Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

microscopeparts.eu/gallery/manual-284

Suitable for:
- Lomo OI-21 illuminator
- Lomo OI-35 illuminator
- Lomo OI-36 illuminator
- Lomo Biolam-M and Biolam-I microscopes
- MBC-9 and MBC-10 stereo microscope lamps
- and many others

Also fits older, black Lomo microscopes:
- MBB-1A
- MIN-8
- MBC-1 and MBC-2
- EPI reflected light illuminators, including the METAM

and many others that use the standard Lomo 8V 20W BA15d microscope bulb.

Description of this part for the microscope.

compensating eyepieces
Correction: infinity (oo)
Mounting diameter: 23.2 mm

Description of this part for the microscope.

eyepieces
Correction: infinity (oo)
Mounting diameter: 23.2 mm

Description of this part for the microscope.

condition and perfect optical condition. It's difficult to find a lens in this condition on the used market.

Manufacturer: Lomo
Magnification: 40x
Model: 40 0.65 P
Numerical Aperture: 0.65
Tube: 160 mm
Focal Length: 33 mm
Cover Glass: Yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This objective is designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a suitable insert, allowing it to be used with Lomo Polam, Lomo MIN-1 / Lomo MIN-6 / Lomo MIN-8 microscopes. Of course, the objective can be unscrewed and a different objective screwed into the insert.

The Pol adapter also allows you to center the objective lens along the entire optical path - but this requires tools.

Note: I've seen numerous reports claiming this RMS-Pol adapter is compatible with Leitz Wetzlar polarizing microscopes - but I haven't personally verified it.

Description of this part for the microscope.

also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

but I understand it also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

Description of this part for the microscope.

second-hand market.

Manufacturer: Lomo
Magnification: 95x
Model: MI 95x 1,25 190-P
Numerical Aperture: 1,25
Tube length: 190 mm
Focal length: (?)
Cover slip: yes, 0,17 mm (?)
Thread: RMS + Pol adapter
Marking: "P" = Polarization
Marking: "MI" = Oil immersion

This objective is for use with transmitted or reflected light with a cover slip (although I am not sure if it definitely requires a cover slip).

This specific item was used with the Lomo Polam P-312 microscope, i.e., with an EPI reflected light illuminator.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

It is not easy to find a used objective in this condition.

Manufacturer: Lomo
Magnification: 40x
Model: D=0 40 0.65
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 33 mm
Cover slip: no
Thread: RMS + adapter to M27 thread
Marking: "D=0" = work without cover slip

This is an objective for working with reflected light (but also transmitted light) without a cover slip.

Objective with RMS thread, but can be screwed into an adapter for M27 thread, allowing use in a microscope, e.g., Biolam-M. Of course, the objective can be unscrewed and another objective can be screwed into the adapter.

Info: M27 thread is also a standard used by Zeiss Axio microscopes. Therefore:
- this objective can be used in Axio microscopes with M27 thread
- this adapter can be used in Axio microscopes with another objective

This adapter is not a 3D-printed plastic part - it is a professional, metal, original product by Lomo.

Description of this part for the microscope.

This insert fits condensers used in the following Lomo microscopes:
- Polam (all models)
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 35 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

condensers used in the following Lomo microscopes:
- Polam
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 26 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

Note - this is the version without an iris diaphragm.

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

immersion operation and with a phase contrast ring.

Manufacturer: Lomo
Model: APO-WI-F 70x1,23
Magnification: 70x
Numerical aperture: 1,23
Correction: Apochromat
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes - water
Cover glass: yes - thickness from 0.10 to 0.20 mm
Markings: APO = Apochromat, WI = water immersion, F = phase contrast
Thread: RMS
Year of production: 1972

Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653).

This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional:
- water immersion is preferred by many users over oil immersion
- very high numerical aperture, allowing the objective to produce a high resolution image
- cover glass thickness correction ring

Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness.
Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye".

Although this objective is a so-called "short" objective, meaning with a parfocal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a parfocal length of 45 mm.

The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes.

Description of this part for the microscope.

length: (?)
Cover slip: no
Thread: RMS + Pol adapter

This objective is for use with transmitted or reflected light.

