Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

compensating eyepieces
Correction: infinity (oo)
Mounting diameter: 23.2 mm

Description of this part for the microscope.

eyepieces
Correction: infinity (oo)
Mounting diameter: 23.2 mm

Description of this part for the microscope.

condition and perfect optical condition. It's difficult to find a lens in this condition on the used market.

Manufacturer: Lomo
Magnification: 40x
Model: 40 0.65 P
Numerical Aperture: 0.65
Tube: 160 mm
Focal Length: 33 mm
Cover Glass: Yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This objective is designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a suitable insert, allowing it to be used with Lomo Polam, Lomo MIN-1 / Lomo MIN-6 / Lomo MIN-8 microscopes. Of course, the objective can be unscrewed and a different objective screwed into the insert.

The Pol adapter also allows you to center the objective lens along the entire optical path - but this requires tools.

Note: I've seen numerous reports claiming this RMS-Pol adapter is compatible with Leitz Wetzlar polarizing microscopes - but I haven't personally verified it.

Description of this part for the microscope.

also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

but I understand it also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

Description of this part for the microscope.

them out, instead of unscrewing each objective individually.

More information: here .

Lomo Polam comparision table.

Lomo Polam Manual .

Description of this part for the microscope.

second-hand market.

Manufacturer: Lomo
Magnification: 95x
Model: MI 95x 1,25 190-P
Numerical Aperture: 1,25
Tube length: 190 mm
Focal length: (?)
Cover slip: yes, 0,17 mm (?)
Thread: RMS + Pol adapter
Marking: "P" = Polarization
Marking: "MI" = Oil immersion

This objective is for use with transmitted or reflected light with a cover slip (although I am not sure if it definitely requires a cover slip).

This specific item was used with the Lomo Polam P-312 microscope, i.e., with an EPI reflected light illuminator.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

It is not easy to find a used objective in this condition.

Manufacturer: Lomo
Magnification: 40x
Model: D=0 40 0.65
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 33 mm
Cover slip: no
Thread: RMS + adapter to M27 thread
Marking: "D=0" = work without cover slip

This is an objective for working with reflected light (but also transmitted light) without a cover slip.

Objective with RMS thread, but can be screwed into an adapter for M27 thread, allowing use in a microscope, e.g., Biolam-M. Of course, the objective can be unscrewed and another objective can be screwed into the adapter.

Info: M27 thread is also a standard used by Zeiss Axio microscopes. Therefore:
- this objective can be used in Axio microscopes with M27 thread
- this adapter can be used in Axio microscopes with another objective

This adapter is not a 3D-printed plastic part - it is a professional, metal, original product by Lomo.

Description of this part for the microscope.

This insert fits condensers used in the following Lomo microscopes:
- Polam (all models)
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 35 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

condensers used in the following Lomo microscopes:
- Polam
- MIN-8
- MIK-1
- MIK-4

and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.

Mount diameter: 26 mm

The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)

Note - this is the version without an iris diaphragm.

In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.

Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.

IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.

Description of this part for the microscope.

length: (?)
Cover slip: no
Thread: RMS + Pol adapter

This objective is for use with transmitted or reflected light.

This specific item was used with the Lomo MOIN-6 microscope.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MPD-1 / Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

Description of this part for the microscope.

08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).

Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).

VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.

Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.

It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This is an objective designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective

Description of this part for the microscope.

35 160/0.17
Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906)
Color correction: Planachromat
Numerical aperture N.A.: 0.35
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Description of this part for the microscope.

65 160/0.17
Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904)
Color correction: Planachromat
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS

Description of this part for the microscope.

their standard configuration were supplied with three wooden boxes:
- the main microscope case
- a smaller accessory case (Case No. 1)
- a larger wooden carrying case for accessories (Case No. 2)
The box presented here is Case No. 2. This particular example originally comes from a Lomo Polam L-211 microscope, but it can also be used to store accessories from other Lomo Polam models.

Various names are used on the secondary market for this type of wooden microscope box, including:
- wooden accessory box
- microscope accessory case
- microscope accessory storage case
- microscope accessory carrying case
- protective case for microscope accessories
- wooden storage case for microscope parts
- transport case for microscope components
- wooden instrument case
- fitted wooden case for microscope accessories
- wooden carrying case for microscope attachments
- storage box for microscope eyepieces and objectives
- original microscope accessory case

A millimetre scale is visible in all photographs, but I intentionally do not provide the dimensions of this case in the description, even though this would normally be considered good practice. I simply believe that mainly (or perhaps only?) users of Lomo Polam polarizing microscopes will be interested in it, as they may wish to store original accessories in an original wooden case.

