|
|
SERMIK_ID number under which this microscope part is placed in the database.
00466
|
10/0.25 160/- PHACO1 10x Phase Contrast RMS microscope objective
|
|
Description of this part for the microscope.
Microscope objective.
Manufacturer: Leitz Wetzlar Germany
Model: 519757
Magnification: 10x
Numerical aperture: 0.25
Cover glass: no
Thread:
...
RMS
Tubus length: 160 mm
Focal length: 45 mm
Immersion: no (dry, air)
Info: PHACO1 Phase Contrast
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz HM-LUX 3 microscope repair parts
- Leitz 519757 10/0.25 PHACO 1 Objektiv
- Leitz Wetzlar 10x Phaco 1 phase contrast objective 160 mm
- Leitz HM-LUX 3 Phasenkontrast Objektiv 10x
- Leica 519757 phase contrast objective 10x
- Leitz Phaco 1 Hellfeld und Phasenkontrast Objektiv
- Leitz 10x Phaco objective 45 mm RMS
- Leitz 10x Phasenkontrast Objektiv Pilz - Ersatz
- Leitz Phaco 10x objective scratched - replacement
- objektiv fázový kontrast Leitz Phaco 1 10x
- objetivo contraste de fases Leitz Phaco 1 10x
- objetivo Leitz 519757 microscopio HM-LUX 3
- obiettivo contrasto di fase Leitz Phaco 1 10x
- obiettivo Leitz 519757 microscopio HM-LUX 3
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
HM-LUX 3
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope lacks a 10x phase contrast objective
-
if you have a 10x PHACO1 objective damaged or in poor condition
-
if you have a microscope from any manufacturer that supports TL=160 FL=45 objectives, this is also a lens for you
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00522
|
Carl Zeiss Jena 20x Achromat M25-thread microscope objective Jenamed
|
|
Description of this part for the microscope.
Perfect exterior and optics. It's hard to find a lens in this condition on the used market.
Manufacturer: Carl Zeiss Jena
Magnification: 20x
Model: Achromat
...
20x / 0.45 oo/0.17-A
Color correction: Achromat
Numerical aperture: 0.45
Tube length: infinity
Focal length: not sure
Cover glass: 0.17 mm
Immersion: no
Thread: M25
This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenalab microscope repair parts
- Leica DMLS
- Leica DMLB
- Leica DM1000
- Carl Zeiss Jena 20x microscope objective infinity
- Carl Zeiss Jena 20x Mikroskop Objektiv unendlich
- Carl Zeiss Jena Achromat 20/0.45 oo/0.17-A M25
- Carl Zeiss Jena Jenamed 20x infinity objective M25
- Jenalab / Jenaval 20x Objektiv unendlich
- CZJ Jenalumar Achromat 20x objective
- Carl Zeiss Jena 20x M25 Objektiv Pilz - Ersatz
- Jenamed 20x objective scratched - replacement
- objektiv Carl Zeiss Jena Achromat 20x M25
- objetivo Carl Zeiss Jena Achromat 20x infinito M25
- objetivo 20x microscopio Carl Zeiss Jena Jenamed
- obiettivo Carl Zeiss Jena Acromatico 20x infinito M25
- obiettivo 20x microscopio Carl Zeiss Jena Jenamed
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenalab
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
Jenamed or Jenalab microscopes often don't have a 20x objective lens installed.
-
If you have one, but it's of very poor quality or damaged.
-
If you're cautious and want to have one as a spare.
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00521
|
Carl Zeiss Jena Achromat HI 100x M25-thread microscope objective
|
|
Description of this part for the microscope.
Perfect exterior and optics. It's hard to find a lens in this condition on the used market.
Manufacturer: Carl Zeiss Jena
Magnification: 100x
Model:
...
Achromat HI 100x / 1,25 oo/0.17-A
Color correction: Achromat
Numerical aperture: 1,25
Tube length: infinity
Focal length: not sure
Cover glass: 0.17 mm
Immersion: yes, oil
Thread: M25
This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenalab microscope repair parts
- Leica DMLS
- Leica DMLB
- Leica DM1000
- Carl Zeiss Jena 100x microscope objective infinity
- Carl Zeiss Jena Immersion Mikroskopobjektiv 100x
- Carl Zeiss Jena Oel Mikroskop Objektiv unendlich
- Carl Zeiss Jena Achromat HI 100/1.25 oo/0.17-A M25
- Carl Zeiss Jena Jenamed 100x oil infinity objective M25
- Jenalab / Jenaval 100x Öl Objektiv unendlich
- Leica DMLS / DMLB 100x M25 oil objective
- Carl Zeiss Jena 100x Öl Frontlinse zerkratzt - Ersatz
- Jenamed 100x oil objective fungus - replacement
- objektiv 100x olejová imerze Carl Zeiss Jena M25
- objetivo 100x inmersión Carl Zeiss Jena infinito M25
- objetivo 100x aceite microscopio Carl Zeiss Jena Jenamed
- obiettivo 100x ad immersione Carl Zeiss Jena infinito M25
- obiettivo 100x a olio microscopio Carl Zeiss Jena Jenamed
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
89 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenalab
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope that doesn't have an objective lens with this magnification
-
If you have such a lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00540
|
Leitz Wetzlar EF 4 / 0,12 P microscope objective 4x, RMS EF4/0.12P 160/- 559212 Pol Polarisation
|
|
Description of this part for the microscope.
Leitz Wetzlar polarizing microscope lens.
Perfect exterior and optics. It's not easy to find a lens in this condition on the used market.
Manufacturer:
...
Leitz Wetzlar (Leica)
Magnification: 4x
Model: EF4/0.12P 160/- 559212
Color correction: Plan Achromat
Field of view: 18 mm
Numerical aperture: 0.12
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: EF = Ebenes Feld (plan field)
Info: P = Polarizing (stain-free lens with anti-reflective coating)
Leitz P/N: 559212
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for super-macro photography and stacking.
Of course, the "P" designation doesn't mean it's designed "solely" for polarizing. It can be used in any microscope for both polarization, brightfield, transmitted light and reflected EPI.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Laborlux 11 Pol S microscope repair parts
- obiektyw mikroskopowy polaryzacyjny Leitz 4x
- Leitz Pol 4x Mikroskop Objektiv
- Leitz EF 4/0.12 P 160/- 559212
- Leitz 559212 Pol objective 4x strain free
- Leitz Laborlux 11 Pol S Objektiv 4x
- Leitz Wetzlar plan achromat 4x polarization objective
- Leica 559212 Polarisationsobjektiv spannungsfrei
- Leitz Pol Objektiv 4x Pilz - Ersatz
- polarizační objektiv Leitz 4x 559212
- objetivo de polarización Leitz 4x 559212
- objetivo Pol microscopio Leitz Laborlux 11 Pol S
- obiettivo polarizzazione Leitz 4x 559212
- obiettivo Pol microscopio Leitz Laborlux 11 Pol S
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Laborlux 11 Pol S
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you want to replace your 4x objective lens with one of excellent quality
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00541
|
Leitz Wetzlar EF 10 / 0,25 P microscope objective 4x, RMS EF10/0.25P 160/- 559213 Pol Polarisation
|
|
Description of this part for the microscope.
Leitz Wetzlar polarizing microscope lens.
Perfect exterior and optics. It's not easy to find a lens in this condition on the used market.
Manufacturer:
...
Leitz Wetzlar (Leica)
Magnification: 10x
Model: EF 10/0.25 P 160/- 559213
Color correction: Plan Achromat
Field of view: 18 mm
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: EF = Ebenes Feld (plan field)
Info: P = Polarizing (stain-free lens with anti-reflective coating)
Leitz P/N: 559213
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for super-macro photography and stacking.
Of course, the "P" designation doesn't mean it's designed "solely" for polarizing. It can be used in any microscope for both polarization, brightfield, transmitted light and reflected EPI.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Laborlux 11 Pol S microscope repair parts
- obiektyw mikroskopowy polaryzacyjny Leitz 10x
- Leitz Pol 10x Mikroskop Objektiv
- Leitz EF 10/0.25 P 160/- 559213
- Leitz 559213 Pol objective 10x strain free
- Leitz Laborlux 11 Pol S Objektiv 10x
- Leitz Wetzlar plan achromat 10x polarization objective
- Leica 559213 Polarisationsobjektiv spannungsfrei
- Leitz Pol Objektiv 10x Pilz - Ersatz
- polarizační objektiv Leitz 10x 559213
- objetivo de polarización Leitz 10x 559213
- objetivo Pol microscopio Leitz Laborlux 11 Pol S
- obiettivo polarizzazione Leitz 10x 559213
- obiettivo Pol microscopio Leitz Laborlux 11 Pol S
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Laborlux 11 Pol S
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you want to replace your 10x objective lens with one of excellent quality
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00548
|
Carl Zeiss Jena Ph HI 90 1,25 Phase Contrast microscope objective (Phasenkontrast 90x)
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: Ph HI 90 1.25
Magnification: 90x
Correction: Achromat
Numerical Aperture: 1.25
Tube Length: 160 mm
Focal Length:
...
33 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast.
This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective lens of this quality on the used parts market.
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lg microscope repair parts
- Carl Zeiss Jena Ph 90x Mikroskop Objektiv
- obiektyw mikroskopowy Carl Zeiss Jena Ph 90x
- kontrast fazowy Carl Zeiss Jena 90x
- Carl Zeiss Jena Ph HI 90/1.25 Objektiv
- Carl Zeiss Jena 90x oil phase contrast objective 160 mm
- Carl Zeiss Jena Lumipan / Lg Phasenkontrast Objektiv 90x
- Carl Zeiss Jena Nf / Ng phase contrast 90x oil
- Carl Zeiss Jena Ph 90x 33 mm short objective
- Carl Zeiss Jena Ph 90x Öl Frontlinse zerkratzt - Ersatz
- objektiv fázový kontrast Carl Zeiss Jena Ph 90x
- objetivo contraste de fases Carl Zeiss Jena Ph 90x
- objetivo 90x aceite microscopio Carl Zeiss Jena Lumipan
- obiettivo contrasto di fase Carl Zeiss Jena Ph 90x
- obiettivo 90x a olio microscopio Carl Zeiss Jena Lg
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lg
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00639
|
FOZ "Lomo" 8x microscope objective (Lomo Biolam / Opta UM-301)
|
|
Description of this part for the microscope.
RMS Microscope Objective with 8x Magnification
Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union)
Magnification: 8x
Tube
...
Length: 160 mm
Focal Length: 33 mm
Thread: RMS
This objective was manufactured for microscopes:
- Junat-1P
- OPTA UShM-1
- Opta UM-301
but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO.
Names, descriptions, terms, and search contexts under which this part is searched.
- FOZ Opta Opta UM-301 microscope repair parts
- Lomo Biolam 8x Objektiv 33 mm
- Bresser Biolam 8x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 8x objective
- Opta Junat-P1 8x objective
- Opta UShM-1 8x Objektiv
- Opta UM-301 8x objective
- FOZ Feodosia 8x RMS Objektiv 160 mm
- Feodosia Optical Plant 8x objective 33 mm short
- Lomo MBB-1 8x objective replacement
- FOZ 8x Objektiv Pilz - Ersatz
- objektiv 8x FOZ Opta Feodosia
- objetivo 8x FOZ Opta para microscopio Lomo Biolam
- objetivo 8x 33 mm para microscopio Carl Zeiss Jena Lumipan
- obiettivo 8x FOZ Opta per microscopio Lomo Biolam
- obiettivo 8x per microscopio Carl Zeiss Jena Lumipan
- FOZ Opta buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
19 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
FOZ Opta
Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Opta UM-301
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(FOZ Opta)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Opta microscope with original parts
-
If you need an 8x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
This is a very good lens for macro photography (photo stacking)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00638
|
FOZ "Lomo" 20x microscope objective (Lomo Biolam / Opta UM-301)
|
|
Description of this part for the microscope.
RMS Microscope Objective with 20x Magnification
Manufacturer: Feodosia Optochesky Zavod (Feodosia Optical Plant, former Soviet Union)
Magnification:
...
20x
Tube Length: 160 mm
Focal Length: 33 mm
Thread: RMS
This objective was manufactured for microscopes:
- Junat-1P
- OPTA UShM-1
- Opta UM-301
but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO.
Names, descriptions, terms, and search contexts under which this part is searched.
- FOZ Opta Opta UM-301 microscope repair parts
- Lomo Biolam 20x Objektiv 33 mm
- Bresser Biolam 20x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 20x objective
- Opta Junat-P1 20x objective
- Opta UShM-1 20x Objektiv
- Opta UM-301 20x objective
- FOZ Feodosia 20x RMS Objektiv 160 mm
- Feodosia Optical Plant 20x objective 33 mm short
- Lomo MBB-1 20x objective replacement
- FOZ 20x Objektiv Pilz - Ersatz
- objektiv 20x FOZ Opta Feodosia
- objetivo 20x FOZ Opta para microscopio Lomo Biolam
- objetivo 20x 33 mm para microscopio Carl Zeiss Jena Lumipan
- obiettivo 20x FOZ Opta per microscopio Lomo Biolam
- obiettivo 20x per microscopio Carl Zeiss Jena Lumipan
- FOZ Opta buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
FOZ Opta
Feodosijskij Optoczeskij Zawod (Feodosia Optical Plant), CCCP
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Opta UM-301
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(FOZ Opta)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Opta microscope with original parts
-
If you need an 20x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00633
|
IOR Bucuresti 10x0.30 160/- microscope objective (ML-4M, Lomo Biolam, Carl Zeiss Jena Lg)
|
|
Description of this part for the microscope.
RMS microscope objective with 10x magnification.
Manufacturer: IOR Bucuresti (Romania)
Magnification: 10x
Numerical aperture: 0.30
Tube length: 160
...
mm
Focal length: 33 mm
Thread: RMS
This objective is an exact replica of the identical Carl Zeiss Jena objective.
Names, descriptions, terms, and search contexts under which this part is searched.
- IOR ML-4M microscope repair parts
- IOR ML-4M 10x Objektiv
- Lomo Biolam 10x Objektiv 33 mm
- Bresser Biolam 10x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 10x objective
- IOR Bucuresti 10x0.30 160/- Objektiv
- IOR Bucuresti 10x RMS objective 33 mm
- Carl Zeiss Jena Lg 10x objective replacement
- Lomo MBB-1 10x objective
- IOR 10x Objektiv Pilz - Ersatz
- objektiv 10x IOR Bucuresti
- objetivo 10x IOR para microscopio Lomo Biolam
- objetivo 10x para microscopio Carl Zeiss Jena Lumipan
- obiettivo 10x IOR per microscopio Lomo Biolam
- obiettivo 10x per microscopio Carl Zeiss Jena Lg
- IOR buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
IOR
Intreprinderea Optică Română (IOR)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
ML-4M
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(IOR)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your IOR microscope with original parts
-
If you need an 10x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00643
|
Carl Zeiss Jena Ph 20 0,40 Phase Contrast microscope objective (Phasenkontrast 20x)
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: Ph 20 0,40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 33
...
mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast.
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lg microscope repair parts
- Carl Zeiss Jena Ph 20x Mikroskop Objektiv
- obiektyw mikroskopowy Carl Zeiss Jena Ph 20x
- kontrast fazowy Carl Zeiss Jena 20x
- Carl Zeiss Jena Ph 20x RMS
- Carl Zeiss Jena Ph 20/0.40 Objektiv
- Carl Zeiss Jena 20x phase contrast objective 160 mm
- Carl Zeiss Jena Lumipan / Lg Phasenkontrast Objektiv 20x
- Carl Zeiss Jena Nf / Ng phase contrast 20x
- Carl Zeiss Jena Ph 20x 33 mm short objective
- Carl Zeiss Jena Ph 20x Frontlinse zerkratzt - Ersatz
- objektiv fázový kontrast Carl Zeiss Jena Ph 20x
- objetivo contraste de fases Carl Zeiss Jena Ph 20x
- objetivo 20x microscopio Carl Zeiss Jena Lumipan
- obiettivo contrasto di fase Carl Zeiss Jena Ph 20x
- obiettivo 20x microscopio Carl Zeiss Jena Lg
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lg
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00679
|
Lomo 10 0.30 microscope objective 1976 (10x Lomo Biolam, Carl Zeiss Jena Lg)
|
|
Description of this part for the microscope.
RMS microscope objective with 10x magnification.
Manufacturer: Lomo
Magnification: 10x
Numerical aperture: 0.30
Tube length: 160 mm
Focal length: 33
...
mm
Thread: RMS
YOM: 1976
This lens was produced as an OEM for many vendors. It can be found without any manufacturer name (commonly found on Bresser Biolam microscopes), or with the "BoB" or "Fujiopt Tokyo" logo engraved on it.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo Biolam 10x Objektiv Baujahr 1976
- Bresser Biolam 10x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 10x objective
- IOR ML-4M 10x objective
- LOMO 10 0.30 Objektiv RMS
- LOMO 10x objective 33 mm short barrel Baujahr 1976
- ЛОМО 10 0.30 объектив
- Lomo MBB-1 10x Objektiv
- LOMO 10x Frontlinse zerkratzt - Ersatz
- LOMO 10x objective fungus - replacement
- objektiv LOMO 10x a Zeiss Jena
- objetivo LOMO 10x para microscopio Lomo Biolam
- objetivo 10x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 10x per microscopio Lomo Biolam
- obiettivo 10x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need an 10x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
if you have a Lomo microscope from 1976 (the serial number starts with "76") and you want to have "period" lenses in it.
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00678
|
Lomo 3,7 0,11 microscope objective, Lomo 3,7x RMS macro photo objective, close-up lens, macro stacking, macro photography, Lomo Biolam Mikroskopobjektiv, Bresser Biolam Mikroskop Objektiv
|
|
Description of this part for the microscope.
RMS microscope objective with 3.7x magnification.
Manufacturer: Lomo
Version: OEM - without manufacturer's name engraved - the latest export version for
...
Bresser Biolam microscopes
Magnification: 3.7x
Numerical Aperture: 0.11
Tube Length: 160 mm
Focal Length: 33 mm
Thread: RMS
Due to its superior optical quality, this objective is used for macro photography, especially for stacking images.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo Biolam 3.7x Objektiv
- Bresser Biolam 3.7x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 3.7x objective
- IOR ML-4M 3.7x objective
- LOMO 3.7 0.11 Objektiv RMS
- LOMO 3.7x objective 33 mm short barrel
- ЛОМО 3.7 0.11 объектив
- Lomo MBB-1 3.7x Objektiv
- LOMO 3.7x Makro Objektiv Focus Stacking
- LOMO 3.7x macro photo objective close-up
- LOMO 3.7x Frontlinse zerkratzt - Ersatz
- LOMO 3.7x objective fungus - replacement
- objektiv LOMO 3.7x a Zeiss Jena
- objetivo LOMO 3.7x para microscopio Lomo Biolam
- objetivo 3.7x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 3.7x per microscopio Lomo Biolam
- obiettivo 3.7x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
Primarily if you're looking for a reasonably priced, high-quality lens for macro photography
-
If you want to upgrade your Bresser or Lomo microscope with original parts
-
...