This specific item was used with the Lomo MOIN-6 microscope.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MPD-1 / Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This is an objective designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a phase contrast diaphragm (phase annulus). The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a phase contrast diaphragm (phase annulus). The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

special diaphragms was supplied. The set included phase contrast diaphragms and dark field diaphragms.

Note - I am showing and offering here one single diaphragm in holder - exactly the one visible in the photos. This is a special diaphragm with a small light aperture. The complete set for the Lomo Polam microscope contains 5 diaphragms.

Important note:
Such diaphragms in a special holder, supplied as a set of five diaphragms, were an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser in order to combine these observation techniques and obtain a phase image in polarized light. Please note that the same condensers can also be used in Lomo MIN series polarizing microscopes (for example Lomo MIN-6 or Lomo MIN-8 models) and in Lomo MIK series infrared microscopes (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase annuli in those microscopes as well.

The newest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already has a special polarizing phase contrast disc condenser (somewhat similar to the Lomo KF-4 condenser).

In the last photo in the gallery you can see a page from the Lomo Polam microscope manual where this element is shown. In the manual it is shown in figure number 6, element number 65.
The complete instruction manual for the Lomo Polam microscope is available here: https://www.facebook.com/groups/102512763506243/?multi_permalinks=1858054457952056

Description of this part for the microscope.

their standard configuration were supplied with three wooden boxes:
- the main microscope case
- a smaller accessory case (Case No. 1)
- a larger wooden carrying case for accessories (Case No. 2)
The box presented here is Case No. 2. This particular example originally comes from a Lomo Polam L-211 microscope, but it can also be used to store accessories from other Lomo Polam models.

Various names are used on the secondary market for this type of wooden microscope box, including:
- wooden accessory box
- microscope accessory case
- microscope accessory storage case
- microscope accessory carrying case
- protective case for microscope accessories
- wooden storage case for microscope parts
- transport case for microscope components
- wooden instrument case
- fitted wooden case for microscope accessories
- wooden carrying case for microscope attachments
- storage box for microscope eyepieces and objectives
- original microscope accessory case

A millimetre scale is visible in all photographs, but I intentionally do not provide the dimensions of this case in the description, even though this would normally be considered good practice. I simply believe that mainly (or perhaps only?) users of Lomo Polam polarizing microscopes will be interested in it, as they may wish to store original accessories in an original wooden case.

The last photograph shows the original Lomo label with the factory arrangement of the contents of this case. This will definitely help the user place the appropriate components in the correct compartments.

Description of this part for the microscope.

their standard configuration were supplied with three wooden boxes:
- the main microscope case
- a smaller accessory case (Case No. 1)
- a larger wooden carrying case for accessories (Case No. 2)
The box presented here is Case No. 1. This particular example originally comes from a Lomo Polam L-211 microscope, but it can also be used to store accessories from other Lomo Polam models.

Various names are used on the secondary market for this type of wooden microscope box, including:
- wooden accessory box
- microscope accessory case
- microscope accessory storage case
- microscope accessory carrying case
- protective case for microscope accessories
- wooden storage case for microscope parts
- transport case for microscope components
- wooden instrument case
- fitted wooden case for microscope accessories
- wooden carrying case for microscope attachments
- storage box for microscope eyepieces and objectives
- original microscope accessory case

A millimetre scale is visible in all photographs, but I intentionally do not provide the dimensions of this case in the description, even though this would normally be considered good practice. I simply believe that mainly (or perhaps only?) users of Lomo Polam polarizing microscopes will be interested in it, as they may wish to store original accessories in an original wooden case.

The last photograph shows the original Lomo label with the factory arrangement of the contents of this case. This will definitely help the user place the appropriate components in the correct compartments.

Description of this part for the microscope.

light from the lamp into homogeneous illumination, makes the lamp filament invisible and ensures that the entire specimen is illuminated evenly.

The filter is mounted on a swing-out holder, which is a separate module installed below the condenser. This allows the entire frosted diffuser to be swung out of the optical path. In this position, for example, illumination according to the Koehler standard can be adjusted.