The last photograph shows the original Lomo label with the factory arrangement of the contents of this case. This will definitely help the user place the appropriate components in the correct compartments.

Description of this part for the microscope.

their standard configuration were supplied with three wooden boxes:
- the main microscope case
- a smaller accessory case (Case No. 1)
- a larger wooden carrying case for accessories (Case No. 2)
The box presented here is Case No. 1. This particular example originally comes from a Lomo Polam L-211 microscope, but it can also be used to store accessories from other Lomo Polam models.

Various names are used on the secondary market for this type of wooden microscope box, including:
- wooden accessory box
- microscope accessory case
- microscope accessory storage case
- microscope accessory carrying case
- protective case for microscope accessories
- wooden storage case for microscope parts
- transport case for microscope components
- wooden instrument case
- fitted wooden case for microscope accessories
- wooden carrying case for microscope attachments
- storage box for microscope eyepieces and objectives
- original microscope accessory case

A millimetre scale is visible in all photographs, but I intentionally do not provide the dimensions of this case in the description, even though this would normally be considered good practice. I simply believe that mainly (or perhaps only?) users of Lomo Polam polarizing microscopes will be interested in it, as they may wish to store original accessories in an original wooden case.

The last photograph shows the original Lomo label with the factory arrangement of the contents of this case. This will definitely help the user place the appropriate components in the correct compartments.

Description of this part for the microscope.

light from the lamp into homogeneous illumination, makes the lamp filament invisible and ensures that the entire specimen is illuminated evenly.

The filter is mounted on a swing-out holder, which is a separate module installed below the condenser. This allows the entire frosted diffuser to be swung out of the optical path. In this position, for example, illumination according to the Koehler standard can be adjusted.

Users employ various names for the matt filter mounted below the condenser. These include:
- matt filter
- frosted filter
- ground glass diffuser
- diffuser
- diffuser filter
- frost filter
- opal diffuser
- diffusing screen
- condenser diffuser
- swing-out diffuser

In the last photograph, an arrow indicates which microscope element is being offered and where it is located in the microscope, allowing this part to be identified unambiguously.

The holder with the frosted diffuser fits every model of the Lomo Polam microscope series (the model designation written in Cyrillic is given in parentheses):
- Lomo Polam S-111 (the Cyrillic designation looks like C-111)
- Lomo Polam S-112 (C-112)
- Lomo Polam R-111 (P-111)
- Lomo Polam R-112 (P-112)
- Lomo Polam R-113 (P-113)
- Lomo Polam L-211
- Lomo Polam L-213
- Lomo Polam LMPR
- also Lomo Polam R-312 and Lomo Polam R-311 (the Cyrillic designation is P-312 and P-311), although in these models the matt filter below the condenser is usually not required because these microscopes are intended primarily for reflected light work

The final photograph, in which I indicate with an arrow the mounting position of the diffuser below the condenser, is a poster containing a comparison table of various Lomo Polam microscope models. It will help you easily identify which model of Lomo Polam polarizing microscope you own.

Description of this part for the microscope.

213) do not have a built-in illuminator integrated into the microscope stand. Instead, they use external Lomo illuminators mounted on the microscope, for example the simple Lomo OI-32 illuminator or the Lomo OI-35 Koehler illuminator.

Users who require a more powerful light source for their work (for example 100 W) often use external illuminators mounted on separate stands - and this mirror is used to redirect that light into the optical system. Users also frequently experiment with different types of illumination (quartz, halogen, red or fluorescent light) - and this mirror is intended for such applications as well.

Mechanically, the mirror is integrated with a mounting base having a diameter of 43.5 mm, exactly matching the opening in the microscope base. When installed in this way, the mirror is stable and allows comfortable operation with high-power external light sources.

The last photograph in the gallery is a poster containing a comparison table of various Lomo Polam microscope models. It allows you to see exactly where and which illuminators are mounted in different Lomo Polam microscopes - and therefore also where this mirror is installed.

Description of this part for the microscope.

Carl Zeiss Jena, PZO, Meopta, Olympus, IOR and others.

This tube makes it possible to connect a camera or photographic camera to a trinocular head or directly to the microscope body, even when no trinocular head is installed.

Originally, this adapter was designed for the Lomo TRN-1 trinocular head. This head was used in Lomo Polam polarizing microscopes from the early 1970s onwards.

