A complete list (Page 2) of components and service parts for microscopes located in our database.

This is description of this part:

This head fits the Nikon Eclipse E800 microscopes and those versions of the Eclipse E1000 that do not have the large camera attachment.

Photo output: C-mount
Eyepiece diameter: 30 mm

This microscope head is, of course, in very good mechanical and optical condition.

What is this part needed for?

• if your microscope is missing a microscope head
• if you have a binocular head without a camera output
• if your head is damaged
• if you need a binocular head for your astronomical telescope

What category does this part belong to?

Heads [ link ] [More Heads]

Who manufactures this part?

• Nikon - Nikon Instruments (Nikon Corp.) [ link ] [More from Nikon]

What microscope does this part come from?

Mikroskop Nikon Eclipse E800 [ link ] [More from Eclipse E800]

What microscopes or components is this part compatible with?

• Nikon Eclipse E800
• Nikon Eclipse E1000

Names, descriptions, terms, and search contexts under which this part is searched.

• Nikon Eclipse E800 microscope repair parts
• Nikon Eclipse E800 Trinokularkopf ergonomisch kippbar
• Nikon Eclipse E800 ergonomic tilting trinocular head
• Nikon Eclipse E1000 trino head C-mount camera
• Nikon E800 Tubus Kamera Anschluss C-Mount
• Nikon Eclipse E800 head prism dirty - double image
• Nikon E1000 Trinokularkopf Ersatz
• trinokulární hlavice Nikon Eclipse E800
• cabezal trinocular ergonómico Nikon Eclipse E800
• cabezal para cámara Nikon Eclipse E1000
• testata trinoculare ergonomica Nikon Eclipse E800
• testata per fotocamera Nikon Eclipse E1000
• Nikon buy spare parts

This is description of this part:

A very rare microscope objective with 45x magnification and a parfocal length of 45 mm.

Manufacturer: Hertel & Reuss
Magnification: 45x
Numerical aperture: 0.65
Cover glass: yes, 0.17 mm
Thread: RMS
Tube length: 160 mm
Focal length: 45 mm
Immersion: no

What is this part needed for?

• This is a very rare lens
• if your microscope is missing a 40x / 45x lens
• if you have a 40x / 45x lens that is damaged or in poor condition
• if you have a microscope from any manufacturer that supports TL=160 FL=45 lenses, this is also a lens for you

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Hertel & Reuss - Hertel & Reuss Kassel (West Germany) [ link ] [More from Hertel & Reuss]
• H&R
• Hertel und Reuss
• Hertel & Reuss Optik Kassel

What microscope does this part come from?

Mikroskop Hertel & Reuss Labopan [ link ] [More from Labopan]

What microscopes or components is this part compatible with?

• Hertel & Reuss Labopan
• Hertel & Reuss Superpan

Names, descriptions, terms, and search contexts under which this part is searched.

• Hertel & Reuss Labopan microscope repair parts
• Hertel & Reuss Superpan 45x Objektiv FFS
• Hertel & Reuss Labopan 45x microscope objective
• Hertel & Reuss FFS 45x RMS Objektiv 45 mm
• Hertel & Reuss FFS 45x objective 160 mm rare
• Hertel & Reuss Labopan Objektiv Ersatz
• Hertel & Reuss 45x Frontlinse zerkratzt - Ersatz
• objektiv Hertel & Reuss FFS 45x
• objetivo Hertel & Reuss FFS 45x
• objetivo 45x para microscopio Hertel & Reuss Labopan
• obiettivo Hertel & Reuss FFS 45x
• obiettivo 45x per microscopio Hertel & Reuss Labopan
• Hertel & Reuss buy spare parts

This is description of this part:

A small bottle of immersion oil.

This is an original, vintage Leitz bottle from 1962. It contains the original immersion oil, which - great thing - is still in a liquid state.

Of course, the oil is usable, but I think this item has more collector's value.

What is this part needed for?

• primarily for collections
• you can also simply use this oil

What category does this part belong to?

Accessories [ link ] [More Accessories]

Who manufactures this part?

• Leitz - Leitz Wetzlar [ link ] [More from Leitz]
• Leitz Wetzlar, West Germany
• E. Leitz Wetzlar GmbH
• Ernst Leitz Wetzlar

What microscope does this part come from?

Mikroskop Leitz SM [ link ] [More from SM]

What microscopes or components is this part compatible with?

• Leitz SM
• Leitz HM-LUX 3
• Leitz Laborlux S
• Leitz Laborlux 11 Pol S
• Leitz Wetzlar microscope

Names, descriptions, terms, and search contexts under which this part is searched.

• Leitz SM microscope repair parts
• Leitz Immersionsöl Original 1962
• vintage Leitz immersion oil bottle 1962
• Leitz SM / Laborlux S Immersionsöl
• Leitz HM-LUX 3 immersion oil for oil objectives
• Leitz Immersionsöl Sammlerstück
• Leitz Öl für 100x Ölimmersion Objektiv
• olejek immersyjny Leitz do kolekcji
• imerzní olej Leitz 1962
• aceite de inmersión original Leitz
• aceite de inmersión antiguo Leitz Wetzlar
• olio a immersione originale Leitz
• olio a immersione d'epoca Leitz Wetzlar
• Leitz buy spare parts

This is description of this part:

This is the lower part of a gray Carl Zeiss West Germany binocular head for Standard 14 microscope.

- Right angle prism/mirror prism/mirror
- Dovetail/mounting connector for the microscope body
- Dovetail connector diameter: 43 mm
- Lower bottom lens

Here is the same part, but without the screws.

Sorry, I don't know the part number. It's a binocular head mounted on Carl Zeiss Standard 14 and Standard 16 microscopes.

What is this part needed for?

• if your head is delaminating, chipped, cracked, scratched, or discolored on the prism
• if the mirror surface is oxidized
• if the lower bottom lens is cracked
• if fungus (mold) has destroyed the anti-reflective surface
• if your dovetail is damaged

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Zeiss - Carl Zeiss West Germany [ link ] [More from Zeiss]
• Carl Zeiss West
• Carl Zeiss West Germany
• Opton

What microscope does this part come from?

Mikroskop Zeiss Standard 14 [ link ] [More from Standard 14]

What microscopes or components is this part compatible with?

• Zeiss Standard 14
• Zeiss Standard GFL
• Zeiss Zeiss Standard microscope binocular head
• Zeiss Standard WL
• Zeiss Standard 16

Names, descriptions, terms, and search contexts under which this part is searched.

• Zeiss Standard 14 microscope repair parts
• jaskółczy ogon głowicy Zeiss Standard 14
• Zeiss Standard Binokularkopf Umlenk Spiegel Prisma Linse
• Zeiss Standard 14 Binokularkopf Umlenkprisma mit Linse Nr. 2
• Zeiss Standard 14 binocular head mirror prism with dovetail No. 2
• Zeiss Standard GFL / WL Bino Kopf Umlenkprisma mit Linse Nr. 2
• Zeiss Standard 16 binocular head mirror prism with dovetail No. 2 replacement
• Zeiss Standard Binokular Doppelbild - Prisma Ersatz
• Zeiss Standard binocular head prism misaligned - replacement
• hranol binokulární hlavice Zeiss Standard 14
• prisma cabezal binocular Zeiss Standard 14
• repuesto cabezal binocular Zeiss Standard
• prisma testata binoculare Zeiss Standard 14
• ricambio testata binoculare Zeiss Standard
• Zeiss buy spare parts

This is description of this part:

This is a prism for the right (R) eyepiece for the gray binocular head of the Carl Zeiss West Germany Standard 14 microscope.

I apologize, but I don't know the P/N number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads?but it definitely doesn't fit the 473012-9902.

What is this part needed for?

• if your head is delaminating, chipped, cracked, scratched, or discolored on the prism
• if the mirror surface is oxidized
• if fungus (mold) has destroyed the anti-reflective surface

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Zeiss - Carl Zeiss West Germany [ link ] [More from Zeiss]
• Carl Zeiss West
• Carl Zeiss West Germany
• Opton

What microscope does this part come from?

Mikroskop Zeiss Standard 14 [ link ] [More from Standard 14]

What microscopes or components is this part compatible with?

• Zeiss Standard 14
• Zeiss Standard GFL
• Zeiss Zeiss Standard microscope binocular head
• Zeiss Standard WL
• Zeiss Standard 16

Names, descriptions, terms, and search contexts under which this part is searched.

• Zeiss Standard 14 microscope repair parts
• Zeiss Standard Binokularkopf Umlenk Spiegel Prisma Linse
• Zeiss Standard 14 Binokularkopf Okularprisma rechts
• Zeiss Standard 14 binocular head right eyepiece mirror prism
• Zeiss Standard GFL / WL Bino Kopf Okularprisma rechts
• Zeiss Standard 16 binocular head right eyepiece mirror prism replacement
• Zeiss Standard Binokular Prisma Pilz - Ersatz
• Zeiss Standard binocular right prism delamination - replacement
• pravý hranol okuláru binokulární hlavice Zeiss Standard 14
• prisma derecho del ocular cabezal binocular Zeiss Standard 14
• repuesto cabezal binocular Zeiss Standard
• prisma destro oculare testata binoculare Zeiss Standard 14
• ricambio testata binoculare Zeiss Standard
• Zeiss buy spare parts

This is description of this part:

This is a prism for the left (L) eyepiece for the gray binocular head of the Carl Zeiss West Germany Standard 14 microscope.

I apologize, but I don't know the P/N number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads - but it definitely doesn't fit the 473012-9902.

What is this part needed for?

• if your head is delaminating, chipped, cracked, scratched, or discolored on the prism
• if the mirror surface is oxidized
• if fungus (mold) has destroyed the anti-reflective surface

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Zeiss - Carl Zeiss West Germany [ link ] [More from Zeiss]
• Carl Zeiss West
• Carl Zeiss West Germany
• Opton

What microscope does this part come from?

Mikroskop Zeiss Standard 14 [ link ] [More from Standard 14]

What microscopes or components is this part compatible with?

• Zeiss Standard 14
• Zeiss Standard GFL
• Zeiss Zeiss Standard microscope binocular head
• Zeiss Standard WL
• Zeiss Standard 16

Names, descriptions, terms, and search contexts under which this part is searched.

• Zeiss Standard 14 microscope repair parts
• Zeiss Standard Binokularkopf Umlenk Spiegel Prisma Linse
• Zeiss Standard 14 Binokularkopf Okularprisma links
• Zeiss Standard 14 binocular head left eyepiece mirror prism
• Zeiss Standard GFL / WL Bino Kopf Okularprisma links
• Zeiss Standard 16 binocular head left eyepiece mirror prism replacement
• Zeiss Standard Binokular Prisma Pilz - Ersatz
• Zeiss Standard binocular left prism delamination - replacement
• levý hranol okuláru binokulární hlavice Zeiss Standard 14
• prisma izquierdo del ocular cabezal binocular Zeiss Standard 14
• repuesto cabezal binocular Zeiss Standard
• prisma sinistro oculare testata binoculare Zeiss Standard 14
• ricambio testata binoculare Zeiss Standard
• Zeiss buy spare parts

This is description of this part:

This is a tube-shaped lens assembly that is placed under the right eyepiece - in front of the mirror prism to the gray binocular head of the Carl Zeiss West Germany Standard 14 microscope

I apologize, but I don't know the P/N number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads - but it definitely doesn't fit the 473012-9902.

What is this part needed for?

• if your head has delamination, chipping, cracking, scratching, or discoloration of the lenses
• if fungus (mold) has damaged the anti-reflective surface

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Zeiss - Carl Zeiss West Germany [ link ] [More from Zeiss]
• Carl Zeiss West
• Carl Zeiss West Germany
• Opton

What microscope does this part come from?

Mikroskop Zeiss Standard 14 [ link ] [More from Standard 14]

What microscopes or components is this part compatible with?

• Zeiss Standard 14
• Zeiss Standard GFL
• Zeiss Zeiss Standard microscope binocular head
• Zeiss Standard WL
• Zeiss Standard 16

Names, descriptions, terms, and search contexts under which this part is searched.

• Zeiss Standard 14 microscope repair parts
• Zeiss Standard Binokularkopf Umlenk Spiegel Prisma Linse
• Zeiss Standard 14 Binokularkopf Hilfslinse rechts
• Zeiss Standard 14 binocular head auxiliary lens for right eyepiece prism
• Zeiss Standard GFL / WL Bino Kopf Hilfslinse rechts
• Zeiss Standard 16 binocular head auxiliary lens for right eyepiece prism replacement
• Zeiss Standard Binokular Linse Pilz - Ersatz
• Zeiss Standard binocular auxiliary lens fungus - replacement
• pomocná čočka binokulární hlavice Zeiss Standard 14
• lente auxiliar cabezal binocular Zeiss Standard 14
• repuesto cabezal binocular Zeiss Standard
• lente ausiliaria testata binoculare Zeiss Standard 14
• ricambio testata binoculare Zeiss Standard
• Zeiss buy spare parts

This is description of this part:

This is the main angular mirror prism from the large, black Lomo AU-26 binocular microscope head.

Typically, in other heads, such prisms are mounted with the head's mounting (usually a dovetail of various sizes). In this case, this is not the case, as the magnification changer is located below the prism, not directly on the mounting socket.

What is this part needed for?

• if your head is delaminating, chipped, cracked, scratched, or discolored on the prism
• if the mirror surface is oxidized
• if fungus (mold) has destroyed the anti-reflective surface

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Element Lomo AU-26 binocular head [ link ]

What microscopes or components is this part compatible with?

• Lomo AU-26 binocular head
• Lomo ML-2
• Lomo MBB-1
• Lomo Biolam-M
• Lomo Biolam D11
• Lomo Metam
• Lomo Biolam

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo AU-26 binocular head microscope repair parts
• Lomo AU-26 Umlenk Spiegel Prisma Linse
• Lomo AU-26 Binokularkopf unteres Umlenkprisma
• Lomo AU-26 binocular head bottom angle mirror prism
• Lomo Biolam AU-26 Bino Kopf unteres Umlenkprisma
• Bresser Biolam binocular head bottom angle mirror prism
• Lomo Biolam-M / D11 AU-26 Kopf Ersatzteil
• Lomo Metam / ML-2 binocular head repair
• Lomo AU-26 Prisma Pilz - Ersatz
• Lomo AU-26 prism delamination - replacement
• ЛОМО АУ-26 бинокулярная насадка
• spodní hranol binokulární hlavice Lomo AU-26
• prisma inferior cabezal binocular Lomo AU-26
• repuesto cabezal para microscopio Lomo Biolam
• prisma inferiore testata binoculare Lomo AU-26
• ricambio testata per microscopio Lomo Biolam
• Lomo buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 100/1.3 OI PhS 160/0.17
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1.30
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 100/1.3 OI PhS 160/0.17
• PZO 100/1.3 OI PhS 160/0.17 Objektiv
• PZO 100x Öl positiver Phasenkontrast Objektiv
• PZO Biolar positiver Phasenkontrast Objektiv 100x
• PZO 100x positive phase contrast oil objective 45 mm
• PZO Studar / MB-30 positive phase contrast oil objective 100x
• PZO K3Ph Kondensor positiver Phasenkontrast Objektiv 100x
• kontrast fazowy PZO PhS
• PZO 100x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 100x
• objetivo contraste de fases PZO 100x
• objetivo 100x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 100x
• obiettivo 100x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

A small bottle of immersion oil.

This is an original, vintage Lomo bottle. It contains the original immersion oil, which - great thing - is still in a liquid state.

Of course, the oil is usable, but I think this item has more collector's value.

What is this part needed for?

• primarily for collections
• you can also simply use this oil

What category does this part belong to?

Accessories [ link ] [More Accessories]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo MBI-1
• Lomo Biolam D11
• Lomo M-9
• Lomo MIN-8
• Carl Zeiss Jena Polmi A
• Lomo Biolam
• Lomo Lumam R1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• Lomo Immersionsöl Original
• vintage Lomo immersion oil bottle
• Lomo Biolam Immersionsöl
• Lomo MBI-1 / Biolam D11 immersion oil
• Lomo Immersionsöl Sammlerstück
• Lomo Öl für 100x Ölimmersion Objektiv
• olejek immersyjny Lomo do kolekcji
• imerzní olej LOMO
• aceite de inmersión original Lomo
• aceite de inmersión para microscopio Lomo Biolam
• olio a immersione originale Lomo
• olio a immersione per microscopio Lomo Biolam
• Lomo buy spare parts

This is description of this part:

This is the main, central, right-angled mirror prism from the large, black Lomo AU-26 binocular microscope head. This is the prism located under the model name plate.

What is this part needed for?

• if your head is delaminating, chipped, cracked, scratched, or discolored on the prism
• if the mirror surface is oxidized
• if fungus (mold) has destroyed the anti-reflective surface

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Element Lomo AU-26 binocular head [ link ]

What microscopes or components is this part compatible with?

• Lomo AU-26 binocular head
• Lomo MBB-1
• Lomo Biolam-M
• Lomo Biolam D11
• Lomo Metam
• Lomo Biolam
• Lomo ML-2

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo AU-26 binocular head microscope repair parts
• Lomo AU-26 Umlenk Spiegel Prisma Linse
• Lomo AU-26 Binokularkopf zentrales Umlenkprisma
• Lomo AU-26 binocular head central angle mirror prism
• Lomo Biolam AU-26 Bino Kopf zentrales Umlenkprisma
• Bresser Biolam binocular head central angle mirror prism
• Lomo Biolam-M / D11 AU-26 Kopf Ersatzteil
• Lomo Metam / ML-2 binocular head repair
• Lomo AU-26 Prisma Pilz - Ersatz
• Lomo AU-26 prism delamination - replacement
• ЛОМО АУ-26 бинокулярная насадка
• centrální hranol binokulární hlavice Lomo AU-26
• prisma central cabezal binocular Lomo AU-26
• repuesto cabezal para microscopio Lomo Biolam
• prisma centrale testata binoculare Lomo AU-26
• ricambio testata per microscopio Lomo Biolam
• Lomo buy spare parts

This is description of this part:

This external Hertel & Reuss illuminator is used to illuminate both mirror microscopes, simple stereo microscopes, and advanced microscopes like the STE-6.

Modell: STELA

The unit offered here was used with a Carl Zeiss Stereomicroscope II microscope (as seen in the last photo).

It originally used an incandescent bulb, but over the years, someone replaced it with an LED and connected a transformer. It has a bracket that allows for mounting to virtually any microscope.

What is this part needed for?

• If you want a nice hammer colored illuminator for your microscope

What category does this part belong to?

Illuminators [ link ] [More Illuminators]

Who manufactures this part?

• Hertel & Reuss - Hertel & Reuss Kassel (West Germany) [ link ] [More from Hertel & Reuss]
• H&R
• Hertel und Reuss
• Hertel & Reuss Optik Kassel

What microscope does this part come from?

Mikroskop Hertel & Reuss STE-6 [ link ] [More from STE-6]

What microscopes or components is this part compatible with?

• Hertel & Reuss STE-6
• Zeiss Stereomikroskop II

Names, descriptions, terms, and search contexts under which this part is searched.

• Hertel & Reuss STE-6 microscope repair parts
• Hertel & Reuss STELA LED Beleuchtung Stereomikroskop
• Hertel & Reuss STELA LED illuminator for stereo microscope
• Hertel & Reuss STE-6 Auflicht LED Lampe
• Zeiss Stereomikroskop II LED Beleuchtung extern
• Hertel & Reuss STELA microscope LED lamp replacement
• oświetlacz mikroskopowy LED Hertel & Reuss STELA
• LED osvětlení Hertel & Reuss STELA
• iluminador LED Hertel & Reuss STELA
• lámpara LED para microscopio estéreo Hertel & Reuss
• illuminatore LED Hertel & Reuss STELA
• lampada LED per stereomicroscopio Hertel & Reuss
• Hertel & Reuss buy spare parts

This is description of this part:

A simple polarization kit for monocular microscopes. This kit can be used with microscopes from any manufacturer.

Manufacturer: Hertel & Reuss
Name: simple polarization kit
Intended for: monocular biological microscopes
Type: for working with transmitted light

This allows you to view objects in polarized transmitted light, which produces very beautiful effects, for example, when observing descaling agent, vitamin C, or sand.

The kit includes:
- a polarizer that attaches to the light source
- an analyzer that attaches to the eyepiece

NOTE: Make sure the eyepiece diameter is suitable for mounting the analyzer.

What is this part needed for?

• If you want to start your adventure with observations in polarized light on your microscope

What category does this part belong to?

Extras [ link ] [More Extras]

Who manufactures this part?