Users employ various names for the matt filter mounted below the condenser. These include:
- matt filter
- frosted filter
- ground glass diffuser
- diffuser
- diffuser filter
- frost filter
- opal diffuser
- diffusing screen
- condenser diffuser
- swing-out diffuser

In the last photograph, an arrow indicates which microscope element is being offered and where it is located in the microscope, allowing this part to be identified unambiguously.

The holder with the frosted diffuser fits every model of the Lomo Polam microscope series (the model designation written in Cyrillic is given in parentheses):
- Lomo Polam S-111 (the Cyrillic designation looks like C-111)
- Lomo Polam S-112 (C-112)
- Lomo Polam R-111 (P-111)
- Lomo Polam R-112 (P-112)
- Lomo Polam R-113 (P-113)
- Lomo Polam L-211
- Lomo Polam L-213
- Lomo Polam LMPR
- also Lomo Polam R-312 and Lomo Polam R-311 (the Cyrillic designation is P-312 and P-311), although in these models the matt filter below the condenser is usually not required because these microscopes are intended primarily for reflected light work

The final photograph, in which I indicate with an arrow the mounting position of the diffuser below the condenser, is a poster containing a comparison table of various Lomo Polam microscope models. It will help you easily identify which model of Lomo Polam polarizing microscope you own.

Description of this part for the microscope.

213) do not have a built-in illuminator integrated into the microscope stand. Instead, they use external Lomo illuminators mounted on the microscope, for example the simple Lomo OI-32 illuminator or the Lomo OI-35 Koehler illuminator.

Users who require a more powerful light source for their work (for example 100 W) often use external illuminators mounted on separate stands - and this mirror is used to redirect that light into the optical system. Users also frequently experiment with different types of illumination (quartz, halogen, red or fluorescent light) - and this mirror is intended for such applications as well.

Mechanically, the mirror is integrated with a mounting base having a diameter of 43.5 mm, exactly matching the opening in the microscope base. When installed in this way, the mirror is stable and allows comfortable operation with high-power external light sources.

The last photograph in the gallery is a poster containing a comparison table of various Lomo Polam microscope models. It allows you to see exactly where and which illuminators are mounted in different Lomo Polam microscopes - and therefore also where this mirror is installed.

Description of this part for the microscope.

Carl Zeiss Jena, PZO, Meopta, Olympus, IOR and others.

This tube makes it possible to connect a camera or photographic camera to a trinocular head or directly to the microscope body, even when no trinocular head is installed.

Originally, this adapter was designed for the Lomo TRN-1 trinocular head. This head was used in Lomo Polam polarizing microscopes from the early 1970s onwards.

Several remarks regarding the model designation of the trinocular head for which this component was originally intended:
- the name Lomo TRN-1 is the Latin alphabet designation. In Cyrillic script the model designation appears as TPH (for example model TPH1Y4.2), and this designation is used in the manual for the Lomo Polam L-211 microscope
- the vast majority of these trinocular heads are not marked with any model designation
- the Envirotools website http://www.envirotools.hu/ateso_fenyu_polarizacios_mikroszkop.htm refers to this trinocular head as HU-POL

In the last photograph, an arrow indicates exactly which component is being offered and where it is located in the Lomo Polam microscope, allowing this part to be identified unambiguously.

Basic technical parameters of this tube:
Mounting method to the trinocular head or microscope: 41 mm dovetail mount (this is also the Carl Zeiss Jena standard)
Camera mounting method: male M39 thread
Alternative camera mounting method: since the M39 thread can be removed, a plain smooth tube with a diameter of 35 mm remains
Additional optics: yes, the original optics are installed inside, although they can be removed, leaving only an "empty tube".

This is not "a tube dedicated to a specific microscope model". It is a tube originally mounted on the third port (photo port) of a trinocular head. Since a trinocular head can be installed on microscopes other than the model with which it was originally supplied, this tube can be regarded as a universal accessory.

