Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Description of this part for the microscope.

diaphragm blades individually.

Description of this part for the microscope.

Description of this part for the microscope.

Description of this part for the microscope.

Description of this part for the microscope.

Manufacturer: PZO Warszwa (Poland)
Model: PZO OK 12 STP
Engraving: 12xMP
Magnification: 12x
Mounting Diameter: 34 mm
Info: This is a single eyepiece. Inside is a PZO 10/100 micrometer scale.

This eyepiece also fits other stereoscopic microscopes with a 34 mm eyepiece diameter.

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

PhA (negative, anoptral, yellow band*), PhS (positive, gray band), and A (amplitude phase contrast, brown band).
- Position: Can be screwed into any position on the PZO KFL condenser

The PZO KFL condenser is a universal microscope condenser with interchangeable discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

Description of this part for the microscope.

discs. It can be fitted with both phase contrast and darkfield discs (which can be mixed). Each disc is focused to perfectly match the microscope objective. PZO KFL = "Fluorescence Contrast" is an accessory to the PZO fluorescence kit and was originally sold with the PZO Biolar FL and PZO MB30 FL microscopes, among others. It can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

Description of this part for the microscope.

boxes for:
- phase contrast
- double eyepiece
- KPI2 + MPI2 set
- dark field
- and many others

Description of this part for the microscope.

Stereo objective
- 1x magnification
- For the PZO MST-110 and MST-127 stereo microscopes
- Black, smooth surface

The PZO MST-110 stereo microscope was manufactured in black with a rough surface. The PZO MST-127 stereo microscope was manufactured in black with a smooth surface and in white, also with a smooth surface. All objectives between these models and variants are compatible.

Description of this part for the microscope.

Stereo objective
- 2x magnification
- For the PZO MST-110 and MST-127 stereo microscopes
- Black, smooth surface

The PZO MST-110 stereo microscope was manufactured in black with a rough surface. The PZO MST-127 stereo microscope was manufactured in black with a smooth surface and in white, also with a smooth surface. All objectives between these models and variants are compatible.

Description of this part for the microscope.

Stereo objective
- 2x magnification
- For the PZO MST-110 and MST-127 stereo microscopes
- Grey (gray / ivory / white), smooth surface

The PZO MST-110 stereo microscope was manufactured in black with a rough surface. The PZO MST-127 stereo microscope was manufactured in black with a smooth surface and in graye / grey / ivory / white, also with a smooth surface. All objectives between these models and variants are compatible.

Description of this part for the microscope.

Stereo objective
- 3x magnification
- For the PZO MST-110 and MST-127 stereo microscopes
- Black, smooth surface

The PZO MST-110 stereo microscope was manufactured in black with a rough surface. The PZO MST-127 stereo microscope was manufactured in black with a smooth surface and in white, also with a smooth surface. All objectives between these models and variants are compatible.

Description of this part for the microscope.

Stereo objective
- 5x magnification
- For the PZO MST-110 and MST-127 stereo microscopes
- Black, smooth surface

The PZO MST-110 stereo microscope was manufactured in black with a rough surface. The PZO MST-127 stereo microscope was manufactured in black with a smooth surface and in white, also with a smooth surface. All objectives between these models and variants are compatible.

Description of this part for the microscope.

apertures. This allows the use of a darkfield condenser with an aperture diaphragm.

Description of this part for the microscope.

10x, 40x, and 100x

This phase contrast condenser can be used with microscopes from virtually any manufacturer as long as they have a 39.5 mm condenser mounting diameter (PZO, Zeiss, Will Wetzlar, and dozens of others).
This high-quality phase contrast condenser was manufactured in Japan before the company was acquired by the Chinese company Motic.

Description of this part for the microscope.

diameter: 23.2 mm

Due to their very high quality, they are often used with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted.

8x eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 8x eyepieces provide the best image and optimal magnification.

Description of this part for the microscope.

and other fluorescence microscopes from this company.

Description of this part for the microscope.

a disc with the appropriate aperture on the condenser - and this is just such a disc.

Description of this part for the microscope.