• Hertel & Reuss - Hertel & Reuss Kassel (West Germany) [ link ] [More from Hertel & Reuss]
• H&R
• Hertel und Reuss
• Hertel & Reuss Optik Kassel

What microscope does this part come from?

Mikroskop Hertel & Reuss Studio C [ link ] [More from Studio C]

What microscopes or components is this part compatible with?

• Hertel & Reuss Studio C
• Carl Zeiss Jena Lg
• Carl Zeiss Jena Eduval
• PZO Studar
• Lomo Biolam
• Lomo Biolam D11
• Hertel & Reuss CN-fl
• Hertel & Reuss Primus
• Will Wetzlar V200
• Will Wetzlar V100
• Leitz HM-LUX 3
• Eschenbach Kolleg SH45

Names, descriptions, terms, and search contexts under which this part is searched.

• Hertel & Reuss Studio C microscope repair parts
• Hertel & Reuss Polarisation Set einfach
• Hertel & Reuss simple polarization kit for monocular microscope
• Hertel & Reuss Studio C / CN-fl Polarisator Analysator
• Hertel & Reuss Primus polarizer analyzer set
• Lomo Biolam einfache Polarisation nachrüsten
• Carl Zeiss Jena Lg / Eduval polarization kit
• PZO Studar Polarisationsfilter Set
• polarizační sada Hertel & Reuss
• kit de polarización Hertel & Reuss
• polarización para microscopio Lomo Biolam
• kit di polarizzazione Hertel & Reuss
• polarizzazione per microscopio Carl Zeiss Jena Lg
• Hertel & Reuss buy spare parts

This is description of this part:

The metal plate with the model name is the cover, under which the main prism is located. The plate also contains the serial number.

What is this part needed for?

• For those who have this plate, but it's damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Element Lomo AU-26 binocular head [ link ]

What microscopes or components is this part compatible with?

• Lomo AU-26 binocular head
• Lomo ML-2

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo AU-26 binocular head microscope repair parts
• tabliczka znamionowa Lomo AU-26
• Lomo AU-26 Typenschild Metallplatte
• Lomo AU-26 binocular head model nameplate cover
• Lomo AU-26 Prismenabdeckung mit Seriennummer
• Lomo ML-2 AU-26 head cover plate
• Lomo AU-26 Abdeckung fehlt - Ersatz
• sowjetischer Mikroskopkopf Lomo AU-26 Restaurierung
• štítek Lomo AU-26
• placa con modelo Lomo AU-26
• tapa del cabezal binocular Lomo AU-26
• targhetta Lomo AU-26
• coperchio testata binoculare Lomo AU-26
• Lomo buy spare parts

This is description of this part:

Complete mechanism with two prisms. This is the front part of the Lomo AU-26 microscope head, the part where the eyepiece tubes are screwed in.

- Complete interpupillary distance adjustment mechanism
- Right and left angled eyepiece prisms

If you need smaller, individual components of this module (e.g., a knob, a single prism, a fragment of the mechanism?anything) - contact us

What is this part needed for?

• if one of the prisms is damaged, e.g., chipped, the mirror is oxidized, or delamination has occurred.
• if the prism holders are broken.
• if the thread into which the eyepiece tubes are screwed is damaged.
• if the interpupillary distance adjustment mechanism is damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Element Lomo AU-26 binocular head [ link ]

What microscopes or components is this part compatible with?

• Lomo AU-26 binocular head
• Lomo ML-2

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo AU-26 binocular head microscope repair parts
• regulacja źrenic Lomo AU-26
• Lomo AU-26 Augenabstand Mechanismus mit Prismen
• Lomo AU-26 interpupillary distance mechanism with prisms
• Lomo AU-26 Okularprismen vorne
• Lomo ML-2 AU-26 angled prisms eyepiece tubes
• Lomo AU-26 Augenabstand klemmt - neufetten
• Lomo AU-26 IPD stiff - regrease
• sowjetischer Binokularkopf Lomo AU-26 Reparatur
• mechanismus rozteče očí Lomo AU-26
• mecanismo de distancia interpupilar Lomo AU-26
• prismas del cabezal binocular Lomo AU-26
• meccanismo distanza interpupillare Lomo AU-26
• prismi testata binoculare Lomo AU-26
• Lomo buy spare parts

This is description of this part:

Precision measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: PZO
Model: K15x
Magnification: 15x
Image: micrometer and X-crosshair
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide. The entire unit is housed in an original wooden box.

The kit includes a slide with a standard micrometer scale to calibrate this eyepiece at any magnification.

Identical K15x eyepieces were also made by other manufacturers, such as Lomo and Carl Zeiss Jena.

What is this part needed for?

• if you need to make precise measurements on your microscope, surface defects, spores, crystals and everything else

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Metaval
• Carl Zeiss Jena Epityp-2
• Carl Zeiss Jena Epignost
• Carl Zeiss Jena Telaval
• Carl Zeiss Jena Technival-2
• Lomo ML-2
• Carl Zeiss Jena Citoval-2
• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MET-3
• Lomo Biolam
• Zeiss Standard 14
• Zeiss Standard WL
• Zeiss Universal
• Hertel & Reuss Metall
• Will Wetzlar V300
• Leitz Laborlux S
• Leitz Laborlux 11 Pol S
• Vickers M72

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• PZO K15x Messokular mit Skala
• PZO K15x measuring eyepiece micrometer 23.2 mm
• PZO Biolar Messokular 15x
• Carl Zeiss Jena Amplival / Vertival measuring eyepiece 15x
• Lomo Biolam Messokular 15x
• Carl Zeiss Jena Epignost / Metaval micrometer eyepiece
• PZO K15x Okular Strichplatte fokussierbar
• okulár s měřítkem PZO K15x
• ocular micrométrico PZO K15x
• ocular de medición para microscopio PZO Biolar
• oculare micrometrico PZO K15x
• oculare di misura per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

This is called a "filter ring" - a circle with four filters, with the fifth slot empty. This is the small filter mounted under the head.

NOTE - this is not the "larger" circle with mirror filters that is built into the head.

Installed filters:
- yellow
- red
- green
- blue
- empty slot

What is this part needed for?

• if your microscope is missing this part
• if the filters in your microscope are damaged
• if you want to use these filters in a DIY project of your own

What category does this part belong to?

Filters [ link ] [More Filters]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo MIN-8 Filterrevolver klein
• Lomo MIN-8 polarising microscope small filter ring wheel
• Lomo MIN 8 Polarisationsmikroskop Filterrad unter dem Kopf
• Lomo MIN8 filter ring with four filters
• Lomo MIN-8 Filterrad fehlt - Ersatz
• mikroskop polaryzacyjny Lomo MIN-8
• ЛОМО МИН-8 светофильтры
• kolo filtrů Lomo MIN-8
• rueda de filtros microscopio polarizante Lomo MIN-8
• repuesto microscopio petrográfico Lomo MIN-8
• ruota filtri microscopio polarizzatore Lomo MIN-8
• ricambio microscopio petrografico Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 20/0,40 PhS 160/0.17
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhS = positive phase contrast (gray bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 20/0.40 PhS 160/0.17
• PZO 20/0.40 PhS 160/0.17 Objektiv
• PZO 20x positiver Phasenkontrast Objektiv
• PZO Biolar positiver Phasenkontrast Objektiv 20x
• PZO 20x positive phase contrast objective 45 mm
• PZO Studar / MB-30 positive phase contrast objective 20x
• PZO K3Ph Kondensor positiver Phasenkontrast Objektiv 20x
• kontrast fazowy PZO PhS
• PZO 20x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 20x
• objetivo contraste de fases PZO 20x
• objetivo 20x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 20x
• obiettivo 20x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 20/0,40 PhA
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = negative (anoptral) phase contrast (yellow bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.

After installing the 12 mm adapter, this objective lens will have FL = 45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO MB-10 [ link ] [More from MB-10]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Lumipan
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)
• PZO MB-10
• Lomo MBB-1
• Lomo Biolam
• Lomo M-9
• IOR ML-4M

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO MB-10 microscope repair parts
• obiektyw mikroskopowy PZO 20/0.40 PhA
• PZO 20/0.40 PhA Objektiv
• PZO 20x Anoptral Phasenkontrast Objektiv 33 mm
• PZO MB-10 anoptral phase contrast objective 20x
• Lomo Biolam PhA 20x Objektiv
• Bresser Biolam Anoptral Objektiv 20x
• Carl Zeiss Jena Lumipan anoptral phase objective 20x
• PZO K3Ph Kondensor PhA Objektiv 20x
• kontrast fazowy anoptralny PZO
• PZO 20x PhA Objektiv Pilz - Ersatz
• objektiv anoptrální fázový kontrast PZO 20x
• objetivo contraste de fases anoptral PZO 20x
• objetivo 20x para microscopio Lomo Biolam
• obiettivo contrasto di fase anoptrale PZO 20x
• obiettivo 20x per microscopio Carl Zeiss Jena Lumipan
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 10/0,24 Ph 160/-
Magnification: 10x
Correction: Achromat
Numerical Aperture: 0,24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: no
Immersion: no
Thread: RMS
Info: Ph = Zernike phase contrast (green bar).

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

Info: Ph (Zernike) objectives produce an exceptionally nice image with a bluish background when used with KS phase contrast condensers from the PZO MB-30S microscope.

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 10/0.24 Ph 160/-
• PZO 10/0.24 Ph 160/- Objektiv
• PZO 10x Zernike Phasenkontrast Objektiv
• PZO Biolar Zernike Phasenkontrast Objektiv 10x
• PZO 10x Zernike phase contrast objective 45 mm
• PZO Studar / MB-30 Zernike phase contrast objective 10x
• PZO K3Ph Kondensor Zernike Phasenkontrast Objektiv 10x
• kontrast fazowy PZO Ph
• PZO 10x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 10x
• objetivo contraste de fases PZO 10x
• objetivo 10x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 10x
• obiettivo 10x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: GS (Gillett & Sibert)
Model: FLAT 10/0.25 160/-
Magnification: 10x
Correction: Plan-Achromat
Numerical Aperture: 0.25
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• GS - Gillett & Sibert London, England [ link ] [More from GS]
• GS London
• Gillett & Sibert London
• Gillett & Sibert
• Gillett and Sibert

What microscope does this part come from?

Mikroskop GS Lablynx [ link ] [More from Lablynx]

What microscopes or components is this part compatible with?

• GS Lablynx
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• Carl Zeiss Jena Nf
• Olympus CH-2 CHT
• PZO Biolar
• Lomo Biolam
• Zeiss Standard 14
• Zeiss Standard GFL
• Will Wetzlar V300
• Leitz HM-LUX 3
• Vickers M72

Names, descriptions, terms, and search contexts under which this part is searched.

• GS Lablynx microscope repair parts
• GS 10x Mikroskop Objektiv
• GS FLAT 10/0.25 160/- Objektiv
• Gillett & Sibert FLAT 10/0.25 160/- microscope objective
• GS Lablynx Planachromat Objektiv 10x
• Gillett Sibert plan achromat flat objective 10x 160 mm
• Carl Zeiss Jena Amplival / Ergaval 10x Objektiv Ersatz
• Olympus CH-2 10x objective replacement
• Zeiss Standard 14 10x RMS Objektiv
• GS 10x Objektiv Pilz - Ersatz
• objektiv GS Gillett & Sibert 10x
• objetivo GS Gillett & Sibert 10x
• objetivo 10x para microscopio PZO Biolar
• obiettivo GS Gillett & Sibert 10x
• obiettivo 10x per microscopio PZO Biolar
• GS buy spare parts

This is description of this part:

Manufacturer: GS (Gillett & Sibert)
Model: 100/1.30 160/OIL
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1,30
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• GS - Gillett & Sibert London, England [ link ] [More from GS]
• GS London
• Gillett & Sibert London
• Gillett & Sibert
• Gillett and Sibert

What microscope does this part come from?

Mikroskop GS Lablynx [ link ] [More from Lablynx]

What microscopes or components is this part compatible with?

• GS Lablynx
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• Carl Zeiss Jena Nf
• Olympus CH-2 CHT
• PZO Biolar
• Lomo Biolam
• Zeiss Standard 14
• Zeiss Standard GFL
• Will Wetzlar V300
• Leitz HM-LUX 3
• Vickers M72

Names, descriptions, terms, and search contexts under which this part is searched.

• GS Lablynx microscope repair parts
• GS 100x Mikroskop Objektiv
• GS 100/1.30 160/Oil Objektiv
• Gillett & Sibert 100/1.30 160/Oil microscope objective
• GS Lablynx Ölimmersion Objektiv 100x
• Gillett Sibert oil immersion objective 100x 160 mm
• Carl Zeiss Jena Amplival / Ergaval 100x Objektiv Ersatz
• Olympus CH-2 100x objective replacement
• Zeiss Standard 14 100x RMS Objektiv
• GS 100x Objektiv Pilz - Ersatz
• objektiv GS Gillett & Sibert 100x
• objetivo GS Gillett & Sibert 100x
• objetivo 100x para microscopio PZO Biolar
• obiettivo GS Gillett & Sibert 100x
• obiettivo 100x per microscopio PZO Biolar
• GS buy spare parts

This is description of this part:

Manufacturer: GS (Gillett & Sibert)
Model: FL 55/0.95 160/OIL
Magnification: 55x
Correction: Fluor
Numerical Aperture: 0,95
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: yes, 0,17 mm
Immersion: yes, oil
Thread: RMS

This is an oil-immersion objective with a high numerical aperture. It is recommended for working with fluorescent light or for those whose primary magnification is around 40x, 45x, 50x, 55x, 60x, or 63x and who want to achieve the highest possible quality and detail visibility.

It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• GS - Gillett & Sibert London, England [ link ] [More from GS]
• GS London
• Gillett & Sibert London
• Gillett & Sibert
• Gillett and Sibert

What microscope does this part come from?

Mikroskop GS Lablynx [ link ] [More from Lablynx]

What microscopes or components is this part compatible with?

• GS Lablynx
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• Carl Zeiss Jena Nf
• Olympus CH-2 CHT
• PZO Biolar
• Lomo Biolam
• Zeiss Standard 14
• Zeiss Standard GFL
• Will Wetzlar V300
• Leitz HM-LUX 3
• Vickers M72

Names, descriptions, terms, and search contexts under which this part is searched.

• GS Lablynx microscope repair parts
• GS 55x Mikroskop Objektiv
• GS FL 55/0.95 160/Oil Objektiv
• Gillett & Sibert FL 55/0.95 160/Oil microscope objective
• GS Lablynx Fluorit Öl Objektiv 55x
• Gillett Sibert fluorite oil objective 55x 160 mm
• Carl Zeiss Jena Amplival / Ergaval 55x Objektiv Ersatz
• Olympus CH-2 55x objective replacement
• Zeiss Standard 14 55x RMS Objektiv
• GS 55x Objektiv Pilz - Ersatz
• objektiv GS Gillett & Sibert 55x
• objetivo GS Gillett & Sibert 55x
• objetivo 55x para microscopio PZO Biolar
• obiettivo GS Gillett & Sibert 55x
• obiettivo 55x per microscopio PZO Biolar
• GS buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 20/0,40 PhA 160/0.17
Type: Fully silver, thick case.
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 20/0.40 PhA 160/0.17
• PZO 20/0.40 PhA 160/0.17 Objektiv
• PZO 20x Anoptral Phasenkontrast Objektiv
• PZO Biolar Anoptral Phasenkontrast Objektiv 20x
• PZO 20x anoptral phase contrast objective 45 mm
• PZO Studar / MB-30 anoptral phase contrast objective 20x
• PZO K3Ph Kondensor Anoptral Phasenkontrast Objektiv 20x
• PZO PhA silver thick case
• kontrast fazowy anoptralny PZO
• PZO 20x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 20x
• objetivo contraste de fases PZO 20x
• objetivo 20x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 20x
• obiettivo 20x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 20/0,40 PhA 160/0.17
Type: All-silver casing, slim.
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 20/0.40 PhA 160/0.17
• PZO 20/0.40 PhA 160/0.17 Objektiv
• PZO 20x Anoptral Phasenkontrast Objektiv
• PZO Biolar Anoptral Phasenkontrast Objektiv 20x
• PZO 20x anoptral phase contrast objective 45 mm
• PZO Studar / MB-30 anoptral phase contrast objective 20x
• PZO K3Ph Kondensor Anoptral Phasenkontrast Objektiv 20x
• PZO PhA silver slim case
• kontrast fazowy anoptralny PZO
• PZO 20x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 20x
• objetivo contraste de fases PZO 20x
• objetivo 20x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 20x
• obiettivo 20x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 10/0,24 PhA 160/-
Type: All-silver casing, slim.
Magnification: 10x
Correction: Achromat
Numerical Aperture: 0,24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (-)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 10/0.24 PhA 160/-
• PZO 10/0.24 PhA 160/- Objektiv
• PZO 10x Anoptral Phasenkontrast Objektiv
• PZO Biolar Anoptral Phasenkontrast Objektiv 10x
• PZO 10x anoptral phase contrast objective 45 mm
• PZO Studar / MB-30 anoptral phase contrast objective 10x
• PZO K3Ph Kondensor Anoptral Phasenkontrast Objektiv 10x
• PZO PhA silver slim case
• kontrast fazowy anoptralny PZO
• PZO 10x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 10x
• objetivo contraste de fases PZO 10x
• objetivo 10x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 10x
• obiettivo 10x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 10/0,24 PhA 160/0
Type: Housing with black ring at the bottom
Magnification: 10x
Correction: Achromat
Numerical Aperture: 0,24
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: nein (0)
Immersion: no
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 10/0.24 PhA 160/0
• PZO 10/0.24 PhA 160/0 Objektiv
• PZO 10x Anoptral Phasenkontrast Objektiv
• PZO Biolar Anoptral Phasenkontrast Objektiv 10x
• PZO 10x anoptral phase contrast objective 45 mm
• PZO Studar / MB-30 anoptral phase contrast objective 10x
• PZO K3Ph Kondensor Anoptral Phasenkontrast Objektiv 10x
• PZO PhA black ring housing
• kontrast fazowy anoptralny PZO
• PZO 10x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 10x
• objetivo contraste de fases PZO 10x
• objetivo 10x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 10x
• obiettivo 10x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Manufacturer: PZO Poland
Model: 100/1.3 OI PhA 160/0.17
Magnification: 100x
Correction: Achromat
Numerical Aperture: 1.30
Tube Length: 160 mm
Focal Length: 45 mm
Cover Glass: 0.17 mm
Immersion: Yes, oil immersion
Thread: RMS
Info: PhA = anoptral phase contrast (gray band).

Note: The yellow band sometimes turns orange over time.

Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL

This objective lens is in excellent condition, with no signs of use. It's difficult to find an objective of this quality on the used parts market.

It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you're cautious and want to have a spare objective lens

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MS4
• PZO ML4
• PZO ML6
• PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• obiektyw mikroskopowy PZO 100/1.3 OI PhA 160/0.17
• PZO 100/1.3 OI PhA 160/0.17 Objektiv
• PZO 100x Öl Anoptral Phasenkontrast Objektiv
• PZO Biolar Anoptral Phasenkontrast Objektiv 100x
• PZO 100x anoptral phase contrast oil objective 45 mm
• PZO Studar / MB-30 anoptral phase contrast oil objective 100x
• PZO K3Ph Kondensor Anoptral Phasenkontrast Objektiv 100x
• kontrast fazowy anoptralny PZO
• PZO 100x Ph Objektiv Pilz - Ersatz
• objektiv fázový kontrast PZO 100x
• objetivo contraste de fases PZO 100x
• objetivo 100x para microscopio PZO Biolar
• obiettivo contrasto di fase PZO 100x
• obiettivo 100x per microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Lomo Polarizing Microscope Objective. The lens was manufactured at the Progress factory - that's why the lens has a logo other than Lomo.

Perfect external condition and perfect optical condition. It's difficult to find a lens in this condition on the used market.

Manufacturer: Lomo
Magnification: 40x
Model: 40 0.65 P
Numerical Aperture: 0.65
Tube: 160 mm
Focal Length: 33 mm
Cover Glass: Yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This objective is designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a suitable insert, allowing it to be used with Lomo Polam, Lomo MIN-1 / Lomo MIN-6 / Lomo MIN-8 microscopes. Of course, the objective can be unscrewed and a different objective screwed into the insert.

The Pol adapter also allows you to center the objective lens along the entire optical path - but this requires tools.

Note: I've seen numerous reports claiming this RMS-Pol adapter is compatible with Leitz Wetzlar polarizing microscopes - but I haven't personally verified it.

What is this part needed for?