-
If you need a low-power lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm parameters
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00740
|
Lomo 8 0.20 microscope objective (RMS 8x / 1985)
|
|
Description of this part for the microscope.
RMS microscope objective with 8x magnification.
Manufacturer: Lomo
Magnification: 8x
Numerical aperture: 0.20
Tube length: 160 mm
Focal length: 33
...
mm
Thread: RMS
YOM: 1985
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo Biolam 8x Objektiv Baujahr 1985
- Bresser Biolam 8x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 8x objective
- IOR ML-4M 8x objective
- LOMO 8 0.20 Objektiv RMS
- LOMO 8x objective 33 mm short barrel Baujahr 1985
- ЛОМО 8 0.20 объектив
- Lomo MBB-1 8x Objektiv
- LOMO 8x Makrofotografie Balgengerät
- LOMO 8x Frontlinse zerkratzt - Ersatz
- LOMO 8x objective fungus - replacement
- objektiv LOMO 8x a Zeiss Jena
- objetivo LOMO 8x para microscopio Lomo Biolam
- objetivo 8x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 8x per microscopio Lomo Biolam
- obiettivo 8x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need an 8x lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
if you have a Lomo microscope from 1985 (the serial number starts with "85") and you want to have "period" lenses in it.
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
90736
|
Lomo WI 40 0.75 microscope objective (water immersion, RMS 40x / 1991)
|
|
Description of this part for the microscope.
40x RMS microscope objective lens with increased numerical aperture and water immersion.
Manufacturer: Lomo
Model: WI 40 0.75
Magnification:
...
40x
Numerical aperture: 0.75
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes, water immersion
Thread: RMS
YOM: 1991
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo Biolam 40x Objektiv Baujahr 1991
- Bresser Biolam 40x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 40x objective
- IOR ML-4M 40x objective
- LOMO WI 40 0.75 Objektiv RMS
- LOMO 40x objective 33 mm short barrel Baujahr 1991
- ЛОМО WI 40 0.75 объектив
- Lomo MBB-1 40x Objektiv
- LOMO WI 40x Wasserimmersion Objektiv
- LOMO 40x water immersion objective 0.75
- LOMO 40x Frontlinse zerkratzt - Ersatz
- LOMO 40x objective fungus - replacement
- objektiv LOMO 40x a Zeiss Jena
- objetivo LOMO 40x para microscopio Lomo Biolam
- objetivo 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x per microscopio Lomo Biolam
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 40x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1991 (the serial number begins with "91") and want original-era objectives
-
If you don't like oil immersion but want better image quality than standard, dry 40x objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
90737
|
Lomo PLAN 9x 0.20 microscope objective (RMS / 1991)
|
|
Description of this part for the microscope.
RMS microscope objective with 9x magnification and plan achromatic correction.
Manufacturer: Lomo
Model: PLAN 9x0.20
Magnification: 9x
Correction: Plan
...
Achromat
Numerical Aperture: 0.20
Tube Length: 160 mm
Focal Length: 33 mm
Immersion: No
Thread: RMS
YOM: 1991
NOTE - Although this is a plan achromatic objective, it does not require dedicated plan compensation optics (e.g., special eyepieces). This makes it very popular for macro photography ? it has a 9:1 magnification ratio, no distortion at the image edge, and operates in direct projection mode.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo Biolam 9x Objektiv Baujahr 1991
- Bresser Biolam 9x Objektiv Ersatz
- Carl Zeiss Jena Lumipan 9x objective
- IOR ML-4M 9x objective
- LOMO PLAN 9x 0.20 Objektiv RMS
- LOMO 9x objective 33 mm short barrel Baujahr 1991
- ЛОМО PLAN 9x 0.20 объектив
- Lomo MBB-1 9x Objektiv
- LOMO Plan 9x Planachromat Makro Stacking
- LOMO Plan 9x plan achromat macro photography
- LOMO 9x Frontlinse zerkratzt - Ersatz
- LOMO 9x objective fungus - replacement
- objektiv LOMO 9x a Zeiss Jena
- objetivo LOMO 9x para microscopio Lomo Biolam
- objetivo 9x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 9x per microscopio Lomo Biolam
- obiettivo 9x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 9x objective lens for a flat image for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1991 (the serial number begins with "91") and want lenses from that era
-
If you're looking for an interesting lens for macro photography and photo stacking.
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00760
|
PZO 20/0,40 PhA Anoptral Phase Contrast microscope objective 20x
|
|
Description of this part for the microscope.
Manufacturer: PZO Poland
Model: 20/0,40 PhA
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 33
...
mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = negative (anoptral) phase contrast (yellow bar).
Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL
This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MB-10 microscope repair parts
- obiektyw mikroskopowy PZO 20/0.40 PhA
- PZO 20/0.40 PhA Objektiv
- PZO 20x Anoptral Phasenkontrast Objektiv 33 mm
- PZO MB-10 anoptral phase contrast objective 20x
- Lomo Biolam PhA 20x Objektiv
- Bresser Biolam Anoptral Objektiv 20x
- Carl Zeiss Jena Lumipan anoptral phase objective 20x
- PZO K3Ph Kondensor PhA Objektiv 20x
- kontrast fazowy anoptralny PZO
- PZO 20x PhA Objektiv Pilz - Ersatz
- objektiv anoptrální fázový kontrast PZO 20x
- objetivo contraste de fases anoptral PZO 20x
- objetivo 20x para microscopio Lomo Biolam
- obiettivo contrasto di fase anoptrale PZO 20x
- obiettivo 20x per microscopio Carl Zeiss Jena Lumipan
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MB-10
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00762
|
GS Flat 10/0.25 160/- microscope objective 10x
|
|
Description of this part for the microscope.
Manufacturer: GS (Gillett & Sibert)
Model: FLAT 10/0.25 160/-
Magnification: 10x
Correction: Plan-Achromat
Numerical Aperture: 0.25
Tube Length: 160
...
mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- GS Lablynx microscope repair parts
- GS 10x Mikroskop Objektiv
- GS FLAT 10/0.25 160/- Objektiv
- Gillett & Sibert FLAT 10/0.25 160/- microscope objective
- GS Lablynx Planachromat Objektiv 10x
- Gillett Sibert plan achromat flat objective 10x 160 mm
- Carl Zeiss Jena Amplival / Ergaval 10x Objektiv Ersatz
- Olympus CH-2 10x objective replacement
- Zeiss Standard 14 10x RMS Objektiv
- GS 10x Objektiv Pilz - Ersatz
- objektiv GS Gillett & Sibert 10x
- objetivo GS Gillett & Sibert 10x
- objetivo 10x para microscopio PZO Biolar
- obiettivo GS Gillett & Sibert 10x
- obiettivo 10x per microscopio PZO Biolar
- GS buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
34 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
GS
Gillett & Sibert London, England
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lablynx
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(GS)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00764
|
GS 100/1.30 160/Oil microscope objective 100x
|
|
Description of this part for the microscope.
Manufacturer: GS (Gillett & Sibert)
Model: 100/1.30 160/OIL
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,30
Tube Length: 160 mm
Focal
...
Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- GS Lablynx microscope repair parts
- GS 100x Mikroskop Objektiv
- GS 100/1.30 160/Oil Objektiv
- Gillett & Sibert 100/1.30 160/Oil microscope objective
- GS Lablynx Ölimmersion Objektiv 100x
- Gillett Sibert oil immersion objective 100x 160 mm
- Carl Zeiss Jena Amplival / Ergaval 100x Objektiv Ersatz
- Olympus CH-2 100x objective replacement
- Zeiss Standard 14 100x RMS Objektiv
- GS 100x Objektiv Pilz - Ersatz
- objektiv GS Gillett & Sibert 100x
- objetivo GS Gillett & Sibert 100x
- objetivo 100x para microscopio PZO Biolar
- obiettivo GS Gillett & Sibert 100x
- obiettivo 100x per microscopio PZO Biolar
- GS buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
GS
Gillett & Sibert London, England
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lablynx
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(GS)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00763
|
GS FL 55/0.95 160/Oil microscope objective 55x
|
|
Description of this part for the microscope.
Manufacturer: GS (Gillett & Sibert)
Model: FL 55/0.95 160/OIL
Magnification: 55x
Correction: Fluor
Numerical Aperture: 0,95
Tube Length: 160 mm
Focal
...
Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
This is an oil-immersion objective with a high numerical aperture. It is recommended for working with fluorescent light or for those whose primary magnification is around 40x, 45x, 50x, 55x, 60x, or 63x and who want to achieve the highest possible quality and detail visibility.
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- GS Lablynx microscope repair parts
- GS 55x Mikroskop Objektiv
- GS FL 55/0.95 160/Oil Objektiv
- Gillett & Sibert FL 55/0.95 160/Oil microscope objective
- GS Lablynx Fluorit Öl Objektiv 55x
- Gillett Sibert fluorite oil objective 55x 160 mm
- Carl Zeiss Jena Amplival / Ergaval 55x Objektiv Ersatz
- Olympus CH-2 55x objective replacement
- Zeiss Standard 14 55x RMS Objektiv
- GS 55x Objektiv Pilz - Ersatz
- objektiv GS Gillett & Sibert 55x
- objetivo GS Gillett & Sibert 55x
- objetivo 55x para microscopio PZO Biolar
- obiettivo GS Gillett & Sibert 55x
- obiettivo 55x per microscopio PZO Biolar
- GS buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
44 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
GS
Gillett & Sibert London, England
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lablynx
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(GS)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00159
|
Swift (Japan) M40x 0,65 210/- RMS metallurgical microscope objective
|
|
Description of this part for the microscope.
Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan)
...
before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s.
Item: Microscope Objective
Type: Metallurgical Objective
Manufacturer: Swift Japan
Model: M40x 0.65 210/-
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0.65
Tube Length: 210 mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS
210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip.
This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator.
Names, descriptions, terms, and search contexts under which this part is searched.
- SWIFT (Japan) Metallurgical microscope repair parts
- Swift M4000 metallurgical objective 40x
- Swift Japan M40x 0.65 210/- Objektiv
- Swift M40x metallurgical microscope objective tube length 210 mm
- Swift Metallmikroskop Auflicht Objektiv 40x RMS
- Swift Japan reflected light objective 40x
- Swift 40x Objektiv Pilz - Ersatz
- objektiv Swift M40x metalurgický
- objetivo metalográfico Swift M40x 210 mm
- objetivo luz reflejada Swift Japan 40x
- obiettivo metallografico Swift M40x 210 mm
- obiettivo luce riflessa Swift Japan 40x
- SWIFT (Japan) buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
SWIFT (Japan)
Swift Optical Instruments (Japan)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Metallurgical
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(SWIFT (Japan))
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a lens for working without a cover glass
-
if you need a lens for extreme macro photography
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
90159
|
Swift (Japan) M100x 0,8 210/- RMS metallurgical microscope objective
|
|
Description of this part for the microscope.
Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan)
...
before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s.
Item: Microscope Objective
Type: Metallurgical Objective
Manufacturer: Swift Japan
Model: M100x 0.8 210/-
Magnification: 100x
Correction: Achromat
Numerical Aperture: 0.8
Tube Length: 210 mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS
210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip.
This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator.
Names, descriptions, terms, and search contexts under which this part is searched.
- SWIFT (Japan) Metallurgical microscope repair parts
- Swift M4000 metallurgical objective 100x
- Swift Japan M100x 0.8 210/- Objektiv
- Swift M100x metallurgical microscope objective tube length 210 mm
- Swift Metallmikroskop Auflicht Objektiv 100x RMS
- Swift Japan reflected light objective 100x
- Swift 100x Objektiv Pilz - Ersatz
- objektiv Swift M100x metalurgický
- objetivo metalográfico Swift M100x 210 mm
- objetivo luz reflejada Swift Japan 100x
- obiettivo metallografico Swift M100x 210 mm
- obiettivo luce riflessa Swift Japan 100x
- SWIFT (Japan) buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
SWIFT (Japan)
Swift Optical Instruments (Japan)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Metallurgical
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(SWIFT (Japan))
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a lens for working without a cover glass
-
if you need a 100x objective for non-oil immersion work
-
if you need a lens for extreme macro photography
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99007
|
Will Wetzlar L4 (and CBS Beck Kassel) Stereo Microscope 2x Stereo Objective
|
|
Description of this part for the microscope.
Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits
...
this microscope.
Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 2x
Dimensions are shown in the photos.
Names, descriptions, terms, and search contexts under which this part is searched.
- Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
- Will Wetzlar Stereomikroskop Objektiv 2x
- Will Wetzlar stereo microscope objective 2x
- CBS Beck Kassel Stereomikroskop Objektiv 2x
- CBS Kassel stereo microscope objective 2x
- Will Wetzlar L4 Prismenlupe Objektivpaar 2x
- Will Wetzlar Stereoskopische Prismenlupe L4 objective 2x
- CBS Beck Kassel Stereomikroskop Objektiv Ersatz
- Will L4 Objektiv Pilz - Ersatz
- objektiv 2x stereolupa Will Wetzlar L4
- objetivo 2x lupa estereoscópica Will Wetzlar L4
- objetivo estéreo CBS Beck Kassel
- obiettivo 2x lente stereoscopica Will Wetzlar L4
- obiettivo stereo CBS Beck Kassel
- Will Wetzlar buy spare parts
|
The number of pieces of this microscope part that we have to offer.
5
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Will Wetzlar
Will Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Stereoskopische Prismenlupe L4
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Will Wetzlar)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If your microscope lacks an objective lens with this magnification
-
If you have such an objective lens, but it is damaged
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99005
|
Will Wetzlar L4 Stereo Microscope 5x Stereo Objective (and CBS Beck Kassel)
|
|
Description of this part for the microscope.
Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits
...
this microscope.
Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 5x
Dimensions are shown in the photos.
Names, descriptions, terms, and search contexts under which this part is searched.
- Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
- Will Wetzlar Stereomikroskop Objektiv 5x
- Will Wetzlar stereo microscope objective 5x
- CBS Beck Kassel Stereomikroskop Objektiv 5x
- CBS Kassel stereo microscope objective 5x
- Will Wetzlar L4 Prismenlupe Objektivpaar 5x
- Will Wetzlar Stereoskopische Prismenlupe L4 objective 5x
- CBS Beck Kassel Stereomikroskop Objektiv Ersatz
- Will L4 Objektiv Pilz - Ersatz
- objektiv 5x stereolupa Will Wetzlar L4
- objetivo 5x lupa estereoscópica Will Wetzlar L4
- objetivo estéreo CBS Beck Kassel
- obiettivo 5x lente stereoscopica Will Wetzlar L4
- obiettivo stereo CBS Beck Kassel
- Will Wetzlar buy spare parts
|
The number of pieces of this microscope part that we have to offer.
3
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Will Wetzlar
Will Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Stereoskopische Prismenlupe L4
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Will Wetzlar)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If your microscope lacks an objective lens with this magnification
-
If you have such an objective lens, but it is damaged
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99006
|
Will Wetzlar L4 Stereo Microscope 10x Stereo Objective (and CBS Beck Kassel)
|
|
Description of this part for the microscope.
Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits
...
this microscope.
Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 10x
Dimensions are shown in the photos.
Names, descriptions, terms, and search contexts under which this part is searched.
- Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
- Will Wetzlar Stereomikroskop Objektiv 10x
- Will Wetzlar stereo microscope objective 10x
- CBS Beck Kassel Stereomikroskop Objektiv 10x
- CBS Kassel stereo microscope objective 10x
- Will Wetzlar L4 Prismenlupe Objektivpaar 10x
- Will Wetzlar Stereoskopische Prismenlupe L4 objective 10x
- CBS Beck Kassel Stereomikroskop Objektiv Ersatz
- Will L4 Objektiv Pilz - Ersatz
- objektiv 10x stereolupa Will Wetzlar L4
- objetivo 10x lupa estereoscópica Will Wetzlar L4
- objetivo estéreo CBS Beck Kassel
- obiettivo 10x lente stereoscopica Will Wetzlar L4
- obiettivo stereo CBS Beck Kassel
- Will Wetzlar buy spare parts
|
The number of pieces of this microscope part that we have to offer.
4
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Will Wetzlar
Will Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Stereoskopische Prismenlupe L4
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Will Wetzlar)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If your microscope lacks an objective lens with this magnification
-
If you have such an objective lens, but it is damaged
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00867
|
Lomo WI 40 0.75 L microscope objective (fluorescence water immersion, RMS 40x / 1974)
|
|
Description of this part for the microscope.
Microscope objective with RMS thread and 40x magnification, featuring increased numerical aperture, designed for water immersion and optimized optical correction for
...
fluorescence illumination.
Manufacturer: LOMO
Model: WI 40 0.75 L
Magnification: 40x
Numerical aperture: 0.75
Optical correction: achromat, optimized for fluorescence microscopy
Tube length: 160 mm
Focal length: approx. 33 mm
Immersion: water
Designation: L = luminescence
Thread: RMS
Year of manufacture: 1974
Despite the L designation, the objective can of course also be used with standard transmitted light illumination.
LOMO objectives marked with L luminescence differ from non-marked versions by:
- improved transmission in the UV and blue spectral range
- reduced autofluorescence of optical glass
- no or strongly reduced use of organic adhesives in the optical assembly
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo ML-2 microscope repair parts
- Lomo ML-2 luminescence microscope objective
- Lomo ML-2 Lumineszenz Mikroskopobjektiv
- Lomo ML-2 fluorescence microscope objective
- Lomo ML-2 Fluoreszenz Mikroskopobjektiv
- Lomo WI 40 0.75 L Lumineszenz Wasserimmersion Objektiv 1974
- Lomo WI 40x fluorescence water immersion objective
- Lomo Biolam 40x Objektiv Wasserimmersion
- Bresser Biolam WI 40 0.75 L Objektiv
- Carl Zeiss Jena Lumipan 40x water immersion objective
- LOMO WI 40 0.75 L 33 mm RMS objective
- ЛОМО WI 40 0.75 L объектив
- LOMO 40x Frontlinse zerkratzt - Ersatz
- objektiv LOMO WI 40x vodní imerze a Zeiss Jena
- objetivo LOMO WI 40 0.75 L inmersión en agua
- objetivo 40x para microscopio Lomo Biolam
- obiettivo LOMO WI 40 0.75 L ad immersione in acqua
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
ML-2
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 40x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives
-
If you don't like oil immersion but want better image quality than standard, dry 40x objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00869
|
Lomo WI 30x 0,90 L microscope objective (fluorescence water immersion, iris RMS 30x / 1974)
|
|
Description of this part for the microscope.
Microscope objective with RMS thread, 30x magnification, very high, variable numerical aperture, built-in iris diaphragm, designed for water immersion and improved
...
correction for fluorescence illumination.
