Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

operates in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Coarse focus element.

Description of this part for the microscope.

microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Coarse focus element.

Description of this part for the microscope.

microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Coarse focus element.

Description of this part for the microscope.

Hohlspiegelkondensor 10)
- Carl Zeiss Jena Apochromat 32x microscope objective

Model: Hohlspiegelkondensor 10
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Apochromat 32x 0.65 oo
Tube length: infinity
Magnification: 32x
Numerical aperture: 0.65
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Hohlspiegelkondensor 9)
- Carl Zeiss Jena Planachromat 4x microscope objective

Model: Hohlspiegelkondensor 9
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat K 4x/0,05 oo/0 oo/2
Tube length: infinity
Magnification: 4x
Numerical aperture: 0.05
Cover glass: no OR 2 mm
Type: EPI (reflected light)
Thread: M19
Info: this microscope objective can work in oo/0 mode or after unscrewing the upper lens in oo/2 mode (e.g. for a Petri dish or through a microscope slide)

Mirror objective slides / inserts are used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Hohlspiegelkondensor 12)
- Carl Zeiss Jena Planachromat 12,5x microscope objective

Model: Hohlspiegelkondensor 12
Color: Grey
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat 12,5x 0.25 oo/0
Tube length: infinity
Magnification: 12,5x
Numerical aperture: 0.25
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Hohlspiegelkondensor 12)
- Carl Zeiss Jena Planachromat 10x microscope objective

Model: Hohlspiegelkondensor 12
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat 10x 0.20 oo/-
Tube length: infinity
Magnification: 10x
Numerical aperture: 0.20
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Mikroval series:
- Eduval
- Laboval
- Ergaval
- Amplival (the entire series, including Epival, Vertival, Amplival-Pol)
- Fluoval
- Metaval
- Telaval
- and even Epignost

Description of this part for the microscope.

Jena's Mikroval series microscopes:
- Eduval
- Laboval
- Ergaval
- Amplival (the entire series, including Epival, Vertival, Amplival-Pol)
- Fluoval
- Metaval
- Telaval
- and even Epignost

Description of this part for the microscope.

collimating lens and a mirror that reflects light vertically upward.

When attached to the Amplival model, this accessory can convert it into a microscope with EPI illumination.

The last photo shows an excerpt from the user manual describing this accessory.

Description of this part for the microscope.

This is a component of the transmitted light optical path - it is not a diaphragm for EPI reflected light.

This part fits various Carl Zeiss Jena microscope models built on the Amplival stand:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

Description of this part for the microscope.

an incandescent lamp illuminator. This lampholder is not required if you have a microscope with the original halogen illuminator - in that case, the collimator lens is a separate element mounted next to the field diaphragm.

Other used names:
- lamp holder
- lamp tube
- lamp support
- sometimes the German-language term "Lampenhaus" is used

Description of this part for the microscope.

integrated gear for adjusting the height of the microscope condenser, as well as a rack with the element on which the condenser holder is mounted.

Description of this part for the microscope.

a glass frosted filter (so-called ground glass) is located in the optical light beam path. It is mounted on a steel rod ending with a handle positioned outside the microscope base - at the rear, next to the place where the illuminator is inserted. This handle is used to insert and withdraw the frosted filter from the illumination beam path.

This design often leads to damage:
- the glass frosted filter is mounted on the rod in such a way that the glass frequently cracks
- the handle located at the rear of the microscope base very often breaks or crumbles
- the metal rod often jams and as a result of attempts to move it - bends

Here I present and offer this exact frosted filter with the complete movement mechanism:
- glass frosted filter (ground glass)
- holder for mounting the filter to the rod
- all necessary screws to attach this set to the microscope base
- plastic control knob for operating the ground glass

Description of this part for the microscope.

eu/foto/owner-1/_manuals/Carl-Zeiss-Jena-MHP-160.pdf

Description of this part for the microscope.

This diaphragm is necessary to set illumination according to the Koehler system.

This element is used in a diaphragm installed in various Carl Zeiss Jena microscope models built on the Amplival stand:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

The field diaphragm located in the microscope base is part of the transmitted light path - it is not a diaphragm for EPI (reflected) illumination. However, it is VERY LIKELY that individual blades may also fit reflected light diaphragms and other diaphragms (e.g. aperture diaphragms) in Carl Zeiss Jena microscopes and condensers.

