Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

illumination collector
- potentiometer for light intensity control
- illuminator with halogen lamp
- transformer integrated into the base (Zeiss P/N 392575-9001)
- power cable with EU plug

Description of this part for the microscope.

08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

9904
Magnification: 10x
Correction: achromat
Numerical aperture: 0.22
Tube length: 160 mm
Focal length: 45 mm
Cover glass: indifferent
Immersion: no
Thread: RMS
Ph1: phase contrast

This specific unit was used in an inverted Zeiss ID 02 microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes.

Objectives with such low magnification (here 10x) can be used without a cover glass, with a cover glass, or for observation through thicker glass (e.g. through a Petri dish), therefore they can be used both in upright and inverted microscopes.

It can be used with any microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

This particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot

Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-retaining screws. These were not necessarily spring-loaded screws - in some cases ordinary threaded clamping screws were used instead.

Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/

Description of this part for the microscope.

particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot

Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-centering screws. These were not necessarily this type - in some cases ordinary threaded clamping screws were used instead.

Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/

In the last photos in the gallery, I use arrows to show exactly which microscope component is being offered and where it is in the microscope located .

Description of this part for the microscope.

field lens (Zeiss P/N 47 30 68). It can be installed in the tube between the objective nosepiece and the observation head. The lens is operated by a lever protruding from the side of the tube. In the manufacturer's documentation, this lever is referred to as "Switch to turn axis, e.g. with wide field changer 0.8x-1x". If this optional microscope component is not installed, the opening intended for the lever is closed with a plastic blanking plug additionally secured by a retaining screw. This listing includes exactly that end cap and screw.

This particular cover was removed from a Zeiss Standard 14 microscope, which is not normally equipped with the lever-operated lens. However, it will most likely fit the majority of other Standard series models, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89

The blanking plug itself carries the catalog number Zeiss 47 30 65 (alternative notation: Zeiss 473065) and is described as an "intermediate tube cover element".

Not only is this plastic cap frequently lost over the years, but the lever itself or the lens assembly may also become damaged and require removal. In such cases, this blanking plug should be installed to protect the microscope optics from dust.

In the last photographs in the gallery, I use arrows to show exactly which microscope component is being offered and where it is located within the microscope.

Description of this part for the microscope.

35 160/0.17
Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906)
Color correction: Planachromat
Numerical aperture N.A.: 0.35
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Description of this part for the microscope.

65 160/0.17
Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904)
Color correction: Planachromat
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Description of this part for the microscope.

supply:
Manufacturer: Carl Zeiss
Model: NAG 6V 20W stab.
Catalogue number: 45 84 15 - 9901
Input: 100-120-230-240 V
Output: 6 V
Output power: two outputs. It can supply either 2 × 10 W or 1 × 20 W
Power connector: separate computer-type power cable
Potentiometer: yes, smooth adjustment

This power supply has a maximum output power of 20 W and provides two outputs, allowing two 10 W illuminators to be connected and operated simultaneously.

However, it is a universal power supply and can be used with any microscope illuminator using a light source (lamp) rated at up to 20 W and operating at 6 V. Since most Zeiss microscopes use 6 V 15 W lamps, this power supply is suitable for virtually every microscope equipped with such illumination.

This power supply is most commonly used with microscopes employing 6 V 10 W halogen lamps, where both the transmitted-light illuminator and the reflected-light EPI illuminator are connected to the same power supply. Examples include:
- Zeiss D / DR / DRC / SV (Stemi) stereo microscopes
- Zeiss KF-2 biological microscope
- Zeiss ID2 inverted microscope

Special illuminators designed to work with this power supply were even manufactured for the Zeiss D / DR / DRC stereo microscopes:
- transmitted-light base "Zusatz für Durchlicht" with a 10 W halogen lamp
- auxiliary illuminators "Leuchte 10" / "Leuchte 10 S" with a 10 W halogen lamp
- vertical illuminator "Epileuchte" with a 15 W incandescent lamp

"Leuchte 10S" illuminators on a flexible arm, together with this particular power supply, are frequently used as a source of side reflected illumination for the Zeiss KF-2 biological microscope.

Examples of other microscopes whose 6 V 15 W illumination is compatible with this power supply:
- Zeiss Standard 16 / WL / GFL
- Zeiss Universal / Photomicroscope
- PZO Biolar
- PZO MST-130 / 131
- Carl Zeiss Jena Ergaval / Amplival
- Carl Zeiss Jena SM-xx
- this power supply can also be used externally to power the halogen illuminator of Carl Zeiss Jena Jenamed microscopes if the internal power supply fails (Jenamed uses a 6 V 20 W halogen lamp)

Note – different manufacturers and different illuminators may use different pin spacing in their 6 V connectors. It may therefore be necessary to modify the connector in order to connect it to this Zeiss power supply.

Description of this part for the microscope.

removed from a Zeiss Standard GFL microscope, but it also fits condenser holders used, among others, in the following microscopes:
- Zeiss Standard 14 / 16 / 18
- Zeiss Standard WL / WL 89
- Zeiss Universal
- Zeiss Photomicroscope (Zeiss PM / Phomi – all models)
- Zeiss Ultraphot

In these microscope models, the condenser has a dovetail mounting ring. This dovetail includes a notch into which the spring-loaded screw presented here engages. You can see what this mounting ring looks like and how the notch is shaped in the photo gallery of item No. 99625 in this database.

Description of this part for the microscope.

number: 46 07 01 - 9903
Magnification: 40x
Correction: achromatic
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: no
Thread: RMS
Ph2: phase contrast

This particular specimen was used in a Zeiss KM microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes. It fits many microscope models from this manufacturer; some examples are listed in the "compatibility" section.

It can be used with any microscope from any manufacturer together with a suitable phase-contrast condenser (or a phase-ring slider). Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=45 mm.