• If you have a polarisation microscope and need an objective lens with this magnification
• If you only need a slider to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MIN-6
• Lomo MIN-1
• Lomo Polam R-113
• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo Polam R-311

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo Progress P 40 0.65 Pol Objektiv
• Lomo 40 0.65 P polarizing objective with Pol RMS adapter
• Lomo MIN-8 / MIN-6 Polarisationsmikroskop Objektiv
• Lomo Polam R-113 / L-211 Pol objective 40x
• Lomo petrographic microscope objective 40x strain free
• Progress Werk Pol Objektiv 40x
• obiektyw mikroskopowy polaryzacyjny Lomo 40x
• ЛОМО П 40 0.65 объектив
• polarizační objektiv Lomo 40x
• objetivo de polarización Lomo 40x
• objetivo Pol microscopio petrográfico Lomo MIN-8
• obiettivo polarizzazione Lomo 40x
• obiettivo Pol microscopio petrografico Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

Manufacturer: Leitz Wetzlar
Model: 170/0.17 Oel 100:1 A 1.30
Manufacturer's Objective Number: 1/12
Magnification: 100x
Color Correction: Achromat
Numerical Aperture: 1.30
Tube Length: 170 mm
Focal Length: 37 mm
Cover Glass: Yes, 0.17 mm
Immersion: Yes, oil
Thread: RMS

What is this part needed for?

• If you have a microscope without objectives and need to restock it using original parts
• If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
• If you have such an objective lens, but it's of very poor quality or damaged
• If you want to keep such an objective lens as a spare

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Leitz - Leitz Wetzlar [ link ] [More from Leitz]
• Leitz Wetzlar, West Germany
• E. Leitz Wetzlar GmbH
• Ernst Leitz Wetzlar

What microscope does this part come from?

Mikroskop Leitz SM [ link ] [More from SM]

What microscopes or components is this part compatible with?

• Hertel & Reuss Studio C
• Hertel & Reuss CN-fl
• Steinmar Berlin Binocular biological
• Steindorff Berlin Model S
• Steindorff Berlin Model M.Y.
• Steindorff Berlin Model C.Y.N.

Names, descriptions, terms, and search contexts under which this part is searched.

• Leitz SM microscope repair parts
• Leitz Wetzlar 100x microscope objective
• Leitz Wetzlar Oel 100:1 170/0.17 A 1.30 Objektiv
• Leitz 1/12 Ölimmersion Objektiv 100x RMS 170 mm
• vintage Leitz 1/12 oil immersion objective
• Leitz SM 100x Öl Objektiv 37 mm
• Hertel & Reuss Studio C 100x oil objective 170 mm
• Steindorff Model S 100x Objektiv
• Leitz 100x Öl Frontlinse zerkratzt - Ersatz
• objektiv 100x olejová imerze Leitz Wetzlar
• objetivo 100x inmersión Leitz Wetzlar 1/12
• objetivo 100x para microscopio Leitz SM
• obiettivo 100x ad immersione Leitz Wetzlar 1/12
• obiettivo 100x per microscopio Leitz SM
• Leitz buy spare parts

This is description of this part:

The Ploemopak (in various versions) is an EPI fluorescence device for Leitz Wetzlar microscopes.

I'm offering a Ploemopak for the Leitz Wetzlar Ortholux II microscope here.

- Ploemopak
- Revolver for four RMS objectives
- Carousel with excitation filters
- Built-in barrier filter cubes in the turret
- Built-in iris diaphragm (*)
- Mounting adapter for the arm

(*) The iris diaphragm opens and closes nicely, but when I look at it, I'm not entirely sure if it's assembled correctly. However, it works very well.

All filters and mirrors are functional, with no delamination.

What is this part needed for?

• if you want to use EPI fluorescence in your Leitz Ortholux II microscope
• if you have an incomplete microscope set and are missing this part
• if you already have a Ploemopak, but it's damaged or in very poor condition
• if you have a Ploemopak but someone has removed the filters
• if you want this device as a spare part
• if you're building your own FL observation device

What category does this part belong to?

Revolvers (turrets) [ link ] [More Revolvers (turrets)]

Who manufactures this part?

• Leitz - Leitz Wetzlar [ link ] [More from Leitz]
• Leitz Wetzlar, West Germany
• E. Leitz Wetzlar GmbH
• Ernst Leitz Wetzlar

What microscope does this part come from?

Mikroskop Leitz Ortholux II [ link ] [More from Ortholux II]

What microscopes or components is this part compatible with?

• Leitz Ortholux II

Names, descriptions, terms, and search contexts under which this part is searched.

• Leitz Ortholux II microscope repair parts
• mikroskop fluorescencyjny Leitz Ortholux II
• Leitz Ortholux II Fluoreszenzmikroskop
• fluoreszenzwurfel Leitz Ploemopak
• Leitz Ploemopak Auflicht Fluoreszenz Revolver
• Leitz Ortholux II Ploemopak EPI fluorescence filter turret
• Leitz Ploemopak Filterwürfel Revolver Ortholux
• Leitz Ploemopak fluorescence cubes replacement
• fluorescenční Ploemopak Leitz Ortholux II
• Ploemopak de fluorescencia Leitz Ortholux II
• revólver de filtros de fluorescencia Leitz
• Ploemopak a fluorescenza Leitz Ortholux II
• revolver filtri fluorescenza Leitz
• Leitz buy spare parts

This is description of this part:

Used Mitutoyo micrometer head in excellent cosmetic and technical condition

Manufacturer: Mitutoyo Corporation
Model: 152-389
Movement range: 0-25 mm
Accuracy: 0.0005 mm

The head comes from a Mitutoyo Toolmakers TM-101 microscope

What is this part needed for?

• If the micrometer head on your microscope stage is missing or damaged
• If you need high-precision movement, e.g., for extreme macro photography
• If you need precise movement in any other device

What category does this part belong to?

Other [ link ] [More Other]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• głowica mikrometryczna Mitutoyo 152-389
• stolik mikrometryczny Mitutoyo
• Mitutoyo 152-389 Mikrometerkopf 0-25 mm 0.0005 mm
• Mitutoyo 152-389 micrometer head 0-25 mm
• Mitutoyo TM-101 Messtisch Mikrometerkopf
• Mitutoyo TM-101 stage micrometer head replacement
• Mitutoyo micrometer head for extreme macro focus stacking rail
• Mitutoyo Mikrometerkopf DIY Makro Schlitten
• mikrometrická hlava Mitutoyo 152-389
• cabezal micrométrico Mitutoyo 152-389
• micrómetro para microscopio de taller Mitutoyo TM-101
• testina micrometrica Mitutoyo 152-389
• micrometro per microscopio da officina Mitutoyo TM-101
• Mitutoyo buy spare parts

This is description of this part:

Measuring eyepiece element - service part - for Mitutoyo TM-101 microscope

What is this part needed for?

• as a service item / repair part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• mikroskop warsztatowy Mitutoyo TM-101
• Mitutoyo TM-101 toolmakers microscope
• Mitutoyo TM-101 Messokular Bauteil
• Mitutoyo TM-101 micrometer eyepiece service element
• Mitutoyo TM-101 Werkzeugmikroskop Ersatzteil
• Mitutoyo TM-101 measuring microscope repair part
• Mitutoyo TM-101 Messokular defekt - Ersatz
• díl měřicího okuláru Mitutoyo TM-101
• pieza del ocular micrométrico Mitutoyo TM-101
• repuesto microscopio de taller Mitutoyo
• parte dell'oculare micrometrico Mitutoyo TM-101
• ricambio microscopio da officina Mitutoyo
• Mitutoyo buy spare parts

This is description of this part:

Hensoldt Wetzlar microscope objective lens from the DIAMI microscope (the version with the "classic" revolver).

Manufacturer: Hensoldt Wetzlar
Model: 60:1 E
Magnification: 60x
Numerical Aperture: (?)
Cover Glass: (?)
Thread: RMS
Tube Lens: (?)
Focal Lens: 45 mm
Immersion: (?)

I have very little technical information about this objective; I don't even know what the red letter "E" stands for. If you have any information that would help me add to the description, please E-mail me.

In 1950, Hensoldt DIAMI microscopes with a star-shaped nosepiece were already using objectives with a 45 mm parfocal length, but they still looked like the shorter, older versions. This is already a newer version of the objective, differing among other things in that it does not have the numerical aperture value engraved on it.

In a 1950 brochure, the manufacturer states that optional equipment for reflected-light EPI work was available for the Hensoldt DIAMI microscope. Therefore, it is possible that the red letter "E" on the objective indicates an EPI objective. However, this possibility is contradicted by the fact that the 1950 model, which was designed only for transmitted-light work, had a 100x objective that also had the letter "E" engraved on it.

What is this part needed for?

• if you have such a Vintage microscope and you want to complete it using original parts

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Hensoldt Wetzlar - M. Hensoldt & Söhne Optische Werke AG Wetzlar, Germany [ link ] [More from Hensoldt Wetzlar]

What microscope does this part come from?

Mikroskop Hensoldt Wetzlar DIAMI [ link ] [More from DIAMI]

What microscopes or components is this part compatible with?

• Hensoldt Wetzlar DIAMI

Names, descriptions, terms, and search contexts under which this part is searched.

• Hensoldt Wetzlar DIAMI microscope repair parts
• Hensoldt Wetzlar DIAMI 60x Objektiv
• Hensoldt Wetzlar 60:1 E Objektiv 60x RMS
• Hensoldt DIAMI 60x microscope objective
• Hensoldt Wetzlar DIAMI Mikroskop Objektiv Ersatz
• Hensoldt DIAMI objective replacement 45 mm
• Hensoldt Wetzlar 60x Frontlinse zerkratzt - Ersatz
• Hensoldt 60x objective fungus - replacement
• Hensoldt Wetzlar Sammlerstück Objektiv
• objektiv 60x Hensoldt Wetzlar DIAMI
• objetivo 60x Hensoldt Wetzlar DIAMI
• objetivo de microscopio antiguo Hensoldt Wetzlar
• obiettivo 60x Hensoldt Wetzlar DIAMI
• obiettivo microscopio d'epoca Hensoldt Wetzlar
• Hensoldt Wetzlar buy spare parts

This is description of this part:

4-position turret for the Olympus BHM metallurgical microscope. The turret is interchangeable and mounts on a dovetail. It has a reflector inside for use with EPI darkfield objectives.

Number of ports: 4
Objective thread: M25
Objective type: Olympus NEO
Mounting method: Dovetail

I've also used the Olympus BHM microscope with Carl Zeiss Jena M25 thread objectives (Jenaval microscope objectives), and they fit and work very well :-)

I'm almost certain (but I haven't checked) that this turret fits the Olympus BH model (but not the BH-2), which has a turret for RMS objectives by default. However, it can be swapped out and work with an M25 objective :)

What is this part needed for?

• if you have a microscope without a turret
• if your turret is damaged
• if you want to have more than one turret to quickly switch between entire sets of objectives
• if you have an Olympus BH microscope and want to work with M25 lenses

What category does this part belong to?

Revolvers (turrets) [ link ] [More Revolvers (turrets)]

Who manufactures this part?

• Olympus - Olympus Corporation Tokyo Japan [ link ] [More from Olympus]
• Olympus Tokyo
• Olympus Japan
• Olympus Tokyo Japan
• Olympus Optical Co., Ltd.
• Olympus Corporation.

What microscope does this part come from?

Mikroskop Olympus BHM [ link ] [More from BHM]

What microscopes or components is this part compatible with?

• Olympus BHM
• Olympus BH

Names, descriptions, terms, and search contexts under which this part is searched.

• Olympus BHM microscope repair parts
• miska obiektywowa Olympus BHM
• Olympus BH revolver
• Olympus BH objective turret
• Olympus BHM metallurgical microscope
• Olympus BHM Objektivrevolver 4-fach M25 Auflicht
• Olympus BHM 4-position nosepiece M25 dovetail
• Olympus BHM Revolver mit Reflektor Dunkelfeld
• Olympus BH-M reflected light brightfield darkfield turret
• Olympus BHM Revolver rastet nicht ein - Ersatz
• revolverový nosič objektivů Olympus BHM M25
• revólver portaobjetivos M25 Olympus BHM
• revólver campo oscuro microscopio metalográfico Olympus
• revolver portaobiettivi M25 Olympus BHM
• revolver campo scuro microscopio metallografico Olympus
• Olympus buy spare parts

This is description of this part:

Compensating Slider for the QUARTZ RED I Polarizing/Petrographic Microscope

The slider I'm offering here is from the Lomo MIN-8 microscope, but I understand it also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

What is this part needed for?

• If you have a polarizing microscope and you are missing the Quartz Red I slider

What category does this part belong to?

Sliders [ link ] [More Sliders]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MIN-6
• Lomo MIN-1
• Lomo Polam R-113
• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo Polam R-311

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo Quarz Rot I Kompensator Schieber
• Lomo quartz red I compensator slider
• Lomo MIN-8 / MIN-6 Polarisationsmikroskop Kompensator
• Lomo Polam R-113 / L-211 petrographic compensator slider
• Lomo Polam LMPR Kompensator Schieber
• Lomo MIN-1 polarizing microscope compensator
• Lomo Kompensator fehlt - Ersatz
• kompenzátor červeň I Lomo MIN-8
• compensador rojo de primer orden Lomo MIN-8
• compensador microscopio petrográfico Lomo Polam
• compensatore rosso di primo ordine Lomo MIN-8
• compensatore microscopio petrografico Lomo Polam
• Lomo buy spare parts

This is description of this part:

Compensating Slider for the 1/4 Lambda / quarter wavelength Polarizing/Petrographic Microscope

The slider I'm offering here is from the Lomo MIN-8 microscope, but I understand it also fits the MIN-1, MIN-6, and Lomo Polam series microscopes.

Note: I've seen numerous reports claiming that Lomo sliders are compatible with Leitz Wetzlar polarizing microscopes, but I haven't personally verified this.

What is this part needed for?

• If you have a polarizing microscope and you are missing the quarter wavelength slide

What category does this part belong to?

Sliders [ link ] [More Sliders]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MIN-6
• Lomo MIN-1
• Lomo Polam R-113
• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo Polam R-311

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo Lambda/4 Kompensator Schieber
• Lomo quarter-wave plate compensator slider
• Lomo MIN-8 / MIN-6 Polarisationsmikroskop Kompensator
• Lomo Polam R-113 / L-211 petrographic compensator slider
• Lomo Polam LMPR Kompensator Schieber
• Lomo MIN-1 polarizing microscope compensator
• Lomo Kompensator fehlt - Ersatz
• čtvrtvlnná destička Lomo MIN-8
• lámina de cuarto de onda Lomo MIN-8
• compensador microscopio petrográfico Lomo Polam
• lamina a quarto d'onda Lomo MIN-8
• compensatore microscopio petrografico Lomo Polam
• Lomo buy spare parts

This is description of this part:

This aluminum nameplate (sticker) is placed on the microscope body and very often falls off, so many microscopes are missing it.

What is this part needed for?

• This aluminum nameplate (sticker) is placed on the microscope body and very often falls off, so many microscopes are missing it.

What category does this part belong to?

Stickers (nameplates) [ link ] [More Stickers (nameplates)]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Mikroskop Carl Zeiss Jena Technival [ link ] [More from Technival]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Technival

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Technival microscope repair parts
• Carl Zeiss Jena Technival Stereomikroskop Typenschild
• Carl Zeiss Jena Technival stereo microscope nameplate with magnifications
• Carl Zeiss Jena Technival Vergrößerungstabelle Schild
• Technival Typenschild fehlt - Ersatz
• Technival nameplate fell off - replacement
• štítek Carl Zeiss Jena Technival
• placa con aumentos Carl Zeiss Jena Technival
• placa de aluminio microscopio estéreo Carl Zeiss Jena
• targhetta con ingrandimenti Carl Zeiss Jena Technival
• targhetta in alluminio stereomicroscopio Carl Zeiss Jena
• Carl Zeiss Jena buy spare parts

This is description of this part:

Here I'm offering the original magnification knob, with three screws securing it to the microscope body and an aluminum cap with the magnifications printed on it.

The Carl Zeiss Jena Technival stereomicroscope has two such knobs ? one on each side of the body. They are identical, and there's no difference between left and right.

The aluminum cap must be removed to attach the knob. After that, it must be glued back on.

What is this part needed for?

• as a repair part to be replaced, as this knob often crumbles, breaks or even melts when burned with a cigarette

What category does this part belong to?

Housings and its parts [ link ] [More Housings and its parts]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Mikroskop Carl Zeiss Jena Technival [ link ] [More from Technival]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Technival

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Technival microscope repair parts
• Carl Zeiss Jena Technival Vergrößerungswechsel Knopf
• Carl Zeiss Jena Technival magnification changer knob
• Carl Zeiss Jena Technival Stereomikroskop Zoom Knopf mit Kappe
• Technival Vergrößerungsknopf fehlt - Ersatz
• Technival magnification knob missing - replacement
• knoflík změny zvětšení Carl Zeiss Jena Technival
• mando cambio de aumentos Carl Zeiss Jena Technival
• repuesto microscopio estéreo Carl Zeiss Jena Technival
• manopola cambio ingrandimento Carl Zeiss Jena Technival
• ricambio stereomicroscopio Carl Zeiss Jena Technival
• Carl Zeiss Jena buy spare parts

This is description of this part:

A set of knobs for focusing/moving the microscope up and down. These knobs are mounted on a pinion with a gear. This mechanism moves on a rack mounted on a stand.

What is this part needed for?

• as a repair part to be replaced, as this knob often crumbles, breaks or even melts when burned with a cigarette.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Mikroskop Carl Zeiss Jena Technival [ link ] [More from Technival]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Technival

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Technival microscope repair parts
• Carl Zeiss Jena Technival Fokussierknöpfe Grobtrieb
• Carl Zeiss Jena Technival stereo microscope focusing knobs pinion
• Carl Zeiss Jena Technival Triebknöpfe mit Ritzel
• Technival Fokussierung rutscht durch - Ersatz
• Technival focus slipping - knobs replacement
• knoflíky ostření Carl Zeiss Jena Technival
• mandos de enfoque Carl Zeiss Jena Technival
• repuesto enfoque microscopio estéreo Carl Zeiss Jena
• manopole messa a fuoco Carl Zeiss Jena Technival
• ricambio messa a fuoco stereomicroscopio Carl Zeiss Jena
• Carl Zeiss Jena buy spare parts

This is description of this part:

Measuring eyepiece element - service part - for Mitutoyo TM-101 microscope

What is this part needed for?

• as a service item / repair part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• mikroskop warsztatowy Mitutoyo TM-101
• Mitutoyo TM-101 toolmakers microscope
• Mitutoyo TM-101 Okular Mikrometer Glasplatte
• Mitutoyo TM-101 eyepiece micrometer glass reticle
• Mitutoyo TM-101 Werkzeugmikroskop Ersatzteil
• Mitutoyo TM-101 measuring microscope repair part
• Mitutoyo TM-101 Messokular defekt - Ersatz
• skleněná měřicí destička okuláru Mitutoyo TM-101
• retícula de vidrio del ocular Mitutoyo TM-101
• repuesto microscopio de taller Mitutoyo
• reticolo in vetro dell'oculare Mitutoyo TM-101
• ricambio microscopio da officina Mitutoyo
• Mitutoyo buy spare parts

This is description of this part:

Measuring eyepiece element - service part - head cover for Mitutoyo TM-101 microscope

What is this part needed for?

• as a service item / repair part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• mikroskop warsztatowy Mitutoyo TM-101
• Mitutoyo TM-101 toolmakers microscope
• Mitutoyo TM-101 Okularkopf Abdeckung
• Mitutoyo TM-101 eyepiece head cover
• Mitutoyo TM-101 Werkzeugmikroskop Ersatzteil
• Mitutoyo TM-101 measuring microscope repair part
• Mitutoyo TM-101 Messokular defekt - Ersatz
• kryt hlavy okuláru Mitutoyo TM-101
• tapa del cabezal del ocular Mitutoyo TM-101
• repuesto microscopio de taller Mitutoyo
• coperchio testata oculare Mitutoyo TM-101
• ricambio microscopio da officina Mitutoyo
• Mitutoyo buy spare parts

This is description of this part:

This is the main (and only) prism of the Mitutoyo TM-101 toolmakers microscope. This prism transfers the image from the objective lens to the eyepiece head.

The prism is mounted on a metal plate with a threaded mounting for the objective lens.

What is this part needed for?

