|
|
SERMIK_ID number under which this microscope part is placed in the database.
00671
|
Carl Zeiss Jena Gleitfett I E10 microscope grease
|
|
Description of this part for the microscope.
Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett I E10.
I have not managed to find any documentation describing how the individual
...
Gleitfett grades differ in their parameters.
Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.
This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.
This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts
- Carl Zeiss Jena micromanipulator
- wymiana smaru Carl Zeiss Jena
- Carl Zeiss Jena Gleitfett I E10
- Carl Zeiss Jena microscope grease Gleitfett I E10 original
- Carl Zeiss Jena Mikroskop neufetten Originalfett
- Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
- Carl Zeiss Jena Lumipan / Nf Trieb neufetten
- Grobtrieb schwergängig - Carl Zeiss Jena Fett
- stiff focus - Carl Zeiss Jena grease
- mazivo Carl Zeiss Jena Gleitfett I E10
- grasa Carl Zeiss Jena Gleitfett I E10
- grasa para microscopio Carl Zeiss Jena Amplival
- grasso Carl Zeiss Jena Gleitfett I E10
- grasso per microscopio Carl Zeiss Jena Lumipan
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Extras
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIPU micrurgy equipments
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
part
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
When you need to service your microscope or microscope component and need to replace the lubricants (grease).
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00672
|
Carl Zeiss Jena Gleitfett II E75 microscope grease
|
|
Description of this part for the microscope.
Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett II E75.
I have not managed to find any documentation describing how the individual
...
Gleitfett grades differ in their parameters.
Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.
This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.
This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts
- Carl Zeiss Jena micromanipulator
- wymiana smaru Carl Zeiss Jena
- Carl Zeiss Jena Gleitfett II E75
- Carl Zeiss Jena microscope grease Gleitfett II E75 original
- Carl Zeiss Jena Mikroskop neufetten Originalfett
- Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
- Carl Zeiss Jena Lumipan / Nf Trieb neufetten
- Grobtrieb schwergängig - Carl Zeiss Jena Fett
- stiff focus - Carl Zeiss Jena grease
- mazivo Carl Zeiss Jena Gleitfett II E75
- grasa Carl Zeiss Jena Gleitfett II E75
- grasa para microscopio Carl Zeiss Jena Amplival
- grasso Carl Zeiss Jena Gleitfett II E75
- grasso per microscopio Carl Zeiss Jena Lumipan
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Extras
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIPU micrurgy equipments
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
part
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
When you need to service your microscope or microscope component and need to replace the lubricants (grease).
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99091
|
EMO Optik Wetzlar 75:1 0,82 microscope objective | dry RMS 75x Seibert Optik Wetzlar
|
|
Description of this part for the microscope.
A very rarely encountered microscope objective from EMO Optik Wetzlar, available on the secondary market.
Basic parameters:
Manufacturer: EMO Optik Wetzlar
...
(Arthur Seibert)
Model: 75:1 0.82
Correction: achromatic
Magnification: 75x
Aperture: N.A. 0.82
Thread: RMS
Parfocal length: 45 mm
Tube length: 170 mm (most likely)
Immersion: no | dry objective | air
The description states that the tube length is most likely 170 mm. Most objectives produced in the 1950s-1970s in the so-called "Wetzlar microscope center" followed a common 170 mm standard. The company "EMO Optik" was founded by Arthur Seibert, who was trained and worked at Leitz, which suggests the use of the 170 mm standard commonly used by Leitz at that time.
There is very little information available about microscopes manufactured by EMO Optik Wetzlar, therefore the exact microscope model from which this objective originates is unfortunately unknown.
Names, descriptions, terms, and search contexts under which this part is searched.
- EMO model microscope repair parts
- EMO Wetzlar Mikroskopobjektiv 75x
- EMO Optik Wetzlar 75x Mikroskop Objektiv
- EMO Wetzlar 75x microscope objective
- Arthur Seibert Optik Wetzlar 75x Objektiv
- EMO Optik Wetzlar 75:1 0.82 dry RMS objective
- Leitz SM 75x RMS Objektiv 170 mm
- Leitz Ortholux II / Orthoplan 75x objective
- EMO 75x Frontlinse zerkratzt - Ersatz
- objektiv 75x EMO Optik Wetzlar
- objetivo 75x EMO Optik Wetzlar
- objetivo 75x para microscopio Leitz SM
- obiettivo 75x EMO Optik Wetzlar
- obiettivo 75x per microscopio Leitz SM
- EMO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
EMO
EMO Optik Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
model
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(EMO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an EMO Wetzlar microscope and are completing it with original parts
-
if you have another microscope with a 170 mm tube length and want to use high-quality optics
-
...
-
if you are a collector and want to add such a rare item to your collection
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99095
|
Leitz Wetzlar HBO fluorescence lamp holder | mercury burner socket
|
|
Description of this part for the microscope.
Holder / connector for mounting an HBO mercury burner (fluorescence lamp) in a Leitz Wetzlar / Leica microscope illuminator.
Note - Leitz Wetzlar / Leica produced
...
dozens of fluorescence illuminator models. Many of them use the same type of lamp holder, but not all. Unfortunately, the catalog number of the illuminator to which this holder fits is unknown.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Diaplan microscope repair parts
- Leitz Wetzlar Mikroskop HBO Lampenfassung fehlt
- Leica Halter für Quecksilberbrenner
- Leitz microscope mercury burner socket is broken
- Leitz Wetzlar HBO fluorescence lamp holder is missing
- Leitz Diaplan / Orthoplan HBO Brennerhalter
- Leitz Ortholux II mercury lamp socket
- objímka výbojky HBO Leitz Wetzlar
- portalámparas HBO Leitz Wetzlar
- soporte quemador de mercurio microscopio Leitz
- portalampada HBO Leitz Wetzlar
- supporto bruciatore al mercurio microscopio Leitz
- oprawka palnika rtęciowego HBO do mikroskopu Leitz
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Diaplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a suitable illuminator (illuminator housing) but the HBO lamp holder is damaged or missing
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99140
|
Leitz Orthoplan - PLEZY 8 mm microscope objective Extender Adapter
|
|
Description of this part for the microscope.
The Leitz PLEZY is an extension adapter for RMS-thread microscope objectives that increases the parfocal focal length from 37 mm to 45 mm, making older objectives
...
compatible with microscopes designed for a 45 mm parfocal standard It is mounted between the objective and the nosepiece/revolver so that optical focus is maintained despite the additional mechanical extension.
Leitz PLEZY differs from extension adapters available on the market in that it features internal anti-reflective optics, ensuring that despite the mechanical extension of the focal length the image quality is not degraded.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz PLEZY RMS objective focal length adapter
- Leitz PLEZY Mikroskopobjektiv Verlängerungs-Adapter
- Wie verlängert man ein Mikroskopobjektiv?
- Can I mount a short Microscope objective to a microscope?
- Leitz PLEZY 8 mm Objektiv Verlängerung 37 auf 45 mm
- Leitz Orthoplan / Ortholux II objective extender 37 to 45 mm
- Carl Zeiss Jena Amplival / Ergaval 37 mm Objektiv auf 45 mm
- PZO Biolar short objective extension adapter
- prodlužovací adaptér objektivu Leitz PLEZY 8 mm
- adaptador extensor de objetivo Leitz PLEZY 37 a 45 mm
- adaptador para objetivos cortos microscopio PZO Biolar
- adattatore prolunga obiettivo Leitz PLEZY 37 a 45 mm
- adattatore per obiettivi corti microscopio PZO Biolar
- przedłużka obiektywu Leitz PLEZY 37 na 45 mm
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you want to use older microscope objectives (those with a length of 37 mm) on a newer microscope that requires objectives with a length of 45 mm
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99141
|
Lomo APO-WI-F 70x1,23 microscope objective | Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972
|
|
Description of this part for the microscope.
Microscope objective with RMS thread with 70x magnification, very high numerical aperture, equipped with a correction ring for cover glass thickness, designed for water
...
immersion operation and with a phase contrast ring.
Manufacturer: Lomo
Model: APO-WI-F 70x1,23
Magnification: 70x
Numerical aperture: 1,23
Correction: Apochromat
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes - water
Cover glass: yes - thickness from 0.10 to 0.20 mm
Markings: APO = Apochromat, WI = water immersion, F = phase contrast
Thread: RMS
Year of production: 1972
Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653).
This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional:
- water immersion is preferred by many users over oil immersion
- very high numerical aperture, allowing the objective to produce a high resolution image
- cover glass thickness correction ring
Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness.
Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye".
Although this objective is a so-called "short" objective, meaning with a parfocal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a parfocal length of 45 mm.
The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MBB-1 microscope repair parts
- Lomo MBB-1A microscope objective
- Lomo Apochromat Mikroskopobjektiv
- Lomo water immersion microscope objective 70x
- Lomo Apochromatisches Mikroskopobjektiv
- Lomo 70x 1.23 water immersion microscope objective cover glass correction ring
- Lomo APO-WI-F 70x 1.23 Phasenkontrast Wasserimmersion
- Lomo Biolam 70x Apochromat Objektiv 33 mm
- Bresser Biolam APO 70x Objektiv
- Carl Zeiss Jena Lumipan / Nf 70x water immersion objective
- Leitz Orthoplan RMS apochromat 70x
- ЛОМО АПО-ВИ-Ф 70х объектив
- apochromatický objektiv LOMO APO-WI-F 70x a Zeiss Jena
- objetivo apocromático LOMO 70x inmersión en agua
- objetivo 70x para microscopio Lomo Biolam
- obiettivo apocromatico LOMO 70x ad immersione in acqua
- obiettivo 70x per microscopio Carl Zeiss Jena Lumipan
- obiektyw immersyjny wodny LOMO APO-WI-F 70x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
159 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MBB-1
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 70x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1972 (the serial number begins with "72") and want original-era objectives
-
If you don't like oil immersion but want better image quality than standard, dry 60x / 63x objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99138
|
Kosmos Stuttgart 50:1 N.A. 0,82 vintage 50x microscope objective
|
|
Description of this part for the microscope.
