Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

based on the N-117M / DN-117M models.

The N-117M / DN-117M is a reasonably good laboratory microscope manufactured in a Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the United Kingdom)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the United Kingdom)
- Apex N-117M (mainly in the United Kingdom)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give their microscopes their own names, just as Delta Optical does in Poland. The best way to check whether this screw fits your microscope is to compare the appearance of your microscope with the microscope from which this screw was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M version has a binocular or trinocular microscope head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, standing for "Digital") - however, the head mounting screw is the same in both cases.

Replacing the head mounting screw may be necessary, for example, when:
- the screw is missing from the microscope, which is common with used microscopes
- the screw in the microscope is bent or broken, which often happens when the microscope is not properly secured for transport
- the screw in the microscope is in poor condition, e.g. damaged because someone tried to force it out with pliers

Description of this part for the microscope.

117M models.

The N-117M / DN-117M is a reasonably good laboratory microscope manufactured in a Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the United Kingdom)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the United Kingdom)
- Apex N-117M (mainly in the United Kingdom)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give their microscopes their own names, just as Delta Optical does in Poland. The best way to check whether this rack fits your microscope is to compare the appearance of your microscope with the microscope from which this rack was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular microscope head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, standing for "Digital") - however, the entire body, and therefore also the condenser height adjustment rack, is the same in both models.

Since the rack of the condenser height adjustment mechanism in this microscope model is made of plastic, it is a component that is very frequently damaged.

Description of this part for the microscope.

117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this nosepiece fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the entire microscope body, and therefore the nosepiece as well, is identical in both models.

Description of this part for the microscope.

mechanical microscope stage, allowing precise movement of the specimen in both the X and Y axes of the stage plane. The manipulator consists of two coaxial knobs, two independent drive shafts and the fixing elements that attach it to the stage mechanism.

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the microscope body is identical, so the stage control handle is also the same in both models.

On the second-hand market and in service documentation one encounters many names referring to this assembly. The most commonly used terms include, among others:
- stage manipulator
- XY stage manipulator
- mechanical stage drive
- stage control knobs
- specimen mover
- coaxial stage drive
- stage drive assembly
- mechanical stage control
- manual XY stage drive
- stage actuator mechanism

Such manipulators very often suffer mechanical damage during transport of the microscope. Because they protrude beyond the outline of the stand, it is precisely they that absorb the impact energy first - in the event of a fall or improper packaging of the instrument.

Damage to the manipulator does not make further work with the microscope impossible. The specimen can be moved by hand, or a simple specimen holder without an XY movement mechanism can be fitted. Such a solution works well at low magnifications; however, when working with objectives of magnifications greater than 40x (e.g. 60x, 63x, 80x or 100x), precise manual movement of the specimen becomes very difficult. At total magnifications exceeding about 400x, even a slight movement of the hand shifts the image by a considerable distance within the field of view. The mechanical manipulator enables very smooth, controlled and repeatable movement of the specimen in both axes, which is particularly important during observation with oil immersion and when producing photographic documentation.

The photographs in the gallery show the exact dimensions of the complete manipulator. The last photograph presents the entire microscope stage together with an arrow indicating the mounting location of this element, which makes it possible to identify the offered part unambiguously.

Description of this part for the microscope.

as a filter holder.

Mechanically, this lens in its housing is located in the microscope base, underneath the condenser. It is screwed into the base (the housing is threaded), while the light source (halogen or LED) is located directly below this collector.

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital"). However, the microscope body is identical - regardless of whether a halogen bulb or LED is used for illumination. Therefore, this collector lens is also the same in all these models.

This microscope part performs several functions:
- it collimates the light beam
- the built-in frosted glass diffuser provides uniform illumination, preventing discoloration in the area of the filament
- it also serves as the holder for round filters

The last photos in the gallery show the entire N-117M type microscope, with an arrow indicating which microscope part is being described and where it is located. This helps prevent any confusion when identifying the microscope part.

Description of this part for the microscope.

as a toothed rack) is located on the underside of the microscope stage and engages with the control handle with coaxial adjustment knobs.

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the microscope body and stage are identical, so this rack is also the same in both models.

The last photo in the gallery shows the entire microscope stage from an N-117M type microscope, with an arrow indicating which microscope part is being described and where it is located. This helps prevent any confusion when identifying the microscope part.

Description of this part for the microscope.

this mounting bracket is located at the end of the microscope stand arm. The microscope head is mounted to this bracket from above, while the objective nosepiece is located below it.

The entire mounting module for both the microscope head and the objective nosepiece consists of the following elements:
- the mounting socket into which the microscope head dovetail is inserted
- the clamping screw that secures the microscope head in this connection
- the Telan lens screwed into this mounting socket, which also holds the objective nosepiece

Here I am presenting the first of these elements - the microscope head connection (mounting socket / bracket).