Several remarks regarding the model designation of the trinocular head for which this component was originally intended:
- the name Lomo TRN-1 is the Latin alphabet designation. In Cyrillic script the model designation appears as TPH (for example model TPH1Y4.2), and this designation is used in the manual for the Lomo Polam L-211 microscope
- the vast majority of these trinocular heads are not marked with any model designation
- the Envirotools website http://www.envirotools.hu/ateso_fenyu_polarizacios_mikroszkop.htm refers to this trinocular head as HU-POL

In the last photograph, an arrow indicates exactly which component is being offered and where it is located in the Lomo Polam microscope, allowing this part to be identified unambiguously.

Basic technical parameters of this tube:
Mounting method to the trinocular head or microscope: 41 mm dovetail mount (this is also the Carl Zeiss Jena standard)
Camera mounting method: male M39 thread
Alternative camera mounting method: since the M39 thread can be removed, a plain smooth tube with a diameter of 35 mm remains
Additional optics: yes, the original optics are installed inside, although they can be removed, leaving only an "empty tube".

This is not "a tube dedicated to a specific microscope model". It is a tube originally mounted on the third port (photo port) of a trinocular head. Since a trinocular head can be installed on microscopes other than the model with which it was originally supplied, this tube can be regarded as a universal accessory.

These technical parameters make it possible to use this tube with virtually any microscope manufactured by:
- Lomo (for example Biolam, Polam, MBB-1A and others)
- Carl Zeiss Jena (for example Ergaval, Amplival, Jenamed and others)
- IOR, Meopta and other manufacturers using a 41 / 41.5 mm dovetail mount

In addition, a 41 mm dovetail tube can easily be mounted on microscopes equipped with a 42 mm or 43 mm opening, for example:
- Olympus (for example CH, CH-2, BH-2 models)
- PZO (for example Biolar, Studar, MB-30 and others)

The entire list of microscope manufacturers and models given above may also be treated as a list of microscopes compatible with the Lomo TRN-1 trinocular head. Indeed, many examples can be found on the Internet showing this head being used with microscopes made by manufacturers other than Lomo.

Because this tube is equipped with an M39 thread by default, almost any camera or photographic camera can be attached by means of a suitable adapter, for example:
- devices with M42 threads
- devices with C-mount threads
- Nikon, Sony, Olympus and other camera standards

This is therefore a universal photo tube featuring a 41 mm dovetail on one side and either an M39 thread or a 35 mm tube on the other side.

In the image gallery, every photograph includes a millimetre scale, and in addition, the dimensions of the dovetail, tube and thread have been measured with calipers so that compatibility can be determined precisely.

Description of this part for the microscope.

below the condenser. In most microscopes this module is installed, but it is a separate accessory and does not have to be present. Directly below it is the location where the component offered here is mounted.

This component performs at least two functions:
- it limits the vertical movement of the condenser and specifically prevents it from being lowered too far
- it acts as a blanking plate if there are no additional accessories installed below the condenser diffuser

However, if this component serves as a blanking plate, what other accessories can be mounted there? The most commonly encountered optional accessory for Lomo Polam microscopes is the Lomo MIP-2 monochromator (this is the model designation written in the Latin alphabet). Since this is optional equipment, this blanking plate performs its function exactly at this location.

This blanking plate is also attractive to users who need an original mounting point below the condenser (appropriate dovetail mount and clamping screw - this blanking plate provides all of these features) in order to attach their own DIY accessory intended to be placed in the optical path.

In the last photograph, an arrow indicates which component is being offered and where it is located in the microscope, allowing this microscope part to be identified unambiguously.

Description of this part for the microscope.

Wetzlar
Model: 160/0,17 EF 100/1.25 OEL PHACO 3
Magnification: 100x
Correction: semi-plan achromat
Numerical aperture: 1.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: yes, oil
Thread: RMS
Specimen protection: yes - spring-loaded
Info: PHACO 3 = phase contrast

Some important information about this objective:
- the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces
- the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat
- this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm
- the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3")
- this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm

This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters).

Description of this part for the microscope.

microscopes

Lomo microscope compensating slider:
Factory marking: СЛ1/4λ
Crystal material: Mica
Optical retardation: 1/4 lambda (approx. 140 nm)
Orientation of optical axes: diagonal, 45 degrees relative to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Quarter-wave compensating slider (quarter-wave plate) introducing a phase shift of 1/4 wavelength. Used for standard compensation, determination of the optical sign of minerals, and analysis of elliptically polarized light.

The axes of the fast ray (Np) and slow ray (Ng) are oriented at 45 degrees relative to the longitudinal axis of the slider. This is the standard configuration used in the vast majority of classic polarizing microscopes, where the accessory slot is parallel to the microscope arm and the vibration axes of the crystal must align precisely with the diagonal of the polarizer and analyzer directions.