• as a service item / repair part

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• mikroskop warsztatowy Mitutoyo TM-101
• Mitutoyo TM-101 toolmakers microscope
• Mitutoyo TM-101 toolmakers microscope prism
• Mitutoyo TM-101 Hauptprisma Okular Objektiv
• Mitutoyo TM-101 main eyepiece objective prism
• Mitutoyo TM-101 Prisma Pilz - Ersatz
• Mitutoyo TM-101 prism delamination - replacement
• hranol Mitutoyo TM-101
• prisma principal Mitutoyo TM-101
• repuesto microscopio de taller Mitutoyo
• prisma principale Mitutoyo TM-101
• ricambio microscopio da officina Mitutoyo
• Mitutoyo buy spare parts

This is description of this part:

This is the main toothed rack of the vertical movement (coarse focus) of the Mitutoyo TM-101 workshop microscope stand.

What is this part needed for?

• as a service item / repair part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Mitutoyo - Mitutoyo Corporation [ link ] [More from Mitutoyo]

What microscope does this part come from?

Mikroskop Mitutoyo TM-101 [ link ] [More from TM-101]

What microscopes or components is this part compatible with?

• Mitutoyo TM-101

Names, descriptions, terms, and search contexts under which this part is searched.

• Mitutoyo TM-101 microscope repair parts
• mikroskop warsztatowy Mitutoyo TM-101
• Mitutoyo TM-101 toolmakers microscope
• Mitutoyo TM-101 Werkzeugmikroskop
• Mitutoyo TM-101 Grobtrieb Zahnstange
• Mitutoyo TM-101 vertical coarse focus rack
• Mitutoyo TM-101 Fokussierung rutscht durch - Zahnstange
• Mitutoyo TM-101 focus rack worn - replacement
• ozubená lišta ostření Mitutoyo TM-101
• cremallera de enfoque Mitutoyo TM-101
• repuesto microscopio de taller Mitutoyo
• cremagliera messa a fuoco Mitutoyo TM-101
• ricambio microscopio da officina Mitutoyo
• Mitutoyo buy spare parts

This is description of this part:

AO Spencer (American Optical) Microscope Objective

Manufacturer: AO Spencer
Model: 45x NA..66
Manufacturer Number: CAT. 1116
Magnification: 45x
Numerical Aperture: 0.66
Cover Glass: 0.17 mm
Thread: RMS
Tube Lens: infinity
Focal Lens: : 34 mm
Immersion: no

This particular objective was unscrewed from an AO Spencer 1036a microscope - but this microscope is most likely the same as the AO One-Ten model

What is this part needed for?

• if you have such a Vintage microscope and you want to complete it using original parts

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• AO Spencer - American Optical Spencer [ link ] [More from AO Spencer]
• AO Spencer
• AO
• Spencer
• American Optical Spencer
• American Optical
• Reichert

What microscope does this part come from?

Mikroskop AO Spencer 1036a [ link ] [More from 1036a]

What microscopes or components is this part compatible with?

• AO Spencer 1036a
• AO One-Ten

Names, descriptions, terms, and search contexts under which this part is searched.

• AO Spencer 1036a microscope repair parts
• AO Spencer 45x Mikroskop Objektiv
• AO Spencer 45x NA 0.66 CAT. 1116 Objektiv
• American Optical 45x microscope objective Cat. 1116
• AO Spencer 1036a 45x Objektiv Ersatz
• American Optical One-Ten 45x objective
• AO Microstar 110 microscope objective 45x
• AO Spencer 45x Frontlinse zerkratzt - Ersatz
• objektiv AO Spencer 45x
• objetivo AO Spencer 45x American Optical
• objetivo 45x microscopio American Optical One-Ten
• obiettivo AO Spencer 45x American Optical
• obiettivo 45x microscopio American Optical One-Ten
• AO Spencer buy spare parts

This is description of this part:

Microscope condenser for the American Optical 10 microscope, also fits 110/120.

More information is here .

Manufacturer: American Optical (AO)
Model: Aspheric
Description: American Optical Aspheric N.A. 1.25 CAT. 1084
Numerical Aperture: 1.25
Iris diaphragm: yes
Wide-field lens: yes
Accessories: Slide-in slot

What is this part needed for?

• if you have a classic condenser and want to improve image quality
• if your microscope condenser is damaged
• if you want to adapt this excellent condenser to your microscope from another manufacturer

What category does this part belong to?

Condensers [ link ] [More Condensers]

Who manufactures this part?

• AO - American Optical [ link ] [More from AO]
• AO Spencer
• AO
• Spencer
• American Optical Spencer
• American Optical
• Reichert

What microscope does this part come from?

Mikroskop AO One-Ten [ link ] [More from One-Ten]

What microscopes or components is this part compatible with?

• AO One-Ten

Names, descriptions, terms, and search contexts under which this part is searched.

• AO One-Ten microscope repair parts
• American Optical One-Ten microscope condenser
• AO 110 Mikroskop Kondensor
• AO Mikrostar Mikroskopkondensor
• AO American Optical NA 1.25 aspheric condenser Cat. 1084
• AO Microstar 110 / 120 Kondensor asphärisch
• AO One-Ten condenser replacement
• AO Kondensor Irisblende klemmt - Ersatz
• kondenzor American Optical 1.25 asférický
• condensador asférico American Optical 1.25
• condensador para microscopio AO One-Ten
• condensatore asferico American Optical 1.25
• condensatore per microscopio AO One-Ten
• AO buy spare parts

This is description of this part:

This is the plastic lower housing of the microscope head for Leica DM series microscopes (e.g., DMLB, DMLS, or DM-1000).

Manufacturer: Leica
Head model: 11505193

What is this part needed for?

• if this plastic part of the housing is damaged

What category does this part belong to?

Housings and its parts [ link ] [More Housings and its parts]

Who manufactures this part?

• Leica - Leica Microsystems GmbH [ link ] [More from Leica]
• Leica Wetzlar
• 46

What microscope does this part come from?

Mikroskop Leica DMLS [ link ] [More from DMLS]

What microscopes or components is this part compatible with?

• Leica DMLS
• Leica DMLB
• Leica DMLM

Names, descriptions, terms, and search contexts under which this part is searched.

• Leica DMLS microscope repair parts
• Leica DMLS Binokularkopf Bodenabdeckung 11505193
• Leica DMLB binocular head bottom cover P/N 11505193
• Leica DM L-serie Kopf Gehäuse unten Kunststoff
• Leica DMLM binocular head housing part
• Leica DMLS Kopfgehäuse gebrochen - Ersatz
• Leica DMLB head cover cracked - replacement
• spodní kryt hlavice Leica DMLS
• tapa inferior cabezal binocular Leica DMLS
• repuesto cabezal Leica DMLB
• coperchio inferiore testata binoculare Leica DMLS
• ricambio testata Leica DMLB
• Leica buy spare parts

This is description of this part:

Abber microscope condenser for the Watson Microsystem 70 microscope, but of course compatible with other Watson microscope models.

Manufacturer: Watson
Type: Abbe
Iris diaphragm: yes
Filter holder: yes

The top lens can be unscrewed, providing a lower numerical aperture for working with low-power objectives.

What is this part needed for?

• if your microscope is missing a condenser
• if your microscope condenser is damaged

What category does this part belong to?

Condensers [ link ] [More Condensers]

Who manufactures this part?

• Watson - W. Watson and Sons Ltd. [ link ] [More from Watson]
• W. Watson & Son

What microscope does this part come from?

Mikroskop Watson Microsystem 70 [ link ] [More from Microsystem 70]

What microscopes or components is this part compatible with?

• Watson Microsystem 70

Names, descriptions, terms, and search contexts under which this part is searched.

• Watson Microsystem 70 microscope repair parts
• Watson Microsystem 70 Abbe microscope condenser
• Watson Microsystem Abbe Mikroskopkondensor
• Watson Microsystem 70 Kondensor Ersatz
• Watson London microscope Abbe condenser replacement
• Watson Kondensor Irisblende klemmt
• Watson condenser iris stuck - replacement
• Abbeho kondenzor Watson Microsystem 70
• condensador Abbe Watson Microsystem 70
• condensador para microscopio Watson
• condensatore Abbe Watson Microsystem 70
• condensatore per microscopio Watson
• Watson buy spare parts

This is description of this part:

COBR 6V 15W BA15d flat filament bulb for microscopes with Koehler illumination.

Operating voltage: 6 V
Power consumption: 15 W
Connector: BA15d
Filament type: flat, horizontal

Suitable for many microscopes from various manufacturers. For example, it fits:
- PZO Biolar microscope
- EPI PZO OE4 illuminator

NOTE - IMPORTANT - This bulb does not fit the PZO MB-30 microscope.

What is this part needed for?

• for lighting in microscopes and specialized devices

What category does this part belong to?

Lamps (bulbs) [ link ] [More Lamps (bulbs)]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO Biolar [ link ] [More from Biolar]

What microscopes or components is this part compatible with?

• PZO Biolar
• PZO Biolar FL

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO Biolar microscope repair parts
• Osram 8018
• żarówka do mikroskopu PZO Biolar
• COBR 6V 15W BA15d
• PZO Biolar microscope bulb 6V 15W BA15d
• PZO Biolar Mikroskop Glühbirne 6V 15W
• Osram 8018 6V 15W flat filament microscope lamp
• Köhler Beleuchtung Glühlampe 6V 15W Flachwendel
• PZO Biolar Lampe durchgebrannt - Ersatz
• PZO Biolar bulb burned out - replacement
• žárovka 6V 15W PZO Biolar
• bombilla 6V 15W para microscopio PZO Biolar
• bombilla Osram 8018 6V 15W
• lampadina 6V 15W per microscopio PZO Biolar
• lampadina Osram 8018 6V 15W
• PZO buy spare parts

This is description of this part:

This is the internal component of the angled tube for the microscope head of Leica DM series microscopes (e.g., DMLB, DMLS, or DM-1000).

Manufacturer: Leica
Head model: 11505193

The angled tube (German: Winkeltubus) is the component visible in the last photos in the gallery. This component is mounted to the microscope stand, and the binocular head is screwed onto it at an ergonomic angle.

On this page, I offer the interior of this angled tube.
- metal internal structure
- mirror angled prism
- lower lens (as far as I know, this is a focal lens, also known as a "tube lens" for infinity correction).

If I'm correct that this lower element is a "tube lens," then it's a sought-after component:
- by macro photographers to use infinity lenses
- by people wanting to convert their 160mm/170mm microscope to be compatible with infinity-corrected lenses.

What is this part needed for?

• if the internal metal structure has been damaged, for example, as a result of an impact
• if the angular mirror prism has been damaged
• if the lower lens has been damaged

What category does this part belong to?

Prisms [ link ] [More Prisms]

Who manufactures this part?

• Leica - Leica Microsystems GmbH [ link ] [More from Leica]
• Leica Wetzlar
• 46

What microscope does this part come from?

Mikroskop Leica DMLS [ link ] [More from DMLS]

What microscopes or components is this part compatible with?

• Leica DMLS
• Leica DMLB
• Leica DMLM

Names, descriptions, terms, and search contexts under which this part is searched.

• Leica DMLS microscope repair parts
• Leica DMLB microscope prism
• Leica DMLS Mikroskop Prisma
• Leica DMLS Binokularkopf Prisma mit Tubuslinse 11505193
• Leica DMLB binocular head prism and tube lens P/N 11505193
• Leica DMLM Winkeltubus Prisma
• Leica DM L-serie Prisma delaminiert - Ersatz
• Leica DMLB prism delamination - replacement
• hranol a tubusová čočka Leica DMLS
• prisma y lente de tubo Leica DMLS
• repuesto cabezal Leica DMLB
• prisma e lente di tubo Leica DMLS
• ricambio testata Leica DMLB
• Leica buy spare parts

This is description of this part:

Osram 8018 6V 15W flat filament bulb for PZO MB30 microscopes with Koehler illumination.

Operating voltage: 6V
Power consumption: 15W
Connector: special (not BA15d)
Filament type: flat, horizontal

For example, fits:
- PZO MB-30 microscope
- PZO OE1 EPI illuminator
- PZO LMK Koehler microscope lamp

NOTE - IMPORTANT - This bulb does not fit the PZO Biolar microscope.

What is this part needed for?

• for lighting in microscopes and specialized devices

What category does this part belong to?

Lamps (bulbs) [ link ] [More Lamps (bulbs)]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO MB-30 [ link ] [More from MB-30]

What microscopes or components is this part compatible with?

• PZO MB-30
• PZO MET-3

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO MB-30 microscope repair parts
• Osram 8018
• żarówka do mikroskopu PZO MB30
• PZO MET-3 Mikroskop Lampe
• PZO MB-30 microscope bulb 6V 15W BA15d
• PZO MB-30 Mikroskop Glühbirne 6V 15W
• Osram 8018 6V 15W flat filament microscope lamp
• Köhler Beleuchtung Glühlampe 6V 15W Flachwendel
• PZO MB-30 Lampe durchgebrannt - Ersatz
• PZO MB-30 bulb burned out - replacement
• žárovka 6V 15W PZO MB-30
• bombilla 6V 15W para microscopio PZO MB-30
• bombilla Osram 8018 6V 15W
• lampadina 6V 15W per microscopio PZO MB-30
• lampadina Osram 8018 6V 15W
• PZO buy spare parts

This is description of this part:

This is an illuminator holder with an iris diaphragm (field diaphragm) that screws onto the back of the microscope base.

This component was removed from the Lomo MIN-8 polarizing microscope. A very similar component is found in the Lomo MBB-1 model, but it is threaded instead of attached with screws. However, it can be adapted, so I consider it compatible with that model.

What is this part needed for?

• if your microscope is missing this element
• if your iris diaphragm is damaged

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo MIN-8 illuminator holder
• Lomo MIN-8 Leuchtfeldblende mit Lampenhalter
• Lomo MIN-8 polarization microscope field diaphragm lamp holder
• Lomo MIN-8 Polmikroskop Irisblende Stativfuß
• Lomo MBB-1 Lampenhalter Irisblende
• Lomo MIN-8 Irisblende klemmt - Ersatz
• ЛОМО МИН-8 полевая диафрагма
• polní clona s držákem lampy Lomo MIN-8
• diafragma de campo con portalámparas Lomo MIN-8
• repuesto microscopio polarizante Lomo MIN-8
• diaframma di campo con portalampada Lomo MIN-8
• ricambio microscopio polarizzatore Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

This microscope base is in very good condition and has a nameplate on the back with the manufacturer's logo and model name.

What is this part needed for?

• if you have a microscope with a base in very poor condition
• if you want to mount this base to a different model

What category does this part belong to?

Bases (foots) [ link ] [More Bases (foots)]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Polam R-113 [ link ] [More from Polam R-113]

What microscopes or components is this part compatible with?

• Lomo Polam R-113

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Polam R-113 microscope repair parts
• Lomo Polam R-113 Stativfuß mit Typenschild
• Lomo Polam P-113 polarization microscope base
• Lomo Polam R-113 Mikroskopstativ Fuß
• Lomo Polam R113 base with nameplate
• Lomo Polam R-113 Stativ gebrochen - Ersatz
• ЛОМО Полам Р-113 основание
• podstavec Lomo Polam R-113
• base de microscopio polarizante Lomo Polam R-113
• repuesto microscopio petrográfico Lomo Polam
• base microscopio polarizzatore Lomo Polam R-113
• ricambio microscopio petrografico Lomo Polam
• Lomo buy spare parts

This is description of this part:

The dimensions are shown in the photo.

What is this part needed for?

• on used microscopes this plate is very often missing

What category does this part belong to?

Stickers (nameplates) [ link ] [More Stickers (nameplates)]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo Biolam
• Lomo Biolam D11

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• Lomo Biolam Typenschild Aluminium
• Lomo Biolam nameplate aluminum original
• Bresser Biolam Typenschild
• Lomo Biolam D11 nameplate
• Lomo Biolam Namensschild Restaurierung
• Lomo Biolam microscope badge for restoration
• Lomo Biolam Typenschild fehlt - Ersatz
• štítek Lomo Biolam
• placa de nombre Lomo Biolam
• placa de aluminio microscopio Lomo Biolam
• targhetta Lomo Biolam
• targhetta in alluminio microscopio Lomo Biolam
• Lomo buy spare parts

This is description of this part:

A set of knobs for focusing/moving the microscope up and down. This is a combined coarse movement system (macro movement) and coaxial fine movement (micro movement).

It's very likely that this knob system is also compatible with the Olympus BX51 model and perhaps others. Once I verify this, I'll post the relevant information here (ha, I wonder when?).

What is this part needed for?

• as a repair part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Olympus - Olympus Corporation Tokyo Japan [ link ] [More from Olympus]
• Olympus Tokyo
• Olympus Japan
• Olympus Tokyo Japan
• Olympus Optical Co., Ltd.
• Olympus Corporation.

What microscope does this part come from?

Mikroskop Olympus BX50 [ link ] [More from BX50]

What microscopes or components is this part compatible with?

• Olympus BX50

Names, descriptions, terms, and search contexts under which this part is searched.

• Olympus BX50 microscope repair parts
• Olympus BX50 Fokussierknöpfe Grob- und Feintrieb
• Olympus BX50 microscope coarse and fine focusing knobs
• Olympus BX-50 Triebknöpfe koaxial
• Olympus BX50 focus knob replacement
• Olympus BX50 Feintrieb Knopf dreht durch - Ersatz
• Olympus BX50 fine focus knob broken - replacement
• knoflíky ostření Olympus BX50
• mandos de enfoque macro y micro Olympus BX50
• repuesto enfoque microscopio Olympus BX50
• manopole messa a fuoco Olympus BX50
• ricambio messa a fuoco microscopio Olympus BX50
• Olympus buy spare parts

This is description of this part:

This accessory is used in Carl Zeiss Jena Amplival/Vertival microscopes to mount the halogen illuminator on the microscope stand.

This accessory contains a collimating lens and a mirror that reflects light vertically upward.

When attached to the Amplival model, this accessory can convert it into a microscope with EPI illumination.

The last photo shows an excerpt from the user manual describing this accessory.

What is this part needed for?

• if your microscope is missing this part
• if you have this item but it has been damaged
• if you have a transmitted light microscope and want to upgrade it to EPI reflected light

What category does this part belong to?

Illuminators [ link ] [More Illuminators]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Mikroskop Carl Zeiss Jena Vertival [ link ] [More from Vertival]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Epival

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Vertival microscope repair parts
• Carl Zeiss Jena Amplival microscope lamp holder
• Carl Zeiss Jena Vertival microscope illuminator holder
• Carl Zeiss Jena Amplival Mikroskop Lampen Halter
• Carl Zeiss Jena Vertival Mikroskop Lampenfassung
• Carl Zeiss Jena Vertival Auflicht Lampenhalter Halogen
• Carl Zeiss Jena Epival EPI illuminator mount
• Carl Zeiss Jena Vertival Lampenhalter fehlt - Ersatz
• držák lampy Carl Zeiss Jena Vertival
• soporte de lámpara Carl Zeiss Jena Vertival
• soporte iluminador microscopio Carl Zeiss Jena Amplival
• supporto lampada Carl Zeiss Jena Vertival
• supporto illuminatore microscopio Carl Zeiss Jena Amplival
• Carl Zeiss Jena buy spare parts

This is description of this part:

Lomo Polam 2xx series and LMPR microscopes feature interchangeable objective turrets. This is a great way to have separate sets of microscope objectives and quickly swap them out, instead of unscrewing each objective individually.

More information: here .

Lomo Polam comparison table.

Lomo Polam Manual .

What is this part needed for?

• if you have a microscope without a turret
• if you need an additional turret
• if you have a 1-position objective holder and want a 5-position turret
• if your turret is damaged

What category does this part belong to?

Revolvers (turrets) [ link ] [More Revolvers (turrets)]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Polam LMPR [ link ] [More from Polam LMPR]

What microscopes or components is this part compatible with?

• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo Polam L-213

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Polam LMPR microscope repair parts
• Lomo Polam P211 microscope objective nosepiece
• Lomo Polam P213 microscope revolver
• Lomo Polam R211 revolving turret
• Lomo Polam Objektivrevolver 5-fach RMS wechselbar
• Lomo Polam L-211 / L-213 5-position nosepiece RMS
• Lomo Polam LMPR Revolver Pol
• Lomo Polam Revolver rastet nicht ein - Ersatz
• revolverový nosič objektivů Lomo Polam
• revólver portaobjetivos Lomo Polam L-211
• revólver microscopio polarizante Lomo Polam
• revolver portaobiettivi Lomo Polam L-211
• revolver microscopio polarizzatore Lomo Polam
• Lomo buy spare parts

This is description of this part:

The Lomo MIN-8 polarizing microscope uses RMS threaded objectives mounted in a special adapter.

On this page, I offer a holder for these adapters?you could call it a single-objective non-revolving nosepiece.

What is this part needed for?

• if you have a microscope without a turret
• if you need an additional turret
• if your turret is damaged

What category does this part belong to?