PhA (negative, anoptral, yellow stripe*), PhS (positive, gray stripe), and A (amplitude phase contrast, brown stripe).
Condenser: Compatible with PZO K3Ph, K3Ph1, KS and K4Ph condensers. Not compatible with PZO K3Phz, KFF, and KFL condensers.
It also fits the PZO KS condenser (from the PZO MB30S microscope) after installing the appropriate polarizers.

The PZO phase contrast kit can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

PhA (negative, anoptral, yellow stripe*), PhS (positive, gray stripe), and A (amplitude phase contrast, brown stripe).
Condenser: Compatible with PZO K3Ph, K3Ph1, KS and K4Ph condensers. Not compatible with PZO K3Phz, KFF, and KFL condensers.
It also fits the PZO KS condenser (from the PZO MB30S microscope) after installing the appropriate polarizers.

The PZO phase contrast kit can be used with any microscope from any manufacturer that accepts a 39.5 mm condenser, although the top lens can be replaced with a 37 mm lens.

*Note: The yellow stripe on PZO PhA phase contrast objectives sometimes turns orange over time.

Description of this part for the microscope.

eyepiece
- 52 mm > 39 mm thread adapter for Olympus Camedia
- Olympus Camedia Zoom C-5000 5.0 Mpx camera

This kit allows you to take micrographs on PZO microscopes. It can be mounted either
- instead of a head on biological microscopes
- on the PZO MNT-6 trino head
- one the PZO DIC MPI2 / MPI3 / MPI5
- or on the PZO NF-SB3 L1 adapter with a T6 connector for PZO MST-130 / 131 / 132 stereo microscopes.

Description of this part for the microscope.

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Description of this part for the microscope.

Gleitfett grades differ in their parameters.

Gleitfett I E10 and Gleitfett II E75 were supplied with the Carl Zeiss Jena micromanipulator.
The Gleitfett III E410 offered here was supplied with the Carl Zeiss Jena Neophot-21 microscope.

This MAY suggest (although I have no proof in the form of manufacturer documentation) that the lower numbers (I and II) and the lower values of the "E" parameter (E10 and E75) were intended for finer mechanisms - and may therefore have a lower viscosity, for example. The III E410 grease, with its high "E" value, was supplied with a heavy microscope built around massive mechanics - so it may well be thicker.

This grease can of course be used on microscopes from other manufacturers as well - a few are listed in the "compatibility" section, but that is by no means a complete list.

Description of this part for the microscope.

37 mm)
- four phase contrast objectives
- MIR-4 auxiliary microscope (23,2 mm eyepiece)
- wooden case

Four phase contrast objectives:
- Lomo 10x 0.30 F
- Lomo 20x 0.40 F
- Lomo 40x 0.65 F
- Lomo MI 90x 1.25 F
- thread: RMS
- tube length: 160 mm
- focal length: 33 mm

Can be used with, among others: With Lomo microscopes:
- Biolam (Bresser Biolam)
- Biolam I
- MBB 1A
- MBR
- MBI
- MBI-11
- and others

This set is often used with Carl Zeiss Jena microscopes. To use it with microscopes from dozens of other brands, a condenser adapter is used, changing the condenser mounting diameter to 39.5 mm, and adapters changing the focal length of the objectives to 45 mm. It can then be used with PZO, Olympus, Nikon, Hund Wetzlar, Will Wetzlar, and most other microscopes with a TL of 160 mm.

Description of this part for the microscope.

halogen bulb can be used
LED: YES - LED bulb can be used
Note: There is an ON/OFF switch on the cable

Here is some interesting information about light bulbs: https://baertierchen.de/wb_nov19.html

Description of this part for the microscope.

Description of this part for the microscope.

boxes, which appear to be from before 1975.
Later boxes, such as those for PZO Studar or PZO Biolar microscopes, had round keys rather than flat sheet metal ones.

Description of this part for the microscope.

dovetail connection in many PZO microscopes and microscope accessories:

- PZO Biolar, MB-30 microscopes, some versions of Studar, ML-5, ML-6, and others
- PZO OE-1 and OE-4 EPI illuminators
- MPI-5 and MPI-3 DIC head
- PZO KS stereo contrast attachment
- magnification changer attachment
- photographic tubes for the PZO MNT6 trino head
- PZO MST-130/131 stereo microscope attachments (adapter for T6)

Users often install this PZO head mount on microscopes from other companies to use the PZO DIC.