A second variant of this slider is also available - of the Sénarmont type, designated by the abbreviation CP-QS (Compensating Plate, Quarter-wave Sénarmont). In the Sénarmont configuration, the crystal axis (Ng) runs parallel to the vibration direction of the polarizer, and the 45-degree effect is enforced by the microscope accessory slot - not by the orientation of the crystal within the body. The Sénarmont variant is intended for specialized LOMO microscope heads with a 45-degree-rotated accessory slot and for precise quantitative measurements of optical retardation in combination with a rotating analyzer and an interference filter (typically 546 nm or 551 nm). Before purchasing, please check the design of your microscope. Using the incorrect variant will cause the crystal axes to misalign with the vibration direction of the polarized light, preventing proper background extinction as well as precise measurements and conoscopic observations.

Description of this part for the microscope.

erpendicular/parallel axis - for Lomo Polam polarizing microscopes

Lomo microscope compensating slider:
Factory marking: СЛ1/4λ (Latin alphabet transcription: SL1/4lambda)
Alternative name: Sénarmont, CP-QS (Compensating Plate, Quarter-wave Sénarmont)
Crystal material: Mica
Optical retardation: 1/4 lambda (approx. 140 nm)
Orientation of optical axes: perpendicular and parallel to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Quarter-wave compensating slider of the Sénarmont type (Sénarmont quarter-wave plate) introducing a phase shift of 1/4 wavelength. Unlike the standard quarter-wave plate, in the Sénarmont configuration the crystal axis (Ng) runs parallel to the vibration direction of the polarizer, and the 45-degree effect is enforced by the microscope accessory slot - not by the orientation of the crystal within the body. Used for precise quantitative measurements of optical retardation, determination of the optical sign of minerals, and analysis of elliptically polarized light - in combination with a rotating analyzer and an interference filter (typically 546 nm or 551 nm).

The axes of the fast ray (Np) and slow ray (Ng) are oriented parallel and perpendicular to the edges of the slider body. This arrangement is used in specific types of LOMO microscope heads or with a non-standard (rotated by 45 degrees) polarizer setup, in order to achieve the correct interference effect.

A first variant of this slider is also available - standard quarter-wave plate СЛ1/4λ (Latin alphabet transcription: SL1/4lambda) with diagonal axis (45 degrees), suitable for the vast majority of classic polarizing microscopes with a standard accessory slot. Before purchasing, please check the design of your microscope. Using the incorrect variant will cause the crystal axes to misalign with the vibration direction of the polarized light, preventing proper background extinction as well as precise measurements and conoscopic observations.

Description of this part for the microscope.

КВ.КР.1 (Latin alphabet transcription: KV.KR.1)
Crystal material: Quartz
Optical retardation: 1 lambda (approx. 550 nm)
Orientation of optical axes: perpendicular and parallel to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Full-wave compensating slider (gypsum plate / first-order red plate) introducing a phase shift of one full wavelength. It produces the sensitive interference tint - the purplish-red of the first order - against which even minimal changes in the birefringence of the observed specimen become clearly visible as a shift toward blue or yellow tones. Used for identification of low-birefringence minerals and for determining the sign of elongation of crystals.

Description of this part for the microscope.

marking: none (variable retardation)
Crystal material: Quartz
Optical retardation: continuously variable, from 1st to 4th order of the interference spectrum
Orientation of optical axes: aligned with the insertion direction (retardation increases with insertion depth)

Dimensions:
Total length: 115 mm
Insertion length: 78 mm
Width: 19 mm

Compensating slider in the form of a quartz wedge with variable, increasing optical retardation. Allows precise, continuous adjustment of the compensation value by sliding the wedge within the microscope accessory slot. Used for accurate determination of the interference color order of observed specimens and for precise measurement of crystal birefringence.

Description of this part for the microscope.

nosepiece.

This holder is compatible with the following polarizing microscopes:
- Lomo Polam L-211
- Lomo Polam L-213
- Lomo Polam LMPR

The microscope models listed above are equipped with a removable 5-position objective nosepiece that can be removed and replaced with this single objective holder. A single-objective configuration has long been a standard solution in polarizing microscopy, and many users still prefer it today.

Simpler models, such as the Lomo Polam C-111 (Latin transcription S-111) and P-111 (Latin transcription R-111), do not have a removable objective nosepiece. Therefore, this holder is not compatible with those models.

Important:
The objective is not screwed directly into this holder. This holder does not have an RMS thread. It accepts objectives that have already been mounted in dedicated centering adapters. These adapters provide the precise objective centering required for polarizing microscopy.