Manufacturer: Lomo
Model: WI 30x0.90 L
Manufacturer code: O5V-30L
Magnification: 30x
Numerical aperture: variable from 0.65 to 0.90
Iris diaphragm: yes, built-in
Optical correction: achromat + fluorescence
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes, water
Cover glass: yes, 0.17 mm
Marking: "L" = luminescence
Thread: RMS
Year of manufacture: 1974
This is a rare, professional microscope objective with a very wide range of applications. Main features that make this objective exceptional:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (up to 0.90) provides high-resolution images
- Built-in iris diaphragm allows adjustment of the aperture
Despite the "L" marking, the objective can of course also be used with standard illumination.
LOMO objectives with the "L" luminescence marking differ from those without this symbol by:
- Improved transmission in the UV and blue spectral range
- Lower glass autofluorescence
- No or strongly reduced use of organic adhesives
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo ML-2 microscope repair parts
- Lomo ML-2 luminescence microscope objective
- Lomo ML-2 Lumineszenz Mikroskopobjektiv
- Lomo ML-2 fluorescence microscope objective
- Lomo ML-2 Fluoreszenz Mikroskopobjektiv
- Lomo 30x 0.90 Fluoreszenz Wasserimmersion Mikroskopobjektiv mit Irisblende
- Lomo 30x 0.90 fluorescence water immersion microscope objective iris diaphragm
- Lomo Biolam 30x Objektiv Wasserimmersion
- Bresser Biolam WI 30x 0.90 L Objektiv
- Carl Zeiss Jena Lumipan 30x water immersion objective
- LOMO WI 30x 0.90 L 33 mm RMS objective
- ЛОМО WI 30x 0.90 L объектив
- LOMO 30x Frontlinse zerkratzt - Ersatz
- objektiv LOMO WI 30x s irisovou clonou
- objetivo LOMO WI 30x 0.90 L inmersión en agua
- objetivo 30x para microscopio Lomo Biolam
- obiettivo LOMO WI 30x 0.90 L ad immersione in acqua
- obiettivo 30x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
ML-2
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 30x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives
-
If you don't like oil immersion but want better image quality than standard, dry 30x objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00868
|
Lomo Apo-WI 60x 1,0 D=0 L microscope objective (apochromat, fluorescence water immersion, no cover glass RMS 60x / 1975)
|
|
Description of this part for the microscope.
Apochromatic RMS microscope objective with 60x magnification, very high numerical aperture, designed for use without a cover slip, with water immersion and improved
...
correction for fluorescence illumination.
Manufacturer: Lomo
Model: APO-WI 60x1.0 D=0 L
Magnification: 60x
Numerical aperture: 1.0
Correction: Apochromat + fluorescence
Tube length: 160 mm (?)
Focal length: 33 mm (?)
Immersion: water
Cover slip: no (!)
Marking: "L" = luminescence
Marking: "D=0" = use without cover slip
Thread: RMS
Year of manufacture: 1975
Apochromatic objectives are known for exceptional color fidelity, significantly better than achromatic objectives.
This objective is extremely rare on the secondary market and highly professional. Key features:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (1.0) provides high-resolution images
- Use without cover slip allows, for example, direct placement of the objective inside a droplet with the sample to be observed
Despite the "L" marking, the objective can also be used with normal transmitted light illumination.
Lomo objectives marked "L" (luminescence) differ from those without this symbol by:
- Improved UV and blue light transmission
- Lower autofluorescence of the glass
- No or reduced use of organic adhesives in the optical assembly
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo ML-2 microscope repair parts
- Lomo ML-2 luminescence microscope objective
- Lomo ML-2 Lumineszenz Mikroskopobjektiv
- Lomo ML-2 fluorescence microscope objective
- Lomo ML-2 Fluoreszenz Mikroskopobjektiv
- Lomo Apo-WI 60x 1.0 Fluoreszenz Wasserimmersion Apochromat ohne Deckglas
- Lomo Apo-WI 60x 1.0 apochromat fluorescence water immersion objective
- Lomo Biolam 60x Objektiv Wasserimmersion
- Bresser Biolam Apo-WI 60x 1.0 D=0 L Objektiv
- Carl Zeiss Jena Lumipan 60x water immersion objective
- LOMO Apo-WI 60x 1.0 D=0 L 33 mm RMS objective
- ЛОМО Apo-WI 60x 1.0 D=0 L объектив
- LOMO 60x Frontlinse zerkratzt - Ersatz
- apochromatický objektiv LOMO Apo-WI 60x
- objetivo LOMO Apo-WI 60x 1.0 D=0 L inmersión en agua
- objetivo 60x para microscopio Lomo Biolam
- obiettivo LOMO Apo-WI 60x 1.0 D=0 L ad immersione in acqua
- obiettivo 60x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
199 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
ML-2
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need an apochromatic objective to obtain an image with better color
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 60x water immersion objective for Lomo, Carl Zeiss Jena, PZO, IOR or other microscopes requiring 33 mm and 160 mm objectives
-
...
-
If you need an objective to work without a cover slip but with water immersion (e.g. to observe inside a drop of water)
-
If you have a Lomo microscope from 1975 (serial number starts with "75") and want period-correct objectives
-
If you do not like oil immersion but want better image quality than standard 60x dry objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00821
|
Lomo 40 0,65 D=0 EPI microscope objective with M27 RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for EPI reflected and incident light - for work without a cover slip.
Excellent external condition and perfect optical condition.
...
It is not easy to find a used objective in this condition.
Manufacturer: Lomo
Magnification: 40x
Model: D=0 40 0.65
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 33 mm
Cover slip: no
Thread: RMS + adapter to M27 thread
Marking: "D=0" = work without cover slip
This is an objective for working with reflected light (but also transmitted light) without a cover slip.
Objective with RMS thread, but can be screwed into an adapter for M27 thread, allowing use in a microscope, e.g., Biolam-M. Of course, the objective can be unscrewed and another objective can be screwed into the adapter.
Info: M27 thread is also a standard used by Zeiss Axio microscopes. Therefore:
- this objective can be used in Axio microscopes with M27 thread
- this adapter can be used in Axio microscopes with another objective
This adapter is not a 3D-printed plastic part - it is a professional, metal, original product by Lomo.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam-M microscope repair parts
- Lomo Biolam-M Auflicht Mikroskopobjektiv
- Lomo Biolam-M microscope EPI objective
- Lomo Polam microscope objective
- Lomo Polam Mikroskop Objektiv
- Lomo 40 0.65 D=0 Auflicht Objektiv M27 RMS Adapter
- Lomo 40x EPI objective without cover glass 33 mm
- Lomo Metam 40x Auflicht Objektiv
- Lomo Lumam R1 / MIK-1 40x objective
- Lomo Biolam 40x reflected light objective
- LOMO 40x Frontlinse zerkratzt - Ersatz
- objektiv LOMO 40x pro dopadající světlo
- objetivo LOMO 40x luz reflejada
- objetivo para microscopio Lomo Biolam-M
- obiettivo LOMO 40x luce riflessa
- obiettivo per microscopio Lomo Biolam-M
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam-M
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope with EPI reflected light and you are missing an objective with this magnification
-
If you need a 40x objective for work without a cover glass for your microscope (for example a biological one)
-
...
-
If you want to use RMS-M27 adapters for your own objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99091
|
EMO Optik Wetzlar 75:1 0,82 microscope objective | dry RMS 75x Seibert Optik Wetzlar
|
|
Description of this part for the microscope.
A very rarely encountered microscope objective from EMO Optik Wetzlar, available on the secondary market.
Basic parameters:
Manufacturer: EMO Optik Wetzlar
...
(Arthur Seibert)
Model: 75:1 0.82
Correction: achromatic
Magnification: 75x
Aperture: N.A. 0.82
Thread: RMS
Parfocal length: 45 mm
Tube length: 170 mm (most likely)
Immersion: no | dry objective | air
The description states that the tube length is most likely 170 mm. Most objectives produced in the 1950s-1970s in the so-called "Wetzlar microscope center" followed a common 170 mm standard. The company "EMO Optik" was founded by Arthur Seibert, who was trained and worked at Leitz, which suggests the use of the 170 mm standard commonly used by Leitz at that time.
There is very little information available about microscopes manufactured by EMO Optik Wetzlar, therefore the exact microscope model from which this objective originates is unfortunately unknown.
Names, descriptions, terms, and search contexts under which this part is searched.
- EMO model microscope repair parts
- EMO Wetzlar Mikroskopobjektiv 75x
- EMO Optik Wetzlar 75x Mikroskop Objektiv
- EMO Wetzlar 75x microscope objective
- Arthur Seibert Optik Wetzlar 75x Objektiv
- EMO Optik Wetzlar 75:1 0.82 dry RMS objective
- Leitz SM 75x RMS Objektiv 170 mm
- Leitz Ortholux II / Orthoplan 75x objective
- EMO 75x Frontlinse zerkratzt - Ersatz
- objektiv 75x EMO Optik Wetzlar
- objetivo 75x EMO Optik Wetzlar
- objetivo 75x para microscopio Leitz SM
- obiettivo 75x EMO Optik Wetzlar
- obiettivo 75x per microscopio Leitz SM
- EMO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
EMO
EMO Optik Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
model
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(EMO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an EMO Wetzlar microscope and are completing it with original parts
-
if you have another microscope with a 170 mm tube length and want to use high-quality optics
-
...
-
if you are a collector and want to add such a rare item to your collection
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99140
|
Leitz Orthoplan - PLEZY 8 mm microscope objective Extender Adapter
|
|
Description of this part for the microscope.
The Leitz PLEZY is an extension adapter for RMS-thread microscope objectives that increases the parfocal focal length from 37 mm to 45 mm, making older objectives
...
compatible with microscopes designed for a 45 mm parfocal standard It is mounted between the objective and the nosepiece/revolver so that optical focus is maintained despite the additional mechanical extension.
Leitz PLEZY differs from extension adapters available on the market in that it features internal anti-reflective optics, ensuring that despite the mechanical extension of the focal length the image quality is not degraded.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz PLEZY RMS objective focal length adapter
- Leitz PLEZY Mikroskopobjektiv Verlängerungs-Adapter
- Wie verlängert man ein Mikroskopobjektiv?
- Can I mount a short Microscope objective to a microscope?
- Leitz PLEZY 8 mm Objektiv Verlängerung 37 auf 45 mm
- Leitz Orthoplan / Ortholux II objective extender 37 to 45 mm
- Carl Zeiss Jena Amplival / Ergaval 37 mm Objektiv auf 45 mm
- PZO Biolar short objective extension adapter
- prodlužovací adaptér objektivu Leitz PLEZY 8 mm
- adaptador extensor de objetivo Leitz PLEZY 37 a 45 mm
- adaptador para objetivos cortos microscopio PZO Biolar
- adattatore prolunga obiettivo Leitz PLEZY 37 a 45 mm
- adattatore per obiettivi corti microscopio PZO Biolar
- przedłużka obiektywu Leitz PLEZY 37 na 45 mm
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you want to use older microscope objectives (those with a length of 37 mm) on a newer microscope that requires objectives with a length of 45 mm
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99141
|
Lomo APO-WI-F 70x1,23 microscope objective | Apochromat, water immersion, phase contrast, cover glass correction collar, RMS 1972
|
|
Description of this part for the microscope.
Microscope objective with RMS thread with 70x magnification, very high numerical aperture, equipped with a correction ring for cover glass thickness, designed for water
...
immersion operation and with a phase contrast ring.
Manufacturer: Lomo
Model: APO-WI-F 70x1,23
Magnification: 70x
Numerical aperture: 1,23
Correction: Apochromat
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes - water
Cover glass: yes - thickness from 0.10 to 0.20 mm
Markings: APO = Apochromat, WI = water immersion, F = phase contrast
Thread: RMS
Year of production: 1972
Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653).
This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional:
- water immersion is preferred by many users over oil immersion
- very high numerical aperture, allowing the objective to produce a high resolution image
- cover glass thickness correction ring
Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness.
Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye".
Although this objective is a so-called "short" objective, meaning with a parfocal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a parfocal length of 45 mm.
The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MBB-1 microscope repair parts
- Lomo MBB-1A microscope objective
- Lomo Apochromat Mikroskopobjektiv
- Lomo water immersion microscope objective 70x
- Lomo Apochromatisches Mikroskopobjektiv
- Lomo 70x 1.23 water immersion microscope objective cover glass correction ring
- Lomo APO-WI-F 70x 1.23 Phasenkontrast Wasserimmersion
- Lomo Biolam 70x Apochromat Objektiv 33 mm
- Bresser Biolam APO 70x Objektiv
- Carl Zeiss Jena Lumipan / Nf 70x water immersion objective
- Leitz Orthoplan RMS apochromat 70x
- ЛОМО АПО-ВИ-Ф 70х объектив
- apochromatický objektiv LOMO APO-WI-F 70x a Zeiss Jena
- objetivo apocromático LOMO 70x inmersión en agua
- objetivo 70x para microscopio Lomo Biolam
- obiettivo apocromatico LOMO 70x ad immersione in acqua
- obiettivo 70x per microscopio Carl Zeiss Jena Lumipan
- obiektyw immersyjny wodny LOMO APO-WI-F 70x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
159 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MBB-1
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to upgrade your Lomo microscope with original parts
-
If you need a 70x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
-
...
-
If you have a Lomo microscope from 1972 (the serial number begins with "72") and want original-era objectives
-
If you don't like oil immersion but want better image quality than standard, dry 60x / 63x objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99161
|
Vickers 3 0.1 microscope objective 3x, RMS
|
|
Description of this part for the microscope.
Vickers (England) microscope objective.
Technical parameters:
Manufacturer: Vickers (England)
Magnification: 3x
Model: 3 0.1
Color correction:
...
Achromat
Numerical aperture: 0.1
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Vickers P/N: M022011
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.
Names, descriptions, terms, and search contexts under which this part is searched.
- Vickers Patholux microscope repair parts
- Vickers M15 Mikroskopobjektiv
- Vickers Patholux microscope objective 3x
- Vickers England Patholux Mikroskop Objektiv mit kleiner Vergrößerung
- Vickers 3 0.1 RMS Objektiv 45 mm
- Vickers 3x objective replacement
- objektiv Vickers 3x
- objetivo Vickers 3x RMS
- objetivo microscopio Vickers Patholux
- obiettivo Vickers 3x RMS
- obiettivo microscopio Vickers Patholux
- obiektyw mikroskopowy Vickers 3x
- Vickers buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Vickers
Vickers Instruments Ltd.
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Patholux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Vickers)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99148
|
Leitz Wetzlar Npl 40/0,65 170/0,17 microscope objective 40x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 40x
Color correction: NPL-achromat
Numerical aperture: 0.65
Tube length: 170 mm
Focal length: 45
...
mm
Cover glass: 0,17 mm
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Ortholux II microscope repair parts
- Leitz Orthoplan 40x microscope objective
- Leitz Wetzlar 40x Mikroskopobjektiv
- Leitz Ortholux NPlan Objektiv 40x
- Leitz Wetzlar NPl 40/0.65 170/0.17 Objektiv
- Leica NPl 40/0.65 170/0.17 N Plan objective 170 mm
- Leitz SM-LUX / SM 40x Objektiv 45 mm
- Meopta DD 37 BN 40x objective
- Leitz 40x Frontlinse zerkratzt - Ersatz
- objektiv Leitz NPl 40/0.65 170/0.17
- objetivo Leitz NPl 40/0.65 170/0.17
- objetivo 40x microscopio Leitz Orthoplan
- obiettivo Leitz NPl 40/0.65 170/0.17
- obiettivo 40x microscopio Leitz Orthoplan
- obiektyw planachromatyczny Leitz 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Ortholux II
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99149
|
Leitz Wetzlar Pl 40/0,65 170/0,17 microscope objective 40x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 40x
Color correction: Plan-achromat
Numerical aperture: 0.65
Tube length: 170 mm
Focal length:
...
45 mm
Cover glass: 0,17 mm
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Orthoplan 40x microscope objective
- Leitz Wetzlar 40x Mikroskopobjektiv
- Leitz Ortholux Plan Objektiv 40x
- Leitz Wetzlar Pl 40/0.65 170/0.17 Objektiv
- Leica Pl 40/0.65 170/0.17 plan achromat objective 170 mm
- Leitz SM-LUX / SM 40x Objektiv 45 mm
- Meopta DD 37 BN 40x objective
- Leitz 40x Frontlinse zerkratzt - Ersatz
- objektiv Leitz Pl 40/0.65 170/0.17
- objetivo Leitz Pl 40/0.65 170/0.17
- objetivo 40x microscopio Leitz Orthoplan
- obiettivo Leitz Pl 40/0.65 170/0.17
- obiettivo 40x microscopio Leitz Orthoplan
- obiektyw planachromatyczny Leitz 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a PLAN objective.
-
If you have a microscope without objectives and need to restock it using original parts
-
...
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99150
|
Leitz Wetzlar Pl Fl 10/0,30 170/- microscope objective 10x (Leica)
|
|
Description of this part for the microscope.
Parameters:
Manufacturer: Leitz Wetzlar
Magnification: 10x
Color correction: Plan-fluotar
Numerical aperture: 0.30
Tube length: 170 mm
Focal length: 45
...
mm
Cover glass: no
Immersion: no
Thread: RMS
Some information:
- Leitz objectives with a 170 mm tube are also very often used in Leitz microscope models designed for 160 mm tube objectives.
- Many other German manufacturers also produced microscopes with a TL=170 mm, and this objective can be used in them.
- Objectives with a parfocal length of 45 mm can also be used in microscopes that currently use 37 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Orthoplan microscope repair parts
- Leitz Orthoplan 10x microscope objective
- Leitz Wetzlar 10x Mikroskopobjektiv
- Leitz Ortholux Plan-Fluor Objektiv 10x
- Leitz Wetzlar Pl Fl 10/0.30 170/- Objektiv
- Leica Pl Fl 10/0.30 170/- plan fluorite objective 170 mm
- Leitz SM-LUX / SM 10x Objektiv 45 mm
- Meopta DD 37 BN 10x objective
- Leitz 10x Frontlinse zerkratzt - Ersatz
- objektiv Leitz Pl Fl 10/0.30 170/-
- objetivo Leitz Pl Fl 10/0.30 170/-
- objetivo 10x microscopio Leitz Orthoplan
- obiettivo Leitz Pl Fl 10/0.30 170/-
- obiettivo 10x microscopio Leitz Orthoplan
- obiektyw planfluorytowy Leitz 10x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
89 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Orthoplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you currently have an achromatic microscope objective and want to improve the image quality by replacing it with a Plan-Fluor objective.
-
If you have a microscope without objectives and need to restock it using original parts
-
...
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99286
|
Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 20/0.
...
40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0.40
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Interestingly, despite its 20x magnification, this microscope objective is marked as requiring no coverslip.
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 20x Objektiv für ein Mikroskop
- Kosmos Stuttgart 20x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 20x
- Kosmos Stuttgart 20/0.40 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 20x objective
- Hertel & Reuss Studio C 20x Objektiv 170 mm
- Kosmos 20x Frontlinse zerkratzt - Ersatz
- objektiv 20x Kosmos Stuttgart
- objetivo 20x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 20x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 20x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 20x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99287
|
Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 10/0.
...