Microscope objective for older microscopes (so called antique, vintage microscopes).
Manufacturer: Kosmos-Stuttgart
Model: 50:1 N.A.0.82
Magnification:
...
50x
Thread: RMS
Tube length: 170 mm (?)
Focal length: 37 mm
At that time (most likely in the 1960s) the objectives mounted in microscopes from different manufacturers looked very similar. Many microscope manufacturers ordered objectives from large optics manufacturers (e.g. Leitz Wetzlar) and then only engraved their own names on them. Compare this objective with another one which in the database has number 00618).
Because of this, these objectives can be used with microscopes from many other manufacturers.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Modell C microscope repair parts
- Kosmos-Stuttgart Mikroskop Objektiv 50x
- vintage Kosmos-Stuttgart microscope objective 50x
- Hertel & Reuss Mikroskop Objektiv 50x Kosmos
- Kosmos Humboldt Mikroskop Objektiv
- Kosmos Stuttgart 50:1 N.A. 0.82 Objektiv 37 mm
- Kosmos Modell C 50x objective RMS
- Leitz SM 50x Objektiv 37 mm
- antikes Kosmos Mikroskop Objektiv Sammler
- Kosmos 50x Frontlinse zerkratzt - Ersatz
- objektiv 50x Kosmos Stuttgart
- objetivo 50x Kosmos Stuttgart
- objetivo antiguo de microscopio Kosmos
- obiettivo 50x Kosmos Stuttgart
- obiettivo microscopio d'epoca Kosmos
- obiektyw mikroskopowy Kosmos Stuttgart 50x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
45 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Modell C
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
for people who want to complete their incomplete vintage microscope with period parts
-
if your microscope lacks a 50x objective
-
if you have a 50x objective damaged or in poor condition
-
...
-
if you have a microscope from any manufacturer that supports TL=170 FL=37 objectives, this is also a lens for you
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99148
|
Leitz Wetzlar Npl 40/0,65 170/0,17 microscope objective 40x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 40x
Color correction: NPL-achromat
Numerical aperture: 0.65
Tube length: 170 mm
Focal length: 45
...
mm
Cover glass: 0,17 mm
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Ortholux II microscope repair parts
- Leitz Orthoplan 40x microscope objective
- Leitz Wetzlar 40x Mikroskopobjektiv
- Leitz Ortholux NPlan Objektiv 40x
- Leitz Wetzlar NPl 40/0.65 170/0.17 Objektiv
- Leica NPl 40/0.65 170/0.17 N Plan objective 170 mm
- Leitz SM-LUX / SM 40x Objektiv 45 mm
- Meopta DD 37 BN 40x objective
- Leitz 40x Frontlinse zerkratzt - Ersatz
- objektiv Leitz NPl 40/0.65 170/0.17
- objetivo Leitz NPl 40/0.65 170/0.17
- objetivo 40x microscopio Leitz Orthoplan
- obiettivo Leitz NPl 40/0.65 170/0.17
- obiettivo 40x microscopio Leitz Orthoplan
- obiektyw planachromatyczny Leitz 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Ortholux II
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99149
|
Leitz Wetzlar Pl 40/0,65 170/0,17 microscope objective 40x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 40x
Color correction: Plan-achromat
Numerical aperture: 0.65
Tube length: 170 mm
Focal length:
...
45 mm
Cover glass: 0,17 mm
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Orthoplan 40x microscope objective
- Leitz Wetzlar 40x Mikroskopobjektiv
- Leitz Ortholux Plan Objektiv 40x
- Leitz Wetzlar Pl 40/0.65 170/0.17 Objektiv
- Leica Pl 40/0.65 170/0.17 plan achromat objective 170 mm
- Leitz SM-LUX / SM 40x Objektiv 45 mm
- Meopta DD 37 BN 40x objective
- Leitz 40x Frontlinse zerkratzt - Ersatz
- objektiv Leitz Pl 40/0.65 170/0.17
- objetivo Leitz Pl 40/0.65 170/0.17
- objetivo 40x microscopio Leitz Orthoplan
- obiettivo Leitz Pl 40/0.65 170/0.17
- obiettivo 40x microscopio Leitz Orthoplan
- obiektyw planachromatyczny Leitz 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a PLAN objective.
-
If you have a microscope without objectives and need to restock it using original parts
-
...
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99150
|
Leitz Wetzlar Pl Fl 10/0,30 170/- microscope objective 10x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 10x
Color correction: Plan-fluotar
Numerical aperture: 0.30
Tube length: 170 mm
Focal length: 45
...
mm
Cover glass: no
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Orthoplan 10x microscope objective
- Leitz Wetzlar 10x Mikroskopobjektiv
- Leitz Ortholux Plan-Fluor Objektiv 10x
- Leitz Wetzlar Pl Fl 10/0.30 170/- Objektiv
- Leica Pl Fl 10/0.30 170/- plan fluorite objective 170 mm
- Leitz SM-LUX / SM 10x Objektiv 45 mm
- Meopta DD 37 BN 10x objective
- Leitz 10x Frontlinse zerkratzt - Ersatz
- objektiv Leitz Pl Fl 10/0.30 170/-
- objetivo Leitz Pl Fl 10/0.30 170/-
- objetivo 10x microscopio Leitz Orthoplan
- obiettivo Leitz Pl Fl 10/0.30 170/-
- obiettivo 10x microscopio Leitz Orthoplan
- obiektyw planfluorytowy Leitz 10x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
89 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a Plan-Fluor objective.
-
If you have a microscope without objectives and need to restock it using original parts
-
...
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99281
|
Leitz Orthoplan lamp housing 100 microscope illuminator
|
|
Description of this part for the microscope.
Leitz Wetzlar Orthoplan microscope illuminator.
Manufacturer's catalog name: lamp housing 100
Manufacturer's instructions: https://www.science-info.
...
net/docs/leitz/Leitz100-100z.pdf
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Wetzlar Orthoplan microscope illuminator lamp housing 100
- Leitz Orthoplan Lampenhaus 100
- Leitz Orthoplan Mikroskop Lampe
- Leitz Orthoplan Mikroskop 100W Beleuchtung
- Leitz Orthoplan Lampenhaus defekt - Ersatz
- osvětlovač Leitz Orthoplan 100
- portalámparas Leitz Orthoplan 100
- iluminador microscopio Leitz Orthoplan
- portalampada Leitz Orthoplan 100
- illuminatore microscopio Leitz Orthoplan
- oświetlacz mikroskopu Leitz Orthoplan
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
120 €
|
Name of the category to which this microscope part is classified.
Illuminators
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Leitz Wetzlar microscope and you need an illuminator
-
if you have such an illuminator but it is of very poor quality or damaged, for example as a result of a light source explosion
-
...
-
if you want to adapt this illuminator to another microscope
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99286
|
Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 20/0.
...
40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0.40
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Interestingly, despite its 20x magnification, this microscope objective is marked as requiring no coverslip.
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 20x Objektiv für ein Mikroskop
- Kosmos Stuttgart 20x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 20x
- Kosmos Stuttgart 20/0.40 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 20x objective
- Hertel & Reuss Studio C 20x Objektiv 170 mm
- Kosmos 20x Frontlinse zerkratzt - Ersatz
- objektiv 20x Kosmos Stuttgart
- objetivo 20x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 20x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 20x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 20x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99287
|
Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 10/0.
...
30
Magnification: 10x
Correction: Achromat
Numerical Aperture: 0.30
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 10x Objektiv für ein Mikroskop
- Kosmos Stuttgart 10x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 10x
- Kosmos Stuttgart 10/0.30 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 10x objective
- Hertel & Reuss Studio C 10x Objektiv 170 mm
- Kosmos 10x Frontlinse zerkratzt - Ersatz
- objektiv 10x Kosmos Stuttgart
- objetivo 10x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 10x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 10x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 10x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99288
|
Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 30/0.
...
55
Magnification: 30x
Correction: Achromat
Numerical Aperture: 0.55
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Interestingly, despite its 30x magnification, this microscope objective is marked as requiring no coverslip.
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 30x Objektiv für ein Mikroskop
- Kosmos Stuttgart 30x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 30x
- Kosmos Stuttgart 30/0.55 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 30x objective
- Hertel & Reuss Studio C 30x Objektiv 170 mm
- Kosmos 30x Frontlinse zerkratzt - Ersatz
- objektiv 30x Kosmos Stuttgart
- objetivo 30x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 30x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 30x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 30x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99289
|
Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/0.17 63/0.
...
85
Magnification: 63x
Correction: Achromat
Numerical Aperture: 0.85
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: Yes, 0.17 mm
Immersion: No (dry)
Thread: RMS
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 63x Objektiv für ein Mikroskop
- Kosmos Stuttgart 63x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 63x
- Kosmos Stuttgart 63/0.85 170/0.17 RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 63x objective
- Hertel & Reuss Studio C 63x Objektiv 170 mm
- Kosmos 63x Frontlinse zerkratzt - Ersatz
- objektiv 63x Kosmos Stuttgart
- objetivo 63x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 63x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 63x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good dry 63x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00779
|
Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x
|
|
Description of this part for the microscope.
Carl Zeiss (Germany) microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss (Germany)
Magnification: 2,5x
Model: Plan 2,5/0,
...
08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.
Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.
A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan 2.5/0.08 160/- Mikroskopobjektiv
- Carl Zeiss Standard GFL microscope objective 2.5x
- Carl Zeiss Universal Mikroskop Objektiv mit kleiner Vergrößerung
- Carl Zeiss Phomi Weitfeld Mikroskopobjektiv 2.5x
- Zeiss Großfeld Mikroskopobjektiv für Pathologie
- Zeiss Übersichtsobjektiv 2.5x
- obiektyw mikroskopowy do obserwacji owadów
- Zeiss Plan 2.5x Objektiv für Insektenuntersuchung
- Carl Zeiss Jena Amplival / Ergaval 2.5x objective 45 mm
- objektiv Zeiss Plan 2.5x
- objetivo Zeiss Plan 2.5x panorámico
- objetivo 2.5x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 2.5x panoramico
- obiettivo 2.5x per microscopio Carl Zeiss Jena Ergaval
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99323
|
Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss West Germany
Model: Ph2 40 0,65
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal
...
Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Universal microscope repair parts
- Carl Zeiss Standard GFL Ph2 Phasenkontrast Mikroskopobjektiv 40x
- Carl Zeiss 40x phase contrast microscope objective Ph2
- Zeiss Universal / Phomi Ph2 40 0.65 Objektiv
- Carl Zeiss Photomikroskop Ph2 Phasenkontrast Objektiv
- Zeiss Standard WL Ph2 40x objective 45 mm
- Carl Zeiss Jena Nf Ph2 phase objective 40x
- PZO Biolar Phasenkontrast Objektiv 40x Zeiss
- objektiv fázový kontrast Zeiss Ph2 40x
- objetivo contraste de fases Zeiss Ph2 40x
- objetivo Ph2 40x para microscopio PZO Biolar
- obiettivo contrasto di fase Zeiss Ph2 40x
- obiettivo Ph2 40x per microscopio PZO Biolar
- obiektyw fazowy Zeiss Ph2 40x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Universal
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99324
|
Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss West Germany
Model: Ph3 100 1,25 Oel
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,25
Tube Length: 160
...
mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Universal microscope repair parts
- Carl Zeiss Standard GFL Ph3 Phasenkontrast Mikroskopobjektiv 100x
- Carl Zeiss 100x phase contrast microscope objective Ph3
- Zeiss Universal / Phomi Ph3 100 1.25 Oel Objektiv Öl
- Carl Zeiss Photomikroskop Ph3 Phasenkontrast Objektiv
- Zeiss Standard WL Ph3 100x objective 45 mm
- Carl Zeiss Jena Nf Ph3 phase objective 100x
- PZO Biolar Phasenkontrast Objektiv 100x Zeiss
- objektiv fázový kontrast Zeiss Ph3 100x
- objetivo contraste de fases Zeiss Ph3 100x
- objetivo Ph3 100x para microscopio PZO Biolar
- obiettivo contrasto di fase Zeiss Ph3 100x
- obiettivo Ph3 100x per microscopio PZO Biolar
- obiektyw fazowy Zeiss Ph3 100x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Universal
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99330
|
Leitz Wetzlar PHACO2 40/0.65 160/0,17 phase contrast microscope objective 40x PN 519759
|
|
Description of this part for the microscope.
Microscope objective RMS by Leitz Wetzlar (Leica) for phase contrast.
Basic parameters:
Manufacturer: Leitz Wetzlar Germany
Model: PHACO2 160/0,17 40/0,
...
65
Leitz P/N: 519759
Magnification: 40x
Numerical aperture: 0.65
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no (dry, air)
Info: phase contrast PHACO 2
The same objective model was also sold under the name "Leica" instead of "Leitz" on the housing, so these are in fact identical objectives. This objective also fits Will Wetzlar microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz HM-LUX 3 microscope repair parts
- Leitz Wetzlar 40x phase contrast objective
- Leica 40x phase contrast microscope objective
- Leitz Mikroskop 40x Phasenkontrast Mikroskopobjektiv
- Leitz PHACO 2 40/0.65 160/0.17 Objektiv 519759
- Leitz HM-LUX 3 / Laborlux S Phaco 2 objective 40x
- Leitz Orthoplan / Diaplan Phasenkontrast 40x
- Leitz Phaco 40x Frontlinse zerkratzt - Ersatz
- objektiv fázový kontrast Leitz Phaco 2 40x
- objetivo contraste de fases Leitz Phaco 2 40x
- objetivo Leitz 519759
- obiettivo contrasto di fase Leitz Phaco 2 40x
- obiettivo Leitz 519759
- obiektyw fazowy Leitz Phaco 2 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
HM-LUX 3
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope lacks a 40x phase contrast objective
-
if you have a 40x PHACO2 objective damaged or in poor condition
-
if you have a microscope from any manufacturer that supports TL=160 FL=45 objectives, this is also a lens for you
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99335
|
PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x
|
|
Description of this part for the microscope.
Polarization-interference microscope objective by PZO
Basic parameters:
Manufacturer: PZO Poland
Model: 10/0,24 PI 160/-
Magnification:
...
10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).
Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).
VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.
Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.
It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO Biolar DIC microscope repair parts
- PZO Biolar DIC PI Polarisation-Interferenz Mikroskopobjektiv
- PZO UPI Pluta polarisation interference microscope objective
- obiektyw PZO polaryzacyjno-interferencyjny
- PZO Biolar DIC 10/0.24 PI 160/- Objektiv
- PZO Biolar DIK 10x Objektiv 45 mm
- Carl Zeiss Jena Nf DIC Pluta 10x objective
- Olympus CH-2 DIC objective PZO
- objektiv PZO Biolar PI 10x
- objetivo de interferencia PZO Biolar PI 10x
- objetivo DIC Pluta para microscopio PZO Biolar
- obiettivo a interferenza PZO Biolar PI 10x
- obiettivo DIC Pluta per microscopio PZO Biolar
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolar DIC
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it
-
if you need a polarization-interference objective for your own purposes
-
...
-
if you have such an objective but it is of very poor quality or damaged
-
if you want to keep such an objective as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99365
|
Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 3,2x
Model: Planachromat 3,2/0,
...
10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.
Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.
A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 3.2x
- Carl Zeiss Jena Amplival microscope objective 3.2x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 3.2x
- Carl Zeiss Jena Planachromat 3.2/0.10 160/- Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 3.2x
- Carl Zeiss Jena Übersichtsobjektiv für Pathologie
- Carl Zeiss Jena 3.2x objective for insects
- Carl Zeiss Jena 3.2x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 3.2x
- objetivo Carl Zeiss Jena Planachromat 3.2x
- objetivo 3.2x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 3.2x
- obiettivo 3.2x per microscopio PZO Biolar
- obiektyw mikroskopowy do obserwacji owadów Carl Zeiss Jena 3.2x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99366
|
Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 10x
Model: Planachromat 10/0,25 160/-
...
Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 10x
- Carl Zeiss Jena Amplival microscope objective 10x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 10x
- Carl Zeiss Jena Planachromat 10/0.25 160/- Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 10x
- Lomo Biolam plan Mikroskopobjektiv 10x
- Carl Zeiss Jena 10x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 10x
- objetivo Carl Zeiss Jena Planachromat 10x
- objetivo 10x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 10x
- obiettivo 10x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 10x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99367
|
Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 16x
Model: Planachromat 16/0,32 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 16x
- Carl Zeiss Jena Amplival microscope objective 16x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 16x
- Carl Zeiss Jena Planachromat 16/0.32 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 16x
- Lomo Biolam plan Mikroskopobjektiv 16x
- Carl Zeiss Jena 16x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 16x
- objetivo Carl Zeiss Jena Planachromat 16x
- objetivo 16x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 16x
- obiettivo 16x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 16x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99368
|
Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 40x
Model: Planachromat 40/0,65 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 40x
- Carl Zeiss Jena Amplival microscope objective 40x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 40x
- Carl Zeiss Jena Planachromat 40/0.65 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 40x
- Lomo Biolam plan Mikroskopobjektiv 40x
- Carl Zeiss Jena 40x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 40x
- objetivo Carl Zeiss Jena Planachromat 40x
- objetivo 40x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 40x
- obiettivo 40x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 40x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99369
|
Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 100x
Model: Planachromat HI 100/1,25 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 100x
- Carl Zeiss Jena Amplival microscope objective 100x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 100x
- Carl Zeiss Jena Planachromat HI 100/1.25 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 100x
- Carl Zeiss Jena 100x Ölimmersion Objektiv
- Carl Zeiss Jena 100x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 100x
- objetivo Carl Zeiss Jena Planachromat 100x
- objetivo 100x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 100x
- obiettivo 100x per microscopio PZO Biolar
- obiektyw immersyjny Planachromat Carl Zeiss Jena 100x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99371
|
PZO 5xH microscope eyepieces 23,2 mm (pair)
|
|
Description of this part for the microscope.
Pair (two pieces) of microscope eyepieces.
Manufacturer: PZO
Magnification: 5x
Model: PZO 5xH
Type: Huygens
Mounting Diameter: 23.2 mm
These
...
eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO Studar microscope repair parts
- PZO Biolar microscope eyepieces 5x
- PZO Studar Mikroskop Okulare 5x
- okulary mikroskopowe PZO 5x
- PZO 5xH Huygens Okulare Paar 23.2 mm
- PZO MB-30 / ML-5 eyepieces 5x
- Carl Zeiss Jena Lg Okulare 5x PZO
- PZO Okular Pilz - Ersatz
- okuláry PZO 5x 23.2 mm
- oculares PZO 5x 23.2 mm
- oculares 5x para microscopio PZO Biolar
- oculari PZO 5x 23.2 mm
- oculari 5x per microscopio PZO Biolar
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
10
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
19 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Studar
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you don't have these eyepieces in your set
-
if you want to replace your poor-quality eyepieces
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99372
|
PZO 15x microscope eyepieces 23,2 mm (pair)
|
|
Description of this part for the microscope.
Pair (two pieces) of microscope eyepieces.
Manufacturer: PZO
Magnification: 15x
Mounting Diameter: 23.2 mm
These eyepieces can be used with
...
microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO Biolar microscope repair parts
- PZO Biolar microscope eyepieces 15x
- PZO Studar Mikroskop Okulare 15x
- okulary mikroskopowe PZO 15x
- PZO 15x Okulare Paar 23.2 mm
- PZO MB-30 / ML-5 eyepieces 15x
- Carl Zeiss Jena Lg Okulare 15x PZO
- PZO Okular Pilz - Ersatz
- okuláry PZO 15x 23.2 mm
- oculares PZO 15x 23.2 mm
- oculares 15x para microscopio PZO Biolar
- oculari PZO 15x 23.2 mm
- oculari 15x per microscopio PZO Biolar
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
20 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolar
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you don't have these eyepieces in your set
-
if you want to replace your poor-quality eyepieces
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99370
|
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography
|
|
Description of this part for the microscope.
Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6.
...
3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This is one of the most commonly used microscope objectives for macro photography and focus stacking.
Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Semiplan Mikroskopobjektiv 6.3x
- Carl Zeiss Jena Amplival microscope objective 6.3x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
- obiektyw mikroskopowy do fotografowania owadów
- Carl Zeiss Jena Semiplan Objektiv für Insekten-Makrofotografie
- Carl Zeiss Jena Semiplan 6.3/0.16 160/- Balgengerät
- objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
- objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
- objetivo 6.3x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
- obiettivo 6.3x per microscopio PZO Biolar
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
169 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need a microscope objective for macro photography
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99439
|
PZO set of 4 microscope filters 32 mm matte, green, blue and yellow | compatible with Carl Zeiss Jena
|
|
Description of this part for the microscope.
Set of four microscope filters by PZO with standard 32 mm diameter.
This filter set consists of four filters:
- frosted glass (milk glass filter,
...
diffuser)
- blue
- yellow
- green
New (usually Chinese) microscope filters are sometimes not even made of glass. And even if they are made of glass - you may encounter scandalous examples where the glass is only surface-colored. Unfortunately, cheap colored glass filters may not be internally homogeneous and can cause light refraction distortions.
This filter set by PZO was originally sold together with the PZO Biolar microscope. It was manufactured in the 1970s (and certainly before 1977), so these are optical glasses that are about half a century old! They have never been used until now (this is so-called NOS - New Old Stock), therefore these are excellent old-class optical glasses of the highest quality.
Filters with a 32 mm diameter are used - and can be used - in microscopes from various manufacturers:
- Carl Zeiss Jena
- Zeiss West Germany
- Eschenbach
- Meopta
- Nikon
- ROW
- Leitz Wetzlar
- Wild
- Hund
- Kosmos
- and many others
Important - popular microscopes by Lomo (for example Lomo Biolam) have a 33 mm filter holder, so the filters shown here have too small a diameter and may fall out from some Lomo holders.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO Biolar DIC microscope repair parts
- PZO microscope filter
- Carl Zeiss Jena Mikroskopfilter
- PZO Biolar Mikroskop Rundfilter
- microscope filter set matt blue yellow and green
- Mikroskopfilter matt grün blau und gelb
- PZO Filtersatz 32 mm matt grün blau gelb
- PZO 32 mm filter set for Carl Zeiss Jena Lumipan / Lg / Nf
- PZO Biolar DIC Filter 32 mm
- sada filtrů PZO 32 mm
- juego de filtros PZO 32 mm
- filtros para microscopio PZO Biolar
- set di filtri PZO 32 mm
- filtri per microscopio Carl Zeiss Jena Lumipan
- zestaw filtrów PZO 32 mm
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
6
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Filters
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolar DIC
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need good color filters
-
if you need a good diffuser
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99474
|
Leitz Wetzlar Periplan GW 10xM microscope measuring eyepiece 30 mm diam., micrometer
|
|
Description of this part for the microscope.
Measuring eyepiece for biological and measurement microscopes.
The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or
...
reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 30 mm.
Manufacturer: Leitz Wetzlar (Leica)
Model: Periplan GW 10x M
Magnification: 10x
Image: micrometer
Mounting diameter: 30 mm
The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Wetzlar measuring microscope eyepiece
- Leitz Mikroskop Messokular
- Leitz Periplan GW 10xM Messokular 30 mm
- Leitz Periplan GW 10x M measuring eyepiece micrometer 30 mm
- Leitz Orthoplan / Diaplan Messokular
- Wild M420 Messokular 30 mm
- měřicí okulár Leitz Periplan GW 10xM
- ocular micrométrico Leitz Periplan GW 10x
- ocular de medición microscopio Leitz Orthoplan
- oculare micrometrico Leitz Periplan GW 10x
- oculare di misura microscopio Leitz Orthoplan
- okular pomiarowy Leitz Periplan GW 10xM
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need to make measurements on your microscope, surface defects, spores, crystals and everything else
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99475
|
Leitz Wetzlar Periplan GW 10xMF microscope focusing photo eyepiece 30mm, frame graticule
|
|
Description of this part for the microscope.
Measuring eyepiece for biological and measurement microscopes.
The eyepiece features an original Leitz format reticle (photography graticule / photo mask) used
...
for precise framing and field-of-view limiting in photomicrography.
The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 30 mm.
Manufacturer: Leitz Wetzlar (Leica)
Model: Periplan GW 10x M F
Magnification: 10x
Image: photo frame graticule
Mounting diameter: 30 mm
The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Wetzlar microscope photo eyepiece
- Leitz Mikroskop Fotookular
- Leitz Periplan Mikrofotografie
- mikrofotografiaa Leitz Periplan
- microscope photo mask
- Formatokular für Mikroskop
- Bildfeldbegrenzung Mikroskop
- kadrowanie w mikroskopie
- microscope framing graticule
- Strichplatte mit Format-Begrenzung
- Leitz Wetzlar microscope focusing eyepiece
- okular z siatką formatową mikroskop
- Leitz Periplan GW 10xMF Fotookular 30 mm
- Leitz Periplan GW 10x MF focusing photo eyepiece frame graticule
- fotografický okulár Leitz Periplan GW 10xMF
- ocular fotográfico Leitz Periplan GW 10x MF
- ocular de enfoque microscopio Leitz Orthoplan
- oculare fotografico Leitz Periplan GW 10x MF
- oculare di messa a fuoco microscopio Leitz Orthoplan
- okular fotograficzny z siatką formatową Leitz Periplan GW 10xMF
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need to take precise photos with your microscope (photomicrography): this eyepiece allows you to perfectly focus the image and precisely define the frame and photo format (e.g., for APS-C, Full Frame, or film) before pressing the camera shutter.
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99473
|
Leitz Wetzlar Lichteinstellupe microscope auxiliary telescope / phase centering eyepiece
|
|
Description of this part for the microscope.
Centering telescope (auxiliary microscope) for aligning DIC prisms or phase contrast rings in the condenser.
Manufacturer: Leitz Wetzlar
Model:
...
Lichteinstellupe (Centering / Focus telescope)
Mounting diameter: 23.2 mm + original 30 mm adapter
This centering telescope can be used for:
- DIC alignment (Differential Interference Contrast)
- Phase contrast alignment (centering phase rings)
- Aperture diaphragm inspection (iris diaphragm observation)Filament centering when setting up Köhler illumination
This is one of those microscope elements for which many different names are used. Among others:
- phase telescope
- phase contrast telescope
- phase alignment telescope
- phase adjustment telescope
- phase centering telescope
- phase contrast centering telescope
- phase contrast alignment telescope
- phase contrast adjustment telescope
- centering telescope
- condenser centering telescope
- condenser alignment telescope
- condenser adjustment telescope
- alignment telescope
- adjustment telescope
- inspection telescope
- aperture viewing telescope
- back focal plane viewing telescope
- auxiliary microscope
- phase contrast auxiliary microscope
- alignment auxiliary microscope
- centering auxiliary microscope
- adjustment auxiliary microscope
- auxiliary telescope
- centering scope
- alignment scope
- phase scope
- phase viewer
- phase contrast viewer
- phase centering eyepiece
- phase contrast eyepiece
- phase alignment eyepiece
- phase telescope eyepiece
- centering eyepiece
- condenser centering eyepiece
- adjustment eyepiece
- inspection eyepiece
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Wetzlar Justierteleskop
- Leitz Orthoplan Hilfsmikroskop
- Leitz Mikroskop DIC Kondensor Okular
- Leitz Wetzlar Mikroskop Lichteinstellupe
- Leitz Lichteinstelllupe Hilfsmikroskop Phasenringe zentrieren
- Leitz Wetzlar auxiliary telescope phase centering eyepiece
- Leitz Dialux / Diaplan Einstellfernrohr
- Leica DMLS phase centering telescope
- pomocný mikroskop Leitz Wetzlar
- telescopio de centrado Leitz Wetzlar
- microscopio auxiliar para microscopio PZO Biolar
- cannocchiale di centratura Leitz Wetzlar
- microscopio ausiliario per microscopio PZO Biolar
- mikroskop pomocniczy Leitz Wetzlar do centrowania pierścieni fazowych
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
125 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
for centering DIC prisms
-
for centering phase contrast rings
-
for observing the iris diaphragm
-
for observing the filament when setting illumination according to the Köhler standard
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99483
|
Leitz Wetzlar 45/0,65 170/0,17 RMS microscope objective (45x Leica)
|
|
Description of this part for the microscope.
Leitz Wetzlar microscope objective.
Manufacturer: Leitz Wetzlar
Magnification: 45x
Color correction: achromat
Numerical aperture: 0.65
Tube length:
...
170 mm
Focal length: 37 mm
Cover glass: yes, 0.17 mm
Immersion: no
Thread: RMS
This objective was removed from a Leitz Dialux microscope, but it is compatible with most Leitz Wetzlar microscopes manufactured approximately before 1980 (SM, SM-Lux, Dialux, Ortholux, Orthoplan, etc.).
Some useful information about Leitz Wetzlar objectives with TL=170 mm and FL=37 mm:
- most Leitz microscopes manufactured approximately before 1980 support both 160 mm and 170 mm tube length objectives
- many Leitz microscopes support both 37 mm and 45 mm parfocal length objectives
- by adding an RMS-8mm adapter, such an objective obtains a parfocal length of 45 mm. Leitz manufactured such adapters under the name "Plezzy" - however, many users make their own versions from metal or by using 3D printers
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Dialux microscope repair parts
- Mikroskopobjektiv für Leitz SM und Leitz Dialux Mikroskope
- Leitz Wetzlar Ortholux / Orthoplan 45x Mikroskop Objektiv
- Leitz Wetzlar Leitz Objektiv mit 37 mm Abgleichlänge
- Leitz Objektiv mit 170 mm Tubuslänge
- Leitz objective for Dialux / Ortholux and Orthoplan microscope
- Leitz Wetzlar 45/0.65 170/0.17 Objektiv 37 mm
- Leitz SM / Dialux 45x objective replacement
- objektiv Leitz Wetzlar 45x
- objetivo Leitz Wetzlar 45x 170 mm
- objetivo para microscopio Leitz SM
- obiettivo Leitz Wetzlar 45x 170 mm
- obiettivo per microscopio Leitz SM
- obiektyw mikroskopowy Leitz Wetzlar 45x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Dialux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99500
|
Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906
|
|
Description of this part for the microscope.
