Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Advanced search






The table below is the search result: "Vickers M72"

of 37 [Newest first]

Main table with a list of microscope parts

Photos PartIndex Short name Part name Description Number of pieces Price Category Manufacturer It comes from Compatible with Why do you need this? Added ↑

202 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00671
Carl Zeiss Jena Gleitfett I E10 microscope grease

The name of this microscope part.

Carl Zeiss Jena Gleitfett I E10 microscope grease

Description of this part for the microscope.

Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett I E10.

I have not managed to find any documentation describing how the individual ...

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts
  • Carl Zeiss Jena micromanipulator
  • wymiana smaru Carl Zeiss Jena
  • Carl Zeiss Jena Gleitfett I E10
  • Carl Zeiss Jena microscope grease Gleitfett I E10 original
  • Carl Zeiss Jena Mikroskop neufetten Originalfett
  • Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
  • Carl Zeiss Jena Lumipan / Nf Trieb neufetten
  • Grobtrieb schwergängig - Carl Zeiss Jena Fett
  • stiff focus - Carl Zeiss Jena grease
  • mazivo Carl Zeiss Jena Gleitfett I E10
  • grasa Carl Zeiss Jena Gleitfett I E10
  • grasa para microscopio Carl Zeiss Jena Amplival
  • grasso Carl Zeiss Jena Gleitfett I E10
  • grasso per microscopio Carl Zeiss Jena Lumipan
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

35 €

Name of the category to which this microscope part is classified.

Extras

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MIPU micrurgy equipments

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

part

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • When you need to service your microscope or microscope component and need to replace the lubricants (grease).
0000-00-00 00:00:00

203 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00672
Carl Zeiss Jena Gleitfett II E75 microscope grease

The name of this microscope part.

Carl Zeiss Jena Gleitfett II E75 microscope grease

Description of this part for the microscope.

Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett II E75.

I have not managed to find any documentation describing how the individual ...

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts
  • Carl Zeiss Jena micromanipulator
  • wymiana smaru Carl Zeiss Jena
  • Carl Zeiss Jena Gleitfett II E75
  • Carl Zeiss Jena microscope grease Gleitfett II E75 original
  • Carl Zeiss Jena Mikroskop neufetten Originalfett
  • Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
  • Carl Zeiss Jena Lumipan / Nf Trieb neufetten
  • Grobtrieb schwergängig - Carl Zeiss Jena Fett
  • stiff focus - Carl Zeiss Jena grease
  • mazivo Carl Zeiss Jena Gleitfett II E75
  • grasa Carl Zeiss Jena Gleitfett II E75
  • grasa para microscopio Carl Zeiss Jena Amplival
  • grasso Carl Zeiss Jena Gleitfett II E75
  • grasso per microscopio Carl Zeiss Jena Lumipan
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

35 €

Name of the category to which this microscope part is classified.

Extras

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MIPU micrurgy equipments

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

part

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • When you need to service your microscope or microscope component and need to replace the lubricants (grease).
0000-00-00 00:00:00

331 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00757
PZO K15x microscope measuring eyepiece

The name of this microscope part.

PZO K15x microscope measuring eyepiece

Description of this part for the microscope.

Precision measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either ...

transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: PZO
Model: K15x
Magnification: 15x
Image: micrometer and X-crosshair
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide. The entire unit is housed in an original wooden box.

The kit includes a slide with a standard micrometer scale to calibrate this eyepiece at any magnification.

Identical K15x eyepieces were also made by other manufacturers, such as Lomo and Carl Zeiss Jena.

Names, descriptions, terms, and search contexts under which this part is searched.

  • PZO Biolar microscope repair parts
  • PZO K15x Messokular mit Skala
  • PZO K15x measuring eyepiece micrometer 23.2 mm
  • PZO Biolar Messokular 15x
  • Carl Zeiss Jena Amplival / Vertival measuring eyepiece 15x
  • Lomo Biolam Messokular 15x
  • Carl Zeiss Jena Epignost / Metaval micrometer eyepiece
  • PZO K15x Okular Strichplatte fokussierbar
  • okulár s měřítkem PZO K15x
  • ocular micrométrico PZO K15x
  • ocular de medición para microscopio PZO Biolar
  • oculare micrometrico PZO K15x
  • oculare di misura per microscopio PZO Biolar
  • PZO buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

79 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

PZO

Polskie Zaklady Optyczne

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Biolar

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(PZO)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need to make precise measurements on your microscope, surface defects, spores, crystals and everything else
2026-01-18 19:40:26

336 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00762
GS Flat 10/0.25 160/- microscope objective 10x

The name of this microscope part.

GS Flat 10/0.25 160/- microscope objective 10x

Description of this part for the microscope.

Manufacturer: GS (Gillett & Sibert)
Model: FLAT 10/0.25 160/-
Magnification: 10x
Correction: Plan-Achromat
Numerical Aperture: 0.25
Tube Length: 160 ...

mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • GS Lablynx microscope repair parts
  • GS 10x Mikroskop Objektiv
  • GS FLAT 10/0.25 160/- Objektiv
  • Gillett & Sibert FLAT 10/0.25 160/- microscope objective
  • GS Lablynx Planachromat Objektiv 10x
  • Gillett Sibert plan achromat flat objective 10x 160 mm
  • Carl Zeiss Jena Amplival / Ergaval 10x Objektiv Ersatz
  • Olympus CH-2 10x objective replacement
  • Zeiss Standard 14 10x RMS Objektiv
  • GS 10x Objektiv Pilz - Ersatz
  • objektiv GS Gillett & Sibert 10x
  • objetivo GS Gillett & Sibert 10x
  • objetivo 10x para microscopio PZO Biolar
  • obiettivo GS Gillett & Sibert 10x
  • obiettivo 10x per microscopio PZO Biolar
  • GS buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

34 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

GS

Gillett & Sibert London, England

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Lablynx

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(GS)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-01-19 00:00:00

337 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00764
GS 100/1.30 160/Oil microscope objective 100x

The name of this microscope part.

GS 100/1.30 160/Oil microscope objective 100x

Description of this part for the microscope.

Manufacturer: GS (Gillett & Sibert)
Model: 100/1.30 160/OIL
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,30
Tube Length: 160 mm
Focal ...

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • GS Lablynx microscope repair parts
  • GS 100x Mikroskop Objektiv
  • GS 100/1.30 160/Oil Objektiv
  • Gillett & Sibert 100/1.30 160/Oil microscope objective
  • GS Lablynx Ölimmersion Objektiv 100x
  • Gillett Sibert oil immersion objective 100x 160 mm
  • Carl Zeiss Jena Amplival / Ergaval 100x Objektiv Ersatz
  • Olympus CH-2 100x objective replacement
  • Zeiss Standard 14 100x RMS Objektiv
  • GS 100x Objektiv Pilz - Ersatz
  • objektiv GS Gillett & Sibert 100x
  • objetivo GS Gillett & Sibert 100x
  • objetivo 100x para microscopio PZO Biolar
  • obiettivo GS Gillett & Sibert 100x
  • obiettivo 100x per microscopio PZO Biolar
  • GS buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

49 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

GS

Gillett & Sibert London, England

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Lablynx

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(GS)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-01-19 00:00:00

338 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00763
GS FL 55/0.95 160/Oil microscope objective 55x

The name of this microscope part.