30
Magnification: 10x
Correction: Achromat
Numerical Aperture: 0.30
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 10x Objektiv für ein Mikroskop
- Kosmos Stuttgart 10x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 10x
- Kosmos Stuttgart 10/0.30 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 10x objective
- Hertel & Reuss Studio C 10x Objektiv 170 mm
- Kosmos 10x Frontlinse zerkratzt - Ersatz
- objektiv 10x Kosmos Stuttgart
- objetivo 10x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 10x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 10x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 10x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99288
|
Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/- 30/0.
...
55
Magnification: 30x
Correction: Achromat
Numerical Aperture: 0.55
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: No
Immersion: No
Thread: RMS
Interestingly, despite its 30x magnification, this microscope objective is marked as requiring no coverslip.
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 30x Objektiv für ein Mikroskop
- Kosmos Stuttgart 30x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 30x
- Kosmos Stuttgart 30/0.55 170/- RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 30x objective
- Hertel & Reuss Studio C 30x Objektiv 170 mm
- Kosmos 30x Frontlinse zerkratzt - Ersatz
- objektiv 30x Kosmos Stuttgart
- objetivo 30x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 30x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 30x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good 30x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99289
|
Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm
|
|
Description of this part for the microscope.
Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar.
Specification:
Manufacturer: Kosmos Stuttgart (Will Wetzlar)
Model: 170/0.17 63/0.
...
85
Magnification: 63x
Correction: Achromat
Numerical Aperture: 0.85
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: Yes, 0.17 mm
Immersion: No (dry)
Thread: RMS
Objective lens of excellent optical quality.
Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China.
High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel.
Names, descriptions, terms, and search contexts under which this part is searched.
- Kosmos Binocular microscope repair parts
- Kosmos Stuttgart 63x Objektiv für ein Mikroskop
- Kosmos Stuttgart 63x microscope objective
- Kosmos Humboldt Mikroskop Objektiv 63x
- Kosmos Stuttgart 63/0.85 170/0.17 RMS Objektiv 37 mm
- Kosmos Modell C / Binocular 63x objective
- Hertel & Reuss Studio C 63x Objektiv 170 mm
- Kosmos 63x Frontlinse zerkratzt - Ersatz
- objektiv 63x Kosmos Stuttgart
- objetivo 63x Kosmos Stuttgart 170 mm
- objetivo microscopio Kosmos Humboldt
- obiettivo 63x Kosmos Stuttgart 170 mm
- obiettivo microscopio Kosmos Humboldt
- obiektyw mikroskopowy Kosmos Stuttgart 63x
- Kosmos buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Kosmos
Kosmos Stuttgart
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Binocular
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Kosmos)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a Kosmos microscope without objectives and need to upgrade it using original parts
-
If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have such an objective lens on hand
-
If you're looking for a very good dry 63x objective lens for your microscope from another manufacturer
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99297
|
PZO 20:1 0,40 microscope objective 20x
|
|
Description of this part for the microscope.
PZO microscope objective.
Manufacturer: PZO Poland
Model: 20:1 0,40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160
...
mm
Focal Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MB-10 microscope repair parts
- obiektyw do starszego mikroskopu PZO
- PZO 20:1 0.40 RMS Objektiv 33 mm
- PZO vintage 20x microscope objective 33 mm
- Lomo MBB-1 20x Mikroskopobjektiv
- Carl Zeiss Jena Lumipan 20x Mikroskop Objektiv
- Lomo Biolam 20x microscope objective
- Bresser Biolam 20x Objektiv
- PZO M-440 / MB-10 20x objective
- PZO 20x Objektiv Pilz - Ersatz
- objektiv PZO 20x a Zeiss Jena
- objetivo PZO 20x para microscopio Lomo Biolam
- objetivo 20x para microscopio Carl Zeiss Jena Lumipan
- obiettivo PZO 20x per microscopio Carl Zeiss Jena Lumipan
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MB-10
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00779
|
Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x
|
|
Description of this part for the microscope.
Carl Zeiss (Germany) microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss (Germany)
Magnification: 2,5x
Model: Plan 2,5/0,
...
08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.
Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.
A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan 2.5/0.08 160/- Mikroskopobjektiv
- Carl Zeiss Standard GFL microscope objective 2.5x
- Carl Zeiss Universal Mikroskop Objektiv mit kleiner Vergrößerung
- Carl Zeiss Phomi Weitfeld Mikroskopobjektiv 2.5x
- Zeiss Großfeld Mikroskopobjektiv für Pathologie
- Zeiss Übersichtsobjektiv 2.5x
- obiektyw mikroskopowy do obserwacji owadów
- Zeiss Plan 2.5x Objektiv für Insektenuntersuchung
- Carl Zeiss Jena Amplival / Ergaval 2.5x objective 45 mm
- objektiv Zeiss Plan 2.5x
- objetivo Zeiss Plan 2.5x panorámico
- objetivo 2.5x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 2.5x panoramico
- obiettivo 2.5x per microscopio Carl Zeiss Jena Ergaval
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99318
|
Vickers 40/0,65 microscope objective 40x, RMS
|
|
Description of this part for the microscope.
Vickers (England) microscope objective.
Technical parameters:
Manufacturer: Vickers (England)
Magnification: 40x
Model: 40/0,65
Color correction:
...
Achromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,18 mm (!)
Immersion: no
Thread: RMS
Vickers P/N: M022511
Names, descriptions, terms, and search contexts under which this part is searched.
- Vickers Patholux microscope repair parts
- Vickers M15 Mikroskopobjektiv 40x
- Vickers Patholux microscope objective 40x
- Vickers England Patholux Mikroskopobjektiv
- Vickers 40/0.65 RMS Objektiv 45 mm
- Vickers Patholette / M72 / M70 40x objective
- Vickers 40x Frontlinse zerkratzt - Ersatz
- objektiv Vickers 40x
- objetivo Vickers 40x RMS
- objetivo microscopio Vickers Patholux
- obiettivo Vickers 40x RMS
- obiettivo microscopio Vickers Patholux
- obiektyw mikroskopowy Vickers 40x
- Vickers buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Vickers
Vickers Instruments Ltd.
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Patholux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Vickers)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99319
|
Vickers 100/1,3 Oil microscope objective 100x, RMS
|
|
Description of this part for the microscope.
Vickers (England) microscope objective.
Technical parameters:
Manufacturer: Vickers (England)
Magnification: 100x
Model: 100/1,3 Oil
Color correction:
...
Achromat
Numerical aperture: 1,3
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,18 mm (!)
Immersion: yes, oil
Thread: RMS
Vickers P/N: M022611
Names, descriptions, terms, and search contexts under which this part is searched.
- Vickers Patholux microscope repair parts
- Vickers M15 Mikroskopobjektiv 100x
- Vickers Patholux microscope objective 100x
- Vickers England Patholux Mikroskopobjektiv Öl
- Vickers 100/1.3 Oil RMS Objektiv 45 mm
- Vickers Patholette / M72 / M70 100x objective
- Vickers 100x Frontlinse zerkratzt - Ersatz
- objektiv Vickers 100x
- objetivo Vickers 100x RMS
- objetivo microscopio Vickers Patholux
- obiettivo Vickers 100x RMS
- obiettivo microscopio Vickers Patholux
- obiektyw mikroskopowy Vickers 100x
- Vickers buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Vickers
Vickers Instruments Ltd.
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Patholux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Vickers)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99312
|
Carl Zeiss Jena Lumipan / Lg 20/0,40 160/0,17 microscope objective 20x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: 20/0,40 160/0,17
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal
...
Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lumipan microscope repair parts
- Carl Zeiss Jena Lumipan microscope objective 20x
- Carl Zeiss Jena Lumipan Mikroskopobjektiv 20x
- Lomo Biolam 20x Mikroskopobjektiv
- Carl Zeiss Jena L-Stativ Objektiv 20x
- Carl Zeiss Jena Lg Mikroskopobjektiv 20x
- Carl Zeiss Jena 20/0.40 160/0.17 Objektiv 33 mm
- Bresser Biolam 20x Objektiv
- Carl Zeiss Jena Nf 20x objective short 33 mm
- Carl Zeiss Jena 20x Objektiv Pilz - Ersatz
- objektiv 20x Carl Zeiss Jena Lumipan
- objetivo 20x Carl Zeiss Jena Lumipan
- objetivo 20x para microscopio Lomo Biolam
- obiettivo 20x Carl Zeiss Jena Lumipan
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Carl Zeiss Jena Lumipan 20x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lumipan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99323
|
Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss West Germany
Model: Ph2 40 0,65
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal
...
Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Universal microscope repair parts
- Carl Zeiss Standard GFL Ph2 Phasenkontrast Mikroskopobjektiv 40x
- Carl Zeiss 40x phase contrast microscope objective Ph2
- Zeiss Universal / Phomi Ph2 40 0.65 Objektiv
- Carl Zeiss Photomikroskop Ph2 Phasenkontrast Objektiv
- Zeiss Standard WL Ph2 40x objective 45 mm
- Carl Zeiss Jena Nf Ph2 phase objective 40x
- PZO Biolar Phasenkontrast Objektiv 40x Zeiss
- objektiv fázový kontrast Zeiss Ph2 40x
- objetivo contraste de fases Zeiss Ph2 40x
- objetivo Ph2 40x para microscopio PZO Biolar
- obiettivo contrasto di fase Zeiss Ph2 40x
- obiettivo Ph2 40x per microscopio PZO Biolar
- obiektyw fazowy Zeiss Ph2 40x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Universal
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99324
|
Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss West Germany
Model: Ph3 100 1,25 Oel
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,25
Tube Length: 160
...
mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Universal microscope repair parts
- Carl Zeiss Standard GFL Ph3 Phasenkontrast Mikroskopobjektiv 100x
- Carl Zeiss 100x phase contrast microscope objective Ph3
- Zeiss Universal / Phomi Ph3 100 1.25 Oel Objektiv Öl
- Carl Zeiss Photomikroskop Ph3 Phasenkontrast Objektiv
- Zeiss Standard WL Ph3 100x objective 45 mm
- Carl Zeiss Jena Nf Ph3 phase objective 100x
- PZO Biolar Phasenkontrast Objektiv 100x Zeiss
- objektiv fázový kontrast Zeiss Ph3 100x
- objetivo contraste de fases Zeiss Ph3 100x
- objetivo Ph3 100x para microscopio PZO Biolar
- obiettivo contrasto di fase Zeiss Ph3 100x
- obiettivo Ph3 100x per microscopio PZO Biolar
- obiektyw fazowy Zeiss Ph3 100x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Universal
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99330
|
Leitz Wetzlar PHACO2 40/0.65 160/0,17 phase contrast microscope objective 40x PN 519759
|
|
Description of this part for the microscope.
Microscope objective RMS by Leitz Wetzlar (Leica) for phase contrast.
Basic parameters:
Manufacturer: Leitz Wetzlar Germany
Model: PHACO2 160/0,17 40/0,
...
65
Leitz P/N: 519759
Magnification: 40x
Numerical aperture: 0.65
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no (dry, air)
Info: phase contrast PHACO 2
The same objective model was also sold under the name "Leica" instead of "Leitz" on the housing, so these are in fact identical objectives. This objective also fits Will Wetzlar microscopes.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz HM-LUX 3 microscope repair parts
- Leitz Wetzlar 40x phase contrast objective
- Leica 40x phase contrast microscope objective
- Leitz Mikroskop 40x Phasenkontrast Mikroskopobjektiv
- Leitz PHACO 2 40/0.65 160/0.17 Objektiv 519759
- Leitz HM-LUX 3 / Laborlux S Phaco 2 objective 40x
- Leitz Orthoplan / Diaplan Phasenkontrast 40x
- Leitz Phaco 40x Frontlinse zerkratzt - Ersatz
- objektiv fázový kontrast Leitz Phaco 2 40x
- objetivo contraste de fases Leitz Phaco 2 40x
- objetivo Leitz 519759
- obiettivo contrasto di fase Leitz Phaco 2 40x
- obiettivo Leitz 519759
- obiektyw fazowy Leitz Phaco 2 40x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
HM-LUX 3
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope lacks a 40x phase contrast objective
-
if you have a 40x PHACO2 objective damaged or in poor condition
-
if you have a microscope from any manufacturer that supports TL=160 FL=45 objectives, this is also a lens for you
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99335
|
PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x
|
|
Description of this part for the microscope.
Polarization-interference microscope objective by PZO
Basic parameters:
Manufacturer: PZO Poland
Model: 10/0,24 PI 160/-
Magnification:
...
10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).
Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).
VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.
Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.
It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO Biolar DIC microscope repair parts
- PZO Biolar DIC PI Polarisation-Interferenz Mikroskopobjektiv
- PZO UPI Pluta polarisation interference microscope objective
- obiektyw PZO polaryzacyjno-interferencyjny
- PZO Biolar DIC 10/0.24 PI 160/- Objektiv
- PZO Biolar DIK 10x Objektiv 45 mm
- Carl Zeiss Jena Nf DIC Pluta 10x objective
- Olympus CH-2 DIC objective PZO
- objektiv PZO Biolar PI 10x
- objetivo de interferencia PZO Biolar PI 10x
- objetivo DIC Pluta para microscopio PZO Biolar
- obiettivo a interferenza PZO Biolar PI 10x
- obiettivo DIC Pluta per microscopio PZO Biolar
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
69 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolar DIC
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it
-
if you need a polarization-interference objective for your own purposes
-
...
-
if you have such an objective but it is of very poor quality or damaged
-
if you want to keep such an objective as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99365
|
Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 3,2x
Model: Planachromat 3,2/0,
...
10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.
Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.
A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 3.2x
- Carl Zeiss Jena Amplival microscope objective 3.2x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 3.2x
- Carl Zeiss Jena Planachromat 3.2/0.10 160/- Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 3.2x
- Carl Zeiss Jena Übersichtsobjektiv für Pathologie
- Carl Zeiss Jena 3.2x objective for insects
- Carl Zeiss Jena 3.2x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 3.2x
- objetivo Carl Zeiss Jena Planachromat 3.2x
- objetivo 3.2x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 3.2x
- obiettivo 3.2x per microscopio PZO Biolar
- obiektyw mikroskopowy do obserwacji owadów Carl Zeiss Jena 3.2x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99366
|
Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 10x
Model: Planachromat 10/0,25 160/-
...
Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 10x
- Carl Zeiss Jena Amplival microscope objective 10x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 10x
- Carl Zeiss Jena Planachromat 10/0.25 160/- Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 10x
- Lomo Biolam plan Mikroskopobjektiv 10x
- Carl Zeiss Jena 10x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 10x
- objetivo Carl Zeiss Jena Planachromat 10x
- objetivo 10x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 10x
- obiettivo 10x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 10x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99367
|
Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 16x
Model: Planachromat 16/0,32 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 16x
- Carl Zeiss Jena Amplival microscope objective 16x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 16x
- Carl Zeiss Jena Planachromat 16/0.32 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 16x
- Lomo Biolam plan Mikroskopobjektiv 16x
- Carl Zeiss Jena 16x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 16x
- objetivo Carl Zeiss Jena Planachromat 16x
- objetivo 16x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 16x
- obiettivo 16x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 16x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99368
|
Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 40x
Model: Planachromat 40/0,65 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 40x
- Carl Zeiss Jena Amplival microscope objective 40x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 40x
- Carl Zeiss Jena Planachromat 40/0.65 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 40x
- Lomo Biolam plan Mikroskopobjektiv 40x
- Carl Zeiss Jena 40x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 40x
- objetivo Carl Zeiss Jena Planachromat 40x
- objetivo 40x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 40x
- obiettivo 40x per microscopio PZO Biolar
- obiektyw Planachromat do mikroskopu PZO Biolar 40x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99369
|
Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x
|
|
Description of this part for the microscope.
Carl Zeiss Jena microscope objective.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 100x
Model: Planachromat HI 100/1,25 160/0,
...
17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Planachromat Mikroskopobjektiv 100x
- Carl Zeiss Jena Amplival microscope objective 100x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv 100x
- Carl Zeiss Jena Planachromat HI 100/1.25 160/0.17 Objektiv 45 mm
- Carl Zeiss Jena Nf / Docuval planachromat 100x
- Carl Zeiss Jena 100x Ölimmersion Objektiv
- Carl Zeiss Jena 100x Objektiv Pilz - Ersatz
- objektiv Carl Zeiss Jena Planachromat 100x
- objetivo Carl Zeiss Jena Planachromat 100x
- objetivo 100x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Planachromat 100x
- obiettivo 100x per microscopio PZO Biolar
- obiektyw immersyjny Planachromat Carl Zeiss Jena 100x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99370
|
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography
|
|
Description of this part for the microscope.
Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6.
...
3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This is one of the most commonly used microscope objectives for macro photography and focus stacking.
Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Semiplan Mikroskopobjektiv 6.3x
- Carl Zeiss Jena Amplival microscope objective 6.3x
- Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
- obiektyw mikroskopowy do fotografowania owadów
- Carl Zeiss Jena Semiplan Objektiv für Insekten-Makrofotografie
- Carl Zeiss Jena Semiplan 6.3/0.16 160/- Balgengerät
- objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
- objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
- objetivo 6.3x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
- obiettivo 6.3x per microscopio PZO Biolar
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
169 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need a microscope objective for macro photography
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99361
|
Carl Zeiss Jena Jenaval / Jenamed microscope GF-Planachromat 3,2x/0,06 objective, infinity, M25-thread
|
|
Description of this part for the microscope.
Microscope objective from Carl Zeiss Jena.
Basic parameters of the objective:
Manufacturer: Carl Zeiss Jena
Model: GF-Planachromat 3.2x/0.
...
06 oo/-A
Magnification: 3.2x
Numerical aperture N.A.: 0.006
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: not required, may be present or not
Immersion: no
This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2
The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.
An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenaval microscope repair parts
- Carl Zeiss Jena GF-Planachromat microscope objective
- microscope objective for Jenamed and Jenaval microscope
- Zeiss Jena Jenalab and Jenalumar infinity microscope objective
- M25 thread Zeiss microscope objective
- Carl Zeiss Jena GF-Planachromat Mikroskopobjektiv
- Mikroskop Objektiv für Jenamed und Jenaval Mikroskope
- Zeiss Jena Jenalab und Jenalumar unendlich Mikroskop Objektiv
- M25-Gewinde Zeiss Mikroskopobjektiv
- Carl Zeiss Jena GF-Planachromat 3.2x/0.06 Objektiv M25
- Carl Zeiss Jena GF-Planachromat 3.2x infinity objective Jenamed
- Jenamed GF-Planachromat 3.2x Frontlinse zerkratzt - Ersatz
- objektiv Carl Zeiss Jena GF-Planachromat 3.2x
- objetivo Carl Zeiss Jena GF-Planachromat 3.2x M25
- objetivo infinito microscopio Jenamed
- obiettivo Carl Zeiss Jena GF-Planachromat 3.2x M25
- obiettivo infinito microscopio Jenamed
- obiektyw Carl Zeiss Jena GF-Planachromat 3.2x M25
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenaval
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a microscope missing an objective with this magnification
-
if you have an achromatic or planachromatic objective and want to upgrade your microscope to a wide field objective
-
...