Revolvers (turrets) [ link ] [More Revolvers (turrets)]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo MIN-8 microscope objective nosepiece
• Lomo MIN8 microscope revolver
• Lomo MIN-8 Objektivhalter für Pol Adapter
• Lomo MIN-8 polarization microscope objective adapter holder
• Lomo MIN-8 Objektivhalter fehlt - Ersatz
• držák objektivu Lomo MIN-8
• soporte de objetivo microscopio polarizante Lomo MIN-8
• repuesto Lomo MIN-8
• supporto obiettivo microscopio polarizzatore Lomo MIN-8
• ricambio Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

Complete knobs system for the fine focus mechanism.

Fits the following microscopes:
- Lomo Biolam D1, D2, D3
- Lomo Biolam C1, C2, C3
- Lomo Biolam P1, P2, P3, P4, P5, and P6

"P" written in Cyrillic is the Latin "R," so you might see it written as:
- Lomo Biolam R1, R2, R3, R4, R5, and R6

...and, of course, the above models sold in Western Europe as "Bresser Biolam" and in the UK as "Zenith."

Here is a table comparing the models.

NOTE: This mechanism does not fit models where the fine movement is controlled by a knob built into the microscope base.

What is this part needed for?

• As a service part - very often individual elements in this mechanism are damaged

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo Biolam
• Lomo MBP-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• Lomo Biolam Feintrieb Knöpfe
• Lomo Biolam fine focus knobs set
• Bresser Biolam Feintrieb Knopf
• Lomo Biolam D1 / C1 / P1 fine adjustment knobs
• Lomo MBP-1 Feintrieb Knöpfe Ersatz
• Lomo Biolam Feintrieb Knopf dreht durch
• Lomo Biolam fine focus knob broken - replacement
• knoflíky jemného ostření Lomo Biolam
• mandos de enfoque fino microscopio Lomo Biolam
• repuesto enfoque fino Lomo Biolam
• manopole micrometrica microscopio Lomo Biolam
• ricambio micrometrica Lomo Biolam
• Lomo buy spare parts

This is description of this part:

This is a wide plate that mounts under the microscope. It stabilizes the microscope, especially if it has additional accessories mounted. This base also features ergonomic wrist rests. Four screws are included to secure it to the microscope.

NOTE - This base DOES NOT FIT the Carl Zeiss Jena Amplival microscope.

What is this part needed for?

• as an attractive and ergonomic addition to your microscope
• if you want your microscope to stand more stably on your desk
• if you need to raise the microscope a bit

What category does this part belong to?

Bases (foots) [ link ] [More Bases (foots)]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Mikroskop Carl Zeiss Jena Ergaval [ link ] [More from Ergaval]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Ergaval

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Ergaval microscope repair parts
• Carl Zeiss Jena Ergaval Fussplatte
• Carl Zeiss Jena Ergaval Grundplatte
• Carl Zeiss Jena Ergaval microscope base plate
• Carl Zeiss Jena Ergaval Grundplatte breit mit Handauflagen
• Carl Zeiss Jena Ergaval wide base plate with hand rests
• Ergaval Stativ Standfestigkeit Zubehör
• Ergaval base plate for heavy accessories
• základová deska Carl Zeiss Jena Ergaval
• placa base Carl Zeiss Jena Ergaval
• placa base con reposamanos microscopio Carl Zeiss Jena Ergaval
• piastra base Carl Zeiss Jena Ergaval
• piastra base con poggiamani microscopio Carl Zeiss Jena Ergaval
• Carl Zeiss Jena buy spare parts

This is description of this part:

Here I offer the illumination module block from the microscope base (known as the "metal tube").

The complete illumination system in the PZO MB-30 / MB-30S microscope base consists of:
- an illuminator (light source)
- a "tube" containing a collimating lens and a field diaphragm
- a screw securing the tube
- an angle mirror that reflects light at 90 degrees

Two components of this tube are offered here:
- a metal tube with a lens collimating the illumination beam
- a metal tube with a field diaphragm (iris diaphragm)

There are two critical components here: the collimating lens, which often cracks under temperature, and the field diaphragm, whose blades are prone to bending.

What is this part needed for?

• when the field diaphragm is damaged.
• when the light collimating lens is damaged.

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO MB-30 [ link ] [More from MB-30]

What microscopes or components is this part compatible with?

• PZO MB-30
• PZO MB 30S

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO MB-30 microscope repair parts
• przysłona polowa PZO MB-30
• soczewka kolimująca oświetlenie PZO MB-30
• PZO MB-30 Leuchtfeldblende mit Kollektorlinse
• PZO MB-30 field diaphragm and collector lens
• PZO MB 30S Beleuchtungsmodul Tubus im Fuß
• PZO MB-30 Köhler illumination module
• PZO MB-30 Leuchtfeldblende klemmt - Ersatz
• PZO MB-30 collector lens fungus - replacement
• polní clona s kolektorem PZO MB-30
• diafragma de campo y lente colectora PZO MB-30
• módulo de iluminación microscopio PZO MB-30
• diaframma di campo e lente collettrice PZO MB-30
• modulo illuminazione microscopio PZO MB-30
• PZO buy spare parts

This is description of this part:

This is an optional accessory - it is not standard equipment with Steindorff Berlin microscopes.
By default, Steindorff Berlin microscopes (models S, CYN, and MY) do not have a field diaphragm, so they do not have Köhler illumination. Therefore, optimal image quality cannot be achieved when working with phase contrast, for example.

This field diaphragm module mounts on the illumination lens on the microscope base. This, along with the aperture diaphragm in the condenser, provides Köhler-compatible illumination.

What is this part needed for?

• If you want to upgrade your Steindorff Berlin microscope with illumination compatible with the Koehler system

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• Steindorff Berlin - Steindorff Berlin, West Germany [ link ] [More from Steindorff Berlin]

What microscope does this part come from?

Mikroskop Steindorff Berlin Model C.Y.N. [ link ] [More from Model C.Y.N.]

What microscopes or components is this part compatible with?

• Steindorff Berlin Model S
• Steindorff Berlin Model M.Y.
• Steindorff Berlin Model C.Y.N.

Names, descriptions, terms, and search contexts under which this part is searched.

• Steindorff Berlin Model C.Y.N. microscope repair parts
• Steindorff Berlin microscope field diaphragm
• Steindorff Berlin Mikroskop Feldblende
• Steindorff Berlin Irisblende
• Steindorff Berlin Koehler Beleuchtung
• Steindorff Berlin Koehler illumination
• Steindorff Model S / M.Y. Leuchtfeldblende nachrüsten
• Steindorff C.Y.N. iris field diaphragm accessory
• Steindorff Irisblende klemmt - Ersatz
• polní clona Steindorff Berlin
• diafragma de campo Steindorff Berlin
• iluminación Köhler microscopio Steindorff
• diaframma di campo Steindorff Berlin
• illuminazione Köhler microscopio Steindorff
• Steindorff Berlin buy spare parts

This is description of this part:

Complete condenser holder with condenser retaining screw, height adjustment knob, and rack (gear) for the Vickers M15 microscope.

- screw securing the condenser to the clamp
- condenser clamp (holder)
- rack
- height adjustment knob with pin and rack

What is this part needed for?

• As a service part
• individual components in this mechanism often become damaged
• the screw holding the condenser sometimes gets lost, bent, or breaks (and remains in the thread)
• the rack is very often damaged

What category does this part belong to?

Condenser holders (supports) [ link ] [More Condenser holders (supports)]

Who manufactures this part?

• Vickers - Vickers Instruments Ltd. [ link ] [More from Vickers]
• Vickers Instruments

What microscope does this part come from?

Mikroskop Vickers M15 [ link ] [More from M15]

What microscopes or components is this part compatible with?

• Vickers M15

Names, descriptions, terms, and search contexts under which this part is searched.

• Vickers M15 microscope repair parts
• Vickers M15 Kondensorhalter mit Zahnstange und Knopf
• Vickers M15 microscope condenser support with rack and pinion
• Vickers M15 Mikroskop Kondensorhalter Schraube
• Vickers M15 condenser holder height knob
• Vickers M15 Kondensor fällt herunter - Ersatz
• Vickers M15 condenser rack worn - replacement
• držák kondenzoru Vickers M15
• portacondensador Vickers M15
• repuesto microscopio Vickers M15
• portacondensatore Vickers M15
• ricambio microscopio Vickers M15
• Vickers buy spare parts

This is description of this part:

NOTE - This is a component for the older version of the Beck Diamax microscope - the one with the illuminator housing extending beyond the microscope base.

This is the external part of the Beck Diamax microscope's illumination system. It's a "lamphouse" with an internal field diaphragm that allows for Koehler-style illumination.

What is this part needed for?

• Because this element protrudes from the microscope housing, it is often missing from used microscopes, either because it gets lost or damaged.
• This element will also be useful if the field diaphragm (iris diaphragm) on your microscope becomes damaged.

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• Beck London - R & J Beck, Ltd., London, England [ link ] [More from Beck London]
• Beck
• R and J Beck
• R & J Beck London

What microscope does this part come from?

Mikroskop Beck London Diamax [ link ] [More from Diamax]

What microscopes or components is this part compatible with?

• Beck London Diamax

Names, descriptions, terms, and search contexts under which this part is searched.

• Beck London Diamax microscope repair parts
• Beck Diamax microscope lamp house
• Beck Diamax London microscope lamp house
• Beck Diamax Mikroskop Lampenhaus
• Beck London Diamax Lampenhaus mit Leuchtfeldblende
• Beck Diamax older version illuminator housing
• Beck Diamax Lampe defekt - Ersatz
• osvětlovač Beck London Diamax
• portalámparas Beck London Diamax
• iluminador con diafragma de campo Beck Diamax
• portalampada Beck London Diamax
• illuminatore con diaframma di campo Beck Diamax
• Beck London buy spare parts

This is description of this part:

NOTE - This is a component for the older version of the Beck Diamax microscope - the one with the illuminator housing extending beyond the microscope base.

This is the internal part of the Beck Diamax microscope's illumination system. It consists of a metal tube with an angled mirror that reflects the light beam vertically upward.

What is this part needed for?

• as a repair part, especially when the angled mirror reflecting light is damaged.

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• Beck London - R & J Beck, Ltd., London, England [ link ] [More from Beck London]
• Beck
• R and J Beck
• R & J Beck London

What microscope does this part come from?

Mikroskop Beck London Diamax [ link ] [More from Diamax]

What microscopes or components is this part compatible with?

• Beck London Diamax

Names, descriptions, terms, and search contexts under which this part is searched.

• Beck London Diamax microscope repair parts
• Beck Diamax microscope angled mirror
• Beck Diamax Mikroskop Umlenkspiegel
• Beck London Diamax Beleuchter Innenteil mit Spiegel
• Beck Diamax illuminator inner part angle mirror
• Beck Diamax Spiegel blind - Ersatz
• zrcadlo osvětlení Beck Diamax
• espejo angular iluminador Beck Diamax
• repuesto microscopio Beck London Diamax
• specchio angolare illuminatore Beck Diamax
• ricambio microscopio Beck London Diamax
• Beck London buy spare parts

This is description of this part:

This is the internal illumination module of the Watson Microsystem 70 microscope.

- Field diaphragm (iris diaphragm) with knob
- Wide field lens
- Light beam collimating lens

What is this part needed for?

• as a repair element for replacing the entire module
• especially if the iris diaphragm is damaged
• if any of the lenses collimating the light beam is damaged
• if any of the mechanical components of this module are damaged (usually broken)

What category does this part belong to?

Iris diaphragms [ link ] [More Iris diaphragms]

Who manufactures this part?

• Watson - W. Watson and Sons Ltd. [ link ] [More from Watson]
• W. Watson & Son

What microscope does this part come from?

Mikroskop Watson Microsystem 70 [ link ] [More from Microsystem 70]

What microscopes or components is this part compatible with?

• Watson Microsystem 70

Names, descriptions, terms, and search contexts under which this part is searched.

• Watson Microsystem 70 microscope repair parts
• Watson Microsystem 70 microscope field diaphragm
• Watson Microsystem 70 Mikroskop Feldblende
• Watson Microsystem 70 microscope lens
• Watson Microsystem 70 Mikroskop Linse
• Watson Microsystem 70 Leuchtfeldblende mit Kollektorlinse
• Watson Microsystem 70 illumination module iris
• Watson Irisblende klemmt - Ersatz
• polní clona Watson Microsystem 70
• diafragma de campo Watson Microsystem 70
• módulo de iluminación Watson
• diaframma di campo Watson Microsystem 70
• modulo illuminazione Watson
• Watson buy spare parts

This is description of this part:

Revolver for 6 microscope objectives with RMS thread for the Zeiss IM 35 inverted microscope (also known as the Opton 405).

Catalog number: 47 17 10 (471710)

This turret mounts with a dovetail joint, allowing you to quickly swap out entire sets of objectives without having to unscrew them individually if you have more than one turret.
This allows you to have a complete set of low-power objectives on one turret and a complete set of high-power objectives on the other, quickly swapping them as needed.

What is this part needed for?

• most often if you want a second objective with a separate set of objectives
• if your microscope is missing this element, as it is often removed from used microscopes
• if you have a damaged revolver

What category does this part belong to?

Revolvers (turrets) [ link ] [More Revolvers (turrets)]

Who manufactures this part?

• Zeiss - Carl Zeiss West Germany [ link ] [More from Zeiss]
• Carl Zeiss West
• Carl Zeiss West Germany
• Opton

What microscope does this part come from?

Mikroskop Zeiss IM 35 [ link ] [More from IM 35]

What microscopes or components is this part compatible with?

• Zeiss IM 35
• Opton 405
• Zeiss ICM 405

Names, descriptions, terms, and search contexts under which this part is searched.

• Zeiss IM 35 microscope repair parts
• Zeiss IM 35 Mikroskop Objektivrevolver
• Zeiss IM 35 inverted microscope objective revolver turret nosepiece
• Opton 405 inverted microscope objective revolver turret nosepiece
• Zeiss 47 17 10 Revolver 6-fach RMS
• Zeiss 471710 6-position nosepiece IM 35
• Zeiss ICM 405 Objektivrevolver
• Zeiss IM 35 Revolver rastet nicht ein - Ersatz
• revolverový nosič objektivů Zeiss IM 35
• revólver portaobjetivos microscopio invertido Zeiss IM 35
• revólver Zeiss 471710
• revolver portaobiettivi microscopio invertito Zeiss IM 35
• revolver Zeiss 471710
• Zeiss buy spare parts

This is description of this part:

A metal cap engraved with the manufacturer's logo and the model name "R1U4.2." Both mounting screws are included.

For model: P1 Y 4.2(Cyrillic)
In Latin: R1 U 4.2

This cap covers and holds the spring, which is part of the fine (micro) advance mechanism.

The plate also contains the serial number, which begins with the year of manufacture (here, 73).

The markings placed immediately after the model name (here Y 4.2) mean:

Y 4.2: means a microscope or a microscope part adapted for operation in rooms with moderate humidity and within a temperature range of 10°C - 35°C.
T 4.2: means a microscope or a microscope part adapted for operation in rooms with extremely dry air or with high humidity in a tropical climate and within a temperature range of 10°C - 45°C.
Y 1.1: means a microscope or a microscope part adapted for operation in rooms with moderate humidity, but with the possibility of outdoor operation within a temperature range of -10°C - 40°C.

(Source: mikroskopfreunde-nordhessen.de)

What is this part needed for?

• On the secondary market, you can find Biolam microscopes that have been repaired in the past and are missing this part.
• Also for those who simply lost this part during microscope service.
• For those who have this plate, but it's damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo Biolam

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• tabliczka znamionowa Lomo Biolam P1
• Lomo Biolam P1 Federabdeckung mit Logo
• Lomo Biolam P1 vertical focus spring cover with logo
• Lomo Biolam R1 1973 Abdeckung
• Bresser Biolam Federabdeckung
• sowjetisches Mikroskop Lomo Biolam P1 Restaurierung
• soviet Lomo Biolam P1 microscope cap nameplate
• Lomo Biolam P1 Abdeckung fehlt - Ersatz
• kryt pružiny Lomo Biolam P1
• tapa del muelle microscopio Lomo Biolam P1
• repuesto microscopio soviético Lomo Biolam P1
• copertura molla microscopio Lomo Biolam P1
• ricambio microscopio sovietico Lomo Biolam P1
• Lomo buy spare parts

This is description of this part:

A metal cap engraved with the manufacturer's logo and the model name "C1U4.2." Both mounting screws are included.

For model: C1 Y 4,2(Cyrillic)
In Latin: S1 U 4,2

This cap covers and holds the spring, which is part of the fine (micro) advance mechanism.

The plate also contains the serial number, which begins with the year of manufacture (here, 76).

The markings placed immediately after the model name (here Y 4.2) mean:

Y 4.2: means a microscope or a microscope part adapted for operation in rooms with moderate humidity and within a temperature range of 10°C - 35°C.
T 4.2: means a microscope or a microscope part adapted for operation in rooms with extremely dry air or with high humidity in a tropical climate and within a temperature range of 10°C - 45°C.
Y 1.1: means a microscope or a microscope part adapted for operation in rooms with moderate humidity, but with the possibility of outdoor operation within a temperature range of -10°C - 40°C.

(Source: mikroskopfreunde-nordhessen.de)

What is this part needed for?

• On the secondary market, you can find Biolam microscopes that have been repaired in the past and are missing this part.
• Also for those who simply lost this part during microscope service.
• For those who have this plate, but it's damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo Biolam

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• tabliczka znamionowa Lomo Biolam C1
• Lomo Biolam C1 Federabdeckung mit Logo
• Lomo Biolam C1 vertical focus spring cover with logo
• Lomo Biolam S1 1976 Abdeckung
• Bresser Biolam Federabdeckung
• sowjetisches Mikroskop Lomo Biolam C1 Restaurierung
• soviet Lomo Biolam C1 microscope cap nameplate
• Lomo Biolam C1 Abdeckung fehlt - Ersatz
• kryt pružiny Lomo Biolam C1
• tapa del muelle microscopio Lomo Biolam C1
• repuesto microscopio soviético Lomo Biolam C1
• copertura molla microscopio Lomo Biolam C1
• ricambio microscopio sovietico Lomo Biolam C1
• Lomo buy spare parts

This is description of this part:

A metal plate engraved with the manufacturer's logo and the model name "R12." Both mounting screws are included.

For model: P12 (Cyrillic)
In Latin: R12

The two digits after the letter in the Biolam microscope model name (as in Pxx here, meaning P12) indicate models with a fine-travel adjustment (micro-travel) located in the foot.

This is a cap that covers and holds the spring, which is part of the fine-travel mechanism.

The plate also contains the serial number, which begins with the year of manufacture.

What is this part needed for?

• On the secondary market, you can find Biolam microscopes that have been repaired in the past and are missing this part.
• Also for those who simply lost this part during microscope service.
• For those who have this plate, but it's damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam [ link ] [More from Biolam]

What microscopes or components is this part compatible with?

• Lomo Biolam

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam microscope repair parts
• tabliczka znamionowa Lomo Biolam P12
• Lomo Biolam P12 Federabdeckung mit Logo
• Lomo Biolam P12 vertical focus spring cover with logo
• Lomo Biolam R12 Abdeckung
• Bresser Biolam Federabdeckung
• sowjetisches Mikroskop Lomo Biolam P12 Restaurierung
• soviet Lomo Biolam P12 microscope cap nameplate
• Lomo Biolam P12 Abdeckung fehlt - Ersatz
• kryt pružiny Lomo Biolam P12
• tapa del muelle microscopio Lomo Biolam P12
• repuesto microscopio soviético Lomo Biolam P12
• copertura molla microscopio Lomo Biolam P12
• ricambio microscopio sovietico Lomo Biolam P12
• Lomo buy spare parts

This is description of this part:

The rack is a service element for the vertical focusing of the microscope condenser.

This is not a 3D print - it is an original item manufactured by Lomo and removed from a MBP-3 microscope. If (unfortunately) you decide to 3D print it, you can find it here .

What is this part needed for?

• as a service part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MBR-3 [ link ] [More from MBR-3]

What microscopes or components is this part compatible with?