GS FL 55/0.95 160/Oil microscope objective 50x 55x

Description of this part for the microscope.

Manufacturer: GS (Gillett & Sibert)
Model: FL 55/0.95 160/OIL
Magnification: 55x
Correction: Fluor
Numerical Aperture: 0,95
Tube Length: 160 mm
Focal ...

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

This is an oil-immersion objective with a high numerical aperture. It is recommended for working with fluorescent light or for those whose primary magnification is around 40x, 45x, 50x, 55x, 60x, or 63x and who want to achieve the highest possible quality and detail visibility.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • GS Lablynx microscope repair parts
  • GS 55x Mikroskop Objektiv
  • GS FL 55/0.95 160/Oil Objektiv
  • Gillett & Sibert FL 55/0.95 160/Oil microscope objective
  • GS Lablynx Fluorit Öl Objektiv 55x
  • Gillett Sibert fluorite oil objective 55x 160 mm
  • Carl Zeiss Jena Amplival / Ergaval 55x Objektiv Ersatz
  • Olympus CH-2 55x objective replacement
  • Zeiss Standard 14 55x RMS Objektiv
  • GS 55x Objektiv Pilz - Ersatz
  • objektiv GS Gillett & Sibert 55x
  • objetivo GS Gillett & Sibert 55x
  • objetivo 55x para microscopio PZO Biolar
  • obiettivo GS Gillett & Sibert 55x
  • obiettivo 55x per microscopio PZO Biolar
  • GS buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

44 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

GS

Gillett & Sibert London, England

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Lablynx

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(GS)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-01-19 00:00:00

416 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00807
Meopta H8x M10 microscope measuring eyepiece

The name of this microscope part.

Meopta H8x M10 microscope measuring eyepiece

Description of this part for the microscope.

Measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or ...

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Meopta
Model: H8x M10
Magnification: 8x
Image: micrometer
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Meopta RU2 microscope repair parts
  • Meopta H8x M10 measuring microscope eyepiece
  • Meopta H8x M10 Mikroskop Messokular
  • Meopta H8x M10 Okular mit Skala 23.2 mm
  • Carl Zeiss Jena Amplival / Vertival Messokular
  • Lomo Biolam measuring eyepiece 8x
  • Meopta DRU-3 micrometer eyepiece
  • okulár s měřítkem Meopta H8x M10
  • ocular micrométrico Meopta H8x M10
  • ocular de medición para microscopio PZO Biolar
  • oculare micrometrico Meopta H8x M10
  • oculare di misura per microscopio PZO Biolar
  • Meopta buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

Meopta

Meopta s.r.o.

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

RU2

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Meopta)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need to make measurements on your microscope, surface defects, spores, crystals and everything else
2026-01-28 00:00:00

555 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99140
Leitz Orthoplan - PLEZY 8 mm microscope objective Extender Adapter

The name of this microscope part.

Leitz Orthoplan - PLEZY 8 mm microscope objective Extender Adapter | focal length 37-45 mm changer

Description of this part for the microscope.

The Leitz PLEZY is an extension adapter for RMS-thread microscope objectives that increases the parfocal focal length from 37 mm to 45 mm, making older objectives ...

compatible with microscopes designed for a 45 mm parfocal standard It is mounted between the objective and the nosepiece/revolver so that optical focus is maintained despite the additional mechanical extension.

Leitz PLEZY differs from extension adapters available on the market in that it features internal anti-reflective optics, ensuring that despite the mechanical extension of the focal length the image quality is not degraded.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Leitz Orthoplan microscope repair parts
  • Leitz PLEZY RMS objective focal length adapter
  • Leitz PLEZY Mikroskopobjektiv Verlängerungs-Adapter
  • Wie verlängert man ein Mikroskopobjektiv?
  • Can I mount a short Microscope objective to a microscope?
  • Leitz PLEZY 8 mm Objektiv Verlängerung 37 auf 45 mm
  • Leitz Orthoplan / Ortholux II objective extender 37 to 45 mm
  • Carl Zeiss Jena Amplival / Ergaval 37 mm Objektiv auf 45 mm
  • PZO Biolar short objective extension adapter
  • prodlužovací adaptér objektivu Leitz PLEZY 8 mm
  • adaptador extensor de objetivo Leitz PLEZY 37 a 45 mm
  • adaptador para objetivos cortos microscopio PZO Biolar
  • adattatore prolunga obiettivo Leitz PLEZY 37 a 45 mm
  • adattatore per obiettivi corti microscopio PZO Biolar
  • przedłużka obiektywu Leitz PLEZY 37 na 45 mm
  • Leitz buy spare parts

The number of pieces of this microscope part that we have to offer.

2

Price in EURO for 1 piece of this microscope part. Price is negotiable.

59 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Leitz

Leitz Wetzlar

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Orthoplan

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Leitz)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you want to use older microscope objectives (those with a length of 37 mm) on a newer microscope that requires objectives with a length of 45 mm
2026-03-04 22:42:49

560 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99141
Lomo APO-WI-F 70x1,23 microscope objective | Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972

The name of this microscope part.

Lomo APO-WI-F 70x1,23 microscope objective | Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972

Description of this part for the microscope.

Microscope objective with RMS thread with 70x magnification, very high numerical aperture, equipped with a correction ring for cover glass thickness, designed for water ...

immersion operation and with a phase contrast ring.

Manufacturer: Lomo
Model: APO-WI-F 70x1,23
Magnification: 70x
Numerical aperture: 1,23
Correction: Apochromat
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes - water
Cover glass: yes - thickness from 0.10 to 0.20 mm
Markings: APO = Apochromat, WI = water immersion, F = phase contrast
Thread: RMS
Year of production: 1972

Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653).

This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional:
- water immersion is preferred by many users over oil immersion
- very high numerical aperture, allowing the objective to produce a high resolution image
- cover glass thickness correction ring

Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness.
Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye".

Although this objective is a so-called "short" objective, meaning with a parfocal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a parfocal length of 45 mm.