-
if you already have such an objective but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99362
|
Carl Zeiss Jena Jenaval / Jenamed microscope GF-Planachromat 12,5x/0,25 objective, infinity, M25-thread
|
|
Description of this part for the microscope.
Microscope objective from Carl Zeiss Jena.
Basic parameters of the objective:
Manufacturer: Carl Zeiss Jena
Model: GF-Planachromat 12,5x/0,
...
25 oo/-A
Magnification: 12,5x
Numerical aperture N.A.: 0.25
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: not required, may be present or not
Immersion: no
This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2
The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.
An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenaval microscope repair parts
- Carl Zeiss Jena GF-Planachromat microscope objective
- microscope objective for Jenamed and Jenaval microscope
- Zeiss Jena Jenalab and Jenalumar infinity microscope objective
- M25 thread Zeiss microscope objective
- Carl Zeiss Jena GF-Planachromat Mikroskopobjektiv
- Mikroskop Objektiv für Jenamed und Jenaval Mikroskope
- Zeiss Jena Jenalab und Jenalumar unendlich Mikroskop Objektiv
- M25-Gewinde Zeiss Mikroskopobjektiv
- Carl Zeiss Jena GF-Planachromat 12.5x/0.25 Objektiv M25
- Carl Zeiss Jena GF-Planachromat 12.5x infinity objective Jenamed
- Jenamed GF-Planachromat 12.5x Frontlinse zerkratzt - Ersatz
- objektiv Carl Zeiss Jena GF-Planachromat 12.5x
- objetivo Carl Zeiss Jena GF-Planachromat 12.5x M25
- objetivo infinito microscopio Jenamed
- obiettivo Carl Zeiss Jena GF-Planachromat 12.5x M25
- obiettivo infinito microscopio Jenamed
- obiektyw Carl Zeiss Jena GF-Planachromat 12.5x M25
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenaval
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a microscope missing an objective with this magnification
-
if you have an achromatic or planachromatic objective and want to upgrade your microscope to a wide field objective
-
...
-
if you already have such an objective but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99363
|
Carl Zeiss Jena Jenaval / Jenamed microscope GF-Planachromat 25x/0,50 oo/0,17-A objective, infinity, M25-thread
|
|
Description of this part for the microscope.
Microscope objective from Carl Zeiss Jena.
Basic parameters of the objective:
Manufacturer: Carl Zeiss Jena
Model: GF-Planachromat 25x/0,50 oo/0,
...
17-A
Magnification: 25x
Numerical aperture N.A.: 0.50
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: yes, 0,17 mm
Immersion: no
This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2
The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.
An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenaval microscope repair parts
- Carl Zeiss Jena GF-Planachromat microscope objective
- microscope objective for Jenamed and Jenaval microscope
- Zeiss Jena Jenalab and Jenalumar infinity microscope objective
- M25 thread Zeiss microscope objective
- Carl Zeiss Jena GF-Planachromat Mikroskopobjektiv
- Mikroskop Objektiv für Jenamed und Jenaval Mikroskope
- Zeiss Jena Jenalab und Jenalumar unendlich Mikroskop Objektiv
- M25-Gewinde Zeiss Mikroskopobjektiv
- Carl Zeiss Jena GF-Planachromat 25x/0.50 oo/0.17-A Objektiv M25
- Carl Zeiss Jena GF-Planachromat 25x infinity objective Jenamed
- Jenamed GF-Planachromat 25x Frontlinse zerkratzt - Ersatz
- objektiv Carl Zeiss Jena GF-Planachromat 25x
- objetivo Carl Zeiss Jena GF-Planachromat 25x M25
- objetivo infinito microscopio Jenamed
- obiettivo Carl Zeiss Jena GF-Planachromat 25x M25
- obiettivo infinito microscopio Jenamed
- obiektyw Carl Zeiss Jena GF-Planachromat 25x M25
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenaval
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a microscope missing an objective with this magnification
-
if you have an achromatic or planachromatic objective and want to upgrade your microscope to a wide field objective
-
...
-
if you already have such an objective but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99364
|
Carl Zeiss Jena Jenaval / Jenamed microscope GF-Planachromat 40x/0.65 oo/0,17-A objective, infinity, M25-thread
|
|
Description of this part for the microscope.
Microscope objective from Carl Zeiss Jena.
Basic parameters of the objective:
Manufacturer: Carl Zeiss Jena
Model: GF-Planachromat 40x/0.65 oo/0,
...
17-A
Magnification: 40x
Numerical aperture N.A.: 0.65
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: yes, 0,17 mm
Immersion: no
This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2
The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.
An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenaval microscope repair parts
- Carl Zeiss Jena GF-Planachromat microscope objective
- microscope objective for Jenamed and Jenaval microscope
- Zeiss Jena Jenalab and Jenalumar infinity microscope objective
- M25 thread Zeiss microscope objective
- Carl Zeiss Jena GF-Planachromat Mikroskopobjektiv
- Mikroskop Objektiv für Jenamed und Jenaval Mikroskope
- Zeiss Jena Jenalab und Jenalumar unendlich Mikroskop Objektiv
- M25-Gewinde Zeiss Mikroskopobjektiv
- Carl Zeiss Jena GF-Planachromat 40x/0.65 oo/0.17-A Objektiv M25
- Carl Zeiss Jena GF-Planachromat 40x infinity objective Jenamed
- Jenamed GF-Planachromat 40x Frontlinse zerkratzt - Ersatz
- objektiv Carl Zeiss Jena GF-Planachromat 40x
- objetivo Carl Zeiss Jena GF-Planachromat 40x M25
- objetivo infinito microscopio Jenamed
- obiettivo Carl Zeiss Jena GF-Planachromat 40x M25
- obiettivo infinito microscopio Jenamed
- obiektyw Carl Zeiss Jena GF-Planachromat 40x M25
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenaval
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a microscope missing an objective with this magnification
-
if you have an achromatic or planachromatic objective and want to upgrade your microscope to a wide field objective
-
...
-
if you already have such an objective but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99386
|
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization
This is an objective designed for transmitted light work with a cover glass.
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Lomo 20 0.40 P Pol Objektiv mit Adapter
- Lomo 20x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 20x 33 mm
- ЛОМО 20 0.40 П объектив
- polarizační objektiv Lomo 20x
- objetivo de polarización Lomo 20x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 20x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 20x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a polarisation microscope and need an objective lens with this magnification
-
If you only need a slider to use with other objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99387
|
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Super-Macro-Photo objective
- 9:1 Makroobjektiv
- Lomo Plan 9x 0.20 P Pol Objektiv mit Adapter
- Lomo 9x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 9x 33 mm
- Lomo Plan 9x Makroobjektiv Focus Stacking
- ЛОМО Plan 9x 0.20 П объектив
- polarizační objektiv Lomo 9x
- objetivo de polarización Lomo 9x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 9x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 9x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99385
|
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Super-Macro-Photo objective
- 3.7:1 Makroobjektiv
- Lomo 3.7 0.11 P Pol Objektiv mit Adapter
- Lomo 3.7x polarizing objective with Pol RMS adapter
- Lomo Polam / MIN-6 Pol objective 3.7x 33 mm
- Lomo 3.7x Makroobjektiv Focus Stacking
- ЛОМО 3.7 0.11 П объектив
- polarizační objektiv Lomo 3.7x
- objetivo de polarización Lomo 3.7x
- objetivo Pol para microscopio Carl Zeiss Jena Lumipan
- obiettivo polarizzazione Lomo 3.7x
- obiettivo Pol per microscopio Carl Zeiss Jena Lumipan
- obiektyw polaryzacyjny Lomo 3.7x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99438
|
PZO 5/0.15 microscope objective 5x for macro photography | for Carl Zeiss Jena and Lomo Biolam
|
|
Description of this part for the microscope.
PZO microscope objective 5/0.15 - a model used in microscopes, but also very often used for macro photography.
Basic technical parameters:
- Manufacturer: PZO
...
Poland
- Model: 5/0.15 160/-
- Alternative model marking: 5/0.15 160/0
- Magnification: 5x
- Numerical aperture N.A.: 0.15
- Correction: achromatic
- Focal length FL: 33 mm
- Tube length: 160 mm
- Cover glass: not required, but may be used
- Immersion: no (dry objective)
- Thread: RMS
This model has a metal housing with no lens at its end. Additionally, this housing can be unscrewed without affecting the operation of the objective - resulting in a relatively large working distance of more than 20 mm.
Three features:
- large working distance exceeding 20 mm
- exceptionally high numerical aperture N.A. of 0.15
- achromatic correction allowing direct projection use
make this relatively uncommon model very frequently chosen for macro photography using a microscope objective connected to a camera (focus stacking).
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Lomo Biolam
- Lomo MBB-1A
- Carl Zeiss Jena LG / Lu / Lumipan
- Carl Zeiss Jena Nf
- Olympus CH
Note! Please note that the FL = 33 mm focal length means that this objective DOES NOT FIT the following microscopes:
- PZO Biolar
- PZO Studar
Early versions of this objective (with low serial numbers) have the engraved marking 5/0.15 160/0 suggesting that the objective is intended for use without a cover glass. This is true, but more precisely this objective can work both without a cover glass and with one. In newer versions the engraving already reads 5/0.15 160/- where this "minus" already means "indifferent".
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MS-16 microscope repair parts
- PZO 5x microscope objective
- PZO Poland 5x Mikroskopobjektiv
- super macro photo stacking
- PZO 5/0.15 Objektiv Makrofotografie Focus Stacking
- PZO 5x objective for Carl Zeiss Jena Lumipan / Lg
- Lomo Biolam 5x Objektiv PZO
- PZO MS-16 5x objective
- objektiv PZO 5x pro makrofotografii
- objetivo PZO 5x para macrofotografía
- objetivo 5x para microscopio Carl Zeiss Jena Lumipan
- obiettivo PZO 5x per macrofotografia
- obiettivo 5x per microscopio Carl Zeiss Jena Lumipan
- obiektyw PZO 5x do makrofotografii
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
5
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
35 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MS-16
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need a high resolution objective for macro photography
-
if you need a 5x microscope objective with high numerical aperture
-
when you need a good quality 5x objective for an inverted microscope
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99442
|
Carl Zeiss Jena Lumipan / Lg 40 0,65 0,17 microscope objective 40x
|
|
Description of this part for the microscope.
Manufacturer: Carl Zeiss Jena
Model: 40 0,65 0,17
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal Length: 33
...
mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Lomo Biolam
- Lomo MBB-1A
- PZO MB-10
- Olympus CH
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Lumipan microscope repair parts
- Carl Zeiss Jena Lumipan microscope objective
- Carl Zeiss Jena Lumipan Mikroskopobjektiv
- Lomo Biolam 40x Mikroskopobjektiv
- Carl Zeiss Jena Lg Mikroskopobjektiv
- Carl Zeiss Jena 40/0.65 0.17 Objektiv 33 mm
- Bresser Biolam 40x Objektiv
- Carl Zeiss Jena Nf 40x short objective 33 mm
- Carl Zeiss Jena 40x Frontlinse zerkratzt - Ersatz
- objektiv 40x Carl Zeiss Jena Lumipan
- objetivo 40x Carl Zeiss Jena Lumipan
- objetivo 40x para microscopio Lomo Biolam
- obiettivo 40x Carl Zeiss Jena Lumipan
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Carl Zeiss Jena Lumipan 40x
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
20 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Lumipan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99354
|
Olympus CH 40 0,65 0,17 microscope objective 40x, also for Carl Zeiss Jena
|
|
Description of this part for the microscope.
Manufacturer: Olympus Tokyo
Model: 40 0,65 0,17 Japan
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0,65
Tube Length: 160 mm
Focal
...
Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Carl Zeiss Jena Lg
- Carl Zeiss Jena Lumipan
- Lomo Biolam
- Lomo MBB-1A
- PZO MB-10
- Nikon S
- Olympus KHC
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus CH microscope repair parts
- Olympus CH Mikroskopobjektiv
- Nikon S microscope objective
- Carl Zeiss Jena Lumipan microscope objective
- Carl Zeiss Jena Lumipan Mikroskopobjektiv
- Lomo Biolam 40x Mikroskopobjektiv
- Carl Zeiss Jena Lg Mikroskopobjektiv
- Olympus KHC Mikroskop Objektiv
- Olympus CH 40/0.65 0.17 Objektiv 33 mm
- Olympus CH 40x short barrel objective
- Olympus KHC / Nikon S 40x Objektiv
- Olympus CH 40x Frontlinse zerkratzt - Ersatz
- objektiv Olympus CH 40x
- objetivo Olympus CH 40x
- objetivo 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo Olympus CH 40x
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Olympus CH 40x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
CH
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99047
|
Carl Zeiss Jena NU / Amplival M19 Planachromat 25x/0,50 oo/0,17 microscope objective
|
|
Description of this part for the microscope.
Biological microscope objective Carl Zeiss Jena Planachromat 25x with M19 thread for infinity-corrected systems.
Basic parameters:
- Element: biological
...
microscope objective
- Manufacturer: Carl Zeiss Jena
- Designation: Planachromat 25x/0,50 oo/0,17
- Magnification: 25x
- Numerical aperture N.A.: 0,50
- Optical correction: infinity-corrected tube length
- Optical correction class: planachromat
- Cover glass: yes, 0.17 mm
- Thread: M19
Some facts about Carl Zeiss Jena objectives with M19 thread (CZJ M19) and their compatibility with various microscopes from this manufacturer:
- these objectives are most commonly used for technical applications rather than biological applications, therefore most objectives available on the secondary market are intended for use without a cover glass (designation oo/0)
- CZJ M19 objectives intended for biological applications (designation oo/0,17) are most commonly used on Carl Zeiss Jena NU / NU2 microscopes
- in Carl Zeiss Jena Nf and Lumipan microscopes, CZJ M19 objectives are used together with an EPI illuminator
- CZJ M19 objectives can be used in Carl Zeiss Jena Polmi-A microscopes, but they provide a different magnification than the nominal value
- Carl Zeiss Jena Amplival / Amplival Pol / Amplival Interphako / Peraval microscopes feature interchangeable nosepieces, and a dedicated nosepiece for M19-thread objectives was also produced for these microscopes
- Carl Zeiss Jena Metaval and Neophot microscopes use newer versions of CZJ M19 objectives (with a coarse-knurled edge and shiny housing), although many users still experiment with older M19 objectives on these microscopes
- Carl Zeiss Jena Epignost and BK 70x50 microscopes were produced in various versions with completely different configurations - and some of them operate with CZJ M19 objectives
- Carl Zeiss Jena Vertival / Epival / Nf / BK 70x50 microscopes often allow the use of CZJ M19 objectives in EPI dark-field mode
- on the Carl Zeiss Jena Epityp-2 inverted metallurgical microscope, many users employ biological objectives designed for use with a cover glass, placing the microscope slide "upside down", with the cover glass facing downward toward the objective.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena NU microscope repair parts
- Carl Zeiss Jena infinity microscope objective
- Carl Zeiss Jena M19 thread microscope objective
- Carl Zeiss Jena M19 Gewinde Mikroskopobjektiv
- Zeiss Jena Mikroskopobjektiv für unendlich korrigierte biologische Systeme
- Carl Zeiss Jena Planachromat 25x/0.50 oo M19 Objektiv
- Carl Zeiss Jena NU / Amplival M19 25x infinity objective
- objektiv Carl Zeiss Jena Planachromat 25x M19
- objetivo Carl Zeiss Jena Planachromat 25x M19
- objetivo para microscopio Carl Zeiss Jena Amplival
- obiettivo Carl Zeiss Jena Planachromat 25x M19
- obiettivo per microscopio Carl Zeiss Jena Amplival
- obiektyw Carl Zeiss Jena Planachromat 25x M19
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
NU
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you need an objective with this magnification for one of the microscopes with which it is compatible (additional information can be found in the description)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99483
|
Leitz Wetzlar 45/0,65 170/0,17 RMS microscope objective (45x Leica)
|
|
Description of this part for the microscope.
Leitz Wetzlar microscope objective.
Manufacturer: Leitz Wetzlar
Magnification: 45x
Color correction: achromat
Numerical aperture: 0.65
Tube length:
...
170 mm
Focal length: 37 mm
Cover glass: yes, 0.17 mm
Immersion: no
Thread: RMS
This objective was removed from a Leitz Dialux microscope, but it is compatible with most Leitz Wetzlar microscopes manufactured approximately before 1980 (SM, SM-Lux, Dialux, Ortholux, Orthoplan, etc.).
Some useful information about Leitz Wetzlar objectives with TL=170 mm and FL=37 mm:
- most Leitz microscopes manufactured approximately before 1980 support both 160 mm and 170 mm tube length objectives
- many Leitz microscopes support both 37 mm and 45 mm parfocal length objectives
- by adding an RMS-8mm adapter, such an objective obtains a parfocal length of 45 mm. Leitz manufactured such adapters under the name "Plezzy" - however, many users make their own versions from metal or by using 3D printers
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Dialux microscope repair parts
- Mikroskopobjektiv für Leitz SM und Leitz Dialux Mikroskope
- Leitz Wetzlar Ortholux / Orthoplan 45x Mikroskop Objektiv
- Leitz Wetzlar Leitz Objektiv mit 37 mm Abgleichlänge
- Leitz Objektiv mit 170 mm Tubuslänge
- Leitz objective for Dialux / Ortholux and Orthoplan microscope
- Leitz Wetzlar 45/0.65 170/0.17 Objektiv 37 mm
- Leitz SM / Dialux 45x objective replacement
- objektiv Leitz Wetzlar 45x
- objetivo Leitz Wetzlar 45x 170 mm
- objetivo para microscopio Leitz SM
- obiettivo Leitz Wetzlar 45x 170 mm
- obiettivo per microscopio Leitz SM
- obiektyw mikroskopowy Leitz Wetzlar 45x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Dialux
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you want to keep such an objective lens as a spare
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99500
|
Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906
|
|
Description of this part for the microscope.
Microscope objective manufactured by Zeiss West Germany.
Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 16x
Model: Plan 16/0.
...
35 160/0.17
Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906)
Color correction: Planachromat
Numerical aperture N.A.: 0.35
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan Mikroskopobjektiv
- Zeiss Standard GFL / WL microscope objective
- Zeiss Phomi / Universal Mikroskop Objektiv
- Zeiss West Germany planachromat microscope objective
- Zeiss Plan 16/0.35 160/0.17 Objektiv 460510-9906
- Zeiss Standard WL Plan 16x objective 45 mm
- objektiv Zeiss Plan 16x
- objetivo Zeiss Plan 16x
- objetivo 16x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 16x
- obiettivo 16x per microscopio Carl Zeiss Jena Ergaval
- obiektyw planachromatyczny Zeiss Plan 16x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
95 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99501
|
Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904
|
|
Description of this part for the microscope.
Microscope objective manufactured by Zeiss West Germany.
Technical parameters:
Manufacturer: Zeiss West Germany
Magnification: 40x
Model: Plan 40/0.
...