Microscope objective manufactured by Zeiss West Germany.
Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 16x
Model: Plan 16/0.
...
35 160/0.17
Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906)
Color correction: Planachromat
Numerical aperture N.A.: 0.35
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan Mikroskopobjektiv
- Zeiss Standard GFL / WL microscope objective
- Zeiss Phomi / Universal Mikroskop Objektiv
- Zeiss West Germany planachromat microscope objective
- Zeiss Plan 16/0.35 160/0.17 Objektiv 460510-9906
- Zeiss Standard WL Plan 16x objective 45 mm
- objektiv Zeiss Plan 16x
- objetivo Zeiss Plan 16x
- objetivo 16x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 16x
- obiettivo 16x per microscopio Carl Zeiss Jena Ergaval
- obiektyw planachromatyczny Zeiss Plan 16x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
95 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99501
|
Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904
|
|
Description of this part for the microscope.
Microscope objective manufactured by Zeiss West Germany.
Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 40x
Model: Plan 40/0.
...
65 160/0.17
Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904)
Color correction: Planachromat
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan Mikroskopobjektiv
- Zeiss Standard GFL / WL microscope objective
- Zeiss Phomi / Universal Mikroskop Objektiv
- Zeiss West Germany planachromat microscope objective
- Zeiss Plan 40/0.65 160/0.17 Objektiv 460710-9904
- Zeiss Standard WL Plan 40x objective 45 mm
- objektiv Zeiss Plan 40x
- objetivo Zeiss Plan 40x
- objetivo 40x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 40x
- obiettivo 40x per microscopio Carl Zeiss Jena Ergaval
- obiektyw planachromatyczny Zeiss Plan 40x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
125 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
-
if you currently have an achromatic microscope objective and want to change it to a plan achromatic one to have a flat image in the full field of view
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99507
|
Leitz Dialux microscope flip-out condenser with iris diaphragm
|
|
Description of this part for the microscope.
Condenser with iris diaphragm and flip-out top lens for the vintage Leitz Wetzlar Dialux microscope.
Note - this condenser is installed by sliding it into the
...
guide rails of the condenser holder. It is not a condenser mounted in a circular clamp, therefore it does not have a "diameter" parameter describing it.
This condenser was removed from a Leitz Wetzlar Dialux microscope (the first black model), but to the best of my knowledge it also fits other microscopes from the same era: Leitz Ortholux and Leitz Orthoplan. Important - it does not fit Leitz SM microscopes.
The upper flip-out lens provides the best image quality when working with objectives of high numerical aperture (N.A.). When the upper lens is flipped out, optimal illumination is achieved when using objectives with magnifications below 10x.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Dialux microscope repair parts
- Leitz Wetzlar Dialux flip-out microscope condenser with iris diaphragm
- Leitz Dialux Klapplinse Mikroskop Kondensor mit Irisblende
- kondensor do starego czarnego mikroskopu Leitz Wetzlar Dialux
- Leitz Ortholux Mikroskopkondensor
- Leitz Orthoplan microscope condenser
- Leitz Wetzlar black enamel microscope condenser
- Leitz Dialux Kondensor Irisblende klemmt - Ersatz
- sklopný kondenzor Leitz Dialux
- condensador abatible Leitz Dialux
- condensador microscopio Leitz Orthoplan
- condensatore ribaltabile Leitz Dialux
- condensatore microscopio Leitz Orthoplan
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Condensers
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Dialux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a vintage Leitz Dialux microscope that is missing its condenser and you would like to complete it using original period parts
-
if you have a microscope with a condenser, but the condenser is of very poor quality or damaged (for example a damaged iris diaphragm or lens)
-
...
-
if you have another Leitz Wetzlar microscope compatible with this condenser (for example a Leitz Ortholux)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99536
|
Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x
|
|
Description of this part for the microscope.
Microscope objective manufactured by Leitz Wetzlar with 100x magnification, designed for brightfield and phase contrast work.
Manufacturer: Leitz
...
Wetzlar
Model: 160/0,17 EF 100/1.25 OEL PHACO 3
Magnification: 100x
Correction: semi-plan achromat
Numerical aperture: 1.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: yes, oil
Thread: RMS
Specimen protection: yes - spring-loaded
Info: PHACO 3 = phase contrast
Some important information about this objective:
- the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces
- the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat
- this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm
- the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3")
- this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm
This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters).
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Diaplan microscope repair parts
- Leitz Wetzlar Diaplan Phasenkontrast Mikroskopobjektiv
- Leitz Wetzlar 100x oil phase contrast microscope objective
- Leitz Wetzlar Phasenkontrast-Mikroskop
- Leitz Wetzlar 160 mm Phasenkontrast Kondensor
- Leitz EF 100/1.25 OEL Phaco 3 Objektiv
- Leitz Phaco 3 100x oil phase contrast objective 45 mm
- objektiv fázový kontrast Leitz Phaco 3 100x
- objetivo contraste de fases Leitz Phaco 3 100x
- objetivo 100x para microscopio PZO Biolar
- obiettivo contrasto di fase Leitz Phaco 3 100x
- obiettivo 100x per microscopio PZO Biolar
- obiektyw fazowy Leitz Phaco 3 100x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Diaplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99547
|
Leitz Dialux Wetzlar specimen holder for mechanical XY microscope stage
|
|
Description of this part for the microscope.
Spring-loaded specimen holder for the mechanical XY microscope stage used on various Leitz Wetzlar microscope models.
This particular specimen holder was removed
...
from a Leitz Dialux microscope. In the last photo in the gallery you can see the microscope stage from which it was removed. However, the manufacturer fitted the same type of mechanical XY microscope stage to many other Leitz microscope models, so this specimen holder is also compatible with models other than the Leitz Dialux.
When determining compatibility and whether this specimen holder can be mounted on a particular mechanical XY microscope stage, the following dimensions are critical:
- distance between the two side locating pins: 81 mm measured from the outer edge of one pin to the outer edge of the other pin
- locating pin diameter: 3 mm each
- therefore, the centre-to-centre distance between the locating pins is 78 mm
- diameter of the central mounting screw: 4 mm
- position of the mounting screw: centred between the two locating pins
If the spacing of the locating pins matches, this specimen holder can also be mounted on microscope stages made by other manufacturers.
Leitz Wetzlar produced specimen holders with fixed stage clips as well as versions with a spring-loaded stage clip. Here I am showing and offering the spring-loaded version.
On the used market and in technical documentation, this microscope part is described using a variety of names. Common terms include:
- specimen holder
- microscope stage specimen holder
- mechanical stage specimen holder
- slide holder
- microscope slide holder
- microscope slide clamp
- spring-loaded specimen holder
- spring-loaded slide holder
- spring-loaded stage clip
- specimen clamp
- specimen carrier
- mechanical stage carrier
- XY stage specimen holder
- specimen holder for mechanical XY microscope stage
- stage holder
- stage clip assembly
The photographs in the gallery show the exact dimensions of the microscope part offered here. In addition, the last photograph includes an arrow indicating exactly which microscope part is being described and where it is mounted on the mechanical XY microscope stage, making identification straightforward. The accompanying video demonstrates the operation of the spring-loaded stage clip.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Dialux microscope repair parts
- Leitz Wetzlar microscope stage specimen holder
- Leitz Wetzlar mikroskoptisch Objektführer
- Leitz Wetzlar XY Kreuztisch Kreuzmechanismus
- Leitz Wetzlar Mikroskop Kreuztisch Präparathalter
- Leitz Dialux Präparathalter Kreuztisch
- Leitz Dialux stage specimen holder
- držák preparátu Leitz Dialux
- pinza de preparados Leitz Dialux
- repuesto platina microscopio Leitz SM
- pinza portavetrini Leitz Dialux
- ricambio tavolino microscopio Leitz SM
- uchwyt preparatu Leitz Dialux
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Dialux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a stage that is missing the specimen holder
-
if you have a "simple" specimen holder and want to replace it with one with a spring-loaded clamp
-
...
-
if you want to install this holder on a stage in a microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99546
|
Leitz Dialux Wetzlar mechanical manipulator for XY microscope stage
|
|
Description of this part for the microscope.
Complete manipulator of the mechanical XY stage for Leitz Wetzlar microscopes.
This is a complete control assembly for the mechanical microscope stage,
...
allowing precise movement of the specimen in both the X and Y axes of the stage plane. The manipulator consists of two coaxial knobs, two independent drive shafts and the fixing elements that attach it to the stage mechanism.
This particular manipulator was removed from a Leitz Dialux microscope. The last photograph in the gallery shows the entire microscope stage from which it was dismounted. The manufacturer also used the same or very similar stages in many other Leitz Wetzlar microscope models, which is why the manipulator may also be compatible with other models from this company.
On the second-hand market and in service documentation one encounters many names referring to this assembly. The most commonly used terms include, among others:
- stage manipulator
- XY stage manipulator
- mechanical stage drive
- stage control knobs
- specimen mover
- coaxial stage drive
- stage drive assembly
- mechanical stage control
- manual XY stage drive
- stage actuator mechanism
Such manipulators very often suffer mechanical damage during transport of the microscope. Because they protrude beyond the outline of the stand, it is precisely they that absorb the impact energy first - in the event of a fall or improper packaging of the instrument.
In many cases it is not the entire manipulator that is damaged, but only one of its components. Most often these are the knobs, the drive shafts, the coaxial sleeves or the fixing elements. For this reason, this database also contains all the most important constituent parts of this (and other) manipulators, offered separately as service elements.