The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Lomo MBB-1 microscope repair parts
  • Lomo MBB-1A microscope objective
  • Lomo Apochromat Mikroskopobjektiv
  • Lomo water immersion microscope objective 70x
  • Lomo Apochromatisches Mikroskopobjektiv
  • Lomo 70x 1.23 water immersion microscope objective cover glass correction ring
  • Lomo APO-WI-F 70x 1.23 Phasenkontrast Wasserimmersion
  • Lomo Biolam 70x Apochromat Objektiv 33 mm
  • Bresser Biolam APO 70x Objektiv
  • Carl Zeiss Jena Lumipan / Nf 70x water immersion objective
  • Leitz Orthoplan RMS apochromat 70x
  • ЛОМО АПО-ВИ-Ф 70х объектив
  • apochromatický objektiv LOMO APO-WI-F 70x a Zeiss Jena
  • objetivo apocromático LOMO 70x inmersión en agua
  • objetivo 70x para microscopio Lomo Biolam
  • obiettivo apocromatico LOMO 70x ad immersione in acqua
  • obiettivo 70x per microscopio Carl Zeiss Jena Lumipan
  • obiektyw immersyjny wodny LOMO APO-WI-F 70x
  • Lomo buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

159 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Lomo

Leningrad Optical Mechanical Association

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MBB-1

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Lomo)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you want to upgrade your Lomo microscope with original parts
  • If you need a 70x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
  • If you have a Lomo microscope from 1972 (the serial number begins with "72") and want original-era objectives
  • If you don't like oil immersion but want better image quality than standard, dry 60x / 63x objectives
2026-03-05 00:00:00

609 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99182
Carl Zeiss Jena D42 15x microscope measuring eyepiece

The name of this microscope part.

Carl Zeiss Jena D42 15x microscope measuring eyepiece

Description of this part for the microscope.

Precision measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either ...

transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Carl Zeiss Jena
Model: D42 15x
Magnification: 15x
Image: micrometer and X-crosshair
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Identical K15x eyepieces were also made by other manufacturers, such as Lomo and PZO.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Technival-2 microscope repair parts
  • Carl Zeiss Jena D42 15x Messokular
  • Carl Zeiss Jena D42 15x measuring eyepiece micrometer
  • Carl Zeiss Jena Technival-2 Messokular 15x
  • Carl Zeiss Jena Amplival / Vertival measuring eyepiece 15x
  • Carl Zeiss Jena Epignost / Metaval Okular Strichplatte
  • Lomo Biolam measuring eyepiece 15x
  • okulár s měřítkem Carl Zeiss Jena D42 15x
  • ocular micrométrico Carl Zeiss Jena D42 15x
  • ocular de medición para microscopio PZO Biolar
  • oculare micrometrico Carl Zeiss Jena D42 15x
  • oculare di misura per microscopio PZO Biolar
  • okular pomiarowy Carl Zeiss Jena D42 15x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

79 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Technival-2

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need to make precise measurements on your microscope, surface defects, spores, crystals and everything else
2026-03-13 00:00:00

750 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99295
Carl Zeiss Jena 7x microscope measuring eyepiece, micrometer

The name of this microscope part.

Carl Zeiss Jena 7x microscope measuring eyepiece, micrometer

Description of this part for the microscope.

Measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or ...

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Carl Zeiss Jena
Magnification: 7x
Image: micrometer
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena measuring microscope eyepiece 7x
  • Carl Zeiss Jena Mikroskop Messokular 7x
  • okular pomiarowy do mikroskopu Carl Zeiss Jena
  • Carl Zeiss Jena 7x Messokular mit Mikrometer
  • Carl Zeiss Jena 7x adjustable measuring eyepiece with micrometer scale
  • Carl Zeiss Jena Amplival / Vertival Messokular 7x
  • Lomo Biolam measuring eyepiece 7x
  • měřicí okulár s mikrometrem Carl Zeiss Jena 7x
  • ocular de medición Carl Zeiss Jena 7x
  • ocular de medición para microscopio PZO Biolar
  • oculare di misura Carl Zeiss Jena 7x
  • oculare di misura per microscopio PZO Biolar
  • okular z mikrometrem Carl Zeiss Jena 7x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need to make measurements on your microscope, surface defects, spores, crystals and everything else
2026-04-12 02:06:04

751 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99294
Carl Zeiss Jena 7x microscope adjustable measuring eyepiece, without micrometer scale inside

The name of this microscope part.

Carl Zeiss Jena 7x microscope adjustable measuring eyepiece, without micrometer scale inside

Description of this part for the microscope.

Measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or ...

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Carl Zeiss Jena
Magnification: 7x
Image: none
Mounting diameter: 23.2 mm

There is no measuring scale glass inside the eyepiece. Any 19mm diameter glass can be inserted inside, for example, with a crosshair, micrometer, or reticle.

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena measuring microscope eyepiece 7x
  • Carl Zeiss Jena Mikroskop Messokular 7x
  • okular pomiarowy do mikroskopu Carl Zeiss Jena
  • Carl Zeiss Jena 7x Messokular ohne Strichplatte
  • Carl Zeiss Jena 7x adjustable measuring eyepiece without micrometer scale
  • Carl Zeiss Jena Amplival / Vertival Messokular 7x
  • Lomo Biolam measuring eyepiece 7x
  • měřicí okulár Carl Zeiss Jena 7x bez stupnice
  • ocular de medición Carl Zeiss Jena 7x
  • ocular de medición para microscopio PZO Biolar
  • oculare di misura Carl Zeiss Jena 7x
  • oculare di misura per microscopio PZO Biolar
  • okular pomiarowy Carl Zeiss Jena 7x bez skali
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

15 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need to make measurements on your microscope, surface defects, spores, crystals and everything else
2026-04-12 03:09:53

752 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

00779
Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x

The name of this microscope part.

Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x

Description of this part for the microscope.

Carl Zeiss (Germany) microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss (Germany)
Magnification: 2,5x
Model: Plan 2,5/0, ...

08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Standard WL microscope repair parts
  • Zeiss Plan 2.5/0.08 160/- Mikroskopobjektiv
  • Carl Zeiss Standard GFL microscope objective 2.5x
  • Carl Zeiss Universal Mikroskop Objektiv mit kleiner Vergrößerung
  • Carl Zeiss Phomi Weitfeld Mikroskopobjektiv 2.5x
  • Zeiss Großfeld Mikroskopobjektiv für Pathologie
  • Zeiss Übersichtsobjektiv 2.5x
  • obiektyw mikroskopowy do obserwacji owadów
  • Zeiss Plan 2.5x Objektiv für Insektenuntersuchung
  • Carl Zeiss Jena Amplival / Ergaval 2.5x objective 45 mm
  • objektiv Zeiss Plan 2.5x
  • objetivo Zeiss Plan 2.5x panorámico
  • objetivo 2.5x para microscopio Carl Zeiss Jena Amplival
  • obiettivo Zeiss Plan 2.5x panoramico
  • obiettivo 2.5x per microscopio Carl Zeiss Jena Ergaval
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

25 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Standard WL

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-12 15:50:57

760 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99318
Vickers 40/0,65 microscope objective 40x, RMS

The name of this microscope part.

Vickers 40/0,65 microscope objective 40x, RMS

Description of this part for the microscope.

Vickers (England) microscope objective.

Technical parameters:
Manufacturer: Vickers (England)
Magnification: 40x
Model: 40/0,65
Color correction: ...

Achromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,18 mm (!)
Immersion: no
Thread: RMS
Vickers P/N: M022511

Names, descriptions, terms, and search contexts under which this part is searched.