65 160/0.17
Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904)
Color correction: Planachromat
Numerical aperture N.A.: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss Standard WL microscope repair parts
- Zeiss Plan Mikroskopobjektiv
- Zeiss Standard GFL / WL microscope objective
- Zeiss Phomi / Universal Mikroskop Objektiv
- Zeiss West Germany planachromat microscope objective
- Zeiss Plan 40/0.65 160/0.17 Objektiv 460710-9904
- Zeiss Standard WL Plan 40x objective 45 mm
- objektiv Zeiss Plan 40x
- objetivo Zeiss Plan 40x
- objetivo 40x para microscopio Carl Zeiss Jena Amplival
- obiettivo Zeiss Plan 40x
- obiettivo 40x per microscopio Carl Zeiss Jena Ergaval
- obiektyw planachromatyczny Zeiss Plan 40x
- Zeiss buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
125 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Zeiss
Carl Zeiss West Germany
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Standard WL
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Zeiss)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
-
if you currently have an achromatic microscope objective and want to change it to a plan achromatic one to have a flat image in the full field of view
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99499
|
Wild M20 Heerbrugg 40/0,65 d=0,17 RMS microscope objective 40x, Switzerland
|
|
Description of this part for the microscope.
40x microscope objective manufactured by Wild Heerbrugg for the Wild M20 microscope.
Manufacturer: Wild Heerbrugg, Switzerland
Model: 40/0.65 d=0.
...
17
Magnification: 40x
Correction: Achromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm thickness
Immersion: no (dry objective)
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it must support RMS objectives with TL=160 mm and FL=33 mm. After installing a 12 mm adapter, this objective can of course also be used in microscopes designed for FL=45 mm.
The fact that this objective has FL = 33 mm (meaning it is a so-called short objective) allows it to be used with microscopes from other manufacturers, including:
- Carl Zeiss Jena Lg
- Carl Zeiss Jena Lumipan
- Lomo Biolam
- Lomo MBB-1A
- PZO MB-10
- Nikon S
- Olympus KHC
Names, descriptions, terms, and search contexts under which this part is searched.
- Wild M20 microscope repair parts
- Wild M20 Mikroskopobjektiv
- Wild M20 microscope objective
- Wild Heerbrugg Mikroskop Objektiv
- Lomo Biolam 40x Mikroskopobjektiv
- Carl Zeiss Jena Lumipan Mikroskopobjektiv
- Olympus CH Mikroskop Objektiv
- Wild M20 40/0.65 Objektiv 33 mm
- Wild Heerbrugg 40x short barrel objective Olympus CH
- objektiv Wild M20 40x
- objetivo Wild M20 40x
- objetivo 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo Wild M20 40x
- obiettivo 40x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy Wild M20 40x
- Wild buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Wild
Wild Heerbrugg Switzerland
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
M20
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Wild)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99512
|
Lomo 20 0,40 RMS microscope objective 20x LZOS Lytkarino S/N 01234
|
|
Description of this part for the microscope.
20x microscope objective made by Lomo with the LZOS Lytkarino factory logo and a unique "golden" serial number.
Manufacturer: LZOS Lytkarino (commonly,
...
although incorrectly, referred to as "Lomo")
Model: 20 0,40
Magnification: 20x
Correction: Achromat
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: 0.17 mm
Immersion: no
Thread: RMS
Serial number: 01234
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=33 mm.
After installing a 12 mm adapter, this combination of adapter and objective will function as an objective with FL=45 mm.
This objective is attractive mainly to collectors because:
- there are very few microscope objectives with the LZOS logo on the secondary market
- the objective has a so-called "golden serial number": 01234
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Lomo LZOS Lytkarino microscope objective
- LZOS Mikroskopobjektiv
- Lomo Biolam 20x Mikroskopobjektiv
- Lomo 20 0.40 RMS Objektiv 33 mm
- LZOS Lytkarino 20x objective Carl Zeiss Jena Lumipan
- Bresser Biolam 20x Objektiv
- objektiv LOMO 20x a Zeiss Jena
- objetivo LOMO 20x para microscopio Lomo Biolam
- objetivo 20x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 20x per microscopio Lomo Biolam
- obiettivo 20x per microscopio Carl Zeiss Jena Lg
- obiektyw mikroskopowy LOMO 20x
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
100 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99536
|
Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x
|
|
Description of this part for the microscope.
Microscope objective manufactured by Leitz Wetzlar with 100x magnification, designed for brightfield and phase contrast work.
Manufacturer: Leitz
...
Wetzlar
Model: 160/0,17 EF 100/1.25 OEL PHACO 3
Magnification: 100x
Correction: semi-plan achromat
Numerical aperture: 1.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0.17 mm
Immersion: yes, oil
Thread: RMS
Specimen protection: yes - spring-loaded
Info: PHACO 3 = phase contrast
Some important information about this objective:
- the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces
- the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat
- this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm
- the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3")
- this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm
This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters).
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz Diaplan microscope repair parts
- Leitz Wetzlar Diaplan Phasenkontrast Mikroskopobjektiv
- Leitz Wetzlar 100x oil phase contrast microscope objective
- Leitz Wetzlar Phasenkontrast-Mikroskop
- Leitz Wetzlar 160 mm Phasenkontrast Kondensor
- Leitz EF 100/1.25 OEL Phaco 3 Objektiv
- Leitz Phaco 3 100x oil phase contrast objective 45 mm
- objektiv fázový kontrast Leitz Phaco 3 100x
- objetivo contraste de fases Leitz Phaco 3 100x
- objetivo 100x para microscopio PZO Biolar
- obiettivo contrasto di fase Leitz Phaco 3 100x
- obiettivo 100x per microscopio PZO Biolar
- obiektyw fazowy Leitz Phaco 3 100x
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Diaplan
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99563
|
Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm
|
|
Description of this part for the microscope.
PLAN achromatic polarizing microscope objective Lomo PLAN 25x0.50 P with iris diaphragm for Lomo Polam series polarizing microscopes.
Basic par
...
ameters:
Manufacturer: Lomo
Model: PLAN 25x0.50 P
Original designation: ЛОМО ПЛАН 25х0,50 П
Magnification: 25x
Numerical aperture N.A.: 0.50
Tube length: 160 mm
Cover glass: yes, 0.17 mm thickness
Immersion oil: no - this is a dry objective
Focal length: 45 mm
Thread type: RMS
Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light
Special features: built-in iris diaphragm
Year of manufacture: 1976
This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others.
The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously:
- field diaphragm in the illuminator
- aperture diaphragm (or two aperture diaphragms) in the condenser
- iris diaphragm in the microscope objective
- iris diaphragm in the eyepiece head
and accurate centering of all of them relative to each other is very important in polarized-light observations.
Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Polam L-213 microscope repair parts
- Lomo Polam POL-Mikroskop Objektiv
- Lomo Polam Mikroskopobjektiv mit Irisblende
- Lomo Polam Mikroskop 25x RMS Objektiv
- Lomo Polam microscope objective
- Lomo Polam polarizing microscope objective
- Lomo Polam PLAN 25x0.50 P Objektiv mit Irisblende 45 mm
- Lomo Polam L-213 plan 25x polarizing objective iris
- polarizační objektiv Lomo Polam 25x
- objetivo de polarización Lomo Polam 25x
- objetivo 25x para microscopio PZO Biolar
- obiettivo polarizzazione Lomo Polam 25x
- obiettivo 25x per microscopio PZO Biolar
- obiektyw polaryzacyjny Lomo Polam 25x z przysłoną
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
79 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Polam L-213
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope from any manufacturer and this is the objective you are missing
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91039
|
Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography, S/N 039562
|
|
Description of this part for the microscope.
Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography.
Technical parameters:
Manufacturer: Carl Zeiss Jena
Magnification: 6.
...
3x
Model: Semiplan 6.3/0.16 160/-
Serial number: 039 562 (039562)
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
This is one of the most commonly used microscope objectives for macro photography and focus stacking.
Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Amplival microscope repair parts
- Carl Zeiss Jena Semiplan Mikroskopobjektiv
- Carl Zeiss Jena Amplival microscope objective
- Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleiner Vergrößerung
- obiektyw mikroskopowy do fotografowania owadów
- Mikroskop-Semiplan Objektiv für Insekten-Makrofotografie
- Carl Zeiss Jena Semiplan 6.3/0.16 160/- RMS
- CZJ Semiplan 6.3x objective for macro photography with bellows
- Semiplan 6.3x Makroobjektiv am Balgengerät
- Semiplan 6.3x focus stacking insects
- Carl Zeiss Jena Laboval 6.3x Objektiv Ersatz
- Olympus BHA / CH-2 6.3x RMS objective 45 mm
- objektiv Carl Zeiss Jena Semiplan 6.3x pro makrofotografii
- objetivo Carl Zeiss Jena Semiplan 6.3x para macrofotografía
- objetivo 6.3x para microscopio PZO Biolar
- obiettivo Carl Zeiss Jena Semiplan 6.3x per macrofotografia
- obiettivo 6.3x per microscopio PZO Biolar
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
169 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Amplival
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you need a microscope objective for macro photography
-
If you have a microscope from any brand that lacks an objective lens with this magnification
-
If you have such a lens, but it is of very poor quality or damaged
-
...
-
If you are cautious and want to have such a lens on hand
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91018
|
Will Wetzlar V300 / V365 4/0.10 160/- RMS 4x microscope objective, long barrel 45 mm, achromatic | Hund H600 und Leitz Wetzlar compatible
|
|
Description of this part for the microscope.
Achromatic microscope objective by Will Wetzlar, 4x magnification, 45 mm parfocal distance.
Manufacturer: Will Wetzlar
Magnification: 4x
Model: 4/0.
...
10 160/-
Numerical aperture N.A.: 0.10
Cover glass: not required
Thread: RMS
Tube length: 160 mm
Parfocal distance: 45 mm (so-called long objective)
Immersion: no (dry objective)
This objective can be used:
- on biological transmitted light microscopes
- on inverted microscopes
- on microscopes with a reflected light illuminator
- for macro photography, connected directly to a camera
This is the so-called black series of objectives, named after the black plastic objective barrel. They were used mainly in the Will Wetzlar microscopes of the V300 series, for example in the Wilozyt V365 model. This was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared, for example, in the Leitz Wetzlar HM-LUX-3 microscopes.
It is worth noting that the Will Wetzlar microscopes of the V100 and V200 series were usually fitted with objectives of 37 mm parfocal distance - but newer objectives with a parfocal distance of 45 mm, such as those of the black series, can be used in them without any problems whatsoever.
The companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel, Kosmos Stuttgart and Hund Wetzlar also used objectives made by Will Wetzlar, although these often carried their own company name. It can therefore be said with a high degree of confidence that this objective will also fit the microscopes of those companies.
This objective fits practically any microscope of any make, provided it has an RMS thread and accepts objectives with TL=160 mm and parfocal distances of 33 / 37 and 45 mm. A few examples of such microscopes are listed in the "kompatybilność" section, but that list is not exhaustive.
Names, descriptions, terms, and search contexts under which this part is searched.
- Will Wetzlar V300 microscope repair parts
- Will Wetzlar V300 / V365 microscope objective
- Hund H600 microscope objective
- Will Wetzlar V300 Mikroskopobjektiv
- Will Wetzlar BX300 Mikroskop Objektiv
- Will Wetzlar V365 Mikroskop 4-fache Vergrößerung
- Hund H600 Mikroskop Objektiv
- CBS Beck Kassel microscope objective
- CBS Beck Kassel Mikroskop Objektiv
- Leica HM-LUX 3 Mikroskopobjektiv
- Leitz Wetzlar HM-LUX 3 Mikroskop Objektiv
- Will Wetzlar 4/0.10 160/- long barrel 45 mm
- Will Wetzlar V300 4x Objektiv 45 mm Abgleichlänge
- Hund H600 / C300 4x objective replacement
- Will Wilozyt V365 4x Objektiv
- Delta Optical Genetic Pro 4x RMS objective 45 mm
- Will Wetzlar 4x Objektiv Pilz - Ersatz
- objektiv 4x Will Wetzlar 45 mm
- objetivo 4x Will Wetzlar para microscopio PZO Biolar
- objetivo acromático 4x para microscopio PZO Studar
- obiettivo 4x Will Wetzlar per microscopio PZO Biolar
- obiettivo acromatico 4x per microscopio PZO Studar
- Will Wetzlar buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
34 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Will Wetzlar
Will Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
V300
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Will Wetzlar)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Will Wetzlar microscope without a 4x / 5x objective and want to complete it with original parts
-
if you are looking for a good-quality 4x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91019
|
Will Wetzlar V300 / V365 RMS Oel 100/1.25 160/0.17 100x microscope objective, long barrel 45 mm, achromatic | Hund H600 and Leitz Wetzlar compatible
|
|
Description of this part for the microscope.
Achromatic microscope objective by Will Wetzlar, 100x magnification, 45 mm parfocal distance.
Manufacturer: Will Wetzlar
Magnification: 100x
Model: 100/1.
...
25 160/0.17
Numerical aperture N.A.: 1.25
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Parfocal distance: 45 mm (so-called long barrel)
Immersion: yes, oil immersion
This objective can be used:
- on biological transmitted light microscopes
- on inverted microscopes
- on microscopes with a reflected light illuminator
- for macro photography, connected directly to a camera
This is the so-called black series of objectives, named after the black plastic objective barrel. They were used mainly in the Will Wetzlar microscopes of the V300 series, for example in the Wilozyt V365 model. This was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared, for example, in the Leitz Wetzlar HM-LUX-3 microscopes.
It is worth noting that the Will Wetzlar microscopes of the V100 and V200 series were usually fitted with objectives of 37 mm parfocal distance - but newer objectives with a parfocal distance of 45 mm, such as those of the black series, can be used in them without any problems whatsoever.
The companies Eschenbach, Kremp Wetzlar, CBS Beck Kassel, Kosmos Stuttgart and Hund Wetzlar also used objectives made by Will Wetzlar, although these often carried their own company name. It can therefore be said with a high degree of confidence that this objective will also fit the microscopes of those companies.
This objective fits practically any microscope of any make, provided it has an RMS thread and accepts objectives with TL=160 mm and parfocal distances of 33 / 37 and 45 mm. A few examples of such microscopes are listed in the "kompatybilność" section, but that list is not exhaustive.
Names, descriptions, terms, and search contexts under which this part is searched.
- Will Wetzlar V300 microscope repair parts
- Will Wetzlar V300 / V365 microscope objective
- Hund H600 microscope objective
- Will Wetzlar V300 Mikroskopobjektiv
- Will Wetzlar BX300 Mikroskop Objektiv
- Will Wetzlar V365 Mikroskop 1000-fache Vergrößerung
- Hund H600 Mikroskop Objektiv
- CBS Beck Kassel microscope objective
- CBS Beck Kassel Mikroskop Objektiv
- Leica HM-LUX 3 Mikroskopobjektiv
- Leitz Wetzlar HM-LUX 3 Mikroskop Objektiv
- Will Wetzlar Oel 100/1.25 160/0.17 long barrel 45 mm
- Will Wetzlar V300 100x Ölimmersion 45 mm Abgleichlänge
- Hund H600 / C300 100x oil objective replacement
- Will Wilozyt V365 100x Öl Objektiv
- Will Wetzlar 100x Frontlinse zerkratzt - Ersatz
- Will Wetzlar 100x oil objective fungus - replacement
- objektiv 100x olejová imerze Will Wetzlar 45 mm
- objetivo 100x inmersión en aceite Will Wetzlar para PZO Biolar
- objetivo 100x aceite para microscopio PZO Studar
- obiettivo 100x ad immersione Will Wetzlar per PZO Biolar
- obiettivo 100x a olio per microscopio PZO Studar
- Will Wetzlar buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Will Wetzlar
Will Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
V300
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Will Wetzlar)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Will Wetzlar microscope without a 100x objective and want to complete it with original parts
-
if you are looking for a good-quality 100x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91016
|
Leitz Wetzlar HM-LUX 3 / Leica 100/1.25 Oel P/N 519756 microscope objective 100x 160/0.17 | Hund H600 and Will Wetzlar compatible
|
|
Description of this part for the microscope.
Leitz Wetzlar achromatic microscope objective, 100x magnification, 45 mm parfocal length.
Manufacturer: Leitz Wetzlar
Magnification: 100x
Model: 160/0.
...
17 100/1.25 Oel
Catalogue number in the manufacturer's catalogue: 519756
Numerical aperture N.A.: 1.25
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (so-called long barrel objective)
Immersion: yes, oil
This is the so-called "black series" of objectives, named after the black plastic housing of the objective. They were used mainly in Leitz Wetzlar HM-LUX-3 microscopes (and in the model signed Leica HM-LUX 3). This was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same kind of "black series" could also be found in Will Wetzlar V300 / V355 / V365 or Nikon Alphaphot YS2 microscopes.
This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and accepts objectives with a tube length of 160 mm and a parfocal length of 33 / 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz HM-LUX 3 microscope repair parts
- Leica HM-LUX 3 Mikroskopobjektiv
- Leitz Wetzlar HM-LUX 3 Mikroskop Objektiv
- Will Wetzlar V300 / V365 microscope objective
- Hund H600 microscope objective
- Will Wetzlar V300 Mikroskopobjektiv
- Will Wetzlar BX300 Mikroskop Objektiv
- Will Wetzlar V365 Mikroskop 1000-fache Vergrößerung
- Hund H600 Mikroskop Objektiv
- CBS Beck Kassel microscope objective
- CBS Beck Kassel Mikroskop Objektiv
- Leica 519756 100x Öl Objektiv 160/0.17
- Leitz HM-LUX 3 100x oil objective P/N 519756
- Leitz 100x Ölimmersion Frontlinse zerkratzt - Ersatz
- Leica 100x oil objective fungus - replacement
- objektiv 100x olejová imerze Leitz Leica 519756
- objetivo 100x inmersión Leitz Leica 519756
- objetivo 100x aceite para microscopio PZO Biolar
- obiettivo 100x ad immersione Leitz Leica 519756
- obiettivo 100x a olio per microscopio PZO Biolar
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
HM-LUX 3
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Leica / Leitz Wetzlar microscope without a 100x objective and want to complete it with original parts
-
if you are looking for a good-quality 100x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
91015
|
Leitz Wetzlar HM-LUX 3 / Leica 10/0.25 P/N 519754 microscope objective 10x 160/- | Hund H600 and Will Wetzlar compatible
|
|
Description of this part for the microscope.
Leitz Wetzlar achromatic microscope objective, 10x magnification, 45 mm parfocal length.
Manufacturer: Leitz Wetzlar
Magnification: 10x
Model: 160/- 10/0.
...
25
Catalogue number in the manufacturer's catalogue: 519754
Numerical aperture N.A.: 0.25
Cover glass: not required
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (so-called long barrel objective)
Immersion: no (dry objective)
This is the so-called "black series" of objectives, named after the black plastic housing of the objective. They were used mainly in Leitz Wetzlar HM-LUX-3 microscopes (and in the model signed Leica HM-LUX 3). This was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same kind of "black series" could also be found in Will Wetzlar V300 / V355 / V365 or Nikon Alphaphot YS2 microscopes.