Damage to iris diaphragm blades is one of the more common failures in Carl Zeiss Jena microscopes. Most often this occurs when:
- the lubricant in the diaphragm opening / closing mechanism dries out and the user tries to move it by force
- a foreign object gets between the blades (e.g. a glass fragment from a chipped microscope slide)
- the diaphragm is closed too quickly or opened too far

In the event of an iris diaphragm failure, it is possible to:
- replace the entire element (condenser or diaphragm module)
- replace only the diaphragm
- repair the diaphragm by replacing the damaged blades

Description of this part for the microscope.

the microscope arm
- and a mounting screw

The mounting screw itself - as a separate component - fits practically most Carl Zeiss Jena microscopes based on the Amplival system:
- Amplival
- Amplival Interphako
- Amplival Pol
- Vertival
- Peraval
- Fluoval
- Docuval

Carl Zeiss Jena developed a complete modular microscope system based on connections made with this type of screw. Thanks to this design, the screw as a service part is also compatible with most accessories, modules and components that can be mounted to the microscope, including:
- EPI arms
- Parktaric Zoom Tube module
- Interphako heads

Important - carefully check the shape and dimensions of the screw to make sure it is the size you need. For example, the modular design of the Carl Zeiss Jena Jenamed microscope is based on mounting screws of a different shape and size (search for it in this database for comparison).

Description of this part for the microscope.

4 mo2 condenser holder that was used in the Carl Zeiss Jena Ergaval microscope. The same condenser (but with a different lower lens) is used in an identical holder in Fluoval microscopes. Condenser holders with such screws can also be found in the following microscopes:
- Docuval
- Amplival
- NU-2

The purpose of this spring screw is to push the clamp in which the condenser is mounted outward. Thanks to the spring integrated in the screw, it is possible to center the condenser using long centering screws (you can find such a centering screw in the database under number 99132).

In the last photo, an arrow clearly indicates which screw is meant and where it is mounted in the condenser holder.

Description of this part for the microscope.

that was used in the Carl Zeiss Jena Ergaval microscope. The same condenser (but with a different lower lens) is used in an identical holder in Fluoval microscopes. Condenser holders with such screws can also be found in the following microscopes:
- Docuval
- Amplival
- NU-2

In the last photo, an arrow clearly indicates which screw is meant and where it is mounted in the condenser holder.

Description of this part for the microscope.

6x
Angle: 30°

Other names for this part:
- intermediate tube
- mirror tube

Description of this part for the microscope.

probably fits most Carl Zeiss Jena microscope stages models

In the photo gallery there are detailed photos of this element together with the dimensions. Thanks to this it is possible to identify exactly which part of the microscope stage it is.

Description of this part for the microscope.

operates in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Instructions on how to disassemble the mechanism in the Carl Zeiss Jena Amplival / Ergaval microscope: https://www.mikroskopie-forum.de/index.php?topic=38565.0

Description of this part for the microscope.

operates in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Instructions on how to disassemble the mechanism in the Carl Zeiss Jena Amplival / Ergaval microscope: https://www.mikroskopie-forum.de/index.php?topic=38565.0

Description of this part for the microscope.

operates in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval

Instructions on how to disassemble the mechanism in the Carl Zeiss Jena Amplival / Ergaval microscope: https://www.mikroskopie-forum.de/index.php?topic=38565.0

Description of this part for the microscope.

used, for example, in microscopes from Carl Zeiss Jena of the Mikroval series:
- Eduval
- Laboval
- Ergaval
- Amplival (entire series including Epival, Vertival, Amplival-Pol)
- Fluoval
- Metaval
- Telaval
- even Epignost

In microscope models with fluorescence illumination (e.g. Laboval Fluoreszenz or Fluoval), a filter wheel is installed in this head. When the manufacturer installed this head in other microscope models - a blanking plug was placed instead of the filter wheel - and this is exactly the element shown here.

Over the years, this element is very often lost and on the secondary market there are many such photo trino adapters without the blanking plug. The lack of this blanking plug can cause even large contaminants to enter the optics.

Description of this part for the microscope.

(and its variants: Fluoval, Epival, Vertival)
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval

Both the left and the right knob are identical, but when installing be careful about the screw length, as they may differ).

VERY IMPORTANT: although the right and left knobs are identical - different screws are used to attach them.

Lengths of screws used to attach the knobs in Carl Zeiss Jena Ergaval and Amplival microscopes:
- left fine adjustment knob (micro): 1 pc. screw 12 mm
- left coarse adjustment knob (macro): 3 pcs. screws 8 mm
- right fine adjustment knob (micro): 1 pc. screw 16 mm
- right coarse adjustment knob (macro): 3 pcs. screws 12 mm

Over the years these plastic knobs are often damaged:
- sometimes they crack due to impact or improper transport securing
- often they are partially melted by a soldering iron, light bulb or even a cigarette
- sometimes they are damaged during attempts to remove them

Description of this part for the microscope.

Amplival (and its variants: Fluoval, Epival, Vertival)
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval

Both the left and the right knob are identical, but when installing be careful about the screw length, as they may differ).

VERY IMPORTANT: although the right and left knobs are identical - different screws are used to attach them.