These technical parameters make it possible to use this tube with virtually any microscope manufactured by:
- Lomo (for example Biolam, Polam, MBB-1A and others)
- Carl Zeiss Jena (for example Ergaval, Amplival, Jenamed and others)
- IOR, Meopta and other manufacturers using a 41 / 41.5 mm dovetail mount

In addition, a 41 mm dovetail tube can easily be mounted on microscopes equipped with a 42 mm or 43 mm opening, for example:
- Olympus (for example CH, CH-2, BH-2 models)
- PZO (for example Biolar, Studar, MB-30 and others)

The entire list of microscope manufacturers and models given above may also be treated as a list of microscopes compatible with the Lomo TRN-1 trinocular head. Indeed, many examples can be found on the Internet showing this head being used with microscopes made by manufacturers other than Lomo.

Because this tube is equipped with an M39 thread by default, almost any camera or photographic camera can be attached by means of a suitable adapter, for example:
- devices with M42 threads
- devices with C-mount threads
- Nikon, Sony, Olympus and other camera standards

This is therefore a universal photo tube featuring a 41 mm dovetail on one side and either an M39 thread or a 35 mm tube on the other side.

In the image gallery, every photograph includes a millimetre scale, and in addition, the dimensions of the dovetail, tube and thread have been measured with calipers so that compatibility can be determined precisely.

Description of this part for the microscope.

below the condenser. In most microscopes this module is installed, but it is a separate accessory and does not have to be present. Directly below it is the location where the component offered here is mounted.

This component performs at least two functions:
- it limits the vertical movement of the condenser and specifically prevents it from being lowered too far
- it acts as a blanking plate if there are no additional accessories installed below the condenser diffuser

However, if this component serves as a blanking plate, what other accessories can be mounted there? The most commonly encountered optional accessory for Lomo Polam microscopes is the Lomo MIP-2 monochromator (this is the model designation written in the Latin alphabet). Since this is optional equipment, this blanking plate performs its function exactly at this location.

This blanking plate is also attractive to users who need an original mounting point below the condenser (appropriate dovetail mount and clamping screw - this blanking plate provides all of these features) in order to attach their own DIY accessory intended to be placed in the optical path.

In the last photograph, an arrow indicates which component is being offered and where it is located in the microscope, allowing this microscope part to be identified unambiguously.

Description of this part for the microscope.

with the Lomo Polam polarizing microscope. The set included phase contrast diaphragms and dark field diaphragms. Here I present and offer a complete set.

Important note:
Such diaphragms in a special holder were supplied as a set of five diaphragms as an accessory for the Lomo Polam polarizing microscope. These diaphragms are mounted onto the polarizing microscope condenser to obtain a combination of these techniques and a phase image in polarized light. Please note that the same condensers can also be used in polarizing microscopes of the Lomo MIN series (for example Lomo MIN-6 or Lomo MIN-8 models) and in microscopes designed for infrared light work from the Lomo MIK series (for example Lomo MIK-4). This means that there is nothing preventing the use of these phase rings in those microscopes as well.

The latest version of the Lomo Polam microscope, namely the Lomo Polam LMPR model, no longer requires this accessory. The Lomo Polam LMPR already features a dedicated rotating polarizing phase condenser (somewhat similar to the Lomo KF-4 condenser).

The last photo in the gallery shows a page from the Lomo Polam microscope manual where this microscope part is presented. In the manual it is shown in figure number 6, item number 65.

If you have such a set but it is incomplete - browse this database - you will also find individual diaphragms offered separately - specifically to solve such situations.

Description of this part for the microscope.

microscopes

Lomo microscope compensating slider:
Factory marking: СЛ1/4λ
Crystal material: Mica
Optical retardation: 1/4 lambda (approx. 140 nm)
Orientation of optical axes: diagonal, 45 degrees relative to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Quarter-wave compensating slider (quarter-wave plate) introducing a phase shift of 1/4 wavelength. Used for standard compensation, determination of the optical sign of minerals, and analysis of elliptically polarized light.

The axes of the fast ray (Np) and slow ray (Ng) are oriented at 45 degrees relative to the longitudinal axis of the slider. This is the standard configuration used in the vast majority of classic polarizing microscopes, where the accessory slot is parallel to the microscope arm and the vibration axes of the crystal must align precisely with the diagonal of the polarizer and analyzer directions.