From 1990 onwards, the logo (and the name) "Leica" began to appear on microscopes that had until then been signed "Leitz". This was also visible on the HM-LUX 3 microscope - and this microscope can be found both with the "Leitz" logo and with "Leica". The same 10x objective that I present here with the name "Leitz Wetzlar" and manufacturer number 519754 also exists with the "Leica" marking - and NOTE - it carries exactly the same number, that is "519754".
This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and accepts objectives with a tube length of 160 mm and a parfocal length of 33 / 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Leitz HM-LUX 3 microscope repair parts
- Leica HM-LUX 3 Mikroskopobjektiv
- Leitz Wetzlar HM-LUX 3 Mikroskop Objektiv
- Will Wetzlar V300 / V365 microscope objective
- Hund H600 microscope objective
- Will Wetzlar V300 Mikroskopobjektiv
- Will Wetzlar BX300 Mikroskop Objektiv
- Will Wetzlar V365 Mikroskop 10-fache Vergrößerung
- Hund H600 Mikroskop Objektiv
- CBS Beck Kassel microscope objective
- CBS Beck Kassel Mikroskop Objektiv
- Leica 519754 10x Objektiv 160/-
- Leitz HM-LUX 3 10x objective P/N 519754
- Leitz 10x Objektiv Pilz - Ersatz
- Leica 10x objective scratched front lens
- objektiv 10x Leitz Leica 519754
- objetivo 10x Leitz Leica 519754
- objetivo 10x para microscopio PZO Biolar
- obiettivo 10x Leitz Leica 519754
- obiettivo 10x per microscopio PZO Biolar
- Leitz buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Leitz
Leitz Wetzlar
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
HM-LUX 3
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Leitz)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Leica / Leitz Wetzlar microscope without a 10x objective and want to complete it with original parts
-
if you are looking for a good-quality 100x objective for a microscope from another manufacturer
-
...
-
if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
-
if you want to keep such objective in reserve
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00473
|
LOMO 40 0.65 microscope objective 1992 | ЛОМО 40x Biolam and Carl Zeiss Jena Lg compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in Russia in 1992 (already after the dissolution of the USSR).
Basic parameters of this
...
objective:
Manufacturer: LOMO, Russia (ЛОМО)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1992
- LOMO 40x Objektiv Baujahr 1992
- LOMO 40x objective serial number 92
- LOMO Biolam 40x objective replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1A 40x Objektiv
- Carl Zeiss Jena Lg und Lumipan 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1992
- objektiv LOMO 40x 0.65 z roku 1992
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
22 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1992 (serial number starting with "92") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00474
|
LOMO 40 0.65 microscope objective 1989 | ЛОМО 40x Bresser Biolam and Carl Zeiss Jena Lumipan compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1989 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "89"
Year of manufacture: 1989
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1989
- LOMO 40x Objektiv Baujahr 1989
- LOMO 40x objective serial number 89
- LOMO Biolam 40x objective replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Lg und Lumipan 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1989
- objektiv LOMO 40x 0.65 z roku 1989
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
27 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1989 (serial number starting with "89") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00475
|
LOMO 40 0.65 microscope objective 1980 | ЛОМО 40x Carl Zeiss Jena Nf and Bresser Biolam compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1980 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "80"
Year of manufacture: 1980
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1980
- LOMO 40x Objektiv Baujahr 1980
- LOMO 40x objective serial number 80
- LOMO Biolam 40x objective replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Lg und Lumipan 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1980
- objektiv LOMO 40x 0.65 z roku 1980
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
26 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1980 (serial number starting with "80") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00476
|
LOMO 40 0.65 microscope objective 1979 | ЛОМО 40x Carl Zeiss Jena Laboval and Bresser Biolam compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1979 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "79"
Year of manufacture: 1979
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1979
- LOMO 40x Objektiv Baujahr 1979
- LOMO 40x objective serial number 79
- LOMO Biolam 40x objective replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Lg und Lumipan 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1979
- objektiv LOMO 40x 0.65 z roku 1979
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
23 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1979 (serial number starting with "79") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00477
|
LOMO 40 0.65 microscope objective 1977 | ЛОМО 40x Bresser Biolam and Olympus CH compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1977 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1977
- LOMO 40x Objektiv Baujahr 1977
- LOMO 40x objective serial number 77
- LOMO Biolam 40x objective Olympus CH replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Laboval und Nf 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1977
- objektiv LOMO 40x 0.65 z roku 1977
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1977 (serial number starting with "77") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00478
|
LOMO 40 0.65 microscope objective 1975 | ЛОМО 40x Carl Zeiss Jena, Bresser Biolam and IOR compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1975 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "75"
Year of manufacture: 1975
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1975
- LOMO 40x Objektiv Baujahr 1975
- LOMO 40x objective serial number 75
- LOMO Biolam 40x objective replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Lg und Lumipan 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1975
- objektiv LOMO 40x 0.65 z roku 1975
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1975 (serial number starting with "75") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
00479
|
LOMO 40 0.65 microscope objective 1973 | ЛОМО 40x Bresser Biolam and Euromex CSL compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with 40x magnification, manufactured in the Soviet Union (CCCP / USSR) in 1973 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: LOMO, (ЛОМО, former Soviet Union)
Magnification: 40x
Numerical aperture N.A.: 0.65
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide with the specimen
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year of manufacture. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. Very often this objective is mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO manufactured adapters from the RMS thread to M27. Thanks to them, this objective was used on LOMO Biolam I and LOMO Biolam M microscopes. Users of Carl Zeiss Axio series microscopes with the M27 thread took advantage of this as well and used these adapters too.
LOMO objectives are very popular among users of microscopes from other manufacturers. Because of the historical ties, owners of Carl Zeiss Jena microscopes regard them as a natural replacement for the German objectives.
This objective fits practically any microscope of any manufacturer, as long as it has an RMS thread and takes objectives with a 160 mm tube length and a 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "Compatibility" section, but this is not a complete list.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 40x 0.65 objective YOM 1973
- LOMO 40x Objektiv Baujahr 1973
- LOMO 40x objective serial number 73
- LOMO Biolam 40x objective Olympus CH replacement
- LOMO Biolam 40x Objektiv Ersatz
- ЛОМО 40x 0.65 RMS 160 objective
- LOMO MBB-1 40x Objektiv
- Carl Zeiss Jena Laboval und Nf 40x Objektiv Ersatz
- LOMO 40x short barrel objective 45 mm adapter
- Biolam 40x Objektiv Frontlinse zerkratzt
- Biolam 40x objective fungus - replacement
- Łomo Biolam obiektyw 40x 1973
- objektiv LOMO 40x 0.65 z roku 1973
- objetivo LOMO 40x 0.65 para microscopio PZO M-440
- objetivo LOMO 40x para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 40x 0.65 per microscopio PZO MB-10
- obiettivo LOMO 40x per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
3
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
21 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your LOMO microscope with original parts
-
If you need a 40x objective for LOMO, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you own a LOMO microscope from 1973 (serial number starting with "73") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99801
|
LOMO MI 90 1.25 microscope objective 1993 | ЛОМО Oil 90x Biolam and Carl Zeiss Jena Lg compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in Russia in 1993 (after the collapse of the USSR).
Basic parameters of this
...
objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "93"
Year of manufacture: 1993
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1993
- LOMO 90x Öl Objektiv Baujahr 1993
- LOMO 90x objective serial number 93
- LOMO Biolam 90x oil immersion objective replacement
- LOMO Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena Lg und Lumipan 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Biolam 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1993
- objektiv LOMO 90x olejová imerze z roku 1993
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
19 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1993 (serial number starting with "93") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99802
|
LOMO MI 90 1.25 microscope objective 1992 | ЛОМО Oil 90x Biolam and Olympus CH compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in Russia in 1992 (after the collapse of the USSR).
Basic parameters of this
...
objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1992
- LOMO 90x Öl Objektiv Baujahr 1992
- LOMO 90x objective serial number 92
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena Lg und Lumipan 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Olympus CH 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1992
- objektiv LOMO 90x olejová imerze z roku 1992
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
20 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1992 (serial number starting with "92") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99803
|
LOMO MI 90 1.25 microscope objective 1991 | ЛОМО Oil 90x Carl Zeiss Jena Lumipan and Biolam compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in Soviet Union / Russia in 1991.
Basic parameters of this objective:
Manufacturer:
...
Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "91"
Year of manufacture: 1991
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1991
- LOMO 90x Öl Objektiv Baujahr 1991
- LOMO 90x objective serial number 91
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena Lumipan und Nf 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Nikon S 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1991
- objektiv LOMO 90x olejová imerze z roku 1991
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
21 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Carl Zeiss Jena, PZO, Olympus or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1991 (serial number starting with "91") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99804
|
LOMO MI 90 1.25 microscope objective 1985 | ЛОМО Oil 90x SWIFT M2240, Carl Zeiss Jena and Biolam compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in in the Soviet Union (CCCP / USSR) in 1985 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "85"
Year of manufacture: 1985
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1985
- LOMO 90x Öl Objektiv Baujahr 1985
- LOMO 90x objective serial number 85
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena Lumipan und Nf 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Nikon S 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1985
- objektiv LOMO 90x olejová imerze z roku 1985
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
22 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Carl Zeiss Jena, PZO, Euromex or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1985 (serial number starting with "85") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99805
|
LOMO Biolam MI 90 1.25 microscope objective 1977 | ЛОМО Oil 90x Olympus HSC and Carl Zeiss Jena Nf compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in in the Soviet Union (CCCP / USSR) in 1977 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "77"
Year of manufacture: 1977
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1977
- LOMO 90x Öl Objektiv Baujahr 1977
- LOMO 90x objective serial number 77
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Olympus KHC 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1977
- objektiv LOMO 90x olejová imerze z roku 1977
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
23 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Olympus, Carl Zeiss Jena, PZO, Euromex or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1977 (serial number starting with "77") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99806
|
LOMO Biolam 90x Oil microscope objective MI 90 1.25 1974 | Vickers M15 and ЛОМО Polam R-113 compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in in the Soviet Union (CCCP / USSR) in 1974 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "74"
Year of manufacture: 1974
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1974
- LOMO 90x Öl Objektiv Baujahr 1974
- LOMO 90x objective serial number 74
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Olympus FH 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1974
- objektiv LOMO 90x olejová imerze z roku 1974
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Olympus, Carl Zeiss Jena, PZO, Euromex or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1974 (serial number starting with "74") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99807
|
LOMO Erudit 90x Oil microscope objective MI 90 1.25 1973 | Bresser Biolam, ЛОМО and Carl Zeiss Jena compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) oil immersion microscope objective, 90x magnification, made in in the Soviet Union (CCCP / USSR) in 1973 (i.e. before the dissolution of the USSR).
...
Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 90x
Marking on the objective: МИ 90 1.25 (MI 90 1.25)
Numerical aperture N.A.: 1.25
Serial number: starts with "73"
Year of manufacture: 1973
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Translation: "МИ" stands for "масляная иммерсия", i.e. "oil immersion"
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 90x 1.25 oil objective YOM 1973
- LOMO 90x Öl Objektiv Baujahr 1973
- LOMO 90x objective serial number 73
- LOMO Biolam 90x oil immersion objective replacement
- Bresser Biolam 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- LOMO MBB-1A 90x Objektiv
- Carl Zeiss Jena 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Olympus FH 90x objective fungus - replacement
- Łomo obiektyw 90x immersja olejowa 1973
- objektiv LOMO 90x olejová imerze z roku 1973
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you need a 90x / 100x immersion objective for Lomo, Olympus, Carl Zeiss Jena, PZO, Euromex or other compatible microscopes
-
...
-
If you have a Lomo microscope from 1973 (serial number starting with "73") and want period-correct objectives in it
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99809
|
LOMO 8 0.20 microscope objective 8x for macro photography 1972 | Bresser Biolam, ЛОМО MBR-3 and Carl Zeiss Jena Lg compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with low 8x magnification, made in the Soviet Union (CCCP / USSR) in 1972 (i.e. before the collapse of the USSR).
The LOMO 8x
...
objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.
Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "72"
Year of manufacture: 1972
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS
Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.
A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 8x 0.20 microscope objective from 1972
- LOMO 8x Objektiv Baujahr 1972
- LOMO objective serial number starting with 72
- LOMO 8x 0.20 for macro photography with bellows
- LOMO 8x Mikroskopobjektiv für Makrofotografie am Balgengerät
- microscope objective for insect macro photography - LOMO 8x
- Bernstein Einschlüsse fotografieren mit LOMO 8x Objektiv
- LOMO 8x objective for focus stacking rail
- LOMO 8x RMS adapter for camera
- Biolam 8x Objektiv Ersatz
- LOMO Biolam 8x objective replacement
- Carl Zeiss Jena Lumipan 8x Objektiv Ersatz
- ЛОМО 8 0.20 объектив СССР
- LOMO 8x short barrel 33 mm on 45 mm microscope with 12 mm extension
- Biolam 8x Frontlinse zerkratzt - Ersatz
- LOMO 8x objective fungus - replacement
- Łomo obiektyw 8x do makrofotografii 1972
- objektiv LOMO 8x pro makrofotografii z roku 1972
- objetivo LOMO 8x para macrofotografía
- objetivo LOMO 8x para microscopio PZO M-440
- obiettivo LOMO 8x per macrofotografia
- obiettivo LOMO 8x per microscopio Carl Zeiss Jena Lumipan
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
25 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you are looking for an objective for macro photography
-
If you are looking for a low-magnification objective for observing objects with external, side-mounted incident light
-
...
-
If you need an 8x objective for Lomo, Carl Zeiss Jena or other compatible microscopes
-
If you have a Lomo microscope from 1972 (serial number starting with "72") and want period-correct objectives in it
-
If you are building your own focus stacking rail (e.g. with a stepper motor)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99810
|
LOMO 8 0.20 microscope objective 8x for macro photography 1986 | Bresser Biolam, ЛОМО MBI-1 and Carl Zeiss Jena Lumipan compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with low 8x magnification, made in the Soviet Union (CCCP / USSR) in 1986 (i.e. before the collapse of the USSR).
The LOMO 8x
...
objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.
Basic parameters of this objective:
Manufacturer: Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "86"
Year of manufacture: 1986
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS
Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.
A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 8x 0.20 microscope objective from 1986
- LOMO 8x Objektiv Baujahr 1986
- LOMO objective serial number starting with 86
- LOMO 8x 0.20 for macro photography with bellows
- LOMO 8x Mikroskopobjektiv für Makrofotografie am Balgengerät
- microscope objective for insect macro photography - LOMO 8x
- Bernstein Einschlüsse fotografieren mit LOMO 8x Objektiv
- LOMO 8x objective for focus stacking rail
- LOMO 8x RMS adapter for camera
- Biolam 8x Objektiv Ersatz
- LOMO Biolam 8x objective replacement
- Carl Zeiss Jena Lumipan 8x Objektiv Ersatz
- ЛОМО 8 0.20 объектив СССР
- LOMO 8x short barrel 33 mm on 45 mm microscope with 12 mm extension
- Biolam 8x Frontlinse zerkratzt - Ersatz
- LOMO 8x objective fungus - replacement
- Łomo obiektyw 8x do makrofotografii 1986
- objektiv LOMO 8x pro makrofotografii z roku 1986
- objetivo LOMO 8x para macrofotografía
- objetivo LOMO 8x para microscopio PZO M-440
- obiettivo LOMO 8x per macrofotografia
- obiettivo LOMO 8x per microscopio Carl Zeiss Jena Lumipan
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
24 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you are looking for an objective for macro photography
-
If you are looking for a low-magnification objective for observing objects with external, side-mounted incident light
-
...
-
If you need an 8x objective for Lomo, Carl Zeiss Jena or other compatible microscopes
-
If you have a Lomo microscope from 1986 (serial number starting with "86") and want period-correct objectives in it
-
If you are building your own focus stacking rail (e.g. with a stepper motor)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99811
|
LOMO 8 0.20 microscope objective 8x for macro photography 1992 | Olympus CH, Bresser Biolam, ЛОМО and Carl Zeiss Jena compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with low 8x magnification, made in Russia in 1992 (after the collapse of the USSR).
The LOMO 8x objective (model 8 0.
...
20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.
Basic parameters of this objective:
Manufacturer: Lomo, Russia (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "92"
Year of manufacture: 1992
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS
Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.
A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 8x 0.20 microscope objective from 1992
- LOMO 8x Objektiv Baujahr 1992
- LOMO objective serial number starting with 92
- LOMO 8x 0.20 for macro photography with bellows
- LOMO 8x Mikroskopobjektiv für Makrofotografie am Balgengerät
- microscope objective for insect macro photography - LOMO 8x
- Bernstein Einschlüsse fotografieren mit LOMO 8x Objektiv
- LOMO 8x objective for focus stacking rail
- LOMO 8x RMS adapter for camera
- Biolam 8x Objektiv Ersatz
- LOMO Biolam 8x objective replacement
- Carl Zeiss Jena Lumipan 8x Objektiv Ersatz
- ЛОМО 8 0.20 объектив
- LOMO 8x short barrel 33 mm on 45 mm microscope with 12 mm extension
- Biolam 8x Frontlinse zerkratzt - Ersatz
- LOMO 8x objective fungus - replacement
- Łomo obiektyw 8x do makrofotografii 1992
- objektiv LOMO 8x pro makrofotografii z roku 1992
- objetivo LOMO 8x para macrofotografía
- objetivo LOMO 8x para microscopio PZO M-440
- obiettivo LOMO 8x per macrofotografia
- obiettivo LOMO 8x per microscopio Carl Zeiss Jena Lumipan
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
2
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
23 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you are looking for an objective for macro photography
-
If you are looking for a low-magnification objective for observing objects with external, side-mounted incident light
-
...
-
If you need an 8x objective for Lomo, Carl Zeiss Jena or other compatible microscopes
-
If you have a Lomo microscope from 1992 (serial number starting with "92") and want period-correct objectives in it
-
If you are building your own focus stacking rail (e.g. with a stepper motor)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99812
|
LOMO 8x microscope objective 8 0.20 for macro photography 1966 | Biolam, ЛОМО MBI-1 / MBR-3 and Carl Zeiss Jena L-Stand compatible
|
|
Description of this part for the microscope.
LOMO (ЛОМО) microscope objective with low 8x magnification, made in the Soviet Union (CCCP / USSR) in 1966.
Basic parameters of this objective:
Manufacturer:
...
Lomo, USSR (ЛОМО)
Magnification: 8x
Correction: achromatic
Marking on the objective: 8 0.20
Numerical aperture N.A.: 0.20
Serial number: starts with "66"
Year of manufacture: 1966
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no (dry objective)
Thread: RMS
The LOMO 8x objective (model 8 0.20) is frequently used for macro photography with a microscope or a camera (via an RMS adapter or a bellows). Although it is an achromat, it renders fine detail very sharply and performs well in focus stacking. It complements a set together with the LOMO 3.7x, Carl Zeiss Jena Semiplan 6.3x and Nikon M Plan 10x.