Lengths of screws used to attach the knobs in Carl Zeiss Jena Ergaval and Amplival microscopes:
- left fine adjustment knob (micro): 1 pc. screw 12 mm
- left coarse adjustment knob (macro): 3 pcs. screws 8 mm
- right fine adjustment knob (micro): 1 pc. screw 16 mm
- right coarse adjustment knob (macro): 3 pcs. screws 12 mm

Over the years these plastic knobs are often damaged:
- sometimes they crack due to impact or improper transport securing
- often they are partially melted by a soldering iron, light bulb or even a cigarette
- sometimes they are damaged during attempts to remove them
- sometimes, when the grease has dried out, the user tries to move the knob using pliers and damages it

Description of this part for the microscope.

meaning the shaft with focusing knobs mounted on both ends on the sides of the microscope. Part of this shaft contains a toothed rack, or more precisely speaking, it is a toothed shaft. In the item shown and offered here, the fine focus knob (micro focus) is mounted on the left end of the shaft. Please note that the left and right knobs are identical - however, screws of different lengths are used to attach them: the left knob is attached with a 12 mm screw, while the right knob uses a 16 mm screw. Detailed information about the screws used to attach the coarse and fine focus knobs can be found here: https://www.facebook.com/MikroskopyPZO/posts/pfbid0x2tFPHAEqjn4B7BRsvm2vAt9yyuuSM836QS6K4951GqeUFpU2FJH8YXfFFxbz3cPl

Such focus shafts are used in the following microscopes:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival (and its variants: Fluoval, Epival, Vertival, Interphako)
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Docuval

This coarse and fine focus shaft may help solve the following problems in Carl Zeiss Jena Ergaval / Amplival microscopes and related models:
- if the shaft became bent, causing a noticeable jump while rotating it (a very common failure)
- if the screw holding the fine focus knob broke off or snapped, leaving part of the screw inside the shaft
- if the left fine focus knob is missing or damaged
- if the thread on the right or left end of the shaft, where the fine focus knobs are attached, is damaged
- if the toothed rack on the shaft (because such a shaft is effectively a toothed shaft) becomes damaged

Description of this part for the microscope.

for taking microscope photographs or recording microscope videos. This is a gray photographic adapter.

Basic technical parameters:
- mounting connection to microscope stand: 41 mm dovetail
- output connection type on the photo port: 49 mm internal thread
- connection for binocular head mounting: Jena standard 41 mm dovetail
- magnification directed to the binocular head: 1.6x
- magnification on the photo output: none (that is 1.0x)

Because this photo head has a 49 mm threaded output, virtually any device, camera, adapter, tube or other accessory can be connected after using an appropriate 49 mm thread adapter. Direct projection technique may be used (because there is no additional optics inside), or any projection eyepieces may be installed in the optical path.

This photographic attachment is intended mainly (but not exclusively) for the following microscope models:
- Carl Zeiss Jena Eduval
- Carl Zeiss Jena Laboval
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Metaval
- Carl Zeiss Jena Telaval
- Carl Zeiss Jena Pictoval
- Carl Zeiss Jena Epignost

The list above contains Mikroval series microscopes with gray housings - just like the tube shown and offered here. However, it also works with older black Carl Zeiss Jena microscopes:
- Carl Zeiss Jena L-Stativ (models Lg, Lu and Lr)
- Carl Zeiss Jena Lumipan
- Carl Zeiss Jena Ng
- Carl Zeiss Jena Nf (and NfPk)

Please note that microscopes from other manufacturers also use the 41 / 41.5 mm dovetail connection standard. Because of this, this photographic head can also be used with microscopes made by:
- Lomo (for example Lomo Biolam)
- Meopta
- IOR
- selected Reichert microscopes (for example Reichert Neozet)
- Will Wetzlar
- Hund Wetzlar
- Leitz Wetzlar

This Carl Zeiss Jena tube is also very often used with microscopes having a larger head mounting diameter. In such cases users apply additional spacer or thickening rings. Because of this, this photo adapter also fits microscopes from manufacturers such as:
- PZO (for example the PZO Biolar model with 43 mm connection)
- Olympus (for example the Olympus CH model with 42 mm connection)

The element that allows a photographic camera or imaging camera to be connected to Carl Zeiss Jena Mikroval series microscopes may be referred to by different names. Commonly used names include:
- trino head
- trinocular head
- photo head
- photographic head
- photo attachment
- photographic attachment
- photo adapter
- photographic adapter
- photo tube
- photographic tube
- phototube
- photographic angle tube
- and various combinations of the words head, attachment, adapter or tube with terms such as photo, photographic, for camera and similar

Description of this part for the microscope.

related models.

This element is used when the microscope does not have a transmitted light illuminator with a lamp holder installed in the rear part of the base. In such a case, so that there is no open hole and no contamination can enter the inside of the microscope, this opening can be closed with this blanking plug.
When can such a situation occur that the microscope does not have a transmitted light illuminator? Most often when the microscope is intended for reflected light work only and simply does not have any DIA illuminator (transmitted light illuminator).

This element fits the following microscopes:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Interphako
- Carl Zeiss Jena Fluoval

The photo gallery contains detailed photos of this element from different sides, while the video (in the video gallery) shows exactly how this blanking plug is used and where it is mounted.