• Lomo MBR-3
• Lomo Biolam
• Lomo Erudit
• Lomo Biolam 70
• Lomo Biolam D11
• Lomo MBP-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MBR-3 microscope repair parts
• Lomo MBP-3 Kondensortrieb Zahnstange
• Lomo MBR-3 condenser focus rack original
• Lomo Biolam Kondensor Zahnstange MBR-3
• Bresser Biolam condenser rack replacement
• Lomo Biolam 70 / Erudit Kondensor Zahnstange
• Lomo MBP-1 / Biolam D11 condenser rack
• Lomo MBR-3 Kondensor fällt herunter - Zahnstange
• ozubená lišta kondenzoru Lomo MBP-3
• cremallera del condensador Lomo MBR-3
• cremallera condensador microscopio Lomo Biolam
• cremagliera condensatore Lomo MBR-3
• cremagliera condensatore microscopio Lomo Biolam
• Lomo buy spare parts

This is description of this part:

A metal plate engraved with the manufacturer's logo and the model name "MBP-3." Both mounting screws are included.

For model: MBP-3 (Cyrillic)
In Latin: MBR-3

This is a cap that covers and holds the spring, which is part of the fine-travel mechanism.

The plate also contains the serial number, which begins with the year of manufacture.

What is this part needed for?

• On the secondary market, you can find MBP-3 microscopes that have been repaired in the past and are missing this part.
• Also for those who simply lost this part during microscope service.
• For those who have this plate, but it's damaged.

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MBR-3 [ link ] [More from MBR-3]

What microscopes or components is this part compatible with?

• Lomo MBR-3

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MBR-3 microscope repair parts
• tabliczka znamionowa Lomo MBP-3
• Lomo MBP-3 Federabdeckung mit Logo
• Lomo MBP-3 vertical focus spring cover with logo
• Lomo MBR-3 Abdeckung
• sowjetisches Mikroskop Lomo MBP-3 Restaurierung
• soviet Lomo MBP-3 microscope cap nameplate
• Lomo MBP-3 Abdeckung fehlt - Ersatz
• kryt pružiny Lomo MBP-3
• tapa del muelle microscopio Lomo MBP-3
• repuesto microscopio soviético Lomo MBP-3
• copertura molla microscopio Lomo MBP-3
• ricambio microscopio sovietico Lomo MBP-3
• Lomo buy spare parts

This is description of this part:

Gear rack (toothed rack) - a service part of the vertical movement mechanism of the microscope condenser.

This is not a 3D print - it is an original part manufactured by PZO and removed from the PZO MB-30 microscope.

Compatible with the following microscopes:
- PZO MB-30 / MB-30S
- PZO ML4 / ML5 / ML6

I need to check if it fits the PZO MS series microscopes.

What is this part needed for?

• as a service part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Mikroskop PZO MB-30 [ link ] [More from MB-30]

What microscopes or components is this part compatible with?

• PZO MB-30
• PZO ML4
• PZO ML5
• PZO ML6
• PZO MB 30S

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO MB-30 microscope repair parts
• PZO MB-30 Mikroskop rack
• PZO MB-30 Kondensortrieb Zahnstange
• PZO MB-30 condenser focus rack original
• PZO ML4 / ML5 / ML6 Kondensor Zahnstange
• PZO MB 30S condenser rack replacement
• PZO MB-30 Kondensor fällt herunter - Zahnstange
• PZO ML-5 condenser rack worn - replacement
• ozubená lišta kondenzoru PZO MB-30
• cremallera del condensador PZO MB-30
• repuesto condensador microscopio PZO ML-5
• cremagliera condensatore PZO MB-30
• ricambio condensatore microscopio PZO ML-5
• PZO buy spare parts

This is description of this part:

The original nameplate for this particular model is a real rarity.

The dimensions are shown in the photo.

What is this part needed for?

• on used microscopes this plate is very often missing

What category does this part belong to?

Stickers (nameplates) [ link ] [More Stickers (nameplates)]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Biolam 70 [ link ] [More from Biolam 70]

What microscopes or components is this part compatible with?

• Lomo Biolam 70

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Biolam 70 microscope repair parts
• Lomo Biolam-70 Typenschild Aluminium
• Lomo Biolam-70 nameplate aluminum original
• Lomo Biolam 70 rare nameplate
• Lomo Biolam-70 Namensschild Restaurierung
• Lomo Biolam-70 microscope badge for restoration
• Lomo Biolam-70 Typenschild fehlt - Ersatz
• štítek Lomo Biolam-70
• placa de nombre Lomo Biolam-70
• placa de aluminio microscopio Lomo Biolam-70
• targhetta Lomo Biolam-70
• targhetta in alluminio microscopio Lomo Biolam-70
• Lomo buy spare parts

This is description of this part:

The dimensions are shown in the photo.

What is this part needed for?

• on used microscopes this plate is very often missing

What category does this part belong to?

Stickers (nameplates) [ link ] [More Stickers (nameplates)]

Who manufactures this part?

• Beck London - R & J Beck, Ltd., London, England [ link ] [More from Beck London]
• Beck
• R and J Beck
• R & J Beck London

What microscope does this part come from?

Mikroskop Beck London Diamax [ link ] [More from Diamax]

What microscopes or components is this part compatible with?

• Beck London Diamax

Names, descriptions, terms, and search contexts under which this part is searched.

• Beck London Diamax microscope repair parts
• Beck London Diamax Typenschild Aluminium
• Beck London Diamax nameplate aluminum original
• Beck Diamax microscope nameplate
• Beck London Diamax Namensschild Restaurierung
• Beck London Diamax microscope badge for restoration
• Beck London Diamax Typenschild fehlt - Ersatz
• štítek Beck Diamax
• placa de nombre Beck Diamax
• placa de aluminio microscopio Beck Diamax
• targhetta Beck Diamax
• targhetta in alluminio microscopio Beck Diamax
• Beck London buy spare parts

This is description of this part:

Unfortunately, I'm not entirely sure if this Logo actually comes from the Ortholux II model.

The dimensions are shown in the photo.

What is this part needed for?

• on used microscopes this plate is very often missing

What category does this part belong to?

Stickers (nameplates) [ link ] [More Stickers (nameplates)]

Who manufactures this part?

• Leitz - Leitz Wetzlar [ link ] [More from Leitz]
• Leitz Wetzlar, West Germany
• E. Leitz Wetzlar GmbH
• Ernst Leitz Wetzlar

What microscope does this part come from?

Mikroskop Leitz Ortholux II [ link ] [More from Ortholux II]

What microscopes or components is this part compatible with?

• Leitz Ortholux II
• Leitz SM-LUX

Names, descriptions, terms, and search contexts under which this part is searched.

• Leitz Ortholux II microscope repair parts
• Leitz Wetzlar Typenschild Aluminium
• Leitz Wetzlar nameplate aluminum original
• Leitz Wetzlar Ortholux II Logo Schild
• Leitz SM-LUX logo nameplate
• Leitz Wetzlar Namensschild Restaurierung
• Leitz Wetzlar microscope badge for restoration
• Leitz Wetzlar Typenschild fehlt - Ersatz
• štítek s logem Leitz Wetzlar
• placa de nombre Leitz Wetzlar
• placa de aluminio microscopio Leitz Wetzlar
• targhetta Leitz Wetzlar
• targhetta in alluminio microscopio Leitz Wetzlar
• Leitz buy spare parts

This is description of this part:

A complete focusing block for coarse (macro feed) and fine (micro feed) movement, complete with knobs.

Leitz produced several versions of the SM model. This block is from the model with black plastic knobs. In contrast, the SM-D version has metal knobs (link).

What is this part needed for?

• as a service part when repairing the focusing mechanism (vertical movement)
• if you want to quickly replace the entire block

What category does this part belong to?

Focusing blocks [ link ] [More Focusing blocks]

Who manufactures this part?

• Leitz - Leitz Wetzlar [ link ] [More from Leitz]
• Leitz Wetzlar, West Germany
• E. Leitz Wetzlar GmbH
• Ernst Leitz Wetzlar

What microscope does this part come from?

Mikroskop Leitz SM [ link ] [More from SM]

What microscopes or components is this part compatible with?

• Leitz SM

Names, descriptions, terms, and search contexts under which this part is searched.

• Leitz SM microscope repair parts
• Leitz SM Triebkasten Grob- und Feintrieb mit Knöpfen
• Leitz Wetzlar SM focusing block coarse and fine
• Leitz SM Fokussierung komplett Block
• Leitz SM microscope focus block replacement
• Leitz SM Fokussierung schwergängig - neufetten
• Leitz SM focus slipping - repair
• blok ostření Leitz SM
• bloque de enfoque macro y micro Leitz SM
• reparación enfoque microscopio Leitz Wetzlar SM
• blocco messa a fuoco macro e micro Leitz SM
• riparazione messa a fuoco microscopio Leitz Wetzlar SM
• Leitz buy spare parts

This is description of this part:

A set of knobs for moving the coarse focus mechanism (macro focus).

A gear located on this shaft moves along the toothed rack (link).

What is this part needed for?

• as a service item for replacement
• if any of the knobs are damaged
• if the central pin is bent, for example

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• SWIFT (Japan) - Swift Optical Instruments (Japan) [ link ] [More from SWIFT (Japan)]

What microscope does this part come from?

Mikroskop SWIFT (Japan) M2240 [ link ] [More from M2240]

What microscopes or components is this part compatible with?

• SWIFT (Japan) M2240

Names, descriptions, terms, and search contexts under which this part is searched.

• SWIFT (Japan) M2240 microscope repair parts
• Swift M2240 Mikroskop Grobtrieb
• Swift M2240 Mikroskop coarse focus
• Swift M2240 Grobtrieb Knöpfe mit Ritzel
• Swift Japan M2240 coarse focus knobs and pinion
• Swift M2240 Grobtrieb rutscht durch - Ersatz
• Swift M2240 focus slipping - pinion replacement
• knoflíky hrubého ostření Swift M2240
• mandos de enfoque macro Swift M2240
• repuesto enfoque microscopio Swift
• manopole messa a fuoco macro Swift M2240
• ricambio messa a fuoco microscopio Swift
• SWIFT (Japan) buy spare parts

This is description of this part:

A toothed rack (also known as a rack) for coarse focusing (macro focus).

This rack is moved by a gear located on a shaft between the coarse adjustment knobs (link).

What is this part needed for?

• as a service item for replacement

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• SWIFT (Japan) - Swift Optical Instruments (Japan) [ link ] [More from SWIFT (Japan)]

What microscope does this part come from?

Mikroskop SWIFT (Japan) M2240 [ link ] [More from M2240]

What microscopes or components is this part compatible with?

• SWIFT (Japan) M2240

Names, descriptions, terms, and search contexts under which this part is searched.

• SWIFT (Japan) M2240 microscope repair parts
• Swift M2240 Mikroskop Grobtrieb Zahnstange
• Swift M2240 Mikroskop coarse focus rack
• Swift Japan M2240 Fokussierung Zahnstange
• Swift M2240 focus rack replacement
• Swift M2240 Tubus sinkt ab - Zahnstange
• ozubená lišta ostření Swift M2240
• cremallera de enfoque Swift M2240
• repuesto enfoque microscopio Swift
• cremagliera messa a fuoco Swift M2240
• ricambio messa a fuoco microscopio Swift
• SWIFT (Japan) buy spare parts

This is description of this part:

This is a service part for the PZO SK8 mechanical microscope stage.

It consists of a set of knobs and a horizontal worm shaft with a handle and screws.

This part is often damaged in PZO SK8 microscope stages: because the knobs extend beyond the microscope's outline after installation, the worm shaft often bends during transport, making it difficult to straighten properly.

The PZO SK8 is a mechanical microscope stage with horizontal knobs, primarily used in PZO MB30 microscopes, ML series models, and PZO MST-130/131 stereo microscopes - but is also sometimes installed in Studar and Biolar models.

What is this part needed for?

• as a repair part. The main reason for the need for replacement is stated in the description

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• PZO - Polskie Zaklady Optyczne [ link ] [More from PZO]
• PZO Warszawa
• PZO Poland
• PZO Warszawa Poland

What microscope does this part come from?

Element PZO SK8 mechanical stage [ link ]

What microscopes or components is this part compatible with?

• PZO SK8 mechanical stage
• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO ML4
• PZO ML5
• PZO ML6
• PZO MST-130
• PZO Biolar FL
• PZO MB 30S
• PZO MB-10

Names, descriptions, terms, and search contexts under which this part is searched.

• PZO SK8 mechanical stage microscope repair parts
• PZO SK-8 mechanical stage
• PZO MB-30 Mikroskoptisch SK8
• stolik mikroskopowy PZO SK8
• PZO SK8 Kreuztisch Triebknöpfe mit Schneckenwelle
• PZO SK8 mechanical stage knobs and worm shaft
• PZO Biolar Kreuztisch SK8 Knopf
• PZO Studar / ML5 stage handwheels
• PZO SK8 Tischtrieb Knopf dreht durch - Ersatz
• ovladač křížového stolku PZO SK8
• mandos de la platina mecánica PZO SK8
• platina mecánica microscopio PZO Biolar
• manopole tavolino traslatore PZO SK8
• tavolino traslatore microscopio PZO Biolar
• PZO buy spare parts

This is description of this part:

Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan) before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s.

Item: Microscope Objective
Type: Metallurgical Objective
Manufacturer: Swift Japan
Model: M40x 0.65 210/-
Magnification: 40x
Correction: Achromat
Numerical Aperture: 0.65
Tube Length: 210 mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip.

This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator.

What is this part needed for?

• if you need a lens for working without a cover glass
• if you need a lens for extreme macro photography

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• SWIFT (Japan) - Swift Optical Instruments (Japan) [ link ] [More from SWIFT (Japan)]

What microscope does this part come from?

Mikroskop SWIFT (Japan) Metallurgical [ link ]

What microscopes or components is this part compatible with?

• SWIFT (Japan) Metallurgical

Names, descriptions, terms, and search contexts under which this part is searched.

• SWIFT (Japan) Metallurgical microscope repair parts
• Swift M4000 metallurgical objective 40x
• Swift Japan M40x 0.65 210/- Objektiv
• Swift M40x metallurgical microscope objective tube length 210 mm
• Swift Metallmikroskop Auflicht Objektiv 40x RMS
• Swift Japan reflected light objective 40x
• Swift 40x Objektiv Pilz - Ersatz
• objektiv Swift M40x metalurgický
• objetivo metalográfico Swift M40x 210 mm
• objetivo luz reflejada Swift Japan 40x
• obiettivo metallografico Swift M40x 210 mm
• obiettivo luce riflessa Swift Japan 40x
• SWIFT (Japan) buy spare parts

This is description of this part:

Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan) before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s.

Item: Microscope Objective
Type: Metallurgical Objective
Manufacturer: Swift Japan
Model: M100x 0.8 210/-
Magnification: 100x
Correction: Achromat
Numerical Aperture: 0.8
Tube Length: 210 mm
Focal Length: 45 mm
Cover Glass: No
Immersion: No
Thread: RMS

210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip.

This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator.

What is this part needed for?

• if you need a lens for working without a cover glass
• if you need a 100x objective for non-oil immersion work
• if you need a lens for extreme macro photography

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• SWIFT (Japan) - Swift Optical Instruments (Japan) [ link ] [More from SWIFT (Japan)]

What microscope does this part come from?

Mikroskop SWIFT (Japan) Metallurgical [ link ]

What microscopes or components is this part compatible with?

• SWIFT (Japan) Metallurgical

Names, descriptions, terms, and search contexts under which this part is searched.

• SWIFT (Japan) Metallurgical microscope repair parts
• Swift M4000 metallurgical objective 100x
• Swift Japan M100x 0.8 210/- Objektiv
• Swift M100x metallurgical microscope objective tube length 210 mm
• Swift Metallmikroskop Auflicht Objektiv 100x RMS
• Swift Japan reflected light objective 100x
• Swift 100x Objektiv Pilz - Ersatz
• objektiv Swift M100x metalurgický
• objetivo metalográfico Swift M100x 210 mm
• objetivo luz reflejada Swift Japan 100x
• obiettivo metallografico Swift M100x 210 mm
• obiettivo luce riflessa Swift Japan 100x
• SWIFT (Japan) buy spare parts

This is description of this part:

An empty (!) wooden box containing glass photospectrometry cuvettes. The top is inscribed with the words: Glass-Kleinkuvette 8 1 cm
Original product from the Carl Zeiss Jena factory.

What is this part needed for?

• especially if you have glass cuvettes without a box and want to keep them in their original packaging

What category does this part belong to?

Wooden boxes [ link ] [More Wooden boxes]

Who manufactures this part?

• Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More from Carl Zeiss Jena]
• ausJena
• aus Jena

What microscope does this part come from?

Element Carl Zeiss Jena Spekol 11 [ link ]

What microscopes or components is this part compatible with?

• Carl Zeiss Jena Spekol 11

Names, descriptions, terms, and search contexts under which this part is searched.

• Carl Zeiss Jena Spekol 11 microscope repair parts
• Carl Zeiss Jena Spekol 11 Küvetten Holzkasten leer
• Carl Zeiss Jena Spekol 11 glass cuvette wooden box empty
• Carl Zeiss Jena Glas-Kleinküvette 8 1 cm Kasten
• Carl Zeiss Jena Spekol 10 cuvette case
• Spekol 11 Küvettenkasten fehlt - Ersatz
• dřevěná krabička kyvet Carl Zeiss Jena Spekol 11
• caja de madera cubetas Carl Zeiss Jena Spekol 11
• estuche cubetas espectrofotómetro Carl Zeiss Jena
• cassetta in legno cuvette Carl Zeiss Jena Spekol 11
• astuccio cuvette spettrofotometro Carl Zeiss Jena
• Carl Zeiss Jena buy spare parts

This is description of this part:

Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits this microscope.

Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 2x

Dimensions are shown in the photos.

What is this part needed for?

• If your microscope lacks an objective lens with this magnification
• If you have such an objective lens, but it is damaged

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Will Wetzlar - Will Wetzlar [ link ] [More from Will Wetzlar]
• Wilhelm Will KG, Optisches Werk
• Will-Optik
• Will Leitz GmbH
• Will Wetzlar KG
• 29

What microscope does this part come from?

Mikroskop Will Wetzlar Stereoskopische Prismenlupe L4 [ link ] [More from Stereoskopische Prismenlupe L4]

What microscopes or components is this part compatible with?

• Will Wetzlar Stereoskopische Prismenlupe L4
• CBS Beck Kassel Stereomikroskop

Names, descriptions, terms, and search contexts under which this part is searched.

• Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
• Will Wetzlar Stereomikroskop Objektiv 2x
• Will Wetzlar stereo microscope objective 2x
• CBS Beck Kassel Stereomikroskop Objektiv 2x
• CBS Kassel stereo microscope objective 2x
• Will Wetzlar L4 Prismenlupe Objektivpaar 2x
• Will Wetzlar Stereoskopische Prismenlupe L4 objective 2x
• CBS Beck Kassel Stereomikroskop Objektiv Ersatz
• Will L4 Objektiv Pilz - Ersatz
• objektiv 2x stereolupa Will Wetzlar L4
• objetivo 2x lupa estereoscópica Will Wetzlar L4
• objetivo estéreo CBS Beck Kassel
• obiettivo 2x lente stereoscopica Will Wetzlar L4
• obiettivo stereo CBS Beck Kassel
• Will Wetzlar buy spare parts

This is description of this part:

Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits this microscope.

Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 5x

Dimensions are shown in the photos.

What is this part needed for?

• If your microscope lacks an objective lens with this magnification
• If you have such an objective lens, but it is damaged

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Will Wetzlar - Will Wetzlar [ link ] [More from Will Wetzlar]
• Wilhelm Will KG, Optisches Werk
• Will-Optik
• Will Leitz GmbH
• Will Wetzlar KG
• 29

What microscope does this part come from?

Mikroskop Will Wetzlar Stereoskopische Prismenlupe L4 [ link ] [More from Stereoskopische Prismenlupe L4]

What microscopes or components is this part compatible with?

• Will Wetzlar Stereoskopische Prismenlupe L4
• CBS Beck Kassel Stereomikroskop

Names, descriptions, terms, and search contexts under which this part is searched.

• Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
• Will Wetzlar Stereomikroskop Objektiv 5x
• Will Wetzlar stereo microscope objective 5x
• CBS Beck Kassel Stereomikroskop Objektiv 5x
• CBS Kassel stereo microscope objective 5x
• Will Wetzlar L4 Prismenlupe Objektivpaar 5x
• Will Wetzlar Stereoskopische Prismenlupe L4 objective 5x
• CBS Beck Kassel Stereomikroskop Objektiv Ersatz
• Will L4 Objektiv Pilz - Ersatz
• objektiv 5x stereolupa Will Wetzlar L4
• objetivo 5x lupa estereoscópica Will Wetzlar L4
• objetivo estéreo CBS Beck Kassel
• obiettivo 5x lente stereoscopica Will Wetzlar L4
• obiettivo stereo CBS Beck Kassel
• Will Wetzlar buy spare parts

This is description of this part:

Lens for the "Stereoskopische Prismlupe L4" stereo microscope by Will Wetzlar.
A very similar microscope model was sold by CBS Beck Kassel, and this lens also fits this microscope.