  • Vickers Patholux microscope repair parts
  • Vickers M15 Mikroskopobjektiv 40x
  • Vickers Patholux microscope objective 40x
  • Vickers England Patholux Mikroskopobjektiv
  • Vickers 40/0.65 RMS Objektiv 45 mm
  • Vickers Patholette / M72 / M70 40x objective
  • Vickers 40x Frontlinse zerkratzt - Ersatz
  • objektiv Vickers 40x
  • objetivo Vickers 40x RMS
  • objetivo microscopio Vickers Patholux
  • obiettivo Vickers 40x RMS
  • obiettivo microscopio Vickers Patholux
  • obiektyw mikroskopowy Vickers 40x
  • Vickers buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

29 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Vickers

Vickers Instruments Ltd.

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Patholux

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Vickers)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-13 21:15:54

761 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99319
Vickers 100/1,3 Oil microscope objective 100x, RMS

The name of this microscope part.

Vickers 100/1,3 Oil microscope objective 100x, RMS

Description of this part for the microscope.

Vickers (England) microscope objective.

Technical parameters:
Manufacturer: Vickers (England)
Magnification: 100x
Model: 100/1,3 Oil
Color correction: ...

Achromat
Numerical aperture: 1,3
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,18 mm (!)
Immersion: yes, oil
Thread: RMS
Vickers P/N: M022611

Names, descriptions, terms, and search contexts under which this part is searched.

  • Vickers Patholux microscope repair parts
  • Vickers M15 Mikroskopobjektiv 100x
  • Vickers Patholux microscope objective 100x
  • Vickers England Patholux Mikroskopobjektiv Öl
  • Vickers 100/1.3 Oil RMS Objektiv 45 mm
  • Vickers Patholette / M72 / M70 100x objective
  • Vickers 100x Frontlinse zerkratzt - Ersatz
  • objektiv Vickers 100x
  • objetivo Vickers 100x RMS
  • objetivo microscopio Vickers Patholux
  • obiettivo Vickers 100x RMS
  • obiettivo microscopio Vickers Patholux
  • obiektyw mikroskopowy Vickers 100x
  • Vickers buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

29 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Vickers

Vickers Instruments Ltd.

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Patholux

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Vickers)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-13 22:15:55

763 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99323
Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x

The name of this microscope part.

Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x

Description of this part for the microscope.

Manufacturer: Carl Zeiss West Germany
Model: Ph2 40 0,65
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal ...

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Universal microscope repair parts
  • Carl Zeiss Standard GFL Ph2 Phasenkontrast Mikroskopobjektiv 40x
  • Carl Zeiss 40x phase contrast microscope objective Ph2
  • Zeiss Universal / Phomi Ph2 40 0.65 Objektiv
  • Carl Zeiss Photomikroskop Ph2 Phasenkontrast Objektiv
  • Zeiss Standard WL Ph2 40x objective 45 mm
  • Carl Zeiss Jena Nf Ph2 phase objective 40x
  • PZO Biolar Phasenkontrast Objektiv 40x Zeiss
  • objektiv fázový kontrast Zeiss Ph2 40x
  • objetivo contraste de fases Zeiss Ph2 40x
  • objetivo Ph2 40x para microscopio PZO Biolar
  • obiettivo contrasto di fase Zeiss Ph2 40x
  • obiettivo Ph2 40x per microscopio PZO Biolar
  • obiektyw fazowy Zeiss Ph2 40x
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

59 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Universal

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-04-14 00:08:25

764 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99324
Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x

The name of this microscope part.

Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x

Description of this part for the microscope.

Manufacturer: Carl Zeiss West Germany
Model: Ph3 100 1,25 Oel
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,25
Tube Length: 160 ...

mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Universal microscope repair parts
  • Carl Zeiss Standard GFL Ph3 Phasenkontrast Mikroskopobjektiv 100x
  • Carl Zeiss 100x phase contrast microscope objective Ph3
  • Zeiss Universal / Phomi Ph3 100 1.25 Oel Objektiv Öl
  • Carl Zeiss Photomikroskop Ph3 Phasenkontrast Objektiv
  • Zeiss Standard WL Ph3 100x objective 45 mm
  • Carl Zeiss Jena Nf Ph3 phase objective 100x
  • PZO Biolar Phasenkontrast Objektiv 100x Zeiss
  • objektiv fázový kontrast Zeiss Ph3 100x
  • objetivo contraste de fases Zeiss Ph3 100x
  • objetivo Ph3 100x para microscopio PZO Biolar
  • obiettivo contrasto di fase Zeiss Ph3 100x
  • obiettivo Ph3 100x per microscopio PZO Biolar
  • obiektyw fazowy Zeiss Ph3 100x
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

59 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Universal

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-04-14 00:55:15

782 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99335
PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x

The name of this microscope part.

PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x

Description of this part for the microscope.

Polarization-interference microscope objective by PZO

Basic parameters:
Manufacturer: PZO Poland
Model: 10/0,24 PI 160/-
Magnification: ...

10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).

Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).

VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.

Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.

It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • PZO Biolar DIC microscope repair parts
  • PZO Biolar DIC PI Polarisation-Interferenz Mikroskopobjektiv
  • PZO UPI Pluta polarisation interference microscope objective
  • obiektyw PZO polaryzacyjno-interferencyjny
  • PZO Biolar DIC 10/0.24 PI 160/- Objektiv
  • PZO Biolar DIK 10x Objektiv 45 mm
  • Carl Zeiss Jena Nf DIC Pluta 10x objective
  • Olympus CH-2 DIC objective PZO
  • objektiv PZO Biolar PI 10x
  • objetivo de interferencia PZO Biolar PI 10x
  • objetivo DIC Pluta para microscopio PZO Biolar
  • obiettivo a interferenza PZO Biolar PI 10x
  • obiettivo DIC Pluta per microscopio PZO Biolar
  • PZO buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

69 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

PZO

Polskie Zaklady Optyczne

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Biolar DIC

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(PZO)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it
  • if you need a polarization-interference objective for your own purposes
  • if you have such an objective but it is of very poor quality or damaged
  • if you want to keep such an objective as a spare
2026-04-16 23:37:42

800 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99365
Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x

The name of this microscope part.

Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x

Description of this part for the microscope.

Carl Zeiss Jena microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 3,2x
Model: Planachromat 3,2/0, ...

10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Planachromat Mikroskopobjektiv 3.2x
  • Carl Zeiss Jena Amplival microscope objective 3.2x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv 3.2x
  • Carl Zeiss Jena Planachromat 3.2/0.10 160/- Objektiv 45 mm
  • Carl Zeiss Jena Nf / Docuval planachromat 3.2x
  • Carl Zeiss Jena Übersichtsobjektiv für Pathologie
  • Carl Zeiss Jena 3.2x objective for insects
  • Carl Zeiss Jena 3.2x Objektiv Pilz - Ersatz
  • objektiv Carl Zeiss Jena Planachromat 3.2x
  • objetivo Carl Zeiss Jena Planachromat 3.2x
  • objetivo 3.2x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Planachromat 3.2x
  • obiettivo 3.2x per microscopio PZO Biolar
  • obiektyw mikroskopowy do obserwacji owadów Carl Zeiss Jena 3.2x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

35 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 17:22:15

801 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99366
Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x

The name of this microscope part.

Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x

Description of this part for the microscope.

Carl Zeiss Jena microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 10x
Model: Planachromat 10/0,25 160/- ...


Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Planachromat Mikroskopobjektiv 10x
  • Carl Zeiss Jena Amplival microscope objective 10x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv 10x
  • Carl Zeiss Jena Planachromat 10/0.25 160/- Objektiv 45 mm
  • Carl Zeiss Jena Nf / Docuval planachromat 10x
  • Lomo Biolam plan Mikroskopobjektiv 10x
  • Carl Zeiss Jena 10x Objektiv Pilz - Ersatz
  • objektiv Carl Zeiss Jena Planachromat 10x
  • objetivo Carl Zeiss Jena Planachromat 10x
  • objetivo 10x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Planachromat 10x
  • obiettivo 10x per microscopio PZO Biolar
  • obiektyw Planachromat do mikroskopu PZO Biolar 10x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 17:42:26

802 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99367
Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x

The name of this microscope part.

Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x

Description of this part for the microscope.

Carl Zeiss Jena microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 16x
Model: Planachromat 16/0,32 160/0, ...

17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Planachromat Mikroskopobjektiv 16x
  • Carl Zeiss Jena Amplival microscope objective 16x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv 16x
  • Carl Zeiss Jena Planachromat 16/0.32 160/0.17 Objektiv 45 mm
  • Carl Zeiss Jena Nf / Docuval planachromat 16x
  • Lomo Biolam plan Mikroskopobjektiv 16x
  • Carl Zeiss Jena 16x Objektiv Pilz - Ersatz
  • objektiv Carl Zeiss Jena Planachromat 16x
  • objetivo Carl Zeiss Jena Planachromat 16x
  • objetivo 16x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Planachromat 16x
  • obiettivo 16x per microscopio PZO Biolar
  • obiektyw Planachromat do mikroskopu PZO Biolar 16x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 18:01:40

803 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99368
Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x

The name of this microscope part.

Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x

Description of this part for the microscope.

Carl Zeiss Jena microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 40x
Model: Planachromat 40/0,65 160/0, ...

17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Planachromat Mikroskopobjektiv 40x
  • Carl Zeiss Jena Amplival microscope objective 40x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv 40x
  • Carl Zeiss Jena Planachromat 40/0.65 160/0.17 Objektiv 45 mm
  • Carl Zeiss Jena Nf / Docuval planachromat 40x
  • Lomo Biolam plan Mikroskopobjektiv 40x
  • Carl Zeiss Jena 40x Objektiv Pilz - Ersatz
  • objektiv Carl Zeiss Jena Planachromat 40x
  • objetivo Carl Zeiss Jena Planachromat 40x
  • objetivo 40x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Planachromat 40x
  • obiettivo 40x per microscopio PZO Biolar
  • obiektyw Planachromat do mikroskopu PZO Biolar 40x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 18:04:56

804 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99369
Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x

The name of this microscope part.

Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x

Description of this part for the microscope.

Carl Zeiss Jena microscope objective.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 100x
Model: Planachromat HI 100/1,25 160/0, ...

17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Planachromat Mikroskopobjektiv 100x
  • Carl Zeiss Jena Amplival microscope objective 100x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv 100x
  • Carl Zeiss Jena Planachromat HI 100/1.25 160/0.17 Objektiv 45 mm
  • Carl Zeiss Jena Nf / Docuval planachromat 100x
  • Carl Zeiss Jena 100x Ölimmersion Objektiv
  • Carl Zeiss Jena 100x Objektiv Pilz - Ersatz
  • objektiv Carl Zeiss Jena Planachromat 100x
  • objetivo Carl Zeiss Jena Planachromat 100x
  • objetivo 100x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Planachromat 100x
  • obiettivo 100x per microscopio PZO Biolar
  • obiektyw immersyjny Planachromat Carl Zeiss Jena 100x
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

39 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 18:15:29

805 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99371
PZO 5xH microscope eyepieces 23,2 mm (pair)

The name of this microscope part.

PZO 5xH microscope eyepieces with a mounting diameter of 23.2 mm (pair)

Description of this part for the microscope.

Pair (two pieces) of microscope eyepieces.

Manufacturer: PZO
Magnification: 5x
Model: PZO 5xH
Type: Huygens
Mounting Diameter: 23.2 mm

These ...

eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • PZO Studar microscope repair parts
  • PZO Biolar microscope eyepieces 5x
  • PZO Studar Mikroskop Okulare 5x
  • okulary mikroskopowe PZO 5x
  • PZO 5xH Huygens Okulare Paar 23.2 mm
  • PZO MB-30 / ML-5 eyepieces 5x
  • Carl Zeiss Jena Lg Okulare 5x PZO
  • PZO Okular Pilz - Ersatz
  • okuláry PZO 5x 23.2 mm
  • oculares PZO 5x 23.2 mm
  • oculares 5x para microscopio PZO Biolar
  • oculari PZO 5x 23.2 mm
  • oculari 5x per microscopio PZO Biolar
  • PZO buy spare parts

The number of pieces of this microscope part that we have to offer.

10

Price in EURO for 1 piece of this microscope part. Price is negotiable.

19 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

PZO

Polskie Zaklady Optyczne

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Studar

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(PZO)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you don't have these eyepieces in your set
  • if you want to replace your poor-quality eyepieces
2026-04-23 18:53:13

806 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99372
PZO 15x microscope eyepieces 23,2 mm (pair)

The name of this microscope part.

PZO 15x microscope eyepieces with a mounting diameter of 23.2 mm (pair)

Description of this part for the microscope.

Pair (two pieces) of microscope eyepieces.

Manufacturer: PZO
Magnification: 15x
Mounting Diameter: 23.2 mm

These eyepieces can be used with ...

microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • PZO Biolar microscope repair parts
  • PZO Biolar microscope eyepieces 15x
  • PZO Studar Mikroskop Okulare 15x
  • okulary mikroskopowe PZO 15x
  • PZO 15x Okulare Paar 23.2 mm
  • PZO MB-30 / ML-5 eyepieces 15x
  • Carl Zeiss Jena Lg Okulare 15x PZO
  • PZO Okular Pilz - Ersatz
  • okuláry PZO 15x 23.2 mm
  • oculares PZO 15x 23.2 mm
  • oculares 15x para microscopio PZO Biolar
  • oculari PZO 15x 23.2 mm
  • oculari 15x per microscopio PZO Biolar
  • PZO buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

20 €

Name of the category to which this microscope part is classified.

Eyepieces

Abbreviated and full name of the manufacturer of this microscope part.

PZO

Polskie Zaklady Optyczne

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Biolar

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(PZO)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you don't have these eyepieces in your set
  • if you want to replace your poor-quality eyepieces
2026-04-23 19:35:13

810 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99370
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography

The name of this microscope part.

Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography

Description of this part for the microscope.

Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6. ...

3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Semiplan Mikroskopobjektiv 6.3x
  • Carl Zeiss Jena Amplival microscope objective 6.3x
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
  • obiektyw mikroskopowy do fotografowania owadów
  • Carl Zeiss Jena Semiplan Objektiv für Insekten-Makrofotografie
  • Carl Zeiss Jena Semiplan 6.3/0.16 160/- Balgengerät
  • objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
  • objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
  • objetivo 6.3x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
  • obiettivo 6.3x per microscopio PZO Biolar
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

0

Price in EURO for 1 piece of this microscope part. Price is negotiable.

169 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you need a microscope objective for macro photography
  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-04-23 23:11:02

831 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99386
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter

The name of this microscope part.

Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter

Description of this part for the microscope.

Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ...



Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This is an objective designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Lomo MIN-8 microscope repair parts
  • Lomo Polam Mikroskopobjektiv
  • Lomo MIN-8 Pol-Mikroskop Objektiv
  • Lomo petrographic microscope objective
  • Lomo 20 0.40 P Pol Objektiv mit Adapter
  • Lomo 20x polarizing objective with Pol RMS adapter
  • Lomo Polam / MIN-6 Pol objective 20x 33 mm
  • ЛОМО 20 0.40 П объектив
  • polarizační objektiv Lomo 20x
  • objetivo de polarización Lomo 20x
  • objetivo Pol para microscopio Carl Zeiss Jena Lumipan
  • obiettivo polarizzazione Lomo 20x
  • obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
  • obiektyw polaryzacyjny Lomo 20x
  • Lomo buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

49 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Lomo

Leningrad Optical Mechanical Association

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MIN-8

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Lomo)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a polarisation microscope and need an objective lens with this magnification
  • If you only need a slider to use with other objectives
2026-05-01 01:12:25

832 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99387
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography

The name of this microscope part.

Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography

Description of this part for the microscope.

Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ...



Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Lomo MIN-8 microscope repair parts
  • Lomo Polam Mikroskopobjektiv
  • Lomo MIN-8 Pol-Mikroskop Objektiv
  • Lomo petrographic microscope objective
  • Mikroskopobjektiv für Makrofotografie
  • Super-Macro-Photo objective
  • 9:1 Makroobjektiv
  • Lomo Plan 9x 0.20 P Pol Objektiv mit Adapter
  • Lomo 9x polarizing objective with Pol RMS adapter
  • Lomo Polam / MIN-6 Pol objective 9x 33 mm
  • Lomo Plan 9x Makroobjektiv Focus Stacking
  • ЛОМО Plan 9x 0.20 П объектив
  • polarizační objektiv Lomo 9x
  • objetivo de polarización Lomo 9x
  • objetivo Pol para microscopio Carl Zeiss Jena Lumipan
  • obiettivo polarizzazione Lomo 9x
  • obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
  • obiektyw polaryzacyjny Lomo 9x
  • Lomo buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

49 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Lomo

Leningrad Optical Mechanical Association

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MIN-8

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Lomo)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you have a polarization microscope and are missing an objective with this magnification
  • if you only need the slide adapter to use with other objectives
  • if you are looking for an objective for macro photography and focus stacking
2026-05-01 01:52:35

833 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99385
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x

The name of this microscope part.

Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x

Description of this part for the microscope.

Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives. ...



Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective

Names, descriptions, terms, and search contexts under which this part is searched.

  • Lomo MIN-8 microscope repair parts
  • Lomo Polam Mikroskopobjektiv
  • Lomo MIN-8 Pol-Mikroskop Objektiv
  • Lomo petrographic microscope objective
  • Mikroskopobjektiv für Makrofotografie
  • Super-Macro-Photo objective
  • 3.7:1 Makroobjektiv
  • Lomo 3.7 0.11 P Pol Objektiv mit Adapter
  • Lomo 3.7x polarizing objective with Pol RMS adapter
  • Lomo Polam / MIN-6 Pol objective 3.7x 33 mm
  • Lomo 3.7x Makroobjektiv Focus Stacking
  • ЛОМО 3.7 0.11 П объектив
  • polarizační objektiv Lomo 3.7x
  • objetivo de polarización Lomo 3.7x
  • objetivo Pol para microscopio Carl Zeiss Jena Lumipan
  • obiettivo polarizzazione Lomo 3.7x
  • obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
  • obiektyw polaryzacyjny Lomo 3.7x
  • Lomo buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

119 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Lomo

Leningrad Optical Mechanical Association

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

MIN-8

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Lomo)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you have a polarization microscope and are missing an objective with this magnification
  • if you only need the slide adapter to use with other objectives
  • if you are looking for an objective for macro photography and focus stacking
2026-05-01 01:57:27

953 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99500
Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906

The name of this microscope part.

Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906

Description of this part for the microscope.

Microscope objective manufactured by Zeiss West Germany.

Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 16x
Model: Plan 16/0. ...

35 160/0.17
Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906)
Color correction: Planachromat
Numerical aperture N.A.: 0.35
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Standard WL microscope repair parts
  • Zeiss Plan Mikroskopobjektiv
  • Zeiss Standard GFL / WL microscope objective
  • Zeiss Phomi / Universal Mikroskop Objektiv
  • Zeiss West Germany planachromat microscope objective
  • Zeiss Plan 16/0.35 160/0.17 Objektiv 460510-9906
  • Zeiss Standard WL Plan 16x objective 45 mm
  • objektiv Zeiss Plan 16x
  • objetivo Zeiss Plan 16x
  • objetivo 16x para microscopio Carl Zeiss Jena Amplival
  • obiettivo Zeiss Plan 16x
  • obiettivo 16x per microscopio Carl Zeiss Jena Ergaval
  • obiektyw planachromatyczny Zeiss Plan 16x
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

95 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Standard WL

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-06-17 12:23:56

954 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99501
Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904

The name of this microscope part.

Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904

Description of this part for the microscope.

Microscope objective manufactured by Zeiss West Germany.

Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 40x
Model: Plan 40/0. ...

65 160/0.17
Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904)
Color correction: Planachromat
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Standard WL microscope repair parts
  • Zeiss Plan Mikroskopobjektiv
  • Zeiss Standard GFL / WL microscope objective
  • Zeiss Phomi / Universal Mikroskop Objektiv
  • Zeiss West Germany planachromat microscope objective
  • Zeiss Plan 40/0.65 160/0.17 Objektiv 460710-9904
  • Zeiss Standard WL Plan 40x objective 45 mm
  • objektiv Zeiss Plan 40x
  • objetivo Zeiss Plan 40x
  • objetivo 40x para microscopio Carl Zeiss Jena Amplival
  • obiettivo Zeiss Plan 40x
  • obiettivo 40x per microscopio Carl Zeiss Jena Ergaval
  • obiektyw planachromatyczny Zeiss Plan 40x
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

125 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Standard WL

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
  • if you currently have an achromatic microscope objective and want to change it to a plan achromatic one to have a flat image in the full field of view
2026-06-17 12:30:55

987 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99536
Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x

The name of this microscope part.

Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x

Description of this part for the microscope.

Microscope objective manufactured by Leitz Wetzlar with 100x magnification, designed for brightfield and phase contrast work.

Manufacturer: Leitz ...

Wetzlar
Model: 160/0,17 EF 100/1.25 OEL PHACO 3
Magnification: 100x
Correction: semi-plan achromat
Numerical aperture: 1.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: yes, oil
Thread: RMS
Specimen protection: yes - spring-loaded
Info: PHACO 3 = phase contrast

Some important information about this objective:
- the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces
- the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat
- this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm
- the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3")
- this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters).

Names, descriptions, terms, and search contexts under which this part is searched.

  • Leitz Diaplan microscope repair parts
  • Leitz Wetzlar Diaplan Phasenkontrast Mikroskopobjektiv
  • Leitz Wetzlar 100x oil phase contrast microscope objective
  • Leitz Wetzlar Phasenkontrast-Mikroskop
  • Leitz Wetzlar 160 mm Phasenkontrast Kondensor
  • Leitz EF 100/1.25 OEL Phaco 3 Objektiv
  • Leitz Phaco 3 100x oil phase contrast objective 45 mm
  • objektiv fázový kontrast Leitz Phaco 3 100x
  • objetivo contraste de fases Leitz Phaco 3 100x
  • objetivo 100x para microscopio PZO Biolar
  • obiettivo contrasto di fase Leitz Phaco 3 100x
  • obiettivo 100x per microscopio PZO Biolar
  • obiektyw fazowy Leitz Phaco 3 100x
  • Leitz buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

119 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Leitz

Leitz Wetzlar

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Diaplan

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Leitz)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope without objectives and need to restock it using original parts
  • If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
  • If you have such an objective lens, but it's of very poor quality or damaged
  • If you're cautious and want to have a spare objective lens
2026-06-28 14:59:54

1026 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99563
Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm

The name of this microscope part.

Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm

Description of this part for the microscope.

PLAN achromatic polarizing microscope objective Lomo PLAN 25x0.50 P with iris diaphragm for Lomo Polam series polarizing microscopes.

Basic par ...

ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no - this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976

This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.

The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.

Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Lomo Polam L-213 microscope repair parts
  • Lomo Polam POL-Mikroskop Objektiv
  • Lomo Polam Mikroskopobjektiv mit Irisblende
  • Lomo Polam Mikroskop 25x RMS Objektiv
  • Lomo Polam microscope objective
  • Lomo Polam polarizing microscope objective
  • Lomo Polam PLAN 25x0.50 P Objektiv mit Irisblende 45 mm
  • Lomo Polam L-213 plan 25x polarizing objective iris
  • polarizační objektiv Lomo Polam 25x
  • objetivo de polarización Lomo Polam 25x
  • objetivo 25x para microscopio PZO Biolar
  • obiettivo polarizzazione Lomo Polam 25x
  • obiettivo 25x per microscopio PZO Biolar
  • obiektyw polaryzacyjny Lomo Polam 25x z przysłoną
  • Lomo buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

79 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Lomo

Leningrad Optical Mechanical Association

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Polam L-213

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Lomo)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you have a microscope from any manufacturer and this is the objective you are missing
2026-07-12 23:17:10

1173 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

91039
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography, S/N 039562

The name of this microscope part.

Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography, S/N 039562

Description of this part for the microscope.

Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.

Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6. ...

3x
Model: Semiplan 6.3/0.16 160/-
Serial number: 039 562 (039562)
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Amplival microscope repair parts
  • Carl Zeiss Jena Semiplan Mikroskopobjektiv
  • Carl Zeiss Jena Amplival microscope objective
  • Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
  • obiektyw mikroskopowy do fotografowania owadów
  • Mikroskop-Semiplan Objektiv für Insekten-Makrofotografie
  • Carl Zeiss Jena Semiplan 6.3/0.16 160/- RMS
  • CZJ Semiplan 6.3x objective for macro photography with bellows
  • Semiplan 6.3x Makroobjektiv am Balgengerät
  • Semiplan 6.3x focus stacking insects
  • Carl Zeiss Jena Laboval 6.3x Objektiv Ersatz
  • Olympus BHA / CH-2 6.3x RMS objective 45 mm
  • objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
  • objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
  • objetivo 6.3x para microscopio PZO Biolar
  • obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
  • obiettivo 6.3x per microscopio PZO Biolar
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

169 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Amplival

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • If you need a microscope objective for macro photography
  • If you have a microscope from any brand that lacks an objective lens with this magnification
  • If you have such a lens, but it is of very poor quality or damaged
  • If you are cautious and want to have such a lens on hand
2026-09-17 19:25:43

1229 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99823
Nikon TMS / Labophot-2 Microscope Ph3 40 DL 0.55 LWD 160/0-2 Objective | 40x Phase Contrast with Long Working Distance and Correction Collar

The name of this microscope part.

Nikon TMS / Labophot-2 Microscope Ph3 40 DL 0.55 LWD 160/0-2 Objective | 40x Phase Contrast with Long Working Distance and Correction Collar

Description of this part for the microscope.

Achromatic Nikon Ph3 DL 40x / 0.55 LWD microscope objective for brightfield and phase contrast, with 0 - 2.0 mm correction collar, for 160 mm tube length - ...

for inverted and upright biological microscopes, made in Japan.

Basic objective parameters:
Manufacturer: Nikon, Japan
Model: Ph3 40 DL 0.55 LWD 160/0-2
Magnification: 40x
Numerical aperture (N.A.): 0.55
Optical correction: achromat
Phase contrast: Ph3 DL - Ph3 indicates the size of the phase ring (requires a matching Ph3 annulus in the condenser), DL (Dark Low) means dark, i.e. positive phase contrast - the object appears darker than the background
Working distance (WD): ~2.1 - 2.5 mm - LWD (Long Working Distance)
Correction collar: compensates for cover glass or vessel bottom thickness in the range 0 - 2.0 mm
Cover glass: the objective can be used without a cover glass, with a standard cover glass approx. 0.17 mm thick, and also with specimens observed through the bottom of a Petri dish up to 2.0 mm thick
Immersion: no (dry objective)
Tube length: 160 mm
Parfocal length: 45 mm
Thread: RMS
Optics: CF (Nikon CF-160) - requires no compensating eyepiece and allows photography by direct projection

This objective is suitable for:
- inverted microscopes - observation through the bottom of a Petri dish or cell culture flask
- upright biological microscopes - observation of specimens with or without a cover glass

Phase contrast work requires a compatible phase contrast condenser or a slider with a phase contrast annulus.