Description of this part for the microscope.

and related models.

This element is used when transmitted light is temporarily not needed. The illuminator itself does not need to be removed - instead, the light output should simply be completely blocked, and this light output is the collector lens itself. This collector lens is located inside the microscope base, above the angle mirror and below the condenser.

When can there be a need to completely block transmitted light? Most often when:
- a microscope with DIA illumination (transmitted light) and EPI illumination (reflected light) is available, but temporarily only reflected light operation is needed
- a microscope previously working with transmitted light (for example Carl Zeiss Jena Amplival) is being converted into a microscope intended to work permanently only with reflected light (for example converting an Amplival into a Vertival)
- for example a Fluoval microscope is used and it is undesirable that "the lower light is visible"

This element fits the following microscopes:
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Interphako
- Carl Zeiss Jena Fluoval
- Carl Zeiss Jena Docuval

The photo gallery contains detailed photos of this element from different sides, while the video (in the video gallery) shows exactly how this blanking plug is used and where it is mounted.

Description of this part for the microscope.

models.

This element is used when the microscope does not have an EPI illuminator (reflected light illuminator). In such a case, so that there is no open hole and no contamination can enter the inside of the microscope, this opening can be closed with this blanking plug.
When can such a situation occur that the microscope does not have a reflected light illuminator? Most often when the microscope is intended exclusively for transmitted light work and simply does not have any EPI illuminator.

This element fits the following microscopes:
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Epival
- Carl Zeiss Jena Vertival
- Carl Zeiss Jena Interphako
- Carl Zeiss Jena Fluoval

It should be noted that it is not possible to mount this blanking plug in the Carl Zeiss Jena Ergaval microscope - this model is simply a lower model than the Amplival and does not have the option of connecting an EPI illuminator.

The photo gallery contains detailed photos of this element from different sides, while the video (in the video gallery) shows exactly how this blanking plug is used and where it is mounted.

Description of this part for the microscope.

and the nosepiece is mounted from underneath.

Based on the Carl Zeiss Jena Amplival microscope, whose modular design allows for various configurations, several microscope models were created:
- Vertival
- Epival
- Amplival Interphako
- Amplival Pol
- Fluoval
and these microscopes differ from each other, among other things, by different arms. The arm from the Amplival model has the simplest construction.

By owning different arms and one microscope - you can swap them according to your needs and use different functionalities, as if you had two microscope models.

This element consists of the following components:
- fixing screw securing the arm to the microscope body
- holder enabling the mounting of components with a 41 mm mounting diameter (e.g. binocular head)
- fixing screw securing this component (e.g. head). This element is very often damaged.
- guides (slides) enabling the attachment of an interchangeable nosepiece

A device with a matching mounting diameter that is placed on the arm from above can be, for example:
- head with a built-in inclined tube
- intermediate tube (German: Zwischentubus)
- magnification changer (Optovar)
- EPI reflected light illuminator
- polarization analyzer module
- and others, because as mentioned above, the Amplival class microscopes have a modular design and there are many accessories available for them

This microscope arm can solve the following issues related to Carl Zeiss Jena Amplival class microscopes:
- if your microscope is missing this element, which happens with microscopes available on the secondary market
- if you own another variant of a microscope from this class, e.g. Carl Zeiss Jena Vertival, and you want to convert it into a "regular" Amplival
- if you own such an arm, but it is of poor quality or has damaged individual components
- if you need one of the component parts of this arm
- if you are building your own DIY project and need a mount compatible with the Carl Zeiss Jena standard

On the last photo, an arrow indicates which element it is and where it is located in the microscope to clearly identify this part.

Important: The popular and visually very similar Carl Zeiss Jena Ergaval microscope, which is often confused with the Amplival model, DOES NOT HAVE such a modular design and this arm does not fit it.

If you need any of the component parts of this arm (e.g. the large fixing screw securing the arm to the microscope stand or the smaller fixing screw securing the head to the arm - search this database or contact us by writing an email.

Description of this part for the microscope.

Amplival microscope
Number of lenses: 3
Numerical aperture N.A.: variable, from N.A. 0.16 to N.A. 1.4
Aperture diaphragm: yes, screwed on as a detachable module

The Carl Zeiss Jena pancratic condenser has three upper lenses:
- for working with low magnification objectives (usually up to 6.3x)
- Apl. 1.4 for working with high magnification objectives
- an oil immersion cardioid darkfield lens with N.A. = 1.05

Mechanically, this condenser is mounted on dovetail rails located on the microscope stage holder block.