Damage to the manipulator does not make further work with the microscope impossible. The specimen can be moved by hand, or a simple specimen holder without an XY movement mechanism can be fitted. Such a solution works well at low magnifications; however, when working with objectives of magnifications greater than 40x (e.g. 60x, 63x, 80x or 100x), precise manual movement of the specimen becomes very difficult. At total magnifications exceeding about 400x, even a slight movement of the hand shifts the image by a considerable distance within the field of view. The mechanical manipulator enables very smooth, controlled and repeatable movement of the specimen in both axes, which is particularly important during observation with oil immersion and when producing photographic documentation.
The photographs in the gallery show the exact dimensions of the complete manipulator. The last photograph presents the entire microscope stage together with an arrow indicating the mounting location of this element, which makes it possible to identify the offered part unambiguously.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Dialux microscope repair parts
- Leitz Wetzlar microscope stage micromanipulator
- Leitz Wetzlar mikroskoptisch Bedienknopf
- Leitz Wetzlar XY Kreuztisch-Manipulator
- Leitz Dialux Kreuztisch Trieb
- Leitz Dialux XY stage manipulator
- posuv stolku Leitz Dialux
- manipulador de platina Leitz Dialux
- repuesto platina microscopio Leitz SM
- manipolatore tavolino Leitz Dialux
- ricambio tavolino microscopio Leitz SM
- manipulator stolika Leitz Dialux
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Dialux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have an incomplete Leitz microscope stage in which this manipulator is missing (e.g. someone did not finish the repair)
-
if you have a Leitz microscope stage in which the manipulator does not work or is of very poor quality (it turns stiffly or unevenly)
-
...
-
if you need a precise coaxial mechanism for your own DIY project, e.g. related to macro photography or rotating an object for 3D films
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99551
|
Leitz Wetzlar microscope objective plastic container RMS
|
|
Description of this part for the microscope.
Plastic microscope objective case made by Leitz Wetzlar.
Case parameters:
Material: plastic
Length: suitable for DIN-45 objectives or shorter
Diameter:
...
not intended for so-called "thick" objectives
Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective
This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type.
Various names are used on the secondary market for a microscope objective case, including:
- objective case
- microscope objective case
- objective container
- microscope objective container
- objective storage case
- objective storage container
- objective box
- objective storage box
- protective objective case
- objective lens case
- objective lens container
- dust protection case
- transport case for microscope objectives
- microscope objective holder case
- storage canister for microscope objectives
Each case has the Leitz Wetzlar logo on its cap.
Although this case is of greatest interest to users and collectors of objectives made by the manufacturer Leitz Wetzlar, it can of course be used to store objectives from any manufacturer.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Ortholux II microscope repair parts
- Leitz Wetzlar Mikroskop Objektivbox
- Leitz Wetzlar Mikroskop Objektiv Schutzbox
- Leitz Wetzlar microscope objective box
- Leitz Wetzlar microscope objective container case
- Leitz Wetzlar Objektivdose Kunststoff RMS
- Leitz Wetzlar RMS objective plastic canister
- pouzdro na objektiv Leitz Wetzlar
- estuche de objetivo Leitz Wetzlar
- estuche para objetivo RMS Leitz Wetzlar
- custodia per obiettivo Leitz Wetzlar
- contenitore obiettivo RMS Leitz Wetzlar
- pojemnik na obiektyw Leitz Wetzlar
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
3
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
10 €
|
Name of the category to which this microscope part is classified.
Accessories
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Ortholux II
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need an empty objective case to protect your objectives from dust or mechanical damage
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99563
|
Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm
|
|
Description of this part for the microscope.
PLAN achromatic polarizing microscope objective Lomo PLAN 25x0.50 P with iris diaphragm for Lomo Polam series polarizing microscopes.
Basic par
...
ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no - this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976
This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.
The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.
Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Polam L-213 microscope repair parts
- Lomo Polam POL-Mikroskop Objektiv
- Lomo Polam Mikroskopobjektiv mit Irisblende
- Lomo Polam Mikroskop 25x RMS Objektiv
- Lomo Polam microscope objective
- Lomo Polam polarizing microscope objective
- Lomo Polam PLAN 25x0.50 P Objektiv mit Irisblende 45 mm
- Lomo Polam L-213 plan 25x polarizing objective iris
- polarizační objektiv Lomo Polam 25x
- objetivo de polarización Lomo Polam 25x
- objetivo 25x para microscopio PZO Biolar
- obiettivo polarizzazione Lomo Polam 25x
- obiettivo 25x per microscopio PZO Biolar
- obiektyw polaryzacyjny Lomo Polam 25x z przysłoną
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Polam L-213
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any manufacturer and this is the objective you are missing
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91039
|
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography, S/N 039562
|
|
Description of this part for the microscope.
Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6.
...
3x
Model: Semiplan 6.3/0.16 160/-
Serial number: 039 562 (039562)
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This is one of the most commonly used microscope objectives for macro photography and focus stacking.
Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Semiplan Mikroskopobjektiv
- Carl Zeiss Jena Amplival microscope objective
- Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
- obiektyw mikroskopowy do fotografowania owadów
- Mikroskop-Semiplan Objektiv für Insekten-Makrofotografie
- Carl Zeiss Jena Semiplan 6.3/0.16 160/- RMS
- CZJ Semiplan 6.3x objective for macro photography with bellows
- Semiplan 6.3x Makroobjektiv am Balgengerät
- Semiplan 6.3x focus stacking insects
- Carl Zeiss Jena Laboval 6.3x Objektiv Ersatz
- Olympus BHA / CH-2 6.3x RMS objective 45 mm
- objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
- objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
- objetivo 6.3x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
- obiettivo 6.3x per microscopio PZO Biolar
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
169 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need a microscope objective for macro photography
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99823
|
Nikon TMS / Labophot-2 Microscope Ph3 40 DL 0.55 LWD 160/0-2 Objective | 40x Phase Contrast with Long Working Distance and Correction Collar
|
|
Description of this part for the microscope.
Achromatic Nikon Ph3 DL 40x / 0.55 LWD microscope objective for brightfield and phase contrast, with 0 - 2.0 mm correction collar, for 160 mm tube length -
...
for inverted and upright biological microscopes, made in Japan.
Basic objective parameters:
Manufacturer: Nikon, Japan
Model: Ph3 40 DL 0.55 LWD 160/0-2
Magnification: 40x
Numerical aperture (N.A.): 0.55
Optical correction: achromat
Phase contrast: Ph3 DL - Ph3 indicates the size of the phase ring (requires a matching Ph3 annulus in the condenser), DL (Dark Low) means dark, i.e. positive phase contrast - the object appears darker than the background
Working distance (WD): ~2.1 - 2.5 mm - LWD (Long Working Distance)
Correction collar: compensates for cover glass or vessel bottom thickness in the range 0 - 2.0 mm
Cover glass: the objective can be used without a cover glass, with a standard cover glass approx. 0.17 mm thick, and also with specimens observed through the bottom of a Petri dish up to 2.0 mm thick
Immersion: no (dry objective)
Tube length: 160 mm
Parfocal length: 45 mm
Thread: RMS
Optics: CF (Nikon CF-160) - requires no compensating eyepiece and allows photography by direct projection
This objective is suitable for:
- inverted microscopes - observation through the bottom of a Petri dish or cell culture flask
- upright biological microscopes - observation of specimens with or without a cover glass
Phase contrast work requires a compatible phase contrast condenser or a slider with a phase contrast annulus.
Commonly used, inexpensive cover glasses are 0.17 mm thick mainly in theory. Even the standard for class #1.5 allows a range of 0.16 - 0.19 mm, and in cheap Chinese cover glasses you will find in practice pieces from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. Variation in cover glass thickness clearly degrades image contrast and resolution (spherical aberration). The correction collar fitted to the objective offered here lets you adjust the optics to the combined thickness of the cover glass and the medium layer beneath it. This compensates for most of the variation found in practice.
In addition, the correction collar of this objective can be set to "0" for work without a cover glass, or to large values (up to 2.0 mm) to adapt the optics to observation through a microscope slide (0.8 - 1.2 mm), a glass Petri dish (usually 1.5 - 2.0 mm - thicker dishes are outside the collar range) or a plastic Petri dish (usually approx. 1 mm, in the range 0.8 - 1.2 mm).
This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and uses objectives for 160 mm tube length with a parfocal length of 33, 37 or 45 mm. Some example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Nikon TMS microscope repair parts
- Nikon TMS inverted microscope Ph3 40x LWD objective cell culture
- Nikon TMS inverses Mikroskop Phasenkontrast Objektiv 40x
- Nikon CF Ph3 DL 40x 0.55 LWD 160/0-2 objective Petri dish
- Nikon Ph3 DL 40x Objektiv Petrischale Korrekturring
- Nikon Labophot-2 phase contrast 40x objective correction collar
- Nikon Labophot-2 Phasenkontrast Objektiv 40x großer Arbeitsabstand
- objektiv fázový kontrast Nikon Ph3 DL 40x LWD
- objetivo contraste de fases Ph3 40x para microscopio PZO Biolar
- objetivo Nikon Ph3 40x LWD para microscopio LOMO Biolam
- obiettivo contrasto di fase 40x per microscopio PZO Biolar
- obiettivo Nikon Ph3 40x LWD per microscopio Carl Zeiss Jena Amplival
- Nikon buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
100 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Nikon
Nikon Instruments (Nikon Corp.)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
TMS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Nikon)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope is missing a 40x objective - for brightfield or phase contrast
-
if you observe cell cultures, algae, protozoa or fungi in Petri dishes on an inverted microscope
-
...
-
if a standard 40x objective cannot focus through the thick bottom of a Petri dish or culture flask, or touches the vessel
-
if you want to observe living, unstained specimens in phase contrast
-
if you need an objective with correction for cover glass or vessel bottom thickness
-
if you work with specimens without a cover glass
-
if you want to photograph specimens by direct projection
-
if you already have such an objective, but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99824
|
Steindorff Berlin Model C.Y.N. 10/0,30 microscope objective 10x | Leitz Wetzlar SM compatible
|
|
Description of this part for the microscope.
