use newer versions of CZJ M19 objectives (with a coarse-knurled edge and shiny housing), although many users still experiment with older M19 objectives on these microscopes - Carl Zeiss Jena Epignost and BK 70x50 microscopes were produced in various versions with completely different configurations - and some of them operate with CZJ M19 objectives - Carl Zeiss Jena Vertival / Epival / Nf / BK 70x50 microscopes often allow the use of CZJ M19 objectives in EPI dark-field mode - on the Carl Zeiss Jena Epityp-2 inverted metallurgical microscope, many users employ biological objectives designed for use with a cover glass, placing the microscope slide "upside down", with the cover glass facing downward toward the objective. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena NU microscope repair parts Carl Zeiss Jena infinity microscope objective Carl Zeiss Jena M19 thread microscope objective Carl Zeiss Jena M19 Gewinde Mikroskopobjektiv Zeiss Jena Mikroskopobjektiv für unendlich korrigierte biologische Systeme Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. NU Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. NU NU-2 Amplival Vertival Lumipan Nf Epival Polmi A BK 70x50 Epignost Epityp-2 Metaval Neophot 21 Carl Zeiss Jena Amplival Pol Carl Zeiss Jena Amplival Interphako Carl Zeiss Jena Peraval	A list of potential uses for this part and when it might be needed. if you need an objective with this magnification for one of the microscopes with which it is compatible (additional information can be found in the description)	2026-06-07 17:17:19
955 - Thumbnail photo showing this microscope part. Wild M20 Heerbrugg 40/0,65 d=0,17 RMS microscope objective 40x, Switzerland - thumbnail [ 99499 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99499	Wild M20 Heerbrugg 40/0,65 d=0,17 RMS microscope objective 40x, Switzerland	The name of this microscope part. Wild M20 Heerbrugg 40/0,65 d=0,17 RMS microscope objective 40x, Switzerland	Description of this part for the microscope. 40x microscope objective manufactured by Wild Heerbrugg for the Wild M20 microscope. Manufacturer: Wild Heerbrugg, Switzerland Model: 40/0.65 d=0. ... 17 Magnification: 40x Correction: Achromat Numerical aperture: 0.65 Tube length: 160 mm Focal length: 33 mm Cover glass: yes, 0.17 mm thickness Immersion: no (dry objective) Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it must support RMS objectives with TL=160 mm and FL=33 mm. After installing a 12 mm adapter, this objective can of course also be used in microscopes designed for FL=45 mm. The fact that this objective has FL = 33 mm (meaning it is a so-called short objective) allows it to be used with microscopes from other manufacturers, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Lomo Biolam - Lomo MBB-1A - PZO MB-10 - Nikon S - Olympus KHC Names, descriptions, terms, and search contexts under which this part is searched. Wild M20 microscope repair parts Wild M20 Mikroskopobjektiv Wild M20 microscope objective Wild Heerbrugg Mikroskop Objektiv Lomo Biolam 40x Mikroskopobjektiv Carl Zeiss Jena Lumipan Mikroskopobjektiv Olympus CH Mikroskop Objektiv Wild buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Wild Wild Heerbrugg Switzerland	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. M20 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Wild) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. M20 CH S KHC Lumipan Lg Lr Lu Nf NfPk Ng MB-10 MPD-1 MIN-8 MBB-1 Biolam MIN-6 MBP-1 Erudit Biolam 70 More [...] MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-06-17 12:47:42
964 - Thumbnail photo showing this microscope part. Lomo 20 0,40 RMS microscope objective 20x LZOS Lytkarino S/N 01234 - thumbnail [ 99512 ]	SERMIK_ID number under which this microscope part is placed in the database. 99512	Lomo 20 0,40 RMS microscope objective 20x LZOS Lytkarino S/N 01234	The name of this microscope part. Lomo 20 0,40 RMS microscope objective 20x LZOS Lytkarino S/N 01234	Description of this part for the microscope. 20x microscope objective made by Lomo with the LZOS Lytkarino factory logo and a unique "golden" serial number. Manufacturer: LZOS Lytkarino (commonly, ... although incorrectly, referred to as "Lomo") Model: 20 0,40 Magnification: 20x Correction: Achromat Numerical aperture: 0.40 Tube length: 160 mm Focal length: 33 mm Cover glass: 0.17 mm Immersion: no Thread: RMS Serial number: 01234 It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=33 mm. After installing a 12 mm adapter, this combination of adapter and objective will function as an objective with FL=45 mm. This objective is attractive mainly to collectors because: - there are very few microscope objectives with the LZOS logo on the secondary market - the objective has a so-called "golden serial number": 01234 Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts Lomo LZOS Lytkrino microscope objective LZOS Mikroskopobjektiv Lomo Biolam 20x Mikroskopobjektiv Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 100 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolam Lumipan Lg Lr Lu Nf NfPk Ng ML1 ML2 M-110 M-440 MB-10 MPD-1 MIN-8 MBB-1 MIN-6 MBP-1 Erudit Biolam 70 More [...] MBR-3 MBI-1 Biorom MC-7 MC-6	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-06-19 22:48:29

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.