Here are the mounting possibilities of the pancratic condenser to Carl Zeiss Jena microscopes:
- to Amplival, Docuval, Epival, Fluoval, Vertival microscopes, this condenser can be mounted directly
- to Ergaval, Nu, Nu 2, Nf microscopes, this condenser is mounted after unscrewing the aperture diaphragm from it
- to Jenaval, Jenapol, Jenalumar microscopes, this condenser can also be mounted, but it is installed together with the entire stage holder block from the Amplival microscope http://www.microscopy-uk.org.uk/mag/artfeb09/rs-jenalumar.html
- be careful, because the Lumipan microscope also features a pancratic condenser, but with a completely different mounting method

This condenser is often used as a "parts donor" for own DIY projects, for example:
- the Apl. 1.4 lens is often used to modify (upgrade) condensers with a lower numerical aperture N.A. in various microscopes
- the darkfield lens is very often used to build a standalone cardioid condenser
- the iris diaphragm has a very wide range of applications

On the last photo, an arrow indicates which element it is and where it is located in the microscope to clearly identify this part. Additionally, the attached video shows how the individual elements of this condenser move.

Description of this part for the microscope.

microscope objective
- Manufacturer: Carl Zeiss Jena
- Designation: Planachromat 25x/0,50 oo/0,17
- Magnification: 25x
- Numerical aperture N.A.: 0,50
- Optical correction: infinity-corrected tube length
- Optical correction class: planachromat
- Cover glass: yes, 0.17 mm
- Thread: M19

Some facts about Carl Zeiss Jena objectives with M19 thread (CZJ M19) and their compatibility with various microscopes from this manufacturer:
- these objectives are most commonly used for technical applications rather than biological applications, therefore most objectives available on the secondary market are intended for use without a cover glass (designation oo/0)
- CZJ M19 objectives intended for biological applications (designation oo/0,17) are most commonly used on Carl Zeiss Jena NU / NU2 microscopes
- in Carl Zeiss Jena Nf and Lumipan microscopes, CZJ M19 objectives are used together with an EPI illuminator
- CZJ M19 objectives can be used in Carl Zeiss Jena Polmi-A microscopes, but they provide a different magnification than the nominal value
- Carl Zeiss Jena Amplival / Amplival Pol / Amplival Interphako / Peraval microscopes feature interchangeable nosepieces, and a dedicated nosepiece for M19-thread objectives was also produced for these microscopes
- Carl Zeiss Jena Metaval and Neophot microscopes use newer versions of CZJ M19 objectives (with a coarse-knurled edge and shiny housing), although many users still experiment with older M19 objectives on these microscopes
- Carl Zeiss Jena Epignost and BK 70x50 microscopes were produced in various versions with completely different configurations - and some of them operate with CZJ M19 objectives
- Carl Zeiss Jena Vertival / Epival / Nf / BK 70x50 microscopes often allow the use of CZJ M19 objectives in EPI dark-field mode
- on the Carl Zeiss Jena Epityp-2 inverted metallurgical microscope, many users employ biological objectives designed for use with a cover glass, placing the microscope slide "upside down", with the cover glass facing downward toward the objective.

Description of this part for the microscope.

in the microscope.

As far as I know, the same mechanism is used in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval
- Peraval

This component is installed onto the shaft by sliding the internal tab into the keyway groove on the shaft. After tightening the round slotted nut, a locking mechanism is created that prevents the nut from loosening on its own due to vibration.

Instructions for disassembling the fine- and coarse focus mechanism in a Carl Zeiss Jena Amplival / Ergaval microscope: https://www.mikroskopie-forum.de/index.php?topic=38565.0

Description of this part for the microscope.

movement in the microscope.

As far as I know, the same mechanism is used in the following Carl Zeiss Jena microscopes:
- Ergaval
- Amplival
- Fluoval
- Vertival
- Epival
- Docuval
- Metaval
- Peraval

This component acts as a resistance regulator and functions as a friction brake. Tightening the outer element compresses the tapered section of the bushing, causing the slotted bushing to contract at the slit. This increases friction on the shaft and makes the entire mechanism move with greater resistance.

Note - in some descriptions available on the Internet, this component is referred to as a "piece of wood".

Instructions for disassembling the coarse focus and fine focus mechanism in a Carl Zeiss Jena Amplival / Ergaval microscope: https://www.mikroskopie-forum.de/index.php?topic=38565.0

Description of this part for the microscope.

Jena
Version: grey version, removed from a Carl Zeiss Jena Amplival microscope
Mounting method: aperture diaphragm in the form of a detachable module
Centerable: yes

This iris diaphragm module is mechanically mounted to the bottom of the panchromatic condenser.

In Carl Zeiss Jena panchromatic condensers, the diaphragm is designed as a detachable module because it can be removed and replaced, for example, with a phase contrast module or a polarization module. Precisely because this microscope part can be detached, it is often missing from condensers available on the secondary market - over the years it simply gets lost.

Interestingly, this microscope part is very often modified. When users do not have a phase contrast module or a polarization module, they frequently insert polarizing film or custom-made phase rings into the aperture diaphragm module and obtain the functionality they need through DIY modifications.

This module can also solve a common problem found in Carl Zeiss Jena Amplival microscopes, namely damaged diaphragm blades in the condenser.

Description of this part for the microscope.