Item: Lens for a stereo microscope
Manufacturer: Will Wetzlar
Magnification: 10x

Dimensions are shown in the photos.

What is this part needed for?

• If your microscope lacks an objective lens with this magnification
• If you have such an objective lens, but it is damaged

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Will Wetzlar - Will Wetzlar [ link ] [More from Will Wetzlar]
• Wilhelm Will KG, Optisches Werk
• Will-Optik
• Will Leitz GmbH
• Will Wetzlar KG
• 29

What microscope does this part come from?

Mikroskop Will Wetzlar Stereoskopische Prismenlupe L4 [ link ] [More from Stereoskopische Prismenlupe L4]

What microscopes or components is this part compatible with?

• Will Wetzlar Stereoskopische Prismenlupe L4
• CBS Beck Kassel Stereomikroskop

Names, descriptions, terms, and search contexts under which this part is searched.

• Will Wetzlar Stereoskopische Prismenlupe L4 microscope repair parts
• Will Wetzlar Stereomikroskop Objektiv 10x
• Will Wetzlar stereo microscope objective 10x
• CBS Beck Kassel Stereomikroskop Objektiv 10x
• CBS Kassel stereo microscope objective 10x
• Will Wetzlar L4 Prismenlupe Objektivpaar 10x
• Will Wetzlar Stereoskopische Prismenlupe L4 objective 10x
• CBS Beck Kassel Stereomikroskop Objektiv Ersatz
• Will L4 Objektiv Pilz - Ersatz
• objektiv 10x stereolupa Will Wetzlar L4
• objetivo 10x lupa estereoscópica Will Wetzlar L4
• objetivo estéreo CBS Beck Kassel
• obiettivo 10x lente stereoscopica Will Wetzlar L4
• obiettivo stereo CBS Beck Kassel
• Will Wetzlar buy spare parts

This is description of this part:

A service part for the condenser holder for the Beck Diamax microscope.
This is a knob with an integrated gear for adjusting the condenser height. This is the part on which the rack moves.
Two mounting screws are included.

What is this part needed for?

• as a service element

What category does this part belong to?

Condenser holders (supports) [ link ] [More Condenser holders (supports)]

Who manufactures this part?

• Beck London - R & J Beck, Ltd., London, England [ link ] [More from Beck London]
• Beck
• R and J Beck
• R & J Beck London

What microscope does this part come from?

Mikroskop Beck London Diamax [ link ] [More from Diamax]

What microscopes or components is this part compatible with?

• Beck London Diamax

Names, descriptions, terms, and search contexts under which this part is searched.

• Beck London Diamax microscope repair parts
• Beck Diamax Kondensortrieb Knopf mit Ritzel
• Beck London Diamax condenser focusing knob and pinion
• Beck Diamax Mikroskop Kondensorhalter Höhenverstellknopf
• Beck Diamax condenser height knob replacement
• Beck Diamax Kondensor fällt herunter - Ritzel
• knoflík posuvu kondenzoru Beck Diamax
• mando de enfoque del condensador Beck Diamax
• repuesto microscopio Beck London Diamax
• manopola condensatore Beck Diamax
• ricambio microscopio Beck London Diamax
• Beck London buy spare parts

This is description of this part:

Repair part for the condenser mount for the Beck Diamax microscope.
This is a toothed rack (also known as a rack) responsible for adjusting the condenser height. This part moves on a gear integrated with the height adjustment knob.
Two mounting screws are included.

What is this part needed for?

• as a service element

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Beck London - R & J Beck, Ltd., London, England [ link ] [More from Beck London]
• Beck
• R and J Beck
• R & J Beck London

What microscope does this part come from?

Mikroskop Beck London Diamax [ link ] [More from Diamax]

What microscopes or components is this part compatible with?

• Beck London Diamax

Names, descriptions, terms, and search contexts under which this part is searched.

• Beck London Diamax microscope repair parts
• Beck Diamax Kondensortrieb Zahnstange
• Beck London Diamax condenser focusing rack
• Beck Diamax Mikroskop Kondensorhalter Zahnstange
• Beck Diamax condenser rack replacement
• Beck Diamax Kondensor fällt herunter - Zahnstange
• ozubená lišta kondenzoru Beck Diamax
• cremallera del condensador Beck Diamax
• repuesto microscopio Beck London Diamax
• cremagliera condensatore Beck Diamax
• ricambio microscopio Beck London Diamax
• Beck London buy spare parts

This is description of this part:

Objective lens with centered objective adapter for the Meopta EPI polarizing microscope.

The objective lens shows no signs of use - it is in perfect cosmetic and optical condition. Items in this condition are rarely found on the secondary market.

Manufacturer: Meopta
Model: P40x 0.85-oo/0
Magnification: 40x
Numerical aperture: 0.85
Tube: infinity (oo)
Immersion: ?
Coverslip: no

The RMS thread objective is mounted in a centered adapter (holder), which allows:
- precise centering of the objective relative to the optical axis,
- use of the objective in microscopes with EPI (polarized) reflected illumination,
e.g.:
- Meopta RU-2
- Meopta DRU-3

The objective can be unscrewed at any time, and another RMS thread objective can be screwed into the adapter.

According to Meopta documentation (DRU-3 microscope brochure), the objective mounted in this adapter can be centered within a range of approximately +/- 0.7 mm relative to the observation axis.

What is this part needed for?

• If you have a Meopta polarization microscope and need an objective lens with this magnification
• If you only need a objective adapter to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope objective
• Meopta RU2 P40x 0.85 Pol Objektiv
• Meopta RU2 40x polarizing objective with centering adapter
• Meopta DRU-3 Pol Objektiv 40x Auflicht
• Meopta RU2 Pol-Mikroskop Auflicht
• Meopta DRU-3 reflected light polarizing objective 40x
• Meopta Pol Objektiv Pilz - Ersatz
• obiektyw mikroskopowy polaryzacyjny Meopta 40x
• polarizační objektiv Meopta RU2 P40x 0.85
• objetivo de polarización Meopta 40x
• objetivo Pol luz reflejada Meopta RU2
• obiettivo polarizzazione Meopta 40x
• obiettivo Pol luce riflessa Meopta RU2
• Meopta buy spare parts

This is description of this part:

Objective lens for the Meopta microscope.

The objective lens shows no signs of use - it is in perfect cosmetic and optical condition. Items in this condition are rarely found on the secondary market.

Manufacturer: Meopta
Model: P24 0,65-oo/0
Magnification: ?
Numerical aperture: 0.65
Tube: infinity (oo)
Immersion: ?
Coverslip: no
Thread: RMS

What is this part needed for?

• If you have a Meopta polarization microscope and need an objective lens with this magnification

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope objective
• Meopta RU2 P24 0.65-oo/0 Pol Objektiv
• Meopta RU2 24x polarizing objective infinity
• Meopta DRU-3 Pol Objektiv 24x Auflicht
• Meopta RU2 Pol-Mikroskop Auflicht
• Meopta DRU-3 reflected light polarizing objective 24x
• Meopta Pol Objektiv Pilz - Ersatz
• obiektyw mikroskopowy polaryzacyjny Meopta 24x
• polarizační objektiv Meopta RU2 P24 0.65-oo/0
• objetivo de polarización Meopta 24x
• objetivo Pol luz reflejada Meopta RU2
• obiettivo polarizzazione Meopta 24x
• obiettivo Pol luce riflessa Meopta RU2
• Meopta buy spare parts

This is description of this part:

Objective lens with centered objective adapter for the Meopta EPI polarizing microscope.

The objective lens shows no signs of use - it is in perfect cosmetic and optical condition. Items in this condition are rarely found on the secondary market.

Manufacturer: Meopta
Model: P12 0,45-oo/0
Magnification: ?
Numerical aperture: 0.45
Tube: infinity (oo)
Immersion: ?
Coverslip: no

The RMS thread objective is mounted in a centered adapter (holder), which allows:
- precise centering of the objective relative to the optical axis,
- use of the objective in microscopes with EPI (polarized) reflected illumination,
e.g.:
- Meopta RU-2
- Meopta DRU-3

The objective can be unscrewed at any time, and another RMS thread objective can be screwed into the adapter.

According to Meopta documentation (DRU-3 microscope brochure), the objective mounted in this adapter can be centered within a range of approximately +/- 0.7 mm relative to the observation axis.

What is this part needed for?

• If you have a Meopta polarization microscope and need an objective lens with this magnification
• If you only need a objective adapter to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope objective
• Meopta RU2 P12 0.45-oo/0 Pol Objektiv
• Meopta RU2 12x polarizing objective with centering adapter
• Meopta DRU-3 Pol Objektiv 12x Auflicht
• Meopta RU2 Pol-Mikroskop Auflicht
• Meopta DRU-3 reflected light polarizing objective 12x
• Meopta Pol Objektiv Pilz - Ersatz
• obiektyw mikroskopowy polaryzacyjny Meopta 12x
• polarizační objektiv Meopta RU2 P12 0.45-oo/0
• objetivo de polarización Meopta 12x
• objetivo Pol luz reflejada Meopta RU2
• obiettivo polarizzazione Meopta 12x
• obiettivo Pol luce riflessa Meopta RU2
• Meopta buy spare parts

This is description of this part:

Objective lens with centered objective adapter for the Meopta EPI polarizing microscope.

The objective lens shows no signs of use - it is in perfect cosmetic and optical condition. Items in this condition are rarely found on the secondary market.

Manufacturer: Meopta
Model: P6 0,25-oo/0
Magnification: ?
Numerical aperture: 0.25
Tube: infinity (oo)
Immersion: ?
Coverslip: no

The RMS thread objective is mounted in a centered adapter (holder), which allows:
- precise centering of the objective relative to the optical axis,
- use of the objective in microscopes with EPI (polarized) reflected illumination,
e.g.:
- Meopta RU-2
- Meopta DRU-3

The objective can be unscrewed at any time, and another RMS thread objective can be screwed into the adapter.

According to Meopta documentation (DRU-3 microscope brochure), the objective mounted in this adapter can be centered within a range of approximately +/- 0.7 mm relative to the observation axis.

What is this part needed for?

• If you have a Meopta polarization microscope and need an objective lens with this magnification
• If you only need a objective adapter to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope objective
• Meopta RU2 P6 0.25-oo/0 Pol Objektiv
• Meopta RU2 6x polarizing objective with centering adapter
• Meopta DRU-3 Pol Objektiv 6x Auflicht
• Meopta RU2 Pol-Mikroskop Auflicht
• Meopta DRU-3 reflected light polarizing objective 6x
• Meopta Pol Objektiv Pilz - Ersatz
• obiektyw mikroskopowy polaryzacyjny Meopta 6x
• polarizační objektiv Meopta RU2 P6 0.25-oo/0
• objetivo de polarización Meopta 6x
• objetivo Pol luz reflejada Meopta RU2
• obiettivo polarizzazione Meopta 6x
• obiettivo Pol luce riflessa Meopta RU2
• Meopta buy spare parts

This is description of this part:

Objective lens with centered objective adapter for the Meopta EPI polarizing microscope.

The objective lens shows no signs of use - it is in perfect cosmetic and optical condition. Items in this condition are rarely found on the secondary market.

Manufacturer: Meopta
Model: P6 0,15
Magnification: ?
Numerical aperture: 0.15
Tube: infinity (oo)
Immersion: ?
Coverslip: no

The RMS thread objective is mounted in a centered adapter (holder), which allows:
- precise centering of the objective relative to the optical axis,
- use of the objective in microscopes with EPI (polarized) reflected illumination,
e.g.:
- Meopta RU-2
- Meopta DRU-3

The objective can be unscrewed at any time, and another RMS thread objective can be screwed into the adapter.

According to Meopta documentation (DRU-3 microscope brochure), the objective mounted in this adapter can be centered within a range of approximately +/- 0.7 mm relative to the observation axis.

What is this part needed for?

• If you have a Meopta polarization microscope and need an objective lens with this magnification
• If you only need a objective adapter to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope objective
• Meopta RU2 P6 0.15 Pol Objektiv
• Meopta RU2 6x polarizing objective 0.15 with centering adapter
• Meopta DRU-3 Pol Objektiv 6x Auflicht
• Meopta RU2 Pol-Mikroskop Auflicht
• Meopta DRU-3 reflected light polarizing objective 6x
• Meopta Pol Objektiv Pilz - Ersatz
• obiektyw mikroskopowy polaryzacyjny Meopta 6x
• polarizační objektiv Meopta RU2 P6 0.15
• objetivo de polarización Meopta 6x
• objetivo Pol luz reflejada Meopta RU2
• obiettivo polarizzazione Meopta 6x
• obiettivo Pol luce riflessa Meopta RU2
• Meopta buy spare parts

This is description of this part:

Compensating Insert for a 1/4 Lambda Polarizing/Petrographic Microscope (Quarter Wave Plate) with a Quartz R I Compensator

The insert I'm offering here is from a Meopta RU-2 microscope, but from what I understand, it also fits the DRU-3. I also saw an older Meopta polarizing microscope with a vertically oriented head?and it probably uses the same insert standard.

According to Meopta documentation (DRU-3 microscope brochure), this insert has the following parameters:
- 1/4 Lambda 147 ~ um
- R I 551 ~ um
- Dimensions 4 x 12 mm

What is this part needed for?

• If you have a polarizing microscope and you are missing these compensators on the slider

What category does this part belong to?

Sliders [ link ] [More Sliders]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta DRU-3
• Meopta RU2

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 Kompensator Lambda/4 und Quarz Rot I
• Meopta RU2 quarter-wave plate and quartz red I compensator insert
• Meopta DRU-3 polarisation microscope
• Meopta DRU-3 Pol Kompensator Schieber
• Meopta petrographic microscope compensator
• Meopta RU-2 Kompensator fehlt - Ersatz
• kompenzátor lambda/4 a červeň I Meopta RU2
• compensador lambda/4 y rojo I Meopta RU2
• compensador microscopio petrográfico Meopta
• compensatore lambda/4 e rosso I Meopta RU2
• compensatore microscopio petrografico Meopta
• Meopta buy spare parts

This is description of this part:

Eyepiece for a polarizing microscope.

Manufacturer: Meopta
Model: H4x PO
Magnification: 4x
Mounting diameter: 23.2 mm
Inside: crosshair

The eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

What is this part needed for?

• if you need a microscope eyepiece with a polarizing cross
• if this particular eyepiece model is missing from your set

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Epityp-2
• Carl Zeiss Jena Epignost
• PZO Biolar
• PZO MET-3
• Lomo MIN-8
• Lomo Polam R-113
• Lomo Polam L-213
• Zeiss Standard GFL
• IOR MC-7
• Hertel & Reuss Metall
• Leitz Laborlux S
• ROW Poladun

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope eyepiece
• okular mikroskopowy polaryzacyjny Meopta 4x
• Meopta H4x PO Okular mit Fadenkreuz fokussierbar
• Meopta H4x PO polarizing eyepiece focusable crosshair
• Meopta DRU-3 Pol Okular 4x 23.2 mm
• Carl Zeiss Jena Lumipan / Nf Pol Okular Fadenkreuz
• Carl Zeiss Jena Amplival polarizing eyepiece 4x
• Meopta Okular Pilz - Ersatz
• polarizační okulár Meopta H4x se záměrným křížem
• ocular de polarización Meopta H4x con retícula
• ocular con cruz para microscopio PZO Biolar
• oculare polarizzazione Meopta H4x con reticolo
• oculare con croce per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

Eyepiece for a polarizing microscope.

Manufacturer: Meopta
Model: P10x PO
Magnification: 10x
Mounting diameter: 23.2 mm
Inside: crosshair

The eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

What is this part needed for?

• if you need a microscope eyepiece with a polarizing cross
• if this particular eyepiece model is missing from your set

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Epityp-2
• Carl Zeiss Jena Epignost
• PZO Biolar
• PZO MET-3
• Lomo MIN-8
• Lomo Polam R-113
• Lomo Polam L-213
• Zeiss Standard GFL
• IOR MC-7
• Hertel & Reuss Metall
• Leitz Laborlux S
• ROW Poladun

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope eyepiece
• okular mikroskopowy polaryzacyjny Meopta 10x
• Meopta P10x PO Okular mit Fadenkreuz fokussierbar
• Meopta P10x PO polarizing eyepiece focusable crosshair
• Meopta DRU-3 Pol Okular 10x 23.2 mm
• Carl Zeiss Jena Lumipan / Nf Pol Okular Fadenkreuz
• Carl Zeiss Jena Amplival polarizing eyepiece 10x
• Meopta Okular Pilz - Ersatz
• polarizační okulár Meopta P10x se záměrným křížem
• ocular de polarización Meopta P10x con retícula
• ocular con cruz para microscopio PZO Biolar
• oculare polarizzazione Meopta P10x con reticolo
• oculare con croce per microscopio Carl Zeiss Jena Lumipan
• Meopta buy spare parts

This is description of this part:

Eyepiece for a polarizing microscope.

Manufacturer: Meopta
Model: P15x PO
Magnification: 15x
Mounting diameter: 23.2 mm
Inside: crosshair

The eyepiece has a worm thread (focus), which allows you to
- sharpen the crosshair image
- or completely remove the crosshair from the image.

The 23.2 mm mounting diameter means this eyepiece can be used with almost any biological / stereo / polarizing microscope - as long as it has a head for eyepieces of this diameter.

What is this part needed for?

• if you need a microscope eyepiece with a polarizing cross
• if this particular eyepiece model is missing from your set

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Epityp-2
• Carl Zeiss Jena Epignost
• PZO Biolar
• PZO MET-3
• Lomo MIN-8
• Lomo Polam R-113
• Lomo Polam L-213
• Zeiss Standard GFL
• IOR MC-7
• Hertel & Reuss Metall
• Leitz Laborlux S
• ROW Poladun

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta RU2 polarization microscope eyepiece
• okular mikroskopowy polaryzacyjny Meopta 15x
• Meopta P15x PO Okular mit Fadenkreuz fokussierbar
• Meopta P15x PO polarizing eyepiece focusable crosshair
• Meopta DRU-3 Pol Okular 15x 23.2 mm
• Carl Zeiss Jena Lumipan / Nf Pol Okular Fadenkreuz
• Carl Zeiss Jena Amplival polarizing eyepiece 15x
• Meopta Okular Pilz - Ersatz
• polarizační okulár Meopta P15x se záměrným křížem
• ocular de polarización Meopta P15x con retícula
• ocular con cruz para microscopio PZO Biolar
• oculare polarizzazione Meopta P15x con reticolo
• oculare con croce per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

Measuring eyepiece for biological and measurement microscopes.

The eyepiece fits any microscope from any manufacturer. It can be used with either transmitted or reflected light microscopes, as long as the eyepiece mounting diameter on the microscope head is 23.2 mm.

Manufacturer: Meopta
Model: H8x M10
Magnification: 8x
Image: micrometer
Mounting diameter: 23.2 mm

The eyepiece features diopter adjustment and image sharpness adjustment on a micrometer slide.

What is this part needed for?

• if you need to make measurements on your microscope, surface defects, spores, crystals and everything else

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Vertival
• Carl Zeiss Jena Metaval
• Carl Zeiss Jena Epityp-2
• Carl Zeiss Jena Epignost
• Carl Zeiss Jena Telaval
• Carl Zeiss Jena Technival-2
• Carl Zeiss Jena Citoval-2
• PZO Biolar
• PZO Studar
• PZO MB-30
• PZO MET-3
• Lomo Biolam
• Zeiss Standard 14
• Zeiss Standard WL
• Zeiss Universal
• Hertel & Reuss Metall
• Will Wetzlar V300
• Leitz Laborlux S
• Leitz Laborlux 11 Pol S
• Vickers M72

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta H8x M10 measuring microscope eyepiece
• Meopta H8x M10 Mikroskop Messokular
• Meopta H8x M10 Okular mit Skala 23.2 mm
• Carl Zeiss Jena Amplival / Vertival Messokular
• Lomo Biolam measuring eyepiece 8x
• Meopta DRU-3 micrometer eyepiece
• okulár s měřítkem Meopta H8x M10
• ocular micrométrico Meopta H8x M10
• ocular de medición para microscopio PZO Biolar
• oculare micrometrico Meopta H8x M10
• oculare di misura per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

These eyepieces are in excellent optical condition and show no signs of wear.

Manufacturer: Meopta
Type: Huygens
Magnification: 6x
Mounting diameter: 23.2 mm

6x (and 8x) eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 6x/8x eyepieces provide the best image and optimal magnification.

What is this part needed for?