Achromatic 10x microscope objective by Steindorff Berlin.
Manufacturer: Steindorff Berlin
Model: 10/0.30
Magnification: 10x
Correction:
...
achromatic
Numerical aperture N.A.: 0.30
Tube length: 170 mm
Parfocal length: 37 mm
Cover glass: yes, 0.17 mm thick
Immersion: no (dry objective)
Thread: RMS
The Steindorff 10x objective is also suitable for macro photography, as it does not require a cover glass and allows direct projection onto the camera sensor without intermediate optics.
This is a so-called "short objective", with a parfocal length of 37 mm. It is particularly common to mount this objective on an 8 mm extension, which makes it possible to use the objective in microscopes requiring objectives with a parfocal length of 45 mm. Both professional adapters with protective optics and metal adapters, as well as popular DIY solutions made with a 3D printer, work well for this purpose.
Like a large proportion of microscope objectives manufactured in Germany in the 1960s and 1970s, this objective has a parfocal length of 37 mm and a tube length of 170 mm. This means that it is often used as a replacement objective for other German microscopes, such as:
- Leitz Wetzlar
- Kremp Wetzlar
- Hertel & Reuss
- Steinmar Berlin
- CBS Beck Kassel
- ROW Rathenow
This objective fits practically any microscope from any manufacturer, provided that it has an RMS thread and supports objectives designed for TL = 170 mm and with a parfocal length of 33 / 37 mm (or 45 mm when using a suitable adapter). Several examples of such microscopes are listed in the "compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Steindorff Berlin Model C.Y.N. microscope repair parts
- Steindorff Berlin 10x Mikroskop-Objektiv
- obiektyw mikroskopowy Steindorff Berlin
- Steindorff Berlin 10x microscope objective
- 10-fach Mikroskopobjektiv für ROW Rathenow Mikroskop
- Leitz Wetzlar 10x Mikroskopobjektiv Ersatz
- Meopta microscope objective
- 10x Mikroskopobjektiv für Hertel & Reuss Mikroskope
- Objektiv für Steindorff Berlin Mikroskop
- Steindorff Berlin buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
19 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Steindorff Berlin
Steindorff Berlin, West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Model C.Y.N.
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Steindorff Berlin)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Steindorff Berlin microscope and are missing exactly this type of objective to complete it
-
if you already have such an objective in your microscope but it is of very poor quality or is damaged
-
...
-
if you want to have such an objective as a spare
-
if you want to use this objective with another compatible microscope
-
if you want to use this objective for macro photography with a 10:1 reproduction ratio
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99831
|
Leitz Wetzlar 13/0.40 170/- RMS 13x microscope objective PN 519237
|
|
Description of this part for the microscope.
Leitz Wetzlar microscope objective with a unique 13x magnification.
Manufacturer: Leitz Wetzlar
Magnification: 13x
Color correction: achromat
Number in
...
the manufacturer's 1967 catalog: 519 237 (alternative notation: 519237)
Numerical aperture N.A.: 0.40
Tube length: 170 mm
Parfocal length: 37 mm
Working distance: 3.4 mm
Cover glass: either - the objective works both without and with a cover glass
Immersion: no (dry objective)
Thread: RMS
Because it works without a cover glass and has a high numerical aperture N.A., this objective can be attractive for macro photographers. It allows projection directly onto the camera sensor - without any intermediate optics.
This objective was removed from a Leitz SM microscope, but it fits most Leitz Wetzlar microscopes made before roughly 1980 (SM, SM-D, SM-Lux, Dialux, Ortholux, Orthoplan, etc.).
Some useful information about Leitz Wetzlar objectives with TL=170 mm and 37 mm parfocal length:
- most Leitz microscopes made before roughly 1980 accept objectives for both 160 mm and 170 mm tube length
- many Leitz microscopes accept objectives with both 37 mm and 45 mm parfocal length
- with an 8 mm RMS extension adapter, such an objective gets a parfocal length of 45 mm. Leitz made such adapters under the name "Plezy" - but many users make their own, from metal or on 3D printers
Like a large share of microscope objectives made in Germany in the 1960s and 1970s, this objective has a 37 mm parfocal length and a 170 mm tube length. For this reason it is often used as a replacement objective for other German microscopes, e.g.:
- Steindorff Berlin
- Kremp Wetzlar
- Hertel & Reuss
- Steinmar Berlin
- CBS Beck Kassel
- ROW Rathenow
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL=170 mm and a parfocal length of 33 / 37 mm (or 45 mm with a suitable adapter). Some examples of such microscopes are listed in the "compatibility" section, but this list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz SM microscope repair parts
- Leitz Wetzlar 13/0.40 170/- Objektiv 37 mm
- Leitz Wetzlar 13x objective 519237
- Leitz 13x Mikroskop Objektiv für SM und Dialux
- Leitz SM / SM-Lux 13x objective replacement
- Leitz Ortholux / Orthoplan 13x Objektiv Ersatz
- Leitz Achromat 13/0.40 Tubuslänge 170 mm
- Leitz 13x achromat for 170 mm tube length
- Leitz 13x objective for macro photography without cover glass
- Leitz 13x Objektiv für Makrofotografie direkt auf Kamerasensor
- Leitz 13x objective with 8 mm adapter for 45 mm parfocal
- Ersatzobjektiv 13x für Steindorff / Kremp Mikroskop
- objektiv k mikroskopu Leitz Wetzlar 13x
- objetivo Leitz Wetzlar 13x 170 mm
- objetivo 13x para microscopio Leitz SM
- obiettivo Leitz Wetzlar 13x 170 mm
- obiettivo 13x per microscopio Leitz Dialux
- obiektyw mikroskopowy Leitz Wetzlar 13x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
SM
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own a Leitz Wetzlar microscope and this is exactly the objective missing from your set
-
if you already have such an objective in your microscope, but it is in very poor condition or damaged
-
...
-
if you want to keep such an objective as a spare
-
if you want to use this objective on another, compatible microscope
-
if you want to use this objective for macro photography at a 13:1 reproduction ratio
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99845
|
Carl Zeiss Jena Gleitfett III E410 microscope grease
|
|
Description of this part for the microscope.
Original grease for servicing Carl Zeiss Jena microscopes, type Gleitfett III E410.
I have not managed to find any documentation describing how the individual
...
Gleitfett grades differ in their parameters.
Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.
This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.
This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Neophot 21 microscope repair parts
- Carl Zeiss Jena micromanipulator
- wymiana smaru Carl Zeiss Jena
- Carl Zeiss Jena Gleitfett III E410
- Carl Zeiss Jena microscope grease Gleitfett III E410 original
- Carl Zeiss Jena Mikroskop neufetten Originalfett
- Carl Zeiss Jena Amplival / Ergaval regrease focus mechanism
- Carl Zeiss Jena Lumipan / Nf Trieb neufetten
- Grobtrieb schwergängig - Carl Zeiss Jena Fett
- stiff focus - Carl Zeiss Jena grease
- mazivo Carl Zeiss Jena Gleitfett III E410
- grasa Carl Zeiss Jena Gleitfett III E410
- grasa para microscopio Carl Zeiss Jena Amplival
- grasso Carl Zeiss Jena Gleitfett III E410
- grasso per microscopio Carl Zeiss Jena Lumipan
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Extras
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Neophot 21
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
When you need to service your microscope or microscope component and need to replace the lubricants (grease).
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99848
|
Leitz Wetzlar Proj 4x microscope photo eyepiece 23.2mm | Ortholux / Orthoplan and Prado projection compatible
|
|
Description of this part for the microscope.
Leitz Wetzlar projection microscope eyepiece with 4x magnification
Manufacturer: Leitz Wetzlar (Germany)
Marking on the eyepiece: Proj. 4x
Magnification:
...
4x
Kind: projection eyepiece for photomicrography
Intended for: microscopes corrected for objectives with TL = 170 mm
Mounting diameter: 23.2 mm
Projection eyepieces are special microscope eyepieces used to project the microscopic image onto the sensor of a camera. Many microscope photo tubes and trinocular heads have a seat for a projection eyepiece.
Leitz projection eyepieces of this magnification carry several different markings. You will find "Proj.-Ok. H4x", "Proj.-Ok. P4X" and - as on the item offered here - simply "Proj. 4x". The letter H stands for the Huygens design. Leitz also made projection eyepieces of other magnifications, 2.5x among them, so the 4x version is not the only one in this family.
The eyepiece is intended for microscopes with a mechanical tube length of 170 mm. The older Leitz stands are corrected this way, Orthoplan, Ortholux, SM and SM-D among others. Later microscopes of this brand already work with a 160 mm tube. In Leitz optics of this generation part of the chromatic aberration correction is deliberately moved from the objective to the eyepiece, so matching an eyepiece to an objective is not merely a mechanical question here.
Despite its name, this eyepiece behaves differently from a typical projection eyepiece. It does not form a real image at a fixed distance, but projects the image to infinity - exactly like an ordinary viewing eyepiece. This makes it excellent for the afocal method, that is, photographing with a camera that keeps its own lens placed above the eyepiece. Leitz itself built its photographic adapters on precisely this method.
Leitz "Proj." eyepieces also found use outside microscopy. Eyepieces of this family were part of the microprojection attachments for the Leitz Prado and Pradovit projectors, which threw the image of a specimen onto a screen for a whole lecture room. If you are completing such an attachment, this is exactly the part.
Use in a microscope with a 160 mm tube length remains a matter of your own DIY modification. Mechanically the eyepiece fits any 23.2 mm seat, but the intermediate image is then formed in a different place, so focus and image scale will come out differently from what the manufacturer intended. There is, however, a route that gives a beautiful combination: into a microscope of another manufacturer you fit a Leitz Wetzlar objective computed for 170 mm, and this eyepiece above it. The optical path is then entirely Leitz - objective and eyepiece work as they were designed to, and only the stand remains foreign, a PZO or a Carl Zeiss Jena one for instance.