Zeiss Jena
Model: Apl 1.4
Holder name according to the manufacturer's catalogue: Kondensor-Einhänger mo
Condenser name according to the manufacturer's catalogue: Aplanatischer Kondensor 1.4 mo / ms
Version: grey version from a Carl Zeiss Jena Ergaval microscope (as opposed to the black version used, for example, on Carl Zeiss Jena Nf microscopes)
Numerical aperture N.A.: 1.4
Aperture diaphragm: yes, mounted in the condenser holder
Wide-field lens: yes, swing-out type
Removable top lens: yes, unscrewable
Mounting diameter: the optical section (the condenser without the iris diaphragm) has a mounting diameter of 39.5 mm and can be unscrewed from the condenser holder

The complete assembly consists of the following components:
- upper Apl 1.4 lens
- removable condenser (mo / ms)
- iris diaphragm attached to the condenser holder
- condenser holder mo
- swing-out wide-field lens
- two centring screws

The last photograph in the gallery shows a page from the manufacturer's original catalogue. Arrows indicate both this exact condenser holder model and the matching condenser.

Mechanically, this condenser is mounted using a dovetail guide located beneath the microscope stage. On the Carl Zeiss Jena Ergaval this is a separate condenser mounting assembly, while on the Carl Zeiss Jena Amplival the dovetail is integrated into the microscope stage support assembly.

Description of this part for the microscope.

unscrewed. It is mounted onto the dovetail guide located underneath the microscope stage carrier and secured with a clamping screw.

Carl Zeiss Jena Ergaval microscopes were originally equipped with a condenser attached to the "MO" holder. This holder has a permanently mounted iris diaphragm and wide-field lens, while the condenser itself is screwed into the upper thread. In this configuration, the condenser cannot be exchanged.
The Carl Zeiss Jena Fluoval uses a similar arrangement, whereas the Carl Zeiss Jena Amplival was originally equipped with a panchromatic condenser.

If the user wishes to use other condensers (including those made by manufacturers other than Carl Zeiss Jena), the original condenser holder must be replaced with the MZ condenser holder. Once this has been done, any microscope condenser with a mounting diameter of 39.5 mm can be installed. Condensers with a 37 mm mounting diameter can also be used if they are fitted with a suitable adapter ring.

This is exactly such a holder for interchangeable condensers.

Basic specifications:
Manufacturer: Carl Zeiss Jena
Original documentation name and model: Kondensor-Einhänger MZ
Colour: grey, the version manufactured for the Mikroval microscope series
Internal diameter: for mounting condensers with a 39.5 mm mounting diameter (for example the Carl Zeiss Jena cardioid darkfield condenser)
Condenser retaining screw: yes, central condenser clamping screw
Centering screws: yes, two condenser centering screws
Microscope mounting: dovetail

Although this component is grey, it is also compatible with older black Carl Zeiss Jena microscopes from the 1950s and 1960s (it simply will not look completely original unless it is repainted).

This condenser holder is compatible with, among others:
- Carl Zeiss Jena Ng (black microscope)
- Carl Zeiss Jena Polmi-A (black microscope)
- Carl Zeiss Jena Nf (black microscope)
- Carl Zeiss Jena Nu (the NU-2 version is grey)
- Carl Zeiss Jena Ergaval (grey microscope)
- Carl Zeiss Jena Fluoval / Fluoval-2 (grey microscope)
- Carl Zeiss Jena Amplival and its variants (grey microscope)
- Carl Zeiss Jena Docuval (grey microscope)

Various names are used for this microscope component, including:
- condenser holder
- condenser carrier
- condenser mount
- condenser support

The last photograph includes an excerpt from the original manufacturer's documentation. An arrow indicates this exact model of condenser holder, making it easy to identify the component.

Description of this part for the microscope.

unscrewed. It is mounted onto a dovetail guide located underneath the microscope stage carrier. The condenser holder is secured to the guide with a clamping screw.

It can accommodate any microscope condenser with a mounting diameter of 39.5 mm, regardless of the manufacturer. Condensers with a 37 mm mounting diameter can also be used if they are fitted with a suitable adapter ring.

Basic specifications:
Manufacturer: Carl Zeiss Jena
Original documentation name and model: Kondensor-Einhänger MZ
Colour: black, the version manufactured for the black Carl Zeiss Jena microscopes from the 1950s and 1960s
Internal diameter: for mounting condensers with a 39.5 mm mounting diameter (for example the Carl Zeiss Jena cardioid darkfield condenser)
Condenser retaining screw: yes, central condenser clamping screw
Centering screws: yes, two condenser centering screws
Microscope mounting: dovetail

Although this microscope component is black, it is also compatible with the newer grey Carl Zeiss Jena microscopes of the Mikroval series.