A second variant of this slider is also available - of the Sénarmont type, designated by the abbreviation CP-QS (Compensating Plate, Quarter-wave Sénarmont). In the Sénarmont configuration, the crystal axis (Ng) runs parallel to the vibration direction of the polarizer, and the 45-degree effect is enforced by the microscope accessory slot - not by the orientation of the crystal within the body. The Sénarmont variant is intended for specialized LOMO microscope heads with a 45-degree-rotated accessory slot and for precise quantitative measurements of optical retardation in combination with a rotating analyzer and an interference filter (typically 546 nm or 551 nm). Before purchasing, please check the design of your microscope. Using the incorrect variant will cause the crystal axes to misalign with the vibration direction of the polarized light, preventing proper background extinction as well as precise measurements and conoscopic observations.

Description of this part for the microscope.

erpendicular/parallel axis - for Lomo Polam polarizing microscopes

Lomo microscope compensating slider:
Factory marking: СЛ1/4λ (Latin alphabet transcription: SL1/4lambda)
Alternative name: Sénarmont, CP-QS (Compensating Plate, Quarter-wave Sénarmont)
Crystal material: Mica
Optical retardation: 1/4 lambda (approx. 140 nm)
Orientation of optical axes: perpendicular and parallel to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Quarter-wave compensating slider of the Sénarmont type (Sénarmont quarter-wave plate) introducing a phase shift of 1/4 wavelength. Unlike the standard quarter-wave plate, in the Sénarmont configuration the crystal axis (Ng) runs parallel to the vibration direction of the polarizer, and the 45-degree effect is enforced by the microscope accessory slot - not by the orientation of the crystal within the body. Used for precise quantitative measurements of optical retardation, determination of the optical sign of minerals, and analysis of elliptically polarized light - in combination with a rotating analyzer and an interference filter (typically 546 nm or 551 nm).

The axes of the fast ray (Np) and slow ray (Ng) are oriented parallel and perpendicular to the edges of the slider body. This arrangement is used in specific types of LOMO microscope heads or with a non-standard (rotated by 45 degrees) polarizer setup, in order to achieve the correct interference effect.

A first variant of this slider is also available - standard quarter-wave plate СЛ1/4λ (Latin alphabet transcription: SL1/4lambda) with diagonal axis (45 degrees), suitable for the vast majority of classic polarizing microscopes with a standard accessory slot. Before purchasing, please check the design of your microscope. Using the incorrect variant will cause the crystal axes to misalign with the vibration direction of the polarized light, preventing proper background extinction as well as precise measurements and conoscopic observations.

Description of this part for the microscope.

КВ.КР.1 (Latin alphabet transcription: KV.KR.1)
Crystal material: Quartz
Optical retardation: 1 lambda (approx. 550 nm)
Orientation of optical axes: perpendicular and parallel to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Full-wave compensating slider (gypsum plate / first-order red plate) introducing a phase shift of one full wavelength. It produces the sensitive interference tint - the purplish-red of the first order - against which even minimal changes in the birefringence of the observed specimen become clearly visible as a shift toward blue or yellow tones. Used for identification of low-birefringence minerals and for determining the sign of elongation of crystals.

Description of this part for the microscope.

marking: none (variable retardation)
Crystal material: Quartz
Optical retardation: continuously variable, from 1st to 4th order of the interference spectrum
Orientation of optical axes: aligned with the insertion direction (retardation increases with insertion depth)

Dimensions:
Total length: 115 mm
Insertion length: 78 mm
Width: 19 mm

Compensating slider in the form of a quartz wedge with variable, increasing optical retardation. Allows precise, continuous adjustment of the compensation value by sliding the wedge within the microscope accessory slot. Used for accurate determination of the interference color order of observed specimens and for precise measurement of crystal birefringence.