Commonly used, inexpensive cover glasses are 0.17 mm thick mainly in theory. Even the standard for class #1.5 allows a range of 0.16 - 0.19 mm, and in cheap Chinese cover glasses you will find in practice pieces from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. Variation in cover glass thickness clearly degrades image contrast and resolution (spherical aberration). The correction collar fitted to the objective offered here lets you adjust the optics to the combined thickness of the cover glass and the medium layer beneath it. This compensates for most of the variation found in practice.

In addition, the correction collar of this objective can be set to "0" for work without a cover glass, or to large values (up to 2.0 mm) to adapt the optics to observation through a microscope slide (0.8 - 1.2 mm), a glass Petri dish (usually 1.5 - 2.0 mm - thicker dishes are outside the collar range) or a plastic Petri dish (usually approx. 1 mm, in the range 0.8 - 1.2 mm).

This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and uses objectives for 160 mm tube length with a parfocal length of 33, 37 or 45 mm. Some example microscopes are listed in the "compatibility" section, but the list is not complete.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Nikon TMS microscope repair parts
  • Nikon TMS inverted microscope Ph3 40x LWD objective cell culture
  • Nikon TMS inverses Mikroskop Phasenkontrast Objektiv 40x
  • Nikon CF Ph3 DL 40x 0.55 LWD 160/0-2 objective Petri dish
  • Nikon Ph3 DL 40x Objektiv Petrischale Korrekturring
  • Nikon Labophot-2 phase contrast 40x objective correction collar
  • Nikon Labophot-2 Phasenkontrast Objektiv 40x großer Arbeitsabstand
  • objektiv fázový kontrast Nikon Ph3 DL 40x LWD
  • objetivo contraste de fases Ph3 40x para microscopio PZO Biolar
  • objetivo Nikon Ph3 40x LWD para microscopio LOMO Biolam
  • obiettivo contrasto di fase 40x per microscopio PZO Biolar
  • obiettivo Nikon Ph3 40x LWD per microscopio Carl Zeiss Jena Amplival
  • Nikon buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

100 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Nikon

Nikon Instruments (Nikon Corp.)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

TMS

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Nikon)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if your microscope is missing a 40x objective - for brightfield or phase contrast
  • if you observe cell cultures, algae, protozoa or fungi in Petri dishes on an inverted microscope
  • if a standard 40x objective cannot focus through the thick bottom of a Petri dish or culture flask, or touches the vessel
  • if you want to observe living, unstained specimens in phase contrast
  • if you need an objective with correction for cover glass or vessel bottom thickness
  • if you work with specimens without a cover glass
  • if you want to photograph specimens by direct projection
  • if you already have such an objective, but it is damaged or of very poor quality
2026-09-26 19:59:43

1244 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99845
Carl Zeiss Jena Gleitfett III E410 microscope grease

The name of this microscope part.

Carl Zeiss Jena Gleitfett III E410 microscope grease

Description of this part for the microscope.

Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett III E410.

I have not managed to find any documentation describing how the individual ...

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Carl Zeiss Jena Neophot 21 microscope repair parts
  • Carl Zeiss Jena micromanipulator
  • wymiana smaru Carl Zeiss Jena
  • Carl Zeiss Jena Gleitfett III E410
  • Carl Zeiss Jena microscope grease Gleitfett III E410 original
  • Carl Zeiss Jena Mikroskop neufetten Originalfett
  • Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
  • Carl Zeiss Jena Lumipan / Nf Trieb neufetten
  • Grobtrieb schwergängig - Carl Zeiss Jena Fett
  • stiff focus - Carl Zeiss Jena grease
  • mazivo Carl Zeiss Jena Gleitfett III E410
  • grasa Carl Zeiss Jena Gleitfett III E410
  • grasa para microscopio Carl Zeiss Jena Amplival
  • grasso Carl Zeiss Jena Gleitfett III E410
  • grasso per microscopio Carl Zeiss Jena Lumipan
  • Carl Zeiss Jena buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

35 €

Name of the category to which this microscope part is classified.

Extras

Abbreviated and full name of the manufacturer of this microscope part.

Carl Zeiss Jena

VEB Carl Zeiss Jena DDR (former East Germany)

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Neophot 21

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Carl Zeiss Jena)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • When you need to service your microscope or microscope component and need to replace the lubricants (grease).
2026-09-30 00:37:30

1257 - Thumbnail photo showing this microscope part.

SERMIK_ID number under which this microscope part is placed in the database.

99827
Zeiss Planapo 63x/1.4 Oel 160/- Microscope Objective PN 461840-9901

The name of this microscope part.

Zeiss Planapo 63x/1.4 Oel 160/- Microscope Objective PN 461840-9901

Description of this part for the microscope.

Plan-apochromatic Carl Zeiss oil immersion microscope objective with 63x magnification, for brightfield work on biological microscopes.

Basic parameters of the ...

objective:
Manufacturer: Zeiss West Germany
Engraving on the objective: Planapo 63/1,4 Oel 160/-
Manufacturer catalogue number: 46 18 40 - 9901 (also written as 461840-9901)
Magnification: 63x
Numerical aperture (N.A.): 1.4
Optical correction: plan-apochromatic
Immersion: yes, oil
Coverslip: according to the engraving on the barrel of this objective, it can be used both without a coverslip and with a standard coverslip of 0.17 mm thickness
Tube length: 160 mm
Parfocal distance: 45 mm
Thread: RMS
Specimen protection: yes, the objective has a spring-loaded mechanism preventing the slide with the specimen from being broken
Phase contrast: no - the objective has no phase rings inside
DIC: prisms allowing work in DIC mode are available on the market for this objective (sold separately)

This objective fits practically any microscope of any manufacturer, provided it has an RMS thread and accepts objectives for a 160 mm tube length with a parfocal distance of 33, 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss Standard WL microscope repair parts
  • Zeiss Planapo 63x Oel objective diatoms resolution test
  • Planapo 63x Ölimmersion Objektiv Zeiss Standard Mikroskop
  • Planapo 63x Objektiv Frontlinse gesprungen
  • obiektyw Zeiss Planapo 63x olejowy do okrzemek
  • objektiv Planapo 63x olejová imerze Zeiss
  • objetivo Zeiss Planapo 63x aceite PZO Biolar
  • objetivo 63x aceite microscopio LOMO Biolam
  • obiettivo Zeiss Planapo 63x olio PZO Biolar
  • obiettivo 63x olio microscopio Carl Zeiss Jena Amplival
  • Zeiss buy spare parts

The number of pieces of this microscope part that we have to offer.

1

Price in EURO for 1 piece of this microscope part. Price is negotiable.

249 €

Name of the category to which this microscope part is classified.

Objective

Abbreviated and full name of the manufacturer of this microscope part.

Zeiss

Carl Zeiss West Germany

Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?

Model name of the equipment in which this microscopic part previously operated.

Standard WL

Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.

(Zeiss)

Here it is written whether this part was removed from a microscope or from a larger microscope part.

microscope

List of microscope models this part is compatible with.

A list of potential uses for this part and when it might be needed.

  • if you need a high numerical aperture N.A. objective for bright-field or DIC microscopy
2026-10-03 16:43:55