This condenser holder is compatible with, among others:
- Carl Zeiss Jena Ng (black microscope)
- Carl Zeiss Jena Polmi-A (black microscope)
- Carl Zeiss Jena Nf (black microscope)
- Carl Zeiss Jena Nu (the NU-2 version is grey)
- Carl Zeiss Jena Ergaval (grey microscope)
- Carl Zeiss Jena Fluoval / Fluoval-2 (grey microscope)
- Carl Zeiss Jena Amplival and its variants (grey microscope)
- Carl Zeiss Jena Docuval (grey microscope)

Various names are used for this microscope component, including:
- condenser holder
- condenser carrier
- condenser mount
- condenser support

The last photograph includes an excerpt from the original manufacturer's documentation. An arrow indicates this exact model of the condenser holder, making it easy to identify the component.

Description of this part for the microscope.

diameter: 23.2 mm

This eyepiece allows the microscope image to be projected onto a surface such as a wall, ceiling or projection screen.

Originally, this eyepiece model was supplied with the Carl Zeiss Jena Pictoval projection microscope. It can also be installed on virtually any microscope from any manufacturer with a 23.2 mm eyepiece tube.

Important: Projecting a microscope image requires a very large amount of light, so a high-power illuminator is necessary.

Description of this part for the microscope.

head in Carl Zeiss Jena Pictoval projection microscopes (microprojectors). The adjustable tilt angle of the eyepiece tube, which held a projection eyepiece (usually f=100), allowed the position of the projected image on the projection surface to be changed.

Basic parameters:
Manufacturer: Carl Zeiss Jena
Eyepiece mounting diameter: 23.2 mm
Mounting to the microscope arm: 41 mm diameter dovetail ring

Because this microscope head has a Carl Zeiss Jena standard microscope mount (a 41 mm diameter dovetail ring), it can be mounted on most microscopes from this manufacturer (e.g. Carl Zeiss Jena Eduval, Laboval, Ergaval, Amplival, etc.), as well as on microscopes made by Lomo (e.g. Lomo Biolam), IOR and Meopta.

It seems useful to mention a few points:
- never look through this microscope head with the naked eye if a projection eyepiece is installed in it and the head is mounted in a Carl Zeiss Jena Pictoval microprojector. This may result in loss of eyesight due to the very high light output emitted by this microscope
- when mounting this microscope head on a microscope other than a Carl Zeiss Jena Pictoval, a different magnification scale may be obtained than with the original heads designed for the particular microscope model
- projecting a microscope image requires a great deal of light, i.e. a powerful illuminator. This is worth remembering if you intend to use this head to project an image from biological microscopes with standard incandescent illumination (e.g. 15 W 6 V), which is definitely not sufficient
- visual observation using this microscope head may be inconvenient because it has a different (smaller) tilt angle than standard monocular or binocular microscope heads

Description of this part for the microscope.

meters:
Manufacturer: Carl Zeiss Jena
Designation: Apl. 1,4
Name of the mount according to the manufacturer's catalogue: Kondensoreinhänger mfl 2, Bestellnummer 301080:021.26/0
Name of the condenser according to the manufacturer's catalogue: Aplanatischer Kondensor 1.4 mo / ms (applies only to the upper optical part)
Name of the condenser according to the manufacturer's catalogue: Kondensor hoher Lichtstärke mit Vorschaltsystem (applies to the entire module)
Version: grey colour with a black upper lens. Variant with a "dot" in the name after "Apl"
Numerical aperture N.A.: 1.4
Aperture diaphragm: yes, attached to the condenser mount
Wide-field lens: yes, it can be swung out of the optical path. This is the version with the large lens in a housing (see description below)
Removable upper lens: yes, it can be rotated
Mounting diameter: the optical part (condenser without diaphragm) has a mounting diameter of 39.5 mm and can be unscrewed from the condenser mount
Operating modes: the condenser can be used both as a dry condenser and as an immersion condenser

The entire part consists of the following elements:
- upper Apl. 1,4 lens
- screw-on/removable condenser (mo / ms)
- iris diaphragm screwed onto the condenser mount
- condenser mount model mfl 2
- swing-out wide-field lens
- two centering screws

This condenser is mainly used in Carl Zeiss Jena Fluoval / Fluoval-2 fluorescence microscopes. It is optimal for use with high-numerical-aperture apochromatic microscope objectives. For precisely this reason, users often install it on Carl Zeiss Jena Ergaval and Carl Zeiss Jena Amplival microscopes equipped with apochromatic objectives (Carl Zeiss Jena Apochromat).

It is worth mentioning again that this condenser can be used in two modes:
- without immersion oil on the upper lens of the condenser. In this case, it operates as a "dry condenser" and its numerical aperture N.A. is 0.9.
- with immersion oil on the upper lens of the condenser (i.e. underneath the microscope slide). In this case, it operates as an "immersion condenser" and its numerical aperture N.A. is 1.4, allowing a very bright image to be obtained – this is important in fluorescence microscopy or when using high-N.A. immersion objectives.