Description of this part for the microscope.

Coaxial fine movement mechanism (micro adjustment) with knob
- Block mounting screws to the arm

If you need individual components from this block (e.g. one gear or just knobs) - contact us

Description of this part for the microscope.

consists of:
- an illuminator (light source)
- a "tube" containing collimating lenses and a field diaphragm
- a 90-degree angle mirror
- a light filter (clear or blue)

This offers an integrated block, also known as a "tube." It consists of:
- a metal tube with holes that acts as a heat sink, dissipating heat from the light source
- a set of lenses that collimate the illumination beam
- a field diaphragm (iris diaphragm)
- a knob that opens/closes the diaphragm

This element is the same for all lighting types, regardless of whether it's a 6V 15W bulb, a PZO OH1 (12V 100W) or a modified LED, so it fits any version of the PZO Biolar microscope:
- B
- B2
- GF
- Pol
- DIC
- EPI
- Fluoreszenz

It contains two critical components: a collimating lens that often cracks under temperature, and a field diaphragm whose blades are prone to bending.

If you need smaller - individual components from this block - contact us

Description of this part for the microscope.

without the collimating lenses.

This component is the same for all versions of the PZO Biolar microscope:
- B
- B2
- GF
- Pol
- DIC
- EPI
- Fluoreszenz

If you need smaller, individual diaphragm components (e.g., separate blades) - contact us

Description of this part for the microscope.

microscope:
- B
- Pol
- DIC
- EPI
- Fluoreszenz

Note: it likely will not fit the B2 and GF versions.

This is an original "old-time" element, coming from the dismantling of a PZO Biolar microscope, of very good quality.

Both the right and left side lining are identical.

Description of this part for the microscope.

33 mm
Thread: RMS
Variant: glossy housing

This very old series of objectives was used in vintage MinO, M-100, and early versions of the MET-3 microscopes.

Together with the 12mm RMS extension adapter, this lens can be successfully used on newer PZO microscopes such as the MB-30, Studar, and Biolar.

Important: this lens can, of course, be used on microscopes from other manufacturers, as it has a classic RMS connection.

Description of this part for the microscope.

mechanical lock
- A rack for vertical movement of the condenser holder
- A knob with a gear (pinion) for vertical movement of the condenser
- A mechanical lock to prevent excessive condenser lifting
- A central screw for securing the condenser
- Two long screws for centering the condenser

The condenser supported by the PZO Biolar microscope has a diameter of 39.5 mm.

This component is the same for all versions of the PZO Biolar microscope:
- B
- B2
- GF
- Pol
- DIC
- EPI
- Fluoreszenz

If you need smaller - individual components of this module (e.g. toothed rack, knob, screws - anything) - contact us

Description of this part for the microscope.

mounting screw
- two long screws for centering the condenser

This part is compatible with the following PZO microscopes:
- MB 30
- MB 30S
- MS 5
- ML 4
- ML 5
- ML 6

Note - This part is BLACK. Please note that the microscopes it is compatible with may have different paint colors.

Note - This part is from the PZO MB-30 microscope, so it has long screws for centering the condenser. It differs from the condenser holders of the MS and ML models in these screws; i.e., the MS and ML do not have such long screws for centering the condenser. Users of PZO MS and PZO ML series microscopes often replace their condenser holder with the one in the MB-30 to easily center the condenser, which is especially convenient when using the condenser for phase contrast.

Note - the gear rack on which this mechanism moves is NOT included in the kit.

If you need smaller, individual components of this module (e.g., a gear knob, centering screws, or anything else) - contact us

Description of this part for the microscope.

mechanism. This block only includes a coarse (macro) feed mechanism.
More specifically, if such a block were complete, it would also include a fine (micro) feed module. This module is simply not included in the unit offered here. Therefore, it is an attractive component for those looking to repair a coarse (macro) feed.