The "compatibility" section lists the microscope models this eyepiece can be used with, but that list is of course not complete. This projection eyepiece can be used with any microscope of any manufacturer, as long as it has a tube or another seat for an eyepiece of 23.2 mm diameter - subject to the difference between 160 and 170 mm tube length (I write about this above).
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Proj. 4x Projektionsokular 23.2 mm
- Leitz Ortholux projection eyepiece photomicrography
- Leitz Orthoplan Projektionsokular Fototubus
- Leitz SM-D Mikroskop Projektionsokular afokal
- Leitz Prado Mikroprojektion Projektionsokular
- Leitz Pradovit microscope attachment projection eyepiece
- Projektionsokular gesprungen Leitz Ortholux
- Projektionsokular verkratzt Leitz Orthoplan
- cracked projection eyepiece Leitz Ortholux
- fungus on projection eyepiece Leitz Orthoplan
- Leitz 170 mm tube length projection eyepiece DIY
- Meopta Projektionsokular 23.2 mm Mikrofotografie
- Hertel & Reuss projection eyepiece 23.2 mm
- Steindorff Berlin Projektionsokular Mikroskop
- ROW Rathenow projection eyepiece microscope photo
- okular projekcyjny mikroskopowy Leitz Ortholux
- projekční okulár Meopta a Leitz
- ocular de proyección Leitz Wetzlar microscopio
- ocular de proyección Meopta microscopio
- oculare di proiezione Leitz Ortholux
- oculare di proiezione Leitz Wetzlar microscopio
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Eyepieces
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope has a photo tube or a trinocular head with a 23.2 mm seat and you want to take photographs using a projection eyepiece
-
if you already have such an eyepiece, but it is damaged, scratched or has fungus on the lenses
-
...
-
if you want to keep a projection eyepiece as a spare
-
if you are completing a microprojection attachment for a Leitz Prado or Pradovit and the eyepiece is missing from it
-
if you have an older Leitz microscope for a 170 mm tube and want to photograph the way the manufacturer intended
-
if you need a compensating eyepiece for photomicrography, because your Leitz objectives leave part of the chromatic aberration correction to the eyepiece
-
if you want to use this eyepiece in a microscope of another manufacturer together with a Leitz Wetzlar objective computed for 170 mm
-
if you are trying out projection eyepieces of different magnifications to find the best one for your microscope and camera combination - and you want to test this one
-
if you have neither a photo tube nor a trinocular head, but want to use the eyepiece for photomicrography through the eyepiece tube
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99827
|
Zeiss Planapo 63x/1.4 Oel 160/- Microscope Objective PN 461840-9901
|
|
Description of this part for the microscope.
Plan-apochromatic Carl Zeiss oil immersion microscope objective with 63x magnification, for brightfield work on biological microscopes.
Basic parameters of the
...
objective:
Manufacturer: Zeiss West Germany
Engraving on the objective: Planapo 63/1,4 Oel 160/-
Manufacturer catalogue number: 46 18 40 - 9901 (also written as 461840-9901)
Magnification: 63x
Numerical aperture (N.A.): 1.4
Optical correction: plan-apochromatic
Immersion: yes, oil
Coverslip: according to the engraving on the barrel of this objective, it can be used both without a coverslip and with a standard coverslip of 0.17 mm thickness
Tube length: 160 mm
Parfocal distance: 45 mm
Thread: RMS
Specimen protection: yes, the objective has a spring-loaded mechanism preventing the slide with the specimen from being broken
Phase contrast: no - the objective has no phase rings inside
DIC: prisms allowing work in DIC mode are available on the market for this objective (sold separately)
This objective fits practically any microscope of any manufacturer, provided it has an RMS thread and accepts objectives for a 160 mm tube length with a parfocal distance of 33, 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Planapo 63x Oel objective diatoms resolution test
- Planapo 63x Ölimmersion Objektiv Zeiss Standard Mikroskop
- Planapo 63x Objektiv Frontlinse gesprungen
- obiektyw Zeiss Planapo 63x olejowy do okrzemek
- objektiv Planapo 63x olejová imerze Zeiss
- objetivo Zeiss Planapo 63x aceite PZO Biolar
- objetivo 63x aceite microscopio LOMO Biolam
- obiettivo Zeiss Planapo 63x olio PZO Biolar
- obiettivo 63x olio microscopio Carl Zeiss Jena Amplival
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
249 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a high numerical aperture N.A. objective for bright-field or DIC microscopy
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99853
|
Zeiss PN 467836 blue frosted microscope filter 32mm | Blauglas matt 46 78 36
|
|
Description of this part for the microscope.
Carl Zeiss blue matt microscope filter
Basic parameters of this microscope filter:
Manufacturer: Carl Zeiss West Germany
Name: Blauglas matt
Manufacturer
...
catalogue number: 46 78 36 (also written as 467836)
Colour: blue matt
Diameter: 32 mm
Material: glass
This is a filter that combines the functions of a blue filter and a ground glass diffuser:
- the blue filter is used to convert the yellow, warm light of the bulb into light closer to white light
- the matt filter (called a diffuser or ground glass) is used to even out the light across the whole area of the specimen and to remove the visible filament of the bulb
This does, however, have one consequence: without a visible filament it is not possible to work with illumination set up according to the Koehler method - and Zeiss mentions this in the leaflet supplied with the filter.
Very often only one or two microscope filters can be fitted in a microscope, for example one on the illuminator and the second in the holder below the condenser. The fact that the glass filter offered here is a 2-in-1 solution makes it possible to save the possible second slot for another filter.
The diameter of 32 mm is a standard with many manufacturers, which means this filter can be used with microscopes of numerous brands. The "compatibility" section lists over a dozen such microscopes, but it is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard Junior microscope repair parts
- Carl Zeiss Blauglas matt 32 mm Mikroskopfilter
- Zeiss 46 78 36 Mikroskop Filter
- Carl Zeiss blue matt microscope filter 32 mm
- Zeiss 467836 microscope filter replacement
- Mikroskop Glühlampenlicht zu gelb Blaufilter
- Mikroskopfilter gesprungen 32 mm Zeiss ersetzen
- microscope lamp filament visible diffuser filter
- microscope filter cracked replacement 32 mm Zeiss
- Mattscheibe Diffusor Mikroskop 32 mm Carl Zeiss
- blue daylight conversion filter microscope 32 mm
- modrý matný filtr do mikroskopu Carl Zeiss 32 mm
- filtro azul mate 32 mm para microscopio Carl Zeiss
- filtro difusor para microscopio 32 mm Carl Zeiss
- filtro blu opaco 32 mm per microscopio Carl Zeiss
- filtro diffusore per microscopio Carl Zeiss 32 mm
- niebieski matowy filtr mikroskopowy 32 mm Carl Zeiss
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
15 €
|
Name of the category to which this microscope part is classified.
Filters
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard Junior
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need exactly this Zeiss filter P/N 467836 because you know its characteristics
-
if you have a microscope with bulb illumination and want to shift the colour of the light closer to white
-
...
-
if you already use a blue filter and a matt filter and would like to have both in a single piece of glass
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99875
|
Leitz Orthoplan microscope 38mm photo tube for trinocular head and 30mm eyepiece | Dialux and Diaplan compatible
|
|
Description of this part for the microscope.
A photo tube that allows a projection eyepiece to be mounted on the trinocular head of Leitz Wetzlar microscopes.
Photo / trino heads for Leitz Wetzlar
...
microscopes have a standardized mount of 38 mm diameter into which various tubes can be fitted. One of exactly these tubes is presented here.
Basic parameters of the tube presented here:
Markings on the housing: "Germany" on one side and "30ø" on the other side
Mounting connection: a plain tube (cylinder). This is not a tube with a thread or a dovetail
Mounting diameter: 38 mm, that is the standard mounting diameter used in Leitz Wetzlar trinocular heads
Internal optics: none - this tube has no optics inside
Internal diameter: the tube has an internal diameter of 30 mm, so that a projection eyepiece of exactly that diameter can be fitted inside
The trinocular heads this tube fits are used among others in the following microscopes:
- Leitz Wetzlar Orthoplan
- Leitz Wetzlar Diaplan
- Leitz Wetzlar Ergolux
- Leitz Wetzlar Dialux
- Leitz Wetzlar Laborlux
- Leitz Wetzlar SM-LUX
- Leitz Wetzlar Ortholux II
- Leitz Wetzlar Aristoplan
- Leitz Wetzlar HM-LUX
This is not a tube for one particular microscope model. A trino head can be mounted not only on the microscope it was sold with, so the correct assumption is that this is a standard tube for Leitz Wetzlar trinocular heads - and those can be used on most microscope models of this company.
The last photo in the gallery shows what this tube looks like with a 30 mm eyepiece fitted.
The "compatibility" section lists example microscopes this tube fits, although the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Wetzlar 38mm Fototubus Trinokularkopf
- Leitz Orthoplan photo tube 38mm trinocular head
- Projektionsokular 30mm Halterung Leitz
- Leitz Dialux 20 photo tube adapter 30mm eyepiece
- Leitz Laborlux trinokularer Tubus Fotoaufsatz
- Leitz Diaplan phototube replacement
- Leitz Ortholux II Fototubus fehlt
- Leitz Aristoplan photo tube loose
- Leitz SM-LUX / HM-LUX Fototubus gesprungen
- Leitz Wetzlar Mikrofotografie Adapter DIY
- Leica Dialux 22 EB trinocular tube 38mm
- fototubus na mikroskop Leitz Wetzlar
- tubo fotografico microscopio Leitz Orthoplan
- adattatore oculare da proiezione 30mm Leitz
- tubo fotográfico microscopio Leitz Wetzlar
- adaptador para cámara microscopio Leitz Dialux
- tubus fotograficzny mikroskopowy Leitz Wetzlar 38mm
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Adapters
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a tube that allows a camera or photographic camera to be connected to a trinocular head
|
|