Description of this part for the microscope.

illuminator mount
- the arm containing the coarse focus (macro movement) and coaxial fine focus (micro movement) mechanism
- a pincer holder (single objective holder) for a polarizing microscope objective
- the microscope head mount - however, in Lomo Polam microscopes this position is first occupied by the intermediate tube with the polarization analyzer, and only then by the microscope head

The complete Lomo Polam R-113 / P-113 microscope body may be useful in the following situations:
- if you are building your own microscope by purchasing individual parts to assemble a configuration that fully meets your requirements
- if you own a Lomo Polam microscope but its body is heavily worn, damaged or incomplete, for example with defective coarse/fine focus controls, a damaged pincer objective holder or other mechanical problems

Lomo Polam microscopes are built around a standardized modular design. For example:
- components such as the stage holder, condenser holder, polarizing intermediate tube, monocular head or trinocular photo head from other Polam models (e.g. L-211 or L-213) are compatible with the R-113 / P-113 body
- the R-113 body can also be installed on other, including newer, Lomo Polam models, making it an inexpensive way to repair a microscope with a defective coarse/fine focus mechanism

Description of this part for the microscope.

for the large illuminator attached to the rear of the microscope
- a built-in right-angle mirror in the base that redirects the light beam. This mirror can be centered using two adjustment screws located on the front of the microscope base
- the focusing block with coarse focus (macro movement) and coaxial fine focus (micro movement)
- a mount for either the single objective holder (pincer holder) or the 5-position polarizing objective nosepiece
- the microscope head mounting point - however, in Lomo Polam microscopes a polarizing intermediate tube with the analyzer is mounted here first, followed by the microscope head

The complete body of the Lomo Polam L-211 microscope may be useful in the following situations:
- if you are building your own microscope by purchasing individual components to assemble a configuration that perfectly matches your requirements
- if you own a Lomo Polam microscope whose body is in very poor condition, damaged or incomplete, for example with non-functioning focusing controls, a damaged illuminator mount or other mechanical problems

Since this database includes both the body of the Lomo Polam R-113 (Полам Р-113) and the Lomo Polam L-211 (Полам Л-211), here is a brief summary of the differences between them:
- the Lomo Polam R-113 has no built-in illumination components in the base, only an opening for a mirror or an external light source
- the Lomo Polam L-211 has a built-in right-angle mirror in the base that redirects light from the rear illuminator vertically upward, and it also provides a mounting point for the large rear illuminator
- the Lomo Polam R-113 has a permanently installed single objective holder (pincer holder) for a polarizing objective
- the Lomo Polam L-211, on the other hand, has an interchangeable mount that accepts either a single objective holder (pincer holder) or a 5-position polarizing objective nosepiece

Lomo Polam microscopes feature a standardized modular design, which means, for example:
- components such as the microscope stage holder, condenser holder, polarizing intermediate tube, monocular head or trinocular photo head from other Polam microscope models (e.g. R-113, R-211 or L-213) are compatible with this L-211 body
- this L-211 body can also be installed on other Lomo Polam models, including older ones, making it an inexpensive way to upgrade an older Polam microscope, for example one with a damaged coarse/fine focusing block
- another interesting option is replacing only the base in order to equip simpler Lomo Polam microscopes with the powerful rear-mounted illuminator

An amusing curiosity. Users of Lomo Polam microscopes, especially those unfamiliar with the Cyrillic alphabet, sometimes misread the model designation of the Lomo Polam L-211.
- the original Cyrillic designation is: Л-211
- many users mistake the letter "Л" (L) for the letter "П" (P) because they have a very similar appearance in Cyrillic
- as a result, they incorrectly read the model designation as Lomo Polam P-211
- the funny part is that there actually is a microscope model called "ЛОМО Полам Р-211" - however, the Cyrillic letter "Р" corresponds to the Latin letter "R", which makes the confusion even greater

Description of this part for the microscope.

ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no - this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976

This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.

The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.

Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.

Description of this part for the microscope.

objective:
Manufacturer: LOMO, Russia (ЛОМО)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "89"
Year of manufacture: 1989
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "80"
Year of manufacture: 1980
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "79"
Year of manufacture: 1979
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "75"
Year of manufacture: 1975
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.

LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.

This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "93"
Year of manufacture: 1993
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "85"
Year of manufacture: 1985
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "74"
Year of manufacture: 1974
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "72"
Year of manufacture: 1972
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "86"
Year of manufacture: 1986
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.

Description of this part for the microscope.

Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "66"
Year of manufacture: 1966
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS

The LOMO 8x objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.

Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.

A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more

Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.

This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.

Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.

LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.

This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.