- Black focusing block
- Coarse (macro) feed gear system
- Coarse (macro) feed knobs
- Coaxial fine (micro) feed knobs
- Tension adjustment mechanism

The tension adjustment mechanism is a very important component of a microscope. The PZO MB-30 and ML series microscopes move the entire column (the entire arm) up and down, and this resistance adjustment mechanism prevents the arm from lowering itself if additional components are installed, such as a DIC head or a camera on a trinocular head (as they constitute additional weight).

If you need a precise (micro) movement mechanism, which is missing here, if you need a complete focusing block, or if you need individual components from this block (e.g., a single gear or just the knobs), please contact us

Description of this part for the microscope.

PZO logo and a circular illumination filter - the one offered here is colorless.

Some newer versions of the PZO Biolar microscope included a blue illumination filter mounted in the microscope base. This filter cut out the yellow color of the light emitted by the bulb, providing the user with a pleasant, near-white light.

Unfortunately, this filter is not replaceable, and when the light source is changed to a halogen or cold LED, the blue light filter becomes annoying, as the light color changes from white to blue.

If the user tries to remove the original light filter themselves, they often break either the filter or its black housing. This brings us to the point where it's worth having this part on hand - you can easily swap the blue filter for a colorless one.

NOTE - this part is originally heat-attached and held in place by melted plastic legs. After replacement, it's best to glue it in place.

This item fits the following versions of the Biolar PZO microscope:
- B
- Pol
- DIC
- EPI
- Fluoreszenz

Note - it likely will not fit the B2 or GF versions.

Description of this part for the microscope.

Biolar microscope is commonly (incorrectly) called AK11.

The component shown here is used; it's obvious that such an old mirror isn't "like new" - but it is in very good condition.

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: glossy | mirror-finish

Description of this part for the microscope.

Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

polarization kit
Intended for: monocular biological microscopes
Type: for working with transmitted light

This allows you to view objects in polarized transmitted light, which produces very beautiful effects, for example, when observing descaling agent, vitamin C, or sand.

The kit includes:
- a polarizer that attaches to the light source
- an analyzer that attaches to the eyepiece

NOTE: Make sure the eyepiece diameter is suitable for mounting the analyzer.

Description of this part for the microscope.

transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: PZO
Model: K15x
Magnification: 15x
Image: micrometer and X-crosshair
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide. The entire unit is housed in an original wooden box.

The kit includes a slide with a standard micrometer scale to calibrate this eyepiece at any magnification.

Identical K15x eyepieces were also made by other manufacturers, such as Lomo and Carl Zeiss Jena.

Description of this part for the microscope.

45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = negative (anoptral) phase contrast (yellow bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

mm
Cover Glass: no
Immersion: no
Thread: RMS
Info: Ph = Zernike phase contrast (green bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

Info: Ph (Zernike) objectives produce an exceptionally nice image with a bluish background when used with KS phase contrast condensers from the PZO MB-30S microscope.

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

This is an oil-immersion objective with a high numerical aperture. It is recommended for working with fluorescent light or for those whose primary magnification is around 40x, 45x, 50x, 55x, 60x, or 63x and who want to achieve the highest possible quality and detail visibility.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (-)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

0,24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (0)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

(not BA15d)
Filament type: flat, horizontal

For example, fits:
- PZO MB-30 microscope
- PZO OE1 EPI illuminator
- PZO LMK Koehler microscope lamp

NOTE - IMPORTANT - This bulb does not fit the PZO Biolar microscope.

Description of this part for the microscope.

type: flat, horizontal

Suitable for many microscopes from various manufacturers. For example, it fits:
- PZO Biolar microscope
- EPI PZO OE4 illuminator

NOTE - IMPORTANT - This bulb does not fit the PZO MB-30 microscope.

Description of this part for the microscope.

30S microscope base consists of:
- an illuminator (light source)
- a "tube" containing a collimating lens and a field diaphragm
- a screw securing the tube
- an angle mirror that reflects light at 90 degrees

Two components of this tube are offered here:
- a metal tube with a lens collimating the illumination beam
- a metal tube with a field diaphragm (iris diaphragm)

There are two critical components here: the collimating lens, which often cracks under temperature, and the field diaphragm, whose blades are prone to bending.