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the microscope head mounting bracket is the same in all versions of this model.

The last photo in the gallery shows the stand of an N-117M type microscope, with an arrow indicating which microscope part is being described and where it is located. This helps prevent any confusion when identifying the microscope part.

Description of this part for the microscope.

Mechanically, it is located inside the microscope head mounting bracket and is screwed into the objective nosepiece from above, so it also serves as the mounting for the objective nosepiece.

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list - many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the stand is shared by both models, so this Telan lens fits both models.

Microscopes based on the N-117M model have an objective nosepiece tilted inward, and in my opinion this is why a Telan lens is required even though this is a microscope using optics corrected for a 160 mm tube length.

Other names are sometimes used for the Telan lens installed in the microscope, for example:
- nosepiece lens
- intermediate lens
- tube lens (although this is an incorrect term, because a really "Tube lens" has a different function)

The last photo in the gallery shows the stand of an N-117M type microscope, with an arrow indicating which microscope part is being described and where it is located. This helps prevent any confusion when identifying the microscope part.

Description of this part for the microscope.

microscope consists of the following elements:
- the holder into which the condenser is inserted (the so-called condenser basket)
- the clamp located inside this holder, with an internal diameter of 37 mm
- the condenser mounting / clamping screw
- and the mechanism that moves the condenser, consisting of a control knob, a shaft with a pinion, and a rack

Here I am presenting the first three elements, i.e. without the control knob, without the shaft with pinion, and without the rack.

The N-117M / DN-117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list of names - many sellers give the microscopes they sell their own names without a model number (just like Delta Optical in Poland). The best way to check whether this microscope part fits your microscope is to compare the appearance of your microscope with the microscope from which this condenser holder was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the stand is shared by both models, so this condenser holder fits both models.

When might this microscope part need to be replaced?
- if the microscope has a condenser holder in which the clamping screw is missing, bent, or broken off with a fragment remaining in the thread. This is a common fault
- if the clamp is missing from the inside of the condenser holder - this is a common problem because the clamp can be pulled out
- if the metal ring of the condenser holder has been bent as a result of an impact; in this case, the condenser simply cannot be inserted into the holder

The last photo in the gallery shows the stand of an N-117M type microscope, with an arrow indicating which microscope part is being described and where it is located. This helps prevent any confusion when identifying the microscope part.

Description of this part for the microscope.

good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list of names - many sellers give the microscopes they sell their own names without a model number (just like Delta Optical in Poland).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, for "Digital") - but the stand is shared by both models, so fits both models.

Description of this part for the microscope.

manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the United Kingdom)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the United Kingdom)
- Apex N-117M (mainly in the United Kingdom)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list of names - many sellers give the microscopes they sell their own names without a model number, as is the case with Delta Optical in Poland.

This microscope base contains:
- a socket for connecting the power cord
- an ON / OFF switch
- a knob for adjusting the light intensity (brighter-darker)
- the necessary internal electronics
- an LED light source
- IMPORTANT - as can be seen in the photos, there is no light collector in the base

The N-117M model has a binocular or trinocular microscope head, while the DN-117M model has a built-in digital USB camera (hence the "D" at the beginning of the name, from "Digital") - however, the base is shared and fits both of these models.

Some older versions of microscopes based on the N-117M design have halogen illumination (rather than LED, as in the base presented here) - but the shape and the way the base is attached to the microscope arm are the same. A base with halogen illumination and a base with LED illumination can therefore be used interchangeably as a way of upgrading the microscope.

When might it be necessary to replace the microscope base?
- if the microscope base is of very poor quality (it may sometimes have been broken during transport)
- if you want to replace a base with halogen illumination with one with LED illumination
- if something inside the existing base has been damaged: the electronics, switch, or brightness adjustment knob

Description of this part for the microscope.

of view number: 12
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

A note - eyepieces with such a strong magnification are in my opinion better suited to a quick look than to permanent work. I write "in my opinion" on purpose, because this comes from using them and not from the manufacturer's description.
A 16x eyepiece magnification should be treated as a zoom that brings out no additional detail (the resolution is not increased). This matters for example with heads that have their own extra magnification (such as Carl Zeiss Jena heads with a built-in 1.5x or 1.6x factor) - working with a 100x oil immersion objective you then theoretically get 100*1.5*16 = 2400x, while physics does not allow light from the visible range to be usefully magnified for the human eye beyond roughly 1250x - so this is what is called empty magnification.

Description of this part for the microscope.

5x
Field of view number: 16
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

Description of this part for the microscope.

100x
Colour correction: achromatic
Model: E. 100 1.25 oil 160/0.17
Numerical aperture N.A.: 1.25
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: yes, oil
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.

Description of this part for the microscope.

correction: achromatic
Model: E 40 0.65 160/0.17
Numerical aperture N.A.: 0.65
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: no
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.