During production, this condenser was available in several versions:
- with a black upper lens, a dot in the model name (Apl. 1,4) and a wide-field module consisting of a single lens
- with a black upper lens, without a dot in the model name (Apl 1,4) and a single wide-field module consisting of several lenses (including one with a very small diameter)
- with a grey upper lens marked Apl 1,4mo2 and a single wide-field module consisting of several lenses (including one with a very small diameter)
- with a grey upper lens marked Apl 1,4mo2 and a wide-field module consisting of two independently swing-out lenses, each on its own mount

I have not found any information anywhere as to whether the above-mentioned versions differ in their operation. From experience, I know that they are used interchangeably – but I do not know whether any differences in operation can actually be noticed.

Mechanically, this condenser is mounted on dovetail rails located underneath the microscope stage. In Carl Zeiss Jena Ergaval microscopes, this is a separate condenser mounting block, whereas in Carl Zeiss Jena Fluoval / Amplival microscopes, the dovetail is located on the microscope stage holder block.

The manufacturer describes this condenser as follows: "High-intensity condenser with an auxiliary system for illuminating large fields while imaging the field diaphragm. [...] The condenser of the FLUOVAL 2 can be used as a dry and immersion condenser of the highest aperture to achieve the highest possible excitation intensity. It is equipped with a switchable wide-field system that illuminates the large fields of low-power objectives while providing a sharp image of the field diaphragm in the object plane."

Description of this part for the microscope.

meters:
Manufacturer: Carl Zeiss Jena
Designation: Apl. 1,4
Name of the mount according to the manufacturer's catalogue: Kondensoreinhänger mfl 2, Bestellnummer 301080:021.26/0
Name of the condenser according to the manufacturer's catalogue: Aplanatischer Kondensor 1.4 mo / ms (applies only to the upper optical part)
Name of the condenser according to the manufacturer's catalogue: Kondensor hoher Lichtstärke mit Vorschaltsystem (applies to the entire module)
Version: grey colour with a black upper lens. Variant without the "dot" in the name after "Apl"
Numerical aperture N.A.: 1.4
Aperture diaphragm: yes, attached to the condenser mount
Wide-field lens: yes, it can be swung out of the optical path. This is the version with the large lens in a housing (see description below)
Removable upper lens: yes, it can be rotated
Mounting diameter: the optical part (condenser without diaphragm) has a mounting diameter of 39.5 mm and can be unscrewed from the condenser mount
Operating modes: the condenser can be used both as a dry condenser and as an immersion condenser

The entire part consists of the following elements:
- upper Apl 1,4 lens
- screw-on/removable condenser (mo / ms)
- iris diaphragm screwed onto the condenser mount
- condenser mount model mfl 2
- swing-out wide-field lens
- two centering screws

This condenser is mainly used in Carl Zeiss Jena Fluoval / Fluoval-2 fluorescence microscopes. It is optimal for use with high-numerical-aperture apochromatic microscope objectives. For precisely this reason, users often install it on Carl Zeiss Jena Ergaval and Carl Zeiss Jena Amplival microscopes equipped with apochromatic objectives (Carl Zeiss Jena Apochromat).

It is worth mentioning again that this condenser can be used in two modes:
- without immersion oil on the upper lens of the condenser. In this case, it operates as a "dry condenser" and its numerical aperture N.A. is 0.9.
- with immersion oil on the upper lens of the condenser (i.e. underneath the microscope slide). In this case, it operates as an "immersion condenser" and its numerical aperture N.A. is 1.4, allowing a very bright image to be obtained – this is important in fluorescence microscopy or when using high-N.A. immersion objectives.

During production, this condenser was available in several versions:
- with a black upper lens, a dot in the model name (Apl. 1,4) and a wide-field module consisting of a single lens
- with a black upper lens, without a dot in the model name (Apl 1,4) and a single wide-field module consisting of several lenses (including one with a very small diameter)
- with a grey upper lens marked Apl 1,4mo2 and a single wide-field module consisting of several lenses (including one with a very small diameter)
- with a grey upper lens marked Apl 1,4mo2 and a wide-field module consisting of two independently swing-out lenses, each on its own mount

I have not found any information anywhere as to whether the above-mentioned versions differ in their operation. From experience, I know that they are used interchangeably – but I do not know whether any differences in operation can actually be noticed.

Mechanically, this condenser is mounted on dovetail rails located underneath the microscope stage. In Carl Zeiss Jena Ergaval microscopes, this is a separate condenser mounting block, whereas in Carl Zeiss Jena Fluoval / Amplival microscopes, the dovetail is located on the microscope stage holder block.

The manufacturer describes this condenser as follows: "High-intensity condenser with an auxiliary system for illuminating large fields while imaging the field diaphragm. [...] The condenser of the FLUOVAL 2 can be used as a dry and immersion condenser of the highest aperture to achieve the highest possible excitation intensity. It is equipped with a switchable wide-field system that illuminates the large fields of low-power objectives while providing a sharp image of the field diaphragm in the object plane."