Description of this part for the microscope.

manufactured by PZO and removed from the PZO MB-30 microscope.

Compatible with the following microscopes:
- PZO MB-30 / MB-30S
- PZO ML4 / ML5 / ML6

I need to check if it fits the PZO MS series microscopes.

Description of this part for the microscope.

This part is often damaged in PZO SK8 microscope stages: because the knobs extend beyond the microscope's outline after installation, the worm shaft often bends during transport, making it difficult to straighten properly.

The PZO SK8 is a mechanical microscope stage with horizontal knobs, primarily used in PZO MB30 microscopes, ML series models, and PZO MST-130/131 stereo microscopes - but is also sometimes installed in Studar and Biolar models.

Description of this part for the microscope.

eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

Description of this part for the microscope.

eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

Description of this part for the microscope.

reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Meopta
Model: H8x M10
Magnification: 8x
Image: micrometer
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

Description of this part for the microscope.

2 mm

6x (and 8x) eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 6x/8x eyepieces provide the best image and optimal magnification.

Description of this part for the microscope.

Description of this part for the microscope.

Description of this part for the microscope.

eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

Description of this part for the microscope.

23.2 mm

Compensating 5x eyepieces are very often used as projection eyepieces for microscope photography.

Description of this part for the microscope.

the arm is hollow inside. This hollow space is covered by a black sheet metal cover - and this is exactly this part.

This part fits the following PZO Biolar microscope versions:
- B
- B2
- Pol
- DIC
- EPI
- Fluoreszenz

Note - most likely it does not fit the GF version.

It is an original "from the era" part, coming from a disassembled PZO Biolar microscope.

Description of this part for the microscope.

maintenance (especially cleaning) of this element is required. Since PZO Biolar microscopes are 40-50 years old, it is now possible to find units without this cover, as it was lost over the years.

This metal cover also acts as a heat sink and dissipates heat from the bulb - this can sometimes be seen as discoloration on the inner surface of the metal. For this reason, replacing it with an element made of cardboard or plastic is a very bad practice.

Without this cover, contaminants can enter the optical light beam, the angled mirror, or the field diaphragm, which may, for example, cause diaphragm failure or deterioration of image quality.

This element fits the following versions of the PZO Biolar microscope:
- B
- B2
- Pol
- DIC
- EPI
- Fluoreszenz

Note - most likely it does not fit the GF version.

This is an original element, taken from the disassembly of a PZO Biolar microscope.

Description of this part for the microscope.

Monocular microscope head for a fluorescence microscope
Model: PZO MNJ-4
Mounting method: dovetail, diameter 43 mm
Supported eyepieces: 23.2 mm
Mounted filter: OG1 / GG9
For microscopes: PZO Biolar FL and PZO MB-30 FL

Why are monocular microscope heads often used in fluorescence microscopy? Fluorescence microscopy (especially older designs) produces a relatively dark image, so it is beneficial for 100% of the light beam to reach a single eye. A binocular microscope head would split the light 50% to each eye, which could result in an image that is too dark.

The barrier fluorescence filter PZO OG1 / GG9 mounted under the microscope head protects the eyes from the harmful spectrum of fluorescence illumination.

Note - there is also a PZO GG9 fluorescence filter (also available in my catalog). It is important to select the correct filters for the appropriate applications.

The OG1 / GG9 filter is a separate element that can be detached from the microscope head. It is mounted under the microscope head in a dedicated slot provided for this purpose.

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: matte

Description of this part for the microscope.

defect in one eye and proper adjustment of image sharpness.

In PZO MST-130 and MST-131 stereo microscopes the tubes are universal - there is no difference between right and left.

Basic parameters:
- Type: tube with diopter correction ring
- Eyepiece diameter: 34 mm
- Side: universal; right and left
- Color: black
- Version: short tube

Notice: PZO MST microscopes occur in the following colors:
- glossy black
- glossy ivory
- matte rough white
- other variants in export versions
This tube is BLACK.

Notice: Binocular heads of PZO MST 130 / 131 stereo microscopes are available in versions with long eyepiece tubes as well as short ones. Here I present and offer the SHORT version.