Important - this objective is suitable for direct projection photography, as it does not require plan-compensating optics.
A microscope objective with such low magnification (with a 160 mm tube length it gives an 8:1 reproduction ratio) is used, among other things, for observing or photographing:
- insects
- minerals
- inclusions in amber
- handwriting
- micro shells (micromollusks)
- and much more
Why do I state the year of manufacture in the description of this objective? Older LOMO microscope parts (objectives, microscopes, heads) have the year of manufacture encoded in the serial number: the first two digits of the serial number are the year. Many users want to complete their microscope with parts made in the same year as the microscope itself.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
Fun fact: LOMO made adapters between the RMS and M27 threads. Thanks to them, this objective was fitted to the Lomo Biolam I and Lomo Biolam M microscopes. Owners of Carl Zeiss Axio series microscopes with M27 thread also took advantage of this and used these adapters.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- LOMO 8x 0.20 microscope objective from 1966
- LOMO 8x Objektiv Baujahr 1966
- LOMO objective serial number starting with 66
- LOMO 8x 0.20 for macro photography with bellows
- LOMO 8x Mikroskopobjektiv für Makrofotografie am Balgengerät
- microscope objective for insect macro photography - LOMO 8x
- Bernstein Einschlüsse fotografieren mit LOMO 8x Objektiv
- LOMO 8x objective for focus stacking rail
- LOMO 8x RMS adapter for camera
- Biolam 8x Objektiv Ersatz
- LOMO Biolam 8x objective replacement
- Carl Zeiss Jena Lumipan 8x Objektiv Ersatz
- ЛОМО 8 0.20 объектив СССР
- LOMO 8x short barrel 33 mm on 45 mm microscope with 12 mm extension
- Biolam 8x Frontlinse zerkratzt - Ersatz
- LOMO 8x objective fungus - replacement
- Łomo obiektyw 8x do makrofotografii 1966
- objektiv LOMO 8x pro makrofotografii z roku 1966
- objetivo LOMO 8x para macrofotografía
- objetivo LOMO 8x para microscopio PZO M-440
- obiettivo LOMO 8x per macrofotografia
- obiettivo LOMO 8x per microscopio Carl Zeiss Jena Lumipan
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Lomo microscope with original parts
-
If you are looking for an objective for macro photography
-
If you are looking for a low-magnification objective for observing objects with external, side-mounted incident light
-
...
-
If you need an 8x objective for Lomo, Carl Zeiss Jena or other compatible microscopes
-
If you have a Lomo microscope from 1966 (serial number starting with "66") and want period-correct objectives in it
-
If you are building your own focus stacking rail (e.g. with a stepper motor)
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99819
|
Carl Zeiss Jena Jenalumar microscope Apochromat 50x/0,95 oo/0,17-A objective with M25 thread and correction collar | Jenamed and Jenaval compatible
|
|
Description of this part for the microscope.
Apochromatic 50x microscope objective made by Carl Zeiss Jena.
Basic objective parameters:
Manufacturer: Carl Zeiss Jena
Model: Apochromat 50x/0,95 ∞/0,
...
17-A
Magnification: 50x
Numerical aperture N.A.: 0.95
Optical correction: Apochromat
Additionally: cover glass thickness correction collar, range 0.12 - 0.22 mm
Tube length: infinity
Thread: M25
Cover glass: yes, required
Immersion: no (so-called dry objective)
Commonly used, cheap cover glasses are 0.17 mm thick mostly on paper. Even the standard for class #1.5 allows a range of 0.16-0.19 mm, and cheap Chinese cover glasses in practice come in anywhere from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. With high-aperture dry objectives such as this Apochromat 50x/0.95, variation in cover glass thickness noticeably reduces image contrast and resolution (spherical aberration). The correction collar fitted to this objective lets you adjust the optics to the combined thickness of the cover glass and the mounting medium layer beneath it, within a range of 0.12 mm to 0.22 mm. This compensates for most of the variation encountered in practice.
This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
As for the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2
Names, descriptions, terms, and search contexts under which this part is searched.
- Carl Zeiss Jena Jenalumar microscope repair parts
- Carl Zeiss Jena Apochromat 50x/0.95 microscope objective with correction collar
- CZJ Apochromat 50x/0.95 Mikroskopobjektiv mit Korrekturring
- Jenamed 2 Apochromat 50x objective
- Jenaval Apochromat 50x Objektiv
- Jenalumar Jenalab 50x/0.95 infinity objective M25
- Jenamed Fluoreszenz Apochromat 50x Objektiv
- Zeiss Jena 50x/0.95 Deckglasdicke Korrekturring einstellen
- apochromatický objektiv Carl Zeiss Jena 50x/0.95
- objetivo apocromático Carl Zeiss Jena 50x/0.95
- objetivo 50x con anillo de corrección microscopio Jenaval
- obiettivo apocromatico Carl Zeiss Jena 50x/0.95
- obiettivo 50x con collare di correzione microscopio Jenaval
- Carl Zeiss Jena buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
199 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Carl Zeiss Jena
VEB Carl Zeiss Jena DDR (former East Germany)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Jenalumar
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Carl Zeiss Jena)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope is missing an objective of this magnification
-
if you need an objective with cover glass thickness correction
-
if you have an achromatic objective and want to upgrade your microscope by replacing it with this one, which offers better color correction - useful e.g. in fluorescence microscopy
-
...
-
if you already have such an objective, but it is damaged or of very poor quality
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99808
|
LOMO / Bresser Biolam 90x Oil microscope objective A 90*1.25 with RMS thread
|
|
Description of this part for the microscope.
Export version of a LOMO (ЛОМО) oil immersion microscope objective with 90x magnification.
Basic parameters of this objective:
Manufacturer: Lomo
...
(ЛОМО)
Version: this is the OEM version of this objective; it was made for export and has no engraved manufacturer logo
Magnification: 90x
Correction: achromatic
Marking on the objective: A 90*1.25
Numerical aperture N.A.: 1.25
Tube length: 160 mm
Parfocal length: 33 mm - so-called short barrel objective
Cover glass: yes, 0.17 mm thick
Immersion: yes, oil
Specimen protection: yes, the objective has a spring-loaded front mount that prevents breaking the slide
Thread: RMS
LOMO exported its microscopes to Western Europe, where they were sold under the names Bresser Biolam / Bresser Erudit (mainly in Germany) and Zenith Biolam (in the UK). These microscopes often (but not always) came with special versions of the objectives without the "ЛОМО" engraving.
Apart from the missing manufacturer name, the export version also differs in the way the parameters are marked. On the LOMO version the marking read "МИ 90 1.25", where "МИ" is an abbreviation written in Cyrillic, corresponding to "MI" and meaning "oil immersion". The export version dropped the Cyrillic (and even the immersion information), and the marking changed to "A 90*1.25".
A note on the Bresser Erudit microscope: Bresser sold two different microscopes under this name. The first was a Lomo microscope labelled "Bresser Erudit", the second is the plastic, Chinese-made "Bresser Erudit DLX" microscope.
The microscope objective offered here fits the first of these two Erudit microscopes. A photo gallery of the first model can be found here: https://www.microscopeparts.eu/gallery/lomo-erudit-microscopes-207.
This is a so-called short barrel objective with a parfocal length of 33 mm. It is very often mounted on a 12 mm extension, which allows it to be used in microscopes that require objectives with a 45 mm parfocal length. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well here.
LOMO objectives are very popular with owners of microscopes from other manufacturers. Due to historical ties, owners of Carl Zeiss Jena microscopes regard them as an obvious replacement for the German objectives.
This objective fits practically any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives with TL = 160 mm and 33 mm parfocal length (or 37 / 45 mm with a suitable adapter). Several example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo Biolam microscope repair parts
- Bresser / LOMO A 90x 1.25 oil objective
- LOMO 90x Öl Objektiv
- LOMO 90x objective
- Bresser Biolam 90x oil immersion objective replacement
- Bresser Biolam A 90x Oel Immersion Objektiv Ersatz
- ЛОМО МИ 90 1.25 RMS 160 objective
- Euromex CSL 90x Objektiv
- Carl Zeiss Jena 90x Öl Objektiv Ersatz
- LOMO 90x short barrel objective 45 mm adapter
- Biolam 90x Objektiv Frontlinse zerkratzt
- Olympus FH 90x objective fungus - replacement
- Łomo / Bresser obiektyw 90x immersja olejowa
- objektiv LOMO 90x olejová imerze Bresser Biolam
- objetivo LOMO 90x inmersión en aceite para microscopio PZO M-440
- objetivo LOMO 90x aceite para microscopio Carl Zeiss Jena Lumipan
- obiettivo LOMO 90x ad immersione per microscopio PZO MB-10
- obiettivo LOMO 90x a olio per microscopio Carl Zeiss Jena Lg
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
3
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
26 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
Biolam
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you want to complete your Bresser Biolam / Lomo Biolam microscope with original parts
-
If you need a 90x / 100x immersion objective for Bresser, Lomo, Carl Zeiss Jena, Euromex or other compatible microscopes
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99816
|
Dr. G. Schuchardt Göttingen 50x microscope objective 50/0.82 with RMS thread | Hertel & Reuss compatible
|
|
Description of this part for the microscope.
50x microscope objective signed Dr. G. Schuchardt Göttingen.
Basic parameters of this objective:
Manufacturer: Hertel & Reuss for Dr. G. Schuchardt
...
Göttingen
Magnification: 50x
Optical correction: achromat
Numerical aperture N.A.: 0.82
Parfocal length: 37 mm
Tube length: 170 mm
Cover glass: yes, 0.17 mm thick
Immersion: no - this is a dry objective
Thread: RMS
This is a so-called "short barrel" objective with a parfocal length of 37 mm. It is very often mounted on an 8 mm extension, which allows it to be used in microscopes that require 45 mm (long barrel) objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.
The company "Dr. G. Schuchardt Göttingen" did not manufacture microscopes and does not manufacture them today. In the past it mainly sold microscopes made by Hertel & Reuss and Will Wetzlar under its own brand, today its products are imported from China.
This objective fits virtually any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives for TL = 170 mm with a parfocal length of 33 or 37 mm (or 45 mm when a suitable adapter is used). Several example microscopes are listed in the "Compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Schuchardt model microscope repair parts
- Dr. G. Schuchardt Göttingen 50x microscope objective
- Dr. G. Schuchardt Göttingen 50x Mikroskop Objektiv
- Hertel & Reuss 50x microscope objective
- Hertel & Reuss 50x Mikroskop Objektiv
- Dr. G. Schuchardt Göttingen 50/0.82 RMS Objektiv
- Schuchardt 50x RMS objective replacement
- Hertel & Reuss CN-fl / Primus 50x Objektiv Ersatz
- Leitz Laborlux S 50x RMS objective
- Steindorff Model S 50x Objektiv
- Schuchardt 50x Frontlinse zerkratzt - Ersatz
- objektiv 50x Dr. G. Schuchardt Göttingen
- objetivo 50x Dr. G. Schuchardt Göttingen
- objetivo 50x para microscopio Hertel & Reuss
- obiettivo 50x Dr. G. Schuchardt Göttingen
- obiettivo 50x per microscopio Hertel & Reuss
- Schuchardt buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Schuchardt
Dr. G. Schuchardt Göttingen
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
model
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Schuchardt)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Dr. G. Schuchardt Göttingen microscope without a 50x objective and want to complete it with original parts
-
if you want to use this objective on a microscope from another manufacturer
-
...
-
if you own such an objective but it is in very poor condition and needs to be replaced
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99817
|
Dr. G. Schuchardt Göttingen 5x microscope objective 5/0.10 with RMS thread | Hertel & Reuss compatible
|
|
Description of this part for the microscope.
5x microscope objective signed Dr. G. Schuchardt Göttingen.
Basic parameters of this objective:
Manufacturer: Hertel & Reuss for Dr. G. Schuchardt
...
Göttingen
Magnification: 5x
Optical correction: achromat
Numerical aperture N.A.: 0.10
Parfocal length: 37 mm
Tube length: 170 mm
Cover glass: not critical - objectives with such low magnification work both with and without a cover glass
Immersion: no - this is a dry objective
Thread: RMS
This is a so-called "short barrel" objective with a parfocal length of 37 mm. It is very often mounted on an 8 mm extension, which allows it to be used in microscopes that require 45 mm (long barrel) objectives. Professional adapters with protective optics, metal adapters and popular DIY 3D-printed adapters all work well for this.
The company "Dr. G. Schuchardt Göttingen" did not manufacture microscopes and does not manufacture them today. In the past it mainly sold microscopes made by Hertel & Reuss and Will Wetzlar under its own brand, today its products are imported from China.
This objective fits virtually any microscope from any manufacturer, as long as it has an RMS thread and accepts objectives for TL = 170 mm with a parfocal length of 33 or 37 mm (or 45 mm when a suitable adapter is used). Several example microscopes are listed in the "Compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Schuchardt model microscope repair parts
- Dr. G. Schuchardt Göttingen 5x microscope objective
- Dr. G. Schuchardt Göttingen 5x Mikroskop Objektiv
- Hertel & Reuss 5x microscope objective
- Hertel & Reuss 5x Mikroskop Objektiv
- Dr. G. Schuchardt Göttingen 5/0.10 RMS Objektiv
- Schuchardt 5x RMS objective replacement
- Hertel & Reuss CN-fl / Primus 5x Objektiv Ersatz
- Leitz Laborlux S 5x RMS objective
- Steindorff Model S 5x Objektiv
- Schuchardt 5x objective for macro photography
- objektiv 5x Dr. G. Schuchardt Göttingen
- objetivo 5x Dr. G. Schuchardt Göttingen
- objetivo 5x para microscopio Hertel & Reuss
- obiettivo 5x Dr. G. Schuchardt Göttingen
- obiettivo 5x per microscopio Hertel & Reuss
- Schuchardt buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
29 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Schuchardt
Dr. G. Schuchardt Göttingen
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
model
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Schuchardt)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a Dr. G. Schuchardt Göttingen microscope without a 5x objective and want to complete it with original parts
-
if you want to use this objective on a microscope from another manufacturer
-
...
-
if you own such an objective but it is in very poor condition and needs to be replaced
-
if you are looking for an objective for macro photography
-
if you are looking for a low-magnification objective for observing objects with external, side-mounted incident light
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99823
|
Nikon TMS / Labophot-2 Microscope Ph3 40 DL 0.55 LWD 160/0-2 Objective | 40x Phase Contrast with Long Working Distance and Correction Collar
|
|
Description of this part for the microscope.
Achromatic Nikon Ph3 DL 40x / 0.55 LWD microscope objective for brightfield and phase contrast, with 0 - 2.0 mm correction collar, for 160 mm tube length -
...
for inverted and upright biological microscopes, made in Japan.
Basic objective parameters:
Manufacturer: Nikon, Japan
Model: Ph3 40 DL 0.55 LWD 160/0-2
Magnification: 40x
Numerical aperture (N.A.): 0.55
Optical correction: achromat
Phase contrast: Ph3 DL - Ph3 indicates the size of the phase ring (requires a matching Ph3 annulus in the condenser), DL (Dark Low) means dark, i.e. positive phase contrast - the object appears darker than the background
Working distance (WD): ~2.1 - 2.5 mm - LWD (Long Working Distance)
Correction collar: compensates for cover glass or vessel bottom thickness in the range 0 - 2.0 mm
Cover glass: the objective can be used without a cover glass, with a standard cover glass approx. 0.17 mm thick, and also with specimens observed through the bottom of a Petri dish up to 2.0 mm thick
Immersion: no (dry objective)
Tube length: 160 mm
Parfocal length: 45 mm
Thread: RMS
Optics: CF (Nikon CF-160) - requires no compensating eyepiece and allows photography by direct projection
This objective is suitable for:
- inverted microscopes - observation through the bottom of a Petri dish or cell culture flask
- upright biological microscopes - observation of specimens with or without a cover glass
Phase contrast work requires a compatible phase contrast condenser or a slider with a phase contrast annulus.
Commonly used, inexpensive cover glasses are 0.17 mm thick mainly in theory. Even the standard for class #1.5 allows a range of 0.16 - 0.19 mm, and in cheap Chinese cover glasses you will find in practice pieces from approx. 0.13 to 0.25 mm, often not matching the thickness stated on the box. Only #1.5H (high precision) cover glasses have a guaranteed thickness of 0.170 mm with a tolerance of +/- 0.005 mm. Variation in cover glass thickness clearly degrades image contrast and resolution (spherical aberration). The correction collar fitted to the objective offered here lets you adjust the optics to the combined thickness of the cover glass and the medium layer beneath it. This compensates for most of the variation found in practice.
In addition, the correction collar of this objective can be set to "0" for work without a cover glass, or to large values (up to 2.0 mm) to adapt the optics to observation through a microscope slide (0.8 - 1.2 mm), a glass Petri dish (usually 1.5 - 2.0 mm - thicker dishes are outside the collar range) or a plastic Petri dish (usually approx. 1 mm, in the range 0.8 - 1.2 mm).
This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and uses objectives for 160 mm tube length with a parfocal length of 33, 37 or 45 mm. Some example microscopes are listed in the "compatibility" section, but the list is not complete.
Names, descriptions, terms, and search contexts under which this part is searched.
- Nikon TMS microscope repair parts
- Nikon TMS inverted microscope Ph3 40x LWD objective cell culture
- Nikon TMS inverses Mikroskop Phasenkontrast Objektiv 40x
- Nikon CF Ph3 DL 40x 0.55 LWD 160/0-2 objective Petri dish
- Nikon Ph3 DL 40x Objektiv Petrischale Korrekturring
- Nikon Labophot-2 phase contrast 40x objective correction collar
- Nikon Labophot-2 Phasenkontrast Objektiv 40x großer Arbeitsabstand
- objektiv fázový kontrast Nikon Ph3 DL 40x LWD
- objetivo contraste de fases Ph3 40x para microscopio PZO Biolar
- objetivo Nikon Ph3 40x LWD para microscopio LOMO Biolam
- obiettivo contrasto di fase 40x per microscopio PZO Biolar
- obiettivo Nikon Ph3 40x LWD per microscopio Carl Zeiss Jena Amplival
- Nikon buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
100 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Nikon
Nikon Instruments (Nikon Corp.)
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
TMS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Nikon)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if your microscope is missing a 40x objective - for brightfield or phase contrast
-
if you observe cell cultures, algae, protozoa or fungi in Petri dishes on an inverted microscope
-
...
-
if a standard 40x objective cannot focus through the thick bottom of a Petri dish or culture flask, or touches the vessel
-
if you want to observe living, unstained specimens in phase contrast
-
if you need an objective with correction for cover glass or vessel bottom thickness
-
if you work with specimens without a cover glass
-
if you want to photograph specimens by direct projection
-
if you already have such an objective, but it is damaged or of very poor quality
|
|
_M40x-0,65-210-RMS-metallurgical-microscope_IMG_20260125_144539_742.jpg)
_M100x-0,8-210-RMS-metallurgical-microscope_IMG_20260125_144711_124.jpg)
-Stereo_IMG_20260126_180118_036.jpg)