The manufacturer illustrates this holder in Figure 4 of the instruction manual (item 47) and refers to it as щипцовое устройство (shchipcovoe ustrojstvo - pincer device).

Several names are commonly used for this component in documentation and among microscope users, including:
- single objective holder
- single objective mount
- objective holder
- objective clamp
- objective carrier
- pincer holder
- single objective nosepiece
- objective socket
- the English term "single objective microscope nosepiece" is very commonly used, even though it is technically associated with a revolving nosepiece

If you need additional comparison photographs, this database also contains:
- the 5-position objective nosepiece for this microscope model (part number 00798)
- the centering adapter for a single RMS objective (supplied together with the objective as part number 00772)

Description of this part for the microscope.

illuminator mount
- the arm containing the coarse focus (macro movement) and coaxial fine focus (micro movement) mechanism
- a pincer holder (single objective holder) for a polarizing microscope objective
- the microscope head mount – however, in Lomo Polam microscopes this position is first occupied by the intermediate tube with the polarization analyzer, and only then by the microscope head

The complete Lomo Polam R-113 / P-113 microscope body may be useful in the following situations:
- if you are building your own microscope by purchasing individual parts to assemble a configuration that fully meets your requirements
- if you own a Lomo Polam microscope but its body is heavily worn, damaged or incomplete, for example with defective coarse/fine focus controls, a damaged pincer objective holder or other mechanical problems

Lomo Polam microscopes are built around a standardized modular design. For example:
- components such as the stage holder, condenser holder, polarizing intermediate tube, monocular head or trinocular photo head from other Polam models (e.g. L-211 or L-213) are compatible with the R-113 / P-113 body
- the R-113 body can also be installed on other, including newer, Lomo Polam models, making it an inexpensive way to repair a microscope with a defective coarse/fine focus mechanism

Description of this part for the microscope.

for the large illuminator attached to the rear of the microscope
- a built-in right-angle mirror in the base that redirects the light beam. This mirror can be centered using two adjustment screws located on the front of the microscope base
- the focusing block with coarse focus (macro movement) and coaxial fine focus (micro movement)
- a mount for either the single objective holder (pincer holder) or the 5-position polarizing objective nosepiece
- the microscope head mounting point – however, in Lomo Polam microscopes a polarizing intermediate tube with the analyzer is mounted here first, followed by the microscope head

The complete body of the Lomo Polam L-211 microscope may be useful in the following situations:
- if you are building your own microscope by purchasing individual components to assemble a configuration that perfectly matches your requirements
- if you own a Lomo Polam microscope whose body is in very poor condition, damaged or incomplete, for example with non-functioning focusing controls, a damaged illuminator mount or other mechanical problems

Since this database includes both the body of the Lomo Polam R-113 (Полам Р-113) and the Lomo Polam L-211 (Полам Л-211), here is a brief summary of the differences between them:
- the Lomo Polam R-113 has no built-in illumination components in the base, only an opening for a mirror or an external light source
- the Lomo Polam L-211 has a built-in right-angle mirror in the base that redirects light from the rear illuminator vertically upward, and it also provides a mounting point for the large rear illuminator
- the Lomo Polam R-113 has a permanently installed single objective holder (pincer holder) for a polarizing objective
- the Lomo Polam L-211, on the other hand, has an interchangeable mount that accepts either a single objective holder (pincer holder) or a 5-position polarizing objective nosepiece

Lomo Polam microscopes feature a standardized modular design, which means, for example:
- components such as the microscope stage holder, condenser holder, polarizing intermediate tube, monocular head or trinocular photo head from other Polam microscope models (e.g. R-113, R-211 or L-213) are compatible with this L-211 body
- this L-211 body can also be installed on other Lomo Polam models, including older ones, making it an inexpensive way to upgrade an older Polam microscope, for example one with a damaged coarse/fine focusing block
- another interesting option is replacing only the base in order to equip simpler Lomo Polam microscopes with the powerful rear-mounted illuminator

An amusing curiosity. Users of Lomo Polam microscopes, especially those unfamiliar with the Cyrillic alphabet, sometimes misread the model designation of the Lomo Polam L-211.
- the original Cyrillic designation is: Л-211
- many users mistake the letter "Л" (L) for the letter "П" (P) because they have a very similar appearance in Cyrillic
- as a result, they incorrectly read the model designation as Lomo Polam P-211
- the funny part is that there actually is a microscope model called "ЛОМО Полам Р-211" – however, the Cyrillic letter "Р" corresponds to the Latin letter "R", which makes the confusion even greater

Description of this part for the microscope.

ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no – this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976

This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.

The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.

Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.