• if you don't have these eyepieces in your set
• if you have a head with its own 1.5x or 1.6x magnification and need the appropriate eyepieces, 6x are the right ones
• if you want to replace your poor-quality eyepieces

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Eduval-4
• Carl Zeiss Jena Laboval-4
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• PZO Biolar
• Zeiss Standard 14
• Hertel & Reuss CN-fl
• Will Wetzlar V200
• Praktycznie każdy 160 Praktycznie każdy z TL = 160 mm

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta H6x Mikroskop Okulare Paar 23.2 mm
• Meopta H6x microscope eyepieces pair
• Meopta Huygens Okulare 6x
• Carl Zeiss Jena Lumipan / Nf Okulare 6x Meopta
• Carl Zeiss Jena Amplival / Ergaval eyepieces 6x
• Meopta RU2 / DRU-3 Okulare
• Meopta Okular Pilz - Ersatz
• okuláry Meopta H6x 23.2 mm
• oculares Meopta H6x 23.2 mm
• oculares 6x para microscopio PZO Biolar
• oculari Meopta H6x 23.2 mm
• oculari 6x per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

Manufacturer: Meopta
Magnification: 10x
Mounting diameter: 23.2 mm

What is this part needed for?

• if you don't have these eyepieces in your set
• if you want to replace your poor-quality eyepieces

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Eduval-4
• Carl Zeiss Jena Laboval-4
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• PZO Biolar
• Zeiss Standard 14
• Hertel & Reuss CN-fl
• Will Wetzlar V200
• Praktycznie każdy 160 Praktycznie każdy z TL = 160 mm

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta P10x Mikroskop Okulare Paar 23.2 mm
• Meopta P10x microscope eyepieces pair
• Meopta P Okulare 10x
• Carl Zeiss Jena Lumipan / Nf Okulare 10x Meopta
• Carl Zeiss Jena Amplival / Ergaval eyepieces 10x
• Meopta RU2 / DRU-3 Okulare
• Meopta Okular Pilz - Ersatz
• okuláry Meopta P10x 23.2 mm
• oculares Meopta P10x 23.2 mm
• oculares 10x para microscopio PZO Biolar
• oculari Meopta P10x 23.2 mm
• oculari 10x per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

Manufacturer: Meopta
Magnification: 15x
Mounting diameter: 23.2 mm

What is this part needed for?

• if you don't have these eyepieces in your set
• if you want to replace your poor-quality eyepieces

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Meopta - Meopta s.r.o. [ link ] [More from Meopta]
• - Meopta Praha
• - Meopta Prerov
• - Optikotechna

What microscope does this part come from?

Mikroskop Meopta RU2 [ link ] [More from RU2]

What microscopes or components is this part compatible with?

• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Eduval-4
• Carl Zeiss Jena Laboval-4
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• PZO Biolar
• Zeiss Standard 14
• Hertel & Reuss CN-fl
• Will Wetzlar V200
• Praktycznie każdy 160 Praktycznie każdy z TL = 160 mm

Names, descriptions, terms, and search contexts under which this part is searched.

• Meopta RU2 microscope repair parts
• Meopta P15x Mikroskop Okulare Paar 23.2 mm
• Meopta P15x microscope eyepieces pair
• Meopta P Okulare 15x
• Carl Zeiss Jena Lumipan / Nf Okulare 15x Meopta
• Carl Zeiss Jena Amplival / Ergaval eyepieces 15x
• Meopta RU2 / DRU-3 Okulare
• Meopta Okular Pilz - Ersatz
• okuláry Meopta P15x 23.2 mm
• oculares Meopta P15x 23.2 mm
• oculares 15x para microscopio PZO Biolar
• oculari Meopta P15x 23.2 mm
• oculari 15x per microscopio PZO Biolar
• Meopta buy spare parts

This is description of this part:

Microscope objective with RMS thread and 40x magnification, featuring increased numerical aperture, designed for water immersion and optimized optical correction for fluorescence illumination.

Manufacturer: LOMO
Model: WI 40 0.75 L
Magnification: 40x
Numerical aperture: 0.75
Optical correction: achromat, optimized for fluorescence microscopy
Tube length: 160 mm
Focal length: approx. 33 mm
Immersion: water
Designation: L = luminescence
Thread: RMS
Year of manufacture: 1974

Despite the L designation, the objective can of course also be used with standard transmitted light illumination.

LOMO objectives marked with L luminescence differ from non-marked versions by:
- improved transmission in the UV and blue spectral range
- reduced autofluorescence of optical glass
- no or strongly reduced use of organic adhesives in the optical assembly

What is this part needed for?

• If you want to upgrade your Lomo microscope with original parts
• If you need a 40x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
• If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives
• If you don't like oil immersion but want better image quality than standard, dry 40x objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo ML-2 [ link ] [More from ML-2]

What microscopes or components is this part compatible with?

• Lomo ML-2
• Lomo Biolam
• Lomo Biolam D11
• Lomo MBI-1
• Lomo MBR-3
• IOR ML-4M
• Carl Zeiss Jena Lg
• Carl Zeiss Jena Lumipan
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo ML-2 microscope repair parts
• Lomo ML-2 luminescence microscope objective
• Lomo ML-2 Lumineszenz Mikroskopobjektiv
• Lomo ML-2 fluorescence microscope objective
• Lomo ML-2 Fluoreszenz Mikroskopobjektiv
• Lomo WI 40 0.75 L Lumineszenz Wasserimmersion Objektiv 1974
• Lomo WI 40x fluorescence water immersion objective
• Lomo Biolam 40x Objektiv Wasserimmersion
• Bresser Biolam WI 40 0.75 L Objektiv
• Carl Zeiss Jena Lumipan 40x water immersion objective
• LOMO WI 40 0.75 L 33 mm RMS objective
• ЛОМО WI 40 0.75 L объектив
• LOMO 40x Frontlinse zerkratzt - Ersatz
• objektiv LOMO WI 40x vodní imerze a Zeiss Jena
• objetivo LOMO WI 40 0.75 L inmersión en agua
• objetivo 40x para microscopio Lomo Biolam
• obiettivo LOMO WI 40 0.75 L ad immersione in acqua
• obiettivo 40x per microscopio Carl Zeiss Jena Lg
• Lomo buy spare parts

This is description of this part:

Microscope objective with RMS thread, 30x magnification, very high, variable numerical aperture, built-in iris diaphragm, designed for water immersion and improved correction for fluorescence illumination.

Manufacturer: Lomo
Model: WI 30x0.90 L
Manufacturer code: O5V-30L
Magnification: 30x
Numerical aperture: variable from 0.65 to 0.90
Iris diaphragm: yes, built-in
Optical correction: achromat + fluorescence
Tube length: 160 mm
Focal length: 33 mm
Immersion: yes, water
Cover glass: yes, 0.17 mm
Marking: "L" = luminescence
Thread: RMS
Year of manufacture: 1974

This is a rare, professional microscope objective with a very wide range of applications. Main features that make this objective exceptional:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (up to 0.90) provides high-resolution images
- Built-in iris diaphragm allows adjustment of the aperture

Despite the "L" marking, the objective can of course also be used with standard illumination.

LOMO objectives with the "L" luminescence marking differ from those without this symbol by:
- Improved transmission in the UV and blue spectral range
- Lower glass autofluorescence
- No or strongly reduced use of organic adhesives

What is this part needed for?

• If you want to upgrade your Lomo microscope with original parts
• If you need a 30x water immersion objective lens for Lomo, Carl Zeiss Jena, PZO, IOR, or other microscopes requiring 33mm and 160mm lenses
• If you have a Lomo microscope from 1974 (the serial number begins with "74") and want original-era objectives
• If you don't like oil immersion but want better image quality than standard, dry 30x objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo ML-2 [ link ] [More from ML-2]

What microscopes or components is this part compatible with?

• Lomo ML-2
• Lomo Biolam
• Lomo Biolam D11
• Lomo MBI-1
• Lomo MBR-3
• IOR ML-4M
• Carl Zeiss Jena Lg
• Carl Zeiss Jena Lumipan
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo ML-2 microscope repair parts
• Lomo ML-2 luminescence microscope objective
• Lomo ML-2 Lumineszenz Mikroskopobjektiv
• Lomo ML-2 fluorescence microscope objective
• Lomo ML-2 Fluoreszenz Mikroskopobjektiv
• Lomo 30x 0.90 Fluoreszenz Wasserimmersion Mikroskopobjektiv mit Irisblende
• Lomo 30x 0.90 fluorescence water immersion microscope objective iris diaphragm
• Lomo Biolam 30x Objektiv Wasserimmersion
• Bresser Biolam WI 30x 0.90 L Objektiv
• Carl Zeiss Jena Lumipan 30x water immersion objective
• LOMO WI 30x 0.90 L 33 mm RMS objective
• ЛОМО WI 30x 0.90 L объектив
• LOMO 30x Frontlinse zerkratzt - Ersatz
• objektiv LOMO WI 30x s irisovou clonou
• objetivo LOMO WI 30x 0.90 L inmersión en agua
• objetivo 30x para microscopio Lomo Biolam
• obiettivo LOMO WI 30x 0.90 L ad immersione in acqua
• obiettivo 30x per microscopio Carl Zeiss Jena Lg
• Lomo buy spare parts

This is description of this part:

Apochromatic RMS microscope objective with 60x magnification, very high numerical aperture, designed for use without a cover slip, with water immersion and improved correction for fluorescence illumination.

Manufacturer: Lomo
Model: APO-WI 60x1.0 D=0 L
Magnification: 60x
Numerical aperture: 1.0
Correction: Apochromat + fluorescence
Tube length: 160 mm (?)
Focal length: 33 mm (?)
Immersion: water
Cover slip: no (!)
Marking: "L" = luminescence
Marking: "D=0" = use without cover slip
Thread: RMS
Year of manufacture: 1975

Apochromatic objectives are known for exceptional color fidelity, significantly better than achromatic objectives.

This objective is extremely rare on the secondary market and highly professional. Key features:
- Water immersion is preferred by many users over oil immersion
- Very high numerical aperture (1.0) provides high-resolution images
- Use without cover slip allows, for example, direct placement of the objective inside a droplet with the sample to be observed

Despite the "L" marking, the objective can also be used with normal transmitted light illumination.

Lomo objectives marked "L" (luminescence) differ from those without this symbol by:
- Improved UV and blue light transmission
- Lower autofluorescence of the glass
- No or reduced use of organic adhesives in the optical assembly

What is this part needed for?

• If you need an apochromatic objective to obtain an image with better color
• If you want to upgrade your Lomo microscope with original parts
• If you need a 60x water immersion objective for Lomo, Carl Zeiss Jena, PZO, IOR or other microscopes requiring 33 mm and 160 mm objectives
• If you need an objective to work without a cover slip but with water immersion (e.g. to observe inside a drop of water)
• If you have a Lomo microscope from 1975 (serial number starts with "75") and want period-correct objectives
• If you do not like oil immersion but want better image quality than standard 60x dry objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo ML-2 [ link ] [More from ML-2]

What microscopes or components is this part compatible with?

• Lomo ML-2
• Lomo Biolam
• Lomo Biolam D11
• Lomo MBI-1
• Lomo MBR-3
• IOR ML-4M
• Carl Zeiss Jena Lg
• Carl Zeiss Jena Lumipan
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo ML-2 microscope repair parts
• Lomo ML-2 luminescence microscope objective
• Lomo ML-2 Lumineszenz Mikroskopobjektiv
• Lomo ML-2 fluorescence microscope objective
• Lomo ML-2 Fluoreszenz Mikroskopobjektiv
• Lomo Apo-WI 60x 1.0 Fluoreszenz Wasserimmersion Apochromat ohne Deckglas
• Lomo Apo-WI 60x 1.0 apochromat fluorescence water immersion objective
• Lomo Biolam 60x Objektiv Wasserimmersion
• Bresser Biolam Apo-WI 60x 1.0 D=0 L Objektiv
• Carl Zeiss Jena Lumipan 60x water immersion objective
• LOMO Apo-WI 60x 1.0 D=0 L 33 mm RMS objective
• ЛОМО Apo-WI 60x 1.0 D=0 L объектив
• LOMO 60x Frontlinse zerkratzt - Ersatz
• apochromatický objektiv LOMO Apo-WI 60x
• objetivo LOMO Apo-WI 60x 1.0 D=0 L inmersión en agua
• objetivo 60x para microscopio Lomo Biolam
• obiettivo LOMO Apo-WI 60x 1.0 D=0 L ad immersione in acqua
• obiettivo 60x per microscopio Carl Zeiss Jena Lg
• Lomo buy spare parts

This is description of this part:

These eyepieces are in excellent optical condition.

Manufacturer: Lomo
Model: LM-2 K5x
Type: compensating eyepieces
Magnification: 5x
Mount diameter: 23.2 mm

Compensating 5x eyepieces are very often used as projection eyepieces for microscope photography.

What is this part needed for?

• if you don't have these eyepieces in your set
• if you want to replace your poor-quality eyepieces
• Compensating 5x eyepieces are very often used as projection eyepieces for microscope photography

What category does this part belong to?

Eyepieces [ link ] [More Eyepieces]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo ML-2 [ link ] [More from ML-2]

What microscopes or components is this part compatible with?

• Lomo ML-2
• Meopta RU2
• Meopta DRU-3
• Carl Zeiss Jena Lumipan
• Carl Zeiss Jena Nf
• Carl Zeiss Jena Eduval-4
• Carl Zeiss Jena Laboval-4
• Carl Zeiss Jena Amplival
• Carl Zeiss Jena Ergaval
• PZO Biolar
• Zeiss Standard 14
• Hertel & Reuss CN-fl
• Will Wetzlar V200
• Praktycznie każdy 160 Praktycznie każdy z TL = 160 mm

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo ML-2 microscope repair parts
• Lomo ML-2 K5x Kompensationsokulare 23.2 mm
• Lomo ML-2 K5x compensating eyepieces pair
• Lomo LM-2 K5x Okulare Paar
• Carl Zeiss Jena Lumipan / Nf Okulare 5x Lomo
• Carl Zeiss Jena Amplival compensating eyepieces 5x
• Meopta RU2 / DRU-3 Okulare 5x
• Lomo Okular Pilz - Ersatz
• kompenzační okuláry Lomo K5x
• oculares compensadores Lomo K5x
• oculares 5x para microscopio PZO Biolar
• oculari compensatori Lomo K5x
• oculari 5x per microscopio Carl Zeiss Jena Lumipan
• Lomo buy spare parts

This is description of this part:

Complete knob system and mechanism forming the precision movement system (fine focus / micro-drive).

Compatible with microscopes:
- biological microscope LOMO MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

What is this part needed for?

• As a service part - very often individual elements in this mechanism are damaged

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo MBB-1 Feintrieb komplett mit Knöpfen
• Lomo MBB-1 microscope complete fine focus system with knobs
• Lomo MIN-8 Polarisationsmikroskop Feintrieb komplett mit Knöpfen
• Lomo MIN-8 polarizing microscope complete fine focus system with knobs
• Lomo MBB-1A Feintrieb komplett mit Knöpfen Ersatzteil
• Lomo MBB-1 Feintrieb defekt - neufetten
• Lomo MIN-8 fine focus not working - repair
• ЛОМО МББ-1 МИН-8 запчасть
• jemné ostření s knoflíky Lomo MBB-1
• enfoque fino con mandos microscopio Lomo MBB-1
• repuesto microscopio polarizante Lomo MIN-8
• micrometrica con manopole microscopio Lomo MBB-1
• ricambio microscopio polarizzatore Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

Service components of the roller guide mechanism forming the coarse movement system (coarse focus / macro drive) in the microscope.

Compatible with microscopes:
- biological microscope LOMO MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

What is this part needed for?

• As a service part

What category does this part belong to?

Service and spare parts [ link ] [More Service and spare parts]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo MIN-8 [ link ] [More from MIN-8]

What microscopes or components is this part compatible with?

• Lomo MIN-8
• Lomo MBB-1

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo MIN-8 microscope repair parts
• Lomo MBB-1 Grobtrieb Rollenführung
• Lomo MBB-1 microscope coarse focus roller linear bearing
• Lomo MIN-8 Polarisationsmikroskop Grobtrieb Rollenführung
• Lomo MIN-8 polarizing microscope coarse focus roller linear bearing
• Lomo MBB-1A Grobtrieb Rollenführung Ersatzteil
• Lomo MBB-1 Grobtrieb hakt - Rollenführung
• Lomo MIN-8 coarse focus rough - roller guide replacement
• ЛОМО МББ-1 МИН-8 запчасть
• válečkové vedení hrubého ostření Lomo MBB-1
• guía de rodillos enfoque macro microscopio Lomo MBB-1
• repuesto microscopio polarizante Lomo MIN-8
• guida a rulli messa a fuoco macro microscopio Lomo MBB-1
• ricambio microscopio polarizzatore Lomo MIN-8
• Lomo buy spare parts

This is description of this part:

Red Filter for the Filter Turret of the Lomo ML-2 Fluorescence Microscope

Manufacturer: Lomo
Type: Fluorescence Filter
Color: Red
Diameter: 17 mm
Thickness: 2 mm

This filter is originally glued into the filter wheel located in the microscope above the objective turret.

What is this part needed for?

• if this filter is missing from the filter wheel, e.g., because it broke or came off over the years
• if you have such a filter but it is of poor quality, cracked, scratched, or delaminated
• if you need a 17-mm red filter for other purposes

What category does this part belong to?

Filters [ link ] [More Filters]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo ML-2 [ link ] [More from ML-2]

What microscopes or components is this part compatible with?

• Lomo ML-2

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo ML-2 microscope repair parts
• Lomo ML-2 microscope fluorescence filter
• Lomo ML-2 Fluoreszenz Mikroskop Filter
• Lomo ML-2 Rotfilter Filterrevolver
• Lomo ML-2 red fluorescence filter for filter turret
• Lomo ML-2 Lumineszenz Filter rot fehlt - Ersatz
• ЛОМО МЛ-2 светофильтр красный
• červený fluorescenční filtr Lomo ML-2
• filtro de fluorescencia rojo Lomo ML-2
• filtro para microscopio de fluorescencia Lomo ML-2
• filtro fluorescenza rosso Lomo ML-2
• filtro per microscopio a fluorescenza Lomo ML-2
• Lomo buy spare parts

This is description of this part:

Lomo microscope objective for polarization.

Ideal external condition and perfect optical condition. It is not easy to find an objective in this condition on the second-hand market.

Manufacturer: Lomo
Magnification: 95x
Model: MI 95x 1,25 190-P
Numerical Aperture: 1,25
Tube length: 190 mm
Focal length: (?)
Cover slip: yes, 0,17 mm (?)
Thread: RMS + Pol adapter
Marking: "P" = Polarization
Marking: "MI" = Oil immersion

This objective is for use with transmitted or reflected light with a cover slip (although I am not sure if it definitely requires a cover slip).

This specific item was used with the Lomo Polam P-312 microscope, i.e., with an EPI reflected light illuminator.

The RMS-thread objective is mounted on a suitable sleeve that allows using the objective in Lomo MIN-6 / Lomo MIN-8 / Lomo MIN-1 / Lomo Polam microscopes. Of course, the objective can be unscrewed and another objective can be screwed into the sleeve.

The Pol adapter also allows centering the objective relative to the entire optical path - this requires tools (wrenches / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - but I have not personally checked this.

What is this part needed for?

• If you have a polarisation microscope and need an objective lens with this magnification
• If you only need a slider to use with other objectives

What category does this part belong to?

Objective [ link ] [More Objective]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More from Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Polam R-311 [ link ] [More from Polam R-311]

What microscopes or components is this part compatible with?

• Lomo Polam R-311
• Lomo MIN-8
• Lomo Polam L-213
• Lomo MIN-6
• Lomo MIN-1
• Lomo Polam R-113
• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo MIN-5
• Lomo MIN-4

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Polam R-311 microscope repair parts
• obiektyw mikroskopowy polaryzacyjny Lomo MI 95x
• Lomo MI 95x 1.25 190-P Pol Öl Objektiv
• Lomo MI 95x oil polarizing objective with Pol RMS adapter
• Lomo Polam R-311 / L-213 Pol Objektiv 95x
• Lomo MIN-8 / MIN-6 polarizing oil objective 95x
• Lomo petrographic microscope objective 95x oil
• Lomo 95x Öl Frontlinse zerkratzt - Ersatz
• polarizační objektiv Lomo MI 95x olejová imerze
• objetivo de polarización Lomo MI 95x aceite
• objetivo Pol microscopio petrográfico Lomo Polam
• obiettivo polarizzazione Lomo MI 95x a olio
• obiettivo Pol microscopio petrografico Lomo Polam
• Lomo buy spare parts