Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

length: not sure (finite)
Focal length: not sure (vintage)
Immersion: yes, Oil

Description of this part for the microscope.

length: not sure (finite)
Focal length: not sure (vintage)
Immersion: no (dry, air)

Description of this part for the microscope.

sure (finite)
Focal length: not sure (vintage)
Immersion: no (dry, air)

Description of this part for the microscope.

20x / 0.45 oo/0.17-A
Color correction: Achromat
Numerical aperture: 0.45
Tube length: infinity
Focal length: not sure
Cover glass: 0.17 mm
Immersion: no
Thread: M25

This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases.

Description of this part for the microscope.

Achromat HI 100x / 1,25 oo/0.17-A
Color correction: Achromat
Numerical aperture: 1,25
Tube length: infinity
Focal length: not sure
Cover glass: 0.17 mm
Immersion: yes, oil
Thread: M25

This lens is often used with Leica microscopes (e.g., the DMLB, DMLS, or DM1000 models). It is often shorter than Leica objectives, but an extension adapter is used in these cases.

Description of this part for the microscope.

Hohlspiegelkondensor 10)
- Carl Zeiss Jena Apochromat 32x microscope objective

Model: Hohlspiegelkondensor 10
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Apochromat 32x 0.65 oo
Tube length: infinity
Magnification: 32x
Numerical aperture: 0.65
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Hohlspiegelkondensor 9)
- Carl Zeiss Jena Planachromat 4x microscope objective

Model: Hohlspiegelkondensor 9
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat K 4x/0,05 oo/0 oo/2
Tube length: infinity
Magnification: 4x
Numerical aperture: 0.05
Cover glass: no OR 2 mm
Type: EPI (reflected light)
Thread: M19
Info: this microscope objective can work in oo/0 mode or after unscrewing the upper lens in oo/2 mode (e.g. for a Petri dish or through a microscope slide)

Mirror objective slides / inserts are used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

in bright or dark fields

The objective lens is in excellent optical condition.

Description of this part for the microscope.

light in bright or dark fields

The objective lens is in excellent optical condition.

Description of this part for the microscope.

33 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast.

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective lens of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

Length: 160 mm
Focal Length: 33 mm
Thread: RMS

This objective was manufactured for microscopes:
- Junat-1P
- OPTA UShM-1
- Opta UM-301

but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO.

Description of this part for the microscope.

20x
Tube Length: 160 mm
Focal Length: 33 mm
Thread: RMS

This objective was manufactured for microscopes:
- Junat-1P
- OPTA UShM-1
- Opta UM-301

but was often used in Lomo Biolam microscopes due to their complete compatibility... however, these microscopes sometimes had poorly made threads, and some units were difficult to screw into the objective turret. Sometimes, you might encounter incorrect information claiming the manufacturer was LOMO.

Description of this part for the microscope.

mm
Focal length: 33 mm
Thread: RMS

This objective is an exact replica of the identical Carl Zeiss Jena objective.

Description of this part for the microscope.

Stereo objective microscope
- 1,25x magnification
- For the vintage stereo microscopes

Since the 1930s, Carl Zeiss Jena has produced many models and variants of stereo microscopes and this lens will fit the vast majority of them.

Description of this part for the microscope.

mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast. NOTE - this is not a "Phv" type contrast.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

mm
Thread: RMS
YOM: 1976

This lens was produced as an OEM for many vendors. It can be found without any manufacturer name (commonly found on Bresser Biolam microscopes), or with the "BoB" or "Fujiopt Tokyo" logo engraved on it.

Description of this part for the microscope.

Bresser Biolam microscopes
Magnification: 3.7x
Numerical Aperture: 0.11
Tube Length: 160 mm
Focal Length: 33 mm
Thread: RMS

Due to its superior optical quality, this objective is used for macro photography, especially for stacking images.

Description of this part for the microscope.

Hohlspiegelkondensor 12)
- Carl Zeiss Jena Planachromat 12,5x microscope objective

Model: Hohlspiegelkondensor 12
Color: Grey
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat 12,5x 0.25 oo/0
Tube length: infinity
Magnification: 12,5x
Numerical aperture: 0.25
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

Hohlspiegelkondensor 12)
- Carl Zeiss Jena Planachromat 10x microscope objective

Model: Hohlspiegelkondensor 12
Color: Black
Internal thread: M19

Objective:
---------
Manufacturer: Carl Zeiss Jena
Model: Planachromat 10x 0.20 oo/-
Tube length: infinity
Magnification: 10x
Numerical aperture: 0.20
Cover glass: no
Type: EPI (reflected light)
Thread: M19

This element is used for EPI observations in reflected light in microscopes with a suitable EPI illuminator (Auflichtkondensor) installed, e.g. Carl Zeiss Jena NF or NU / NU-2 and with Vertival, Epival, Epignost, BK 70x50 microscopes - although they are also available in versions supporting other objectives).

Description of this part for the microscope.

mm
Thread: RMS
YOM: 1985

Description of this part for the microscope.

40x
Numerical aperture: 0.75
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes, water immersion
Thread: RMS
YOM: 1991

Description of this part for the microscope.

Achromat
Numerical Aperture: 0.20
Tube Length: 160 mm
Focal Length: 33 mm
Immersion: No
Thread: RMS
YOM: 1991

NOTE - Although this is a plan achromatic objective, it does not require dedicated plan compensation optics (e.g., special eyepieces). This makes it very popular for macro photography ? it has a 9:1 magnification ratio, no distortion at the image edge, and operates in direct projection mode.

Description of this part for the microscope.

mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = negative (anoptral) phase contrast (yellow bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

This is an oil-immersion objective with a high numerical aperture. It is recommended for working with fluorescent light or for those whose primary magnification is around 40x, 45x, 50x, 55x, 60x, or 63x and who want to achieve the highest possible quality and detail visibility.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

fluorescence illumination.

Manufacturer: LOMO
Model: WI 40 0.75 L
Magnification: 40x
Numerical aperture: 0.75
Optical correction: achromat, optimized for fluorescence microscopy
Tube length: 160 mm
Focal length: approx. 33 mm
Immersion: water
Designation: L = luminescence
Thread: RMS
Year of manufacture: 1974

Despite the L designation, the objective can of course also be used with standard transmitted light illumination.

LOMO objectives marked with L luminescence differ from non-marked versions by:
- improved transmission in the UV and blue spectral range
- reduced autofluorescence of optical glass
- no or strongly reduced use of organic adhesives in the optical assembly

Description of this part for the microscope.

correction for fluorescence illumination.

Manufacturer: Lomo
Model: WI 30x0.90 L
Manufacturer code: O5V-30L
Magnification: 30x
Numerical aperture: variable from 0.65 to 0.90
Iris diaphragm: yes, built-in
Optical correction: achromat + fluorescence
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes, water
Cover glass: yes, 0.17 mm
Marking: "L" = luminescence
Thread: RMS
Year of manufacture: 1974

This is a rare, professional microscope objective with a very wide range of applications. Main features that make this objective exceptional:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (up to 0.90) provides high-resolution images
- Built-in iris diaphragm allows adjustment of the aperture

Despite the "L" marking, the objective can of course also be used with standard illumination.

LOMO objectives with the "L" luminescence marking differ from those without this symbol by:
- Improved transmission in the UV and blue spectral range
- Lower glass autofluorescence
- No or strongly reduced use of organic adhesives

Description of this part for the microscope.

correction for fluorescence illumination.

Manufacturer: Lomo
Model: APO-WI 60x1.0 D=0 L
Magnification: 60x
Numerical aperture: 1.0
Correction: Apochromat + fluorescence
Tube length: 160 mm (?)
Focal length: 33 mm (?)
Immersion: water
Cover slip: no (!)
Marking: "L" = luminescence
Marking: "D=0" = use without cover slip
Thread: RMS
Year of manufacture: 1975

Apochromatic objectives are known for exceptional color fidelity, significantly better than achromatic objectives.

This objective is extremely rare on the secondary market and highly professional. Key features:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (1.0) provides high-resolution images
- Use without cover slip allows, for example, direct placement of the objective inside a droplet with the sample to be observed

Despite the "L" marking, the objective can also be used with normal transmitted light illumination.

Lomo objectives marked "L" (luminescence) differ from those without this symbol by:
- Improved UV and blue light transmission
- Lower autofluorescence of the glass
- No or reduced use of organic adhesives in the optical assembly

Description of this part for the microscope.

compatible with microscopes designed for a 45 mm parfocal standard It is mounted between the objective and the nosepiece/revolver so that optical focus is maintained despite the additional mechanical extension.

Leitz PLEZY differs from extension adapters available on the market in that it features internal anti-reflective optics, ensuring that despite the mechanical extension of the focal length the image quality is not degraded.

Description of this part for the microscope.

immersion operation and with a phase contrast ring.

Manufacturer: Lomo
Model: APO-WI-F 70x1,23
Magnification: 70x
Numerical aperture: 1,23
Correction: Apochromat
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes - water
Cover glass: yes - thickness from 0.10 to 0.20 mm
Markings: APO = Apochromat, WI = water immersion, F = phase contrast
Thread: RMS
Year of production: 1972

Note: to work in phase contrast technology you need a Lomo KF-4 condenser (you can see it in the database under number 00653).

This is a professional microscope objective with a very wide range of applications. The main features that make this objective exceptional:
- water immersion is preferred by many users over oil immersion
- very high numerical aperture, allowing the objective to produce a high resolution image
- cover glass thickness correction ring

Standard biological objectives are designed to achieve the best image quality when the specimen is located under a cover glass with a thickness of 0.17 mm (hence the marking on objectives such as 160/0.17). Unfortunately inexpensive cover glasses often do not undergo strict production control and a single package may contain cover glasses with thicknesses of 0.14 mm or 0.19 mm, which reduces observation sharpness.
Thanks to the built-in cover glass thickness correction ring (abbreviated CGTCR, CGCC or CGCR) the objective can be adjusted for every specimen so that it operates optimally. This works even when the actual thickness of the cover glass is unknown, because the effect is simply visible and the adjustment can be done "by eye".

Although this objective is a so-called "short" objective, meaning with a parfocal length of 33 mm, after adding a 12 mm adapter (you can see it in the database under number 99140) it can be used with newer microscopes designed for objectives with a parfocal length of 45 mm.

The Lomo company produced adapters specifically for these objectives (converters) from RMS thread to M27 thread, which makes them a very attractive option for installation in modern Zeiss Axio series microscopes.

Description of this part for the microscope.

objective
Manufacturer name: Epi-Objektiv 18x/0.30 Trockensystem Tubus unendlich, 1940
Name used before 1940: Epi-Objektiv 9.7 Epi, 18 Met Trockensystem Tubus unendlich, 1937
Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm
Additional: the objective includes an insert that fits the EPI illuminator
Magnification (so called magnifier magnification): 18x
Numerical aperture: 0.30
Oil immersion: NO (dry objective)
Focal length: 13.8 mm

Compatibility:
- Carl Zeiss Jena EPI reflected light condenser W
- Carl Zeiss Jena EPI reflected light condenser WK
- Carl Zeiss Jena Metalliput metallurgical microscope
- Carl Zeiss Jena Met Mi IX metallurgical microscope

This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg).

When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 18x is obtained.
When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 9.7x.

Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 9.7 Epi, 18 Met.
a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm)
b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm).
In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided.

Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements.

Description of this part for the microscope.

objective
Manufacturer name: Epi-Objektiv 30x/0.40 Trockensystem Tubus unendlich, 1940
Name used before 1940: Epi-Objektiv 16/0.40 Trockensystem Tubus unendlich, 1937
Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm
Additional: the objective includes an insert that fits the EPI illuminator
Magnification (so called magnifier magnification): 30x
Numerical aperture: 0.40
Oil immersion: NO (dry objective)
Focal length: 8,1 mm

Compatibility:
- Carl Zeiss Jena EPI reflected light condenser W
- Carl Zeiss Jena EPI reflected light condenser WK
- Carl Zeiss Jena Metalliput metallurgical microscope
- Carl Zeiss Jena Met Mi IX metallurgical microscope

This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg).

When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 30x is obtained.
When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 16x.

Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 16 Epi, 30 Met.
a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm)
b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm).
In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided.

Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements.

Description of this part for the microscope.

objective
Manufacturer name: Epi-Objektiv 34/0.60 Trockensystem Tubus unendlich, 1939
Name used after 1940: Epi-Objektiv 60x/0.60 Trockensystem Tubus unendlich, 1940
Model: 62 0,60 Met / 34 0,60 Epi
Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm
Additional: the objective includes an insert that fits the EPI illuminator
Magnification (so called magnifier magnification): 62x
Numerical aperture: 0.60
Oil immersion: NO (dry objective)
Focal length: 4,1 mm

Compatibility:
- Carl Zeiss Jena EPI reflected light condenser W
- Carl Zeiss Jena EPI reflected light condenser WK
- Carl Zeiss Jena Metalliput metallurgical microscope
- Carl Zeiss Jena Met Mi IX metallurgical microscope

This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg).

When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 62x is obtained.
When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 34x.

Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 62 0,60 Met / 34 0,60 Epi.
a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm)
b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm).
In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided.

Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements.

Description of this part for the microscope.

objective
Manufacturer name: Epi-Objektiv 2.7/0.09 Trockensystem Tubus unendlich, 1937
Name used after 1940: Epi-Objektiv 5x/0.09 Trockensystem Tubus unendlich, 1940
Model: 5 Met / 2,7 Epi
Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm
Additional: the objective includes an insert that fits the EPI illuminator
Magnification (so called magnifier magnification): 5x
Numerical aperture: 0.09
Oil immersion: NO (dry objective)
Focal length: 50 mm

Compatibility:
- Carl Zeiss Jena EPI reflected light condenser W
- Carl Zeiss Jena EPI reflected light condenser WK
- Carl Zeiss Jena Metalliput metallurgical microscope
- Carl Zeiss Jena Met Mi IX metallurgical microscope

This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg).

When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 5x is obtained.
When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 2.7x.

Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 5 Met / 2,7 Epi.
a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm)
b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm).
In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided.

Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements.

Description of this part for the microscope.

160 mm
Focal Length: 45 mm
Cover Glass: no
Immersion: no
Thread: RMS
Info: Phv = phase contrast variable

It can be used with any microscope from any manufacturer, along with a compatible Phv phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

mm
Focal Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

08 160/-
Color correction: Planachromat
Numerical aperture: 0.08
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

Description of this part for the microscope.

160 mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Phv = phase contrast variable

It can be used with any microscope from any manufacturer, along with a compatible Phv phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

Description of this part for the microscope.

Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: no
Thread: RMS
Info: Ph = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: Ph3 = phase contrast

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm.

Description of this part for the microscope.

03
Magnification: 32x
Correction: achromat
Numerical aperture: 0.4
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 1 mm (!)
Immersion: no
Thread: RMS
Ph1: phase contrast
LD: "long distance" meaning long working distance

Note: this is an objective for an inverted microscope, therefore it is corrected for observation through a 1.0 mm cover glass

It can be used with any inverted microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

It can very likely also be used with other inverted Zeiss microscopes (e.g. Axiovert 25).

Description of this part for the microscope.

06
Magnification: 20x
Correction: achromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 2 mm (!)
Immersion: no
Thread: RMS
Ph1: phase contrast
LD: "long distance" meaning long working distance

Note: this is an objective for an inverted microscope, therefore it is corrected for observation through a 2.0 mm cover glass

It can be used with any inverted microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

It can very likely also be used with other inverted Zeiss microscopes (e.g. Axiovert 25).

Description of this part for the microscope.

9904
Magnification: 10x
Correction: achromat
Numerical aperture: 0.22
Tube length: 160 mm
Focal length: 45 mm
Cover glass: indifferent
Immersion: no
Thread: RMS
Ph1: phase contrast

This specific unit was used in an inverted Zeiss ID 02 microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes.

Objectives with such low magnification (here 10x) can be used without a cover glass, with a cover glass, or for observation through thicker glass (e.g. through a Petri dish), therefore they can be used both in upright and inverted microscopes.

It can be used with any microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).

Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).

VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.

Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.

It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

10 160/-
Color correction: Planachromat
Numerical aperture: 0.10
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking.

Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics.

A microscope objective with such low magnification is used, among others, in the following fields:
- tissue overview examination in pathomorphology
- observation of insects
- observation of minerals
- observation of inclusions in amber
- handwriting analysis
- observation of micromollusks
- and many others

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

Color correction: Planachromat
Numerical aperture: 0.25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.32
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 0.65
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: no
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

17
Color correction: Planachromat
Numerical aperture: 1,25
Tube length: 160 mm
Focal length: 45 mm
Cover glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS
Info: HI = Homogene Immersion, also oil immersion

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

3x
Model: Semiplan 6.3/0.16 160/-
Color correction: Semi-Planachromat
Numerical aperture: 0.16
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS

This is one of the most commonly used microscope objectives for macro photography and focus stacking.

Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

industrial objective for cameras with C-mount thread.

Description of this part for the microscope.

06 oo/-A
Magnification: 3.2x
Numerical aperture N.A.: 0.006
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: not required, may be present or not
Immersion: no

This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar

For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2

The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.

An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.

Description of this part for the microscope.

25 oo/-A
Magnification: 12,5x
Numerical aperture N.A.: 0.25
Optical correction: planachromatic
Additional: "GF" = Grossfeld, meaning a wide field objective
Tube length: infinity
Thread: M25
Cover glass: not required, may be present or not
Immersion: no

This objective fits, among others, the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar

For the Carl Zeiss Jena Jenamed microscope, this objective fits every variant:
- Carl Zeiss Jena Jenamed variant
- Carl Zeiss Jena Jenamed Fluorescence
- Carl Zeiss Jena Jenamed hematology
- Carl Zeiss Jena Jenamed cytology
- Carl Zeiss Jena Jenamed 2

The best image quality and full performance of this objective are achieved when using a Carl Zeiss Jena microscope head supporting 30 mm eyepieces and eyepieces marked "GF", meaning - similarly to the objectives - wide field eyepieces.

An interesting fact is that I very often see this objective (as well as other Carl Zeiss Jena objectives with M25 thread) mounted in Leica microscopes (for example Leica DMLB or Leica DMLS). Carl Zeiss Jena objectives are slightly shorter than Leica ones, so users apply extension